LONGOBy Ramos&Bassols

www.actiu.com

BEST of NEOCONGOLD AWARDLounge Furniture Collections

Longo a été récompensé avec le prix Gold “The Best of NEOCON” dans la catégorie “LOUNGE Meubles Collections”. Le juré très bien composé par des architectes, des dessinateurs, des entreprises et des membres du Gouvernement des États-Unis, a attribué ce prix dû à l’excellence de ses solutions, conception du produit et production magnifi que en positionnant la série LONGO comment la meilleure du SOFT SEATING dans un marché économique très important et dans le salon le plus grand du secteur.

Modules and Configurations for Soft Seating |

www.actiu.com

LONGO

02www.actiu.com

Longo is a modular system consisting of sofas, operative and managerial desks, with storage solutions (cabinets, libraries) , accessories and sound absorbing panels which incorporate decorative accessories and items that inspire a cheerful environment.

The configuration of Longo stems from a solid extruded aluminium structure on which we attach the cast iron legs and endless possibilities to achieve the desired environment, always maintaining a unitary visual concept.

Longo enables more friendly, open and relaxed environments, where formal structures and dynamic spaces thrive to create a harmonious environment.

WHAT IS LONGO?

LONGO

03www.actiu.com

LN112

LN124 LN126 LN128

LN115LN114LN113

LN135

LN212 LN213

LN4

LN1

LN6

LN134

PC458

Longo Soft Seating Program

Modules Without divider

Modules With high divider

longo Pod - Modules With high divider and table

longo Phone booth - individual Module With high divider

132,5

132,5

132,5

132,5 132,5 132,5

66

30 332,5

66

30265

265

66

3030 199,5

199,5

199,5 199,5

199,5

66

30 30 30

66

6630

134

67

60

234

103

30

h=72

90

60

201

67

234

103

30

h=72

120

66

6630

134

67

30

103

201

67

30

103

74 6060

90

90

67

74103

30

LONGO

04www.actiu.com

LKC40LKC30LKC20LKC10

LNM02 LNM03

LN84

LNM53 LNM55

LNM63 LNM65

LN865

LN02 LN07 LN03

LN800 LN800..U

LN860

LKC52

Longo Soft Seating Program

SURFACES FOR USE IN STRUCTURE LONGO

CABINETS FOR USE ON STRUCTURE LONGO (include supporting surface)

CONNECTION MODULE FOR 2 HEIGHTS (Table - Soft Seating)

COFFEE TABLES - 32 cm HEIGHT

TYPE OF SEAT

CONTACT DESKS OPERATIVE TWIN DESKS

3ed LEVEL ACCESSORIES

Using cabinet in corner - WITHOUT DIVIDERUsing cabinet in corner - WITHOUT DIVIDER

“U” Acces Wiring

(magnets not inclunited)Magnetic board - 40x42 cmMagazine rack - 32x42 cmShelf - bottom 22cmDouble coat rack

TABLES FOR USE WITH CONNECTION MODULE FOR 2 HEIGHTS (See Longo Tables Program in Operative Desks)

Cushion Low back for use in cornerLow back Medium Back

Support monitor - 48,9 cm (For panels of 130 cm height)

Standard fixing system

3232

45 41,5

13267

7474

4444

3030

67

74

30

4343

160132 132

132

132 90

67

67 90LN01

67 6767

67 67

67 67

6714

6767

67

6747

6767

67

6747

67

6767

6776

75 mm

100 mm

LONGO

05www.actiu.com

1

2

2

4

3

5

Technical Profile

1

1. STRUCTURE

DESCRIPTION

Metal structure based on the union of its three main parts, extruded profile, square and legs. All made of aluminum. On top of the structure modular elements are mounted that make each configuration unique.

- Cushions, low seats, corner seats and middle seats manufactured from injected foam 55-60kg / m3, interior frame of perimeter steel tube of ø= 16 mm and a membrane of Ø= 4 mm, available in quality upholstery, Melange (M), Napel (N) and Blazer (B)

- Soundproofing screens. Made of board and polyurethane foam, available in quality upholstery. Melange (M) and Blazer (B)

- Individual tables and filing systems made of melamine board. Available finishes: white, lime oak and chesnut.

STRUCTURE

FINISHES

LEG h30 cm

• Structure composed of extruded aluminum profiles finished with white

epoxy paint, silver, black and black/polished. The profiles have a joint

system recorded by Actiu which enables items to be linked and creates

an infinite amount of configurations.

• Cast aluminum legs in a pyramid-shape, made of cast aluminum and

finished with epoxy paint: white, silver, black and polished.

• Joint brackets made of cast aluminum, finished in white epoxy paint in

finishes: white, silver, black and black/polished.

• Die-cast aluminum leveler with anti-slip sole.

2

3

5

4

GROUP “M“ - MELANGE

MELAMINE STRUCTURE ACCESSORIES

GROUP “B“ - BLAZER

GROUP “N“ - NAPEL

LONGO

06www.actiu.com

FEATURES

NOISE POLLUTION IN THE OFFICE

REFERENCE VALUES

CAUSES OF ACOUSTIC POLLUTION

HOW TO CONTROL NOISE SOURCES

Generally, the noise pollution levels in an office do not constitute a hearing risk for the people, however it can generate inconveniences that may affect concentration, work performance or attention span.Acoustic comfort is the sound level that does not disturb and does not cause direct damage to health. The acoustic comfort is better in offices with high level of accoustic products.

