Date post: | 28-Mar-2015 |
Category: |
Documents |
Upload: | regina-hailes |
View: | 213 times |
Download: | 1 times |
Mohamed G. Ahmed, Kyoungrok Cho, and Tae-Won Cho
College of Electrical and Computer Engineering
Chungbuk National University, Republic of Korea
Memristance and Memcapacitance Modeling of Thin Film Devices Showing Memristive Behavior
2
Outline
Introduction Periodic Table of Circuit Elements Circuit Elements with memory
Overview of different fabricated memristors Different behavior characteristics Memristor Modeling History Proposed Memristance Model Capacitance of different junctions Proposed behavioral memcapacitance model Conclusions
3
Oxygen deficien-cies
Introduction
v q
i Ф
Resistordv=R di
Capacitordq=C dv
InductordФ=L di
MemristordФ=M dq
D. B. Strukov, G. S. Snider, D. R. Stewart, and R. S. Williams, "The missing memristor found," Nature, vol. 453, pp. 80-83, 2008
4
Periodic Table of Circuit El-ements
Leon Chua, Nonlinear Circuit Foundations for Nanodevices, Part I The Four-Element Torus, Proceedings of IEEE, vol. 91, 11, Nov. 2003
5
Circuit Elements with mem-ory
Massimiliano Di Ventra et al., Circuit Elements With Memory: Memristors, Memcapacitors, and Meminductors, Proceedings of IEEE, vol. 97, 10, 2009
6
Overview of different fabricated memris-tors
Material Top Metal
Bottom Metal Ron Roff Year
AlN(Aluminum
nitride)
Cu(Copper)
Pt(Plat-inum)
~103 ~106 2010
AlO(Aluminum
Oxide)
Ti(Tita-nium)
Pt(Plat-inum)
~103 ~5x105 2011
BiFeO3 Ag Pt 102 103~107 2010
ZrO2 Cu Pt 102 108 2008
Cu:SiO2 W Cu 4*104 6x107 2007
Al2O3:RuNCs
TaN Pt 200 5x106 2011
Yb2O3 Ni TaN 102 108 2011
7
Memristive Behavior of different fabri-cated memristors
Leon Chua, Resistance switching memories are memristors, Applied Physics A, 102, 2011
8
Variations in Memristor Behavior
BehaviorVariations
StructureSpacing
Materials
9
Memristor Modeling History
D. B. Strukov, G. S. Snider, D. R. Stewart, and R. S. Williams, "The missing memristor found," Nature, vol. 453, pp. 80-83, 2008D. B. Strukov and R. S. Williams, "Exponential ionic drift: fast switching and low volatility of thin-film memristors," Applied Physics A, vol. 94, pp. 515-519, 2009
10
Memristor Modeling History (Cont.)
Kamran Eshraghian et al., Memristive Device Fundamentals and Modeling: Applications to Circuits and Systems Simulation, Proceedings of the IEEE, 2012
11
Logarithmic Behavior of memristance modeling
Paper Logarithmic behavior
Strukov et al., Applied Physics A, 94, 2009
Drift velocity – applied volt-age
Hasegawa et al., Advanced Ma-terials, 4, 2012
Channel length – junction current
Hino et al., Sci. Technol. Adv. Mater., 12, 2011
Channel length – junction currentSwitching time – applied voltage
Pickett et al., Journal of applied physics, 106, 2009
Channel length – junction current
Yang et al., Nature Nanotechnol-ogy, 3, 2008
Junction current – applied voltageChannel length – applied voltage
12
Memristance Model
[8] Feng Miao et al., Force modulation of tunnel gaps in metal oxide memristive nanoswitches, APPLIED PHYSICS LETTERS 95, 113503, 2009[16] Kamran Eshraghian et al., Memristive Device Fundamentals and Modeling: Applications to Circuits and Systems Simulation, Proceedings of the IEEE, 2012
13
Proof of memcapacitance in memristors
Xianwen Sun, Guoqiang Li, Li Chen, Zihong Shi and Weifeng Zhang, Bipolar resistance switching characteristics with opposite polarity of Au/SrTiO3/Ti memory cells, Nanoscale Research Letters 2011, 6:599
14
Proof of memcapacitance in memristors
Jie Sun, Erik Lind, Ivan Maximov, and H. Q. Xu, Memristive and Memcapacitive Characteristicsof a Au/Ti–HfO2-InP/InGaAs Diode, IEEE ELECTRON DEVICE LETTERS, VOL. 32, NO. 2, FEBRUARY 2011
15
Proof of memcapacitance in memristors
Jie Sun, Erik Lind, Ivan Maximov, and H. Q. Xu, Memristive and Memcapacitive Characteristicsof a Au/Ti–HfO2-InP/InGaAs Diode, IEEE ELECTRON DEVICE LETTERS, VOL. 32, NO. 2, FEBRUARY 2011
16
Behavioral Model of Memcapacitance
ε permittivity of the sandwiched materialA device cross section areaAf the effective area of the filamentsdmax the gap length without filamentsdf the gap thickness between filaments and the next electrode
X(t)
Xmax
Xmin
17
Proposed memristor model
18
Conclusions
Developing new memristance model is not only simple as behavior models, but it also considered to be physical model using some fitting parameters.
Forcing memristance model to work within boundary conditions by choosing new window function which also satisfies logarithmic fashion of drift velocity with junction current.
Including behavioral modeling of junction memcapacitance to model real memris-tor device.
Thank you