MOHAMMED O. ALSHAMRANI FACTORY FOR …shamranifact.com/shamrani.pdfINTRODUCTION MISSION & VISION OUR...

P. O. Box 6577, Dammam 32447, Saudi Arabia.

Tel.: +966 13 8226550 / 8187940 / Mobile: 0592222757

Email: [email protected], Website: www.shamranifact.com

Dammam, Dallah Industrial, Abu Hadriyah Highway Road

Factory Tel. : +966 13 8226550 / 8187940

Fax. : +966 13 8202438

TOYOTASHOW-ROOM

VEHICLES PERIODICINSPECTION CENTRE

HALF MOONBEACH

AZIZIA BAHRAIN KUWAIT ABU HADRIYA HIGHWAY

DALLAH

JUBAIL ROAD

ARAMCO

DH

AH

RAN

ABQ

AIQ

RO

AD

NEW

AIR

PORT

DA

MM

AM

DA

MM

AM

IBN

KH

ALD

OO

N R

OA

D

DA

MM

AM

TO

WN

DRIVING SCHOOL

MOHAMMAD O. ALSHAMRANIFACTORY FOR METAL INDUSTRIES

MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES

COMPANY PROFILE

We provide the best solutions for Steel products


INTRODUCTION

MISSION & VISION

OUR PRODUCTS

LIST OF MANPOWER

GALLERY

SAFETY PROGRAM

CERTIFICATES

INDEX


INTRODUCTION

We are glad to introduce ourselves as one of the leading manufactures in the field of advanced heavy

industries .That is due to the long and wide experience in the manufacturing of heavy equipments

and structure like Flat bed Trailer, Low bed Trailer, Genset Trailer, Dumpers, Tankers, Cement Bulkers

& Mixing drums, Storage Tanks, Car Carriers, Cