Date post: | 29-Dec-2015 |
Category: |
Documents |
Upload: | cecil-turner |
View: | 225 times |
Download: | 2 times |
Overview
Installing Exchange Server 2003
Installing Exchange Server 2003 in a Clustered Environment
Installing and Using Exchange Management Tools and Utilities
Upgrading from Exchange 2000 Server to Exchange Server 2003
Discussion: Installing and Upgrading to Exchange Server 2003
Video
Lesson: Installing Exchange Server 2003
Hardware and System Requirements for Exchange Server 2003
Environment Requirements Checklist for Exchange Server 2003
Demonstration: How to Run ForestPrep and DomainPrep
Components That Can Be Configured During Setup
Demonstration: How to Install Exchange Server 2003
What Is an Unattended Installation?
How to Perform an Unattended Installation of Exchange Server 2003
How to Verify That Installation of Exchange Server 2003 Was Successful
Hardware and System Requirements for Exchange Server 2003
Minimum Recommended
ProcessorIntel Pentium or compatible 233 MHz
Intel Pentium or compatible 1.6 GHzMultiple processors
Memory 256 MB recommended min 3 to 4 GB of physical RAM
Storage
500 MB for Exchange
200 MB on the system drive
Disk partitions formatted NTFS
CD-ROM drive
Additional disk drives to accommodate database and transaction log files
Operating System
Windows 2000 SP3 or later
Windows Server 2003 family
Windows Server 2003, Enterprise Edition
Environment Requirements Checklist for Exchange Server 2003
Make sure Active Directory and DNS are installed and configured Get appropriate Active Directory permissions Be a member of an Active Directory domain Make sure that computers in the same Exchange organization are also in the same Active Directory forestInstall Exchange 2003 before upgrading to Windows Server 2003 familyRun Windows 2000 SP3 or later or Windows Server 2003 familyRun ForestPrep onceDesignate an Exchange Full Administrator accountCreate an Exchange administrative group structure before installing ExchangeRun DomainPrep to prepare your domains for Exchange Install and configure the appropriate services
Make sure Active Directory and DNS are installed and configured Get appropriate Active Directory permissions Be a member of an Active Directory domain Make sure that computers in the same Exchange organization are also in the same Active Directory forestInstall Exchange 2003 before upgrading to Windows Server 2003 familyRun Windows 2000 SP3 or later or Windows Server 2003 familyRun ForestPrep onceDesignate an Exchange Full Administrator accountCreate an Exchange administrative group structure before installing ExchangeRun DomainPrep to prepare your domains for Exchange Install and configure the appropriate services
Demonstration: How to Run ForestPrep and DomainPrep
Your instructor will show a presentation that demonstrates how to run ForestPrep and DomainPrep
Your instructor will show a presentation that demonstrates how to run ForestPrep and DomainPrep
To run ForestPrep, click
To run DomainPrep, click
Components That Can Be Configured During Setup
Microsoft Exchange Messaging and Collaboration Services
Microsoft Exchange Connector for Lotus NotesMicrosoft Exchange Connector for Novell GroupWiseMicrosoft Exchange Calendar Connector
Microsoft Exchange System Management Tools
Microsoft Exchange 5.5 Administrator
Microsoft Exchange Messaging and Collaboration Services
Microsoft Exchange Connector for Lotus NotesMicrosoft Exchange Connector for Novell GroupWiseMicrosoft Exchange Calendar Connector
Microsoft Exchange System Management Tools
Microsoft Exchange 5.5 Administrator
Administrator
configure
Server
Demonstration: How to Install Exchange Server 2003
Your instructor will show a presentation that demonstrates how to install Exchange Server 2003
Your instructor will show a presentation that demonstrates how to install Exchange Server 2003
What Is an Unattended Installation?
