Modular Washroom Fittings for Education

Modular Washroom Fittings for Education

ONVO originated from many years assisting architects with the design of school washrooms at Lovair. We recognised that we could be part of enhancing children’s experience at school and have a positive impact on the quality of their education. Lovair separated their education sector as a new company as of January 2018 to create greater clarity of focus and provide customer experience tailored to this sector.

The Lovair Latherwash® trough has been known and trusted by both architects and contractors for almost a decade because of its high quality and ease of installation.

ONVO are committed to supplying only the highest quality products, backed up by a consistent, honest service by always keeping our promises.

We hope this brochure is useful when specifying and we trust the case studies are inspirational. School washrooms are our genuine passion and we would be delighted to discuss any ideas or challenges you may have. Please call us on 0161 302 5340 or email us at [email protected].

CONTENTS

Latherwash 2WLatherwash 2D Latherwash 2D with Modular Frame Latherwash 2NCurvewash 2WCurvewash 2D180 Sensor Tap140 Sensor Tap480 Soap DispenserSoap Systems766 Soap DispenserSoap SystemsV22 Soap Dispenser787 Toilet Roll Holder89 Hand Dryer735 Paper Towel DispenserWash Fountains

5791112131515171719192121232324

ONVO…THE NEW NAME INSCHOOL WASHROOMS.

The ONVO Latherwash 2W is ideal for educational facilities where the wall build up can be designed to accommodate a 150mm void behind the trough. This is the slimmest trough in the ONVO range at only 307mm deep, with all the pipework and wires concealed in the void behind. No boxing in underneath is required, lending itself to a minimalistic floating effect.

Product Codes:

Code Length* Users Brackets Weight

602W 600mm 1 2 25Kg1202W 1200mm 2 3 40Kg1802W 1800mm 3 4 56Kg2402W 2400mm 4 5 71Kg3002W 3000mm 5 6 87Kg

*Bespoke lengths also available if required

+44 (0)161 302 [email protected]

4 / 5

Archbishop McGrathBridgend

Dreghorn Primary SchoolNorth Ayrshire

Whatriggs Primary SchoolEast Ayrshire

CASE STUDIES LATHERWASH 2W

Length

200

500

300

300

300

300

150mm Minimum Cavity

Fixing Locations

307

250

9021

0

Inst

allt

ion

Heig

ht158

116

600

600

600

600

300

270

307

24

Bracket Positions

Installation Heights:

Junior – 700mmKS3 – 800mmKS4 – 850mm

180 Sensor TapPage 15

480 Soap DispenserPage 17

Related Products:

The ONVO Latherwash 2D is perfect for installing directly onto a solid wall. The taps are mounted onto the deck of the trough and therefore no void is required behind. The Latherwash 2D is very slim, only projecting 400mm from the wall and can be used with the complimentary ONVO Modular Frame System to conceal the pipework and wires underneath, see page 9.

Product Codes:


602D 600mm 1 2 27Kg1202D 1200mm 2 3 42Kg1802D 1800mm 3 4 58Kg2402D 2400mm 4 5 73Kg3002D 3000mm 5 6 88Kg


CASE STUDIES LATHERWASH 2D

Length

300

300

300

8090

7827

038

116

400

9021

0

158

338

380

398

300

600

600

600

600

Bracket Positions

Fixing Locations

For installation heights lower than 700mm, please refer to page 11.

St Luke’s Primary SchoolManchester

The Deans Primary SchoolManchester

Lagerkvists Skola


6 / 7



Related Products:Inst

allt

ion

Heig

ht



The ONVO Latherwash 2D with Modular Frame is designed for installations where the pipework below the trough needs to be concealed or where the trough cannot be cantilevered off the wall. The taps are mounted onto the deck of the trough and therefore no void is required behind. The Latherwash 2D with Modular Frame is very slim, only projecting 400mm from the wall.

Product Codes:

Code Length* Users

602D/MF 600mm 11202D/MF 1200mm 21802D/MF 1800mm 32402D/MF 2400mm 43002D/MF 3000mm 5


Heath ParkWolverhampton

CASE STUDIES LATHERWASH 2DWITH MODULAR FRAME


8 / 9

For installation heights lower than 700mm, please refer to page 11.



300

7870

0

55 545 30

300

250

270

38

398

300 600600



Related Products:

The ONVO Latherwash 2N is designed for situations where there is no wall void and can be installed as low as 500mm from the floor to the trough rim! This trough always comes with the ONVO Modular Frame System and even when installed as low as 500mm, there is still 300mm underneath for access. This ability to be installed at low height combined with the slimness of the trough, means the sensor taps are easy to use for children as young as 2 years.