There is no mandatary accoustic legislation. Nevertheless, according to the Technical Guide from RD 488/1997, April 14, noise should not exceed 55 Db (A) when the user is doing difficult tasks.

• Basic building legislation 88 dB(A)• Professional office 40 dBA• Offices 45 dBA

• Attitude of the user. Does he accept it or not.• Physical features of noise

» Types of tones. Pure tones (those that do not vary in frequency) more annoying than the compounds. Even more when aired on audible frequencies (500 – 2000Hz)

» Frequency. More annoying high frequencies than low ones. » Randomness. The variation in noise annoyance increases.

• Non physical characteristics. The most annoying noise is the less predictable noise.

• Type of activity. Higher discomfort when more concentration is needed.

• Controlling noise within teams by: » Installing printers and faxes in remote rooms and areas » Using silent office equipment, by adding insulated housing » Lower the intensity of telephones and communication devices » Use doors with spring systems....

• Control the noise within ventilation and air conditioning• Avoid noise transmission between units using insulating the walls• Creating accoustic barriers by:

» Using accoustic materials in the walls, ceilings and floors » Using surfaces that do not reflect noise too much. (Reverberation

Time ≤ 1 seg) » Placing accoustic panels and screens between desks and

workstations » Provide office furniture that improves the acoustic behavior of

space, hollow ceilings, carpeted floor, upholstered chairs.... » Respect the local occupancy according to its volume and its use » Achieve quiet habits of conduct and communication

ORIGIN OF ACCOUSTIC POLLUTION

External noises

Working teams

Conversations and phone noises

Air conditioning and heat

Human noises

INCONVENIENCES

PHYSICAL FEATURES OF NOISE

Sound pressure level Frequency Variability

USER’S FEATURES

Attitude

NON PHYSICAL FEATURES OF NOISE

Predictability

ACTIVITY How difficult the task is

LONGO

07www.actiu.com

1

2

3

4

1.0

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

0.0

80 100 126 160 200 250 316 400 500 630 800 1000 1250 1600 2000 2500 3150 4000 5000

1

2

4

3

FEATURES

10 mm thick Chipboard

Foam thickness e= 10 mm and 60 Kg/m3 density

Fabric foam 30mm thick and 20kg/m3 density

Different fabrics available glued using water glue. - Optional accoustic or fire resistant fabrics for projects.

Actiu fabric range

GROUP “M” MELANGE Medium accoustic properties. Fire resistant fabric.

GROUP “B” BLAZER Good accoustic properties

LONGO AND LINK ACCOUSTIC SCREENS

Accoustic absorbence ratio - UNE EN ISO 354:2004

Acco

ustic

abs

orbe

nce

ratio

for s

tand

ard

inci

denc

e (-

)

Accoustic absorbence ratio for standard incidence (-)

Frequence (HZ) Ratio

80 0,07100 0,11125 0,19160 0,37200 0,37250 0,35315 0,34400 0,35500 0,41630 0,47

Frequence (HZ) Ratio

800 0,531000 0,601250 0,711600 0,782000 0,872500 0,913150 0,984000 0,995000 0,98

LONGO

08www.actiu.com

UNE-EN ISO 9001:2008EN ISO 14006:2011 UNE-EN ISO 14001:2004PEFC/04-31-0782

71,74%

100%

87,97%

100%

ACTI

U PRODUCE Y UTILIZA TABLEROSCLASE E1 STANDARD - NORMA EUROP

EA

EN 13986

E1

NORMS

Technical Profile ECODESIGN

CERTIFICATES AND REFERENCES

The different programmes get points in different environmental categories to get the LEED certificate (sustainability, material and resources, water, energy

and atmosphere, inner environment quality, innovation and design).

ALUMINIUM, STEEL & WOOD

DISPOSAL

MATERIALS

Maximum optimization of energy use. Minimal environmental impact. Last generation technological systems. Zero discharge of wastewater. No VOC coatings. Processes free of heavy metals, phosphates, OC and COD.

PRODUCTION

Quality and warranty. Long lasting. Replacements available.USE

Detachable systems. Volumes that facilitate the optimization of space. Maximum reduction of energy consumption by transport.

TRANSPORT

Maximum use of materials to eliminate and minimize scraps. Use of recyclable and recycled materials in those components that do not affect the functionality and durability.

Waste reduction. Supplier-manufacturer packaging reuse system. Components are easy to be separated. Inks in packaging are water-based, without solvents.

PACKAGE AND THINNERFREE

RECYCLED MATERIALS

RECYCLABLE

RECYCLABLE

TO CLEANAND MAINTAIN

RECYCLABLE MATERIALS

EASY

PEFC Certificate ISO 9001 CertificateECODESIGN Certificate ISO 14001 CertificateThe mark of responsable forestry

E1 Certificate by EN 13986

LONGO has passed tests done in our technical department as well as the tests done in AIDIMA the Technological Institute for furniture. The tests correspond to UNE standards and office desks:Dividers - UNE EN ISO 354:04. Acoustics.