An installation of Exchange 2003 that proceeds and completes without any prompting from a userAn installation of Exchange 2003 that proceeds and completes without any prompting from a user
Unattended installation
install
installinstall
Exchange Server 2003Setup CD plus .ini file
Use it when you:Use it when you:
Install additional Exchange 2003 computers
Install Exchange 2003 System Management Tools
Run DomainPrep
Install additional Exchange 2003 computers
Install Exchange 2003 System Management Tools
Run DomainPrep
How to Perform an Unattended Installation of Exchange Server 2003
Exchange is installed on designated computers
Exchange is installed on designated computers
33
.ini .ini
Run Setup using the .ini fileRun Setup using the .ini file22
Create initialization fileCreate initialization file11
.ini
Administrator
Install
InstallInstall
How to Verify That Installation of Exchange Server 2003 Was Successful
Test Active Directory Users and Computers
Send a test message
Test Exchange System Manager
Use these utilities to troubleshoot, if required:
Services MMC
Event Viewer and the setup log file
Windows Explorer
11
Administrator
ExchangeServer2003
22
33
44
Lesson: Installing Exchange Server 2003 in a Clustered Environment
Multimedia: How Exchange Server 2003 Uses Windows ClusteringHardware Requirements Checklist for an Exchange Server 2003 Cluster Types of Exchange 2003 Cluster ConfigurationsRecommended Exchange Server 2003 Cluster ConfigurationConsiderations for Using ClustersHow Failover Occurs on an Active/Active Cluster vs. an Active/Passive ClusterPermissions Required to Install and Configure an Exchange Virtual ServerDemonstration: How to Install Exchange Server 2003 in a Clustered Environment
Multimedia: How Exchange Server 2003 Uses Windows Clustering
This presentation shows how Exchange Server 2003 can use Windows Clustering to improve fault tolerance for your Exchange hardware
This presentation shows how Exchange Server 2003 can use Windows Clustering to improve fault tolerance for your Exchange hardware
Hardware Requirements Checklist for an Exchange Server 2003 Cluster
To use a cluster, you must have:To use a cluster, you must have:
Two or more nodes
Drives in each node from which operating system starts
A separate mass-storage controller for shared disk
A shared disk
Two network adapters in each node
Two or more nodes
Drives in each node from which operating system starts
A separate mass-storage controller for shared disk
A shared disk
Two network adapters in each node
Node 2
Node 1
Local Disk
Shared Disk
Local Disk
C:
C:
Disk
NetworkAdapter
Types of Exchange Server 2003 Cluster Configurations
Active/Active ConfigurationActive/Active Configuration
EVSEVSEVSEVSActive/Passive ConfigurationActive/Passive Configuration
EVSEVS
Active/passive configurations:Active/passive configurations:
Scale as well as stand-alone Exchange servers
Are more reliable
Have better failover performance
Will support clusters with up to eight nodes
Scale as well as stand-alone Exchange servers
Are more reliable
Have better failover performance
Will support clusters with up to eight nodes
Recommended Exchange Server 2003 Cluster Configuration
Active/Passive ConfigurationActive/Passive Configuration
EVSEVS
EVSEVS
EVSEVS
Considerations for Using Clusters
In active/passive clusters, Exchange Virtual Servers must equal one less than the number of nodes
Exchange 2003 is limited to four storage groups per server, which can create problems with the active/active configuration
For both cluster types, proactively monitor virtual memory performance
In active/passive clusters, Exchange Virtual Servers must equal one less than the number of nodes
Exchange 2003 is limited to four storage groups per server, which can create problems with the active/active configuration
For both cluster types, proactively monitor virtual memory performance
Resource GroupResource Group
EVSDisk ResourceSystem AttendantIP AddressNetwork Name
Preference ListNode B
Preference ListNode B
How Failover Occurs on an Active/Active Cluster vs. an Active/Passive Cluster
PublicNetwork
PrivateNetwork
Node A
Node B
EVSEVS
Client
EVSEVSWhen one of the nodes fails
Active/active configurationActive/active configuration
The surviving node takes over the failed EVS and
continues to service client computers
When the node is restored to service, the
EVS is failed back
Active/passive configurationActive/passive configuration
One or more nodes of the Exchange server cluster host active EVSs while
one or more nodes remain passive.