Product Codes:

Code Length* Users

602N 600mm 11202N 1200mm 21802N 1800mm 32402N 2400mm 43002N 3000mm 5


Maidens NurserySouth Ayrshire

Annbank Primary SchoolSouth Ayrshire

CASE STUDIES LATHERWASH 2N


10 / 11


Early Years – 500mmInfants – 600mm

For installation heights higher than 600mm, please refer to page 9.

400

500

150

250

300

83 500 83.5

300600 600

Length



Related Products:

The ONVO Curvewash 2D does not have a removable front panel. We recommend this product for installations above 700mm to allow room for access underneath. The Curvewash 2D can be installed directly onto a solid wall projecting only 422mm. This trough can be used with the complimentary ONVO Modular Frame System to conceal the pipework and wires underneath, see page 9.

Product Codes:


60CD 600mm 1 2 28Kg12CD 1200mm 2 2 45Kg18CD 1800mm 3 3 62Kg24CD 2400mm 4 4 79Kg30CD 3000mm 5 5 93Kg


The ONVO Curvewash 2W does not have a removable front panel and can therefore be installed as low as 500mm to the trough rim. This trough requires an accessible 150mm void behind to accommodate for pipework and wires.

Product Codes:


60CW 600mm 1 2 24Kg12CW 1200mm 2 2 40Kg18CW 1800mm 3 3 56Kg24CW 2400mm 4 4 72Kg30CW 3000mm 5 5 88Kg


CURVEWASH 2DCURVEWASH 2W

Length Length

LengthLength

150mm Minimum Cavity

Fixing Locations Fixing Locations

225

300

300

12

422

80

78

213

110

600

600

12

312

600

600

7821

3

300

300

300

250

312

225

250

Guid

e He

ight

s

Guid

e He

ight

s


12 / 13


KS3 – 800mmKS4 – 850mm


Early Years – 500mmInfants – 600mm



Related Products:



Related Products:

Product Codes:

Code Power supply Length Weight Finish

141C Battery 115mm 1.06Kg Chrome142C Mains 115mm 1.06Kg Chrome

The ONVO 180 sensor tap is to the used with the Latherwash 2W Washtrough. At 170mm long, the water hits the centre of the trough eliminating any splashing. Its minimalistic design and robustness makes it ideal for schools. A minimum 150mm void is required behind the tap for the flexi hose and wires.

The ONVO 140 sensor tap is designed to sit on the deck of the Latherwash 2D Washtrough. This is the most robust tap in the ONVO range and with the flexi hose and wires all below, can be installed in situations where a wall void is not achievable.

Product Codes:

Code Power supply Length Weight Finish

181C Battery 170mm 1.16Kg Chrome182C Mains 170mm 1.16Kg Chrome

CASE STUDIES 180 SENSOR TAP

140 SENSOR TAP

Whatriggs Primary SchoolEast Ayrshire

Dreghorn Primary SchoolNorth Ayrshire

Annbank Primary SchoolSouth Ayrshire

Side

Side

Front

Front

12mm min33mm max

Min void150mm

154.4

115

55

43

28

12mm min28mm max

5582

120

23 51

15

10

13170mm


14 / 15

Latherwash 2W page 5480 Soap Dispenser page 17

Latherwash 2D page 7766 Soap Dispenser page 19

Related Products:

Related Products:

Product Codes:

Code Length Weight Finish

480C 120mm 0.5Kg Chrome

Product Codes:

Code Size Feeds

FB1 1 litre 1 *Not compatible with 480 seriesST1 5 litre 1 ST2 5 litre 2 ST3 5 litre 3 ST4 5 litre 4

The ONVO 480 soap dispenser is push operated and designed to complement the 180 sensor tap. The dispenser can be fed via a single or multi-feed system as detailed below. The soap container needs to be situated below the dispenser within a two-meter range. We recommend this being in the void behind the washtrough with easy accessibility.

The ONVO soap system can feed up to four dispensers from one central 5L container. The soap container must be situated underneath the dispenser within two meters and easily accessible.

CASE STUDIES 480 SOAP DISPENSER

SOAP SYSTEMS

Side Front

Min void150mm

12mm min50mm max

94

169

69

120 25

38

228


16 / 17

Latherwash 2W page 5180 Sensor Tap page 15

Related Products:

Product Codes:

Code Length Weight Finish

766C 114mm 0.78Kg Chrome

The ONVO 766 soap dispenser is push operated and complements the 140 sensor tap. Single and multi -feed options are available as detailed below. The soap container must be situated underneath the washtrough within two meters of the dispenser and easily accessible. Our solution for this is the ONVO Modular Frame system on Page 9.

CASE STUDIES 766 SOAP DISPENSER

Side Front

114

73

10

74

84

12mm min55mm max

68

8

21

38

120


18 / 19

Latherwash 2D page 7140 Sensor Tap page 15

Related Products:

Product Codes:

Code Size Feeds

FB1 1 litre 1 *Not compatible with 480 seriesST1 5 litre 1 ST2 5 litre 2 ST3 5 litre 3 ST4 5 litre 4

The ONVO soap system can feed up to four dispensers from one central 5L container. The soap container must be situated underneath the dispenser within two meters and easily accessible.

SOAP SYSTEMS

Product Codes:

Code Capacity Weight Finish

787C 1 Roll 1.66Kg Chrome787CS 1 Roll 1.66Kg Satin

The ONVO 787 is a lockable stainless-steel Jumbo toilet roll holder. Easy to install and robust.

CASE STUDIES

787 TOILET ROLL HOLDER

Product Codes:

Code Capacity Weight Finish V22C 1000ml 1.22Kg ChromeV22CS 1000ml 1.22Kg Satin

The ONVO V22 is a push operated soap dispenser for a standard wall mounted installation. This unit can be installed either above the Washtrough or on the wall anywhere in the washroom.

V22 SOAP DISPENSER

Side

Side

Front

Front

95

77 90

267

1252

308.6

412

318

300

110

267

101


20 / 21

Product Codes:

Code Voltage Frequency Amps Finish

89W 220-240V 50Hz 8A White89C 220-240V 50Hz 8A Chrome89CS 220-240V 50Hz 8A Satin

Product Codes:

Code Capacity Weight Finish

735C 400-600 Paper Towels 2.04Kg Chrome735CS 400-600 Paper Towels 2.04Kg Satin

The Air Fury is well known in the market for its high speed, energy efficient hand drying. The Air Fury is very compact and robust and has the unique feature of noise adjustability.

The ONVO 735 is our solution if paper towels are to be used instead of hand dryers. Lockable, robust and manufactured from stainless-steel, it is the ideal product for schools.

CASE STUDIES 89 HAND DRYER

735 PAPER TOWEL DISPENSER


22 / 23

185 209

124

6523

111°

111°

325

23

375

370

285

Key location

289

Side

Side

Front

Front

8 USER WASH FOUNTAIN


24 / 25

The ONVO Washfountains are designed for secondary schools and particularly open plan washrooms. Washfountains are very robust and ideal for areas with limited wall space. They come with a built in and easily replenished soap dispenser system.

Product Codes:

Code Operation

97CS Push98CS Sensor

The ONVO Washfountains are designed for secondary schools and particularly open plan washrooms. Washfountains are very robust and ideal for areas with limited wall space. They come with a built in and easily replenished soap dispenser system.

Product Codes:

Code Operation

55CS Push56CS Sensor

6 USER WASH FOUNTAIN

89 Hand DryerPage 23

735 Paper Towel DispenserPage 23

Related Products:

Top

Front Side

Top

Front Side

ø930 ø1355Removable lid

Soap refill cap

420

267 10

80

864

697

530

Accessdoor

Manual tapManual soap dispenser

508

211

420

Removable lid

Soap refill cap

267

Access door

Sensor tap

Manual soap dispenser

Fixed to the floor

Fixed to the floor

1/2 BSP Hot and cold water, 2x40mm straight waster and electricity points from below

1/2 BSP Hot and cold water, 2x40mm straight waster and electricity points from below

1080

860

740

530

508

211

89 Hand DryerPage 23

735 Paper Towel DispenserPage 23

Related Products:

Astro House12F Adlington Business ParkLondon South RoadCheshireSK10 4PZUnited Kingdom


LinkedIn: Search ONVO Modular

Astro House12F Adlington Business ParkLondon South RoadSK10 4PZCheshireUnited Kingdom


LinkedIn: Search ONVO Modular

Date post:	16-Oct-2021
Category:	Documents
Upload:	others
View:	0 times
Download:	0 times

Modular Washroom Fittings for Education

Documents