The cluster service checks the preference list and
moves the failed EVS to the passive node on the list. The passive node starts
servicing client computers
When the node is restored to service, the EVS is failed
back
Resource GroupResource Group
EVSDisk ResourceSystem AttendantIP AddressNetwork Name
PublicNetwork
PrivateNetwork
Node A
Node B
EVSEVS
Client
EVSEVSWhen one of the nodes fails
Active/active configurationActive/active configuration
The surviving node takes over the failed EVS and
continues to service client computers
When the node is restored to service, the
EVS is failed back
Permissions Required to Install and Configure an Exchange Virtual Server
You must To do this
Be a member of the local administrators group on each node
Install Exchange
Have Exchange Full Administrator permissions at the organizational level
Create the first Exchange Virtual Server in the organization
Have Exchange Full Administrator permissions at the administrative group level for the administrative group that contains the Exchange Virtual Server
Create additional Exchange Virtual Servers, or modify or delete an Exchange Virtual Server in an administrative group
Permissions
Demonstration: How to Install Exchange Server 2003 in a Clustered Environment
Your instructor will show a presentation that demonstrates how to install Exchange Server 2003 in a clustered environment
Your instructor will show a presentation that demonstrates how to install Exchange Server 2003 in a clustered environment
Practice: Installing Exchange Server 2003 in a Clustered Environment
Review the scenarios and determine possible solutions with a partner
Discuss your solutions with the rest of the class
Review the scenarios and determine possible solutions with a partner
Discuss your solutions with the rest of the class
11
22
Lesson: Installing and Using Exchange Management Tools and Utilities
Management Tools and Utilities for Administering Exchange
Platforms from Which You Can Administer Exchange
Permissions Required to Access Objects in Exchange System Manager
Demonstration: How to Install Exchange System Manager
How to Install and Run Windows Support Tools
How to Create a Custom MMC for Exchange Administration
Exchange System Manager
Active Directory Users and Computers
Cluster Administrator
ADSI Edit
LDP utility
Active Directory Schema snap-in
IIS snap-in
DNS snap-in
Exchange System Manager
Active Directory Users and Computers
Cluster Administrator
ADSI Edit
LDP utility
Active Directory Schema snap-in
IIS snap-in
DNS snap-in
Management Tools and Utilities for Administering Exchange
To use Windows XP:To use Windows XP:
The computer must belong to a domain in the Active Directory forest where the Exchange Servers exist
Must be running SP1 or later
The Windows Server 2003 Administration Tools Pack must be installed
The SMTP service must be installed
The computer must belong to a domain in the Active Directory forest where the Exchange Servers exist
Must be running SP1 or later
The Windows Server 2003 Administration Tools Pack must be installed
The SMTP service must be installed
Platforms from Which You Can Administer Exchange
Platforms:Platforms:Windows 2000 Server SP3
Windows 2000 Professional SP3
Windows Server 2003 family
Windows XP SP1
Windows 2000 Server SP3
Windows 2000 Professional SP3
Windows Server 2003 family
Windows XP SP1
Permissions Required to Access Objects in Exchange System Manager
Permission What you can do Delegate this role to
Exchange Full Administrator
Fully administer Exchange system information and modify permissions
Administrators who must configure and control access to your e-mail system
Exchange Administrator
Fully administer Exchange system information but not modify permissions
Users or groups responsible for the day-to-day administration of Exchange
Exchange View Only Administrator
View Exchange configuration information
Administrators who need to view organization information but not modify it
Permissions
Demonstration: How to Install Exchange System Manager
Your instructor show a presentation that will demonstrate how to install Exchange System Manager
Your instructor show a presentation that will demonstrate how to install Exchange System Manager
How to Install and Run Windows Support Tools
To install Windows Support Tools:To install Windows Support Tools:
At a command prompt, type x:\support\tools\suptools.msi
Follow the steps in the wizard
At a command prompt, type x:\support\tools\suptools.msi
Follow the steps in the wizard
11
22
To run ADSI Edit:To run ADSI Edit:
Open the Adsiedit.msc console file by using Windows Explorer or use Add/Remove Snap-in in MMC to add the ADSI Edit snap-in to any .msc file
Open the Adsiedit.msc console file by using Windows Explorer or use Add/Remove Snap-in in MMC to add the ADSI Edit snap-in to any .msc file
To run the LDP utility:To run the LDP utility:
Type Ldp.exe at the command prompt Type Ldp.exe at the command prompt
To install Active Directory Schema:To install Active Directory Schema:
Register its DLL
Add the snap-in to any .msc file
Register its DLL
Add the snap-in to any .msc file
1122
Practice
How to Create a Custom MMC for Exchange Administration
To create a custom MMC:To create a custom MMC:
Click Start, click Run, type mmc and then click OK
In the Console1 window, add the Exchange System snap-in
On the Extensions tab, select the snap-in from the Snap-ins that can be extended box
Set what extensions you want to include in the Available extensions box
Save the console and distribute it
Click Start, click Run, type mmc and then click OK
In the Console1 window, add the Exchange System snap-in
On the Extensions tab, select the snap-in from the Snap-ins that can be extended box
Set what extensions you want to include in the Available extensions box
Save the console and distribute it
11
22
33
44
55
Practice
Lesson: Upgrading from Exchange 2000 Server to Exchange Server 2003
The Differences Between Exchange 2000 Server and Exchange Server 2003
Requirements Checklist for Upgrading to Exchange Server 2003
Demonstration: How to Upgrade from Exchange 2000 Server to Exchange Server 2003
The Differences Between Exchange 2000 Server and Exchange Server 2003
ExchangeServer 2003
New in 2003:New in 2003:
Improved client access
Improved security
Improved management
New deployment and upgrade utilities
Improved ADC utilities
New pfMigrate utility
Improved client access
Improved security
Improved management
New deployment and upgrade utilities
Improved ADC utilities
New pfMigrate utility
Removed since 2000:Removed since 2000:
Support for real-time collaboration features
Support for MS Mail and Lotus cc:Mail connectors
Drive M mapping
Key Management Service
Support for real-time collaboration features
Support for MS Mail and Lotus cc:Mail connectors
Drive M mapping
Key Management Service
Requirements Checklist for Upgrading to Exchange Server 2003
Make sure that you:Make sure that you:
Are logged on with appropriate permissions
Ensure that Setup can contact a domain controller running Windows 2000 SP3 or later or Windows Server 2003 family
Upgrade all front-end servers in an administrative group first
Disable any unnecessary services after Setup completes
Upgrade all Active Directory Connectors to the version provided with Exchange Server 2003
Remove MMIS Exchange Event Sink
Remove Instant Messaging, Chat, Key Management Service, and MS Mail or Lotus cc:Mail connectors
Upgrade third-party applications to support Exchange 2003
Are logged on with appropriate permissions
Ensure that Setup can contact a domain controller running Windows 2000 SP3 or later or Windows Server 2003 family
Upgrade all front-end servers in an administrative group first
Disable any unnecessary services after Setup completes
Upgrade all Active Directory Connectors to the version provided with Exchange Server 2003
Remove MMIS Exchange Event Sink
Remove Instant Messaging, Chat, Key Management Service, and MS Mail or Lotus cc:Mail connectors
Upgrade third-party applications to support Exchange 2003
Your instructor will show a presentation that demonstrates how to upgrade from Exchange 2000 Server to Exchange Server 2003
Your instructor will show a presentation that demonstrates how to upgrade from Exchange 2000 Server to Exchange Server 2003
Demonstration: How to Upgrade from Exchange 2000 Server to Exchange Server 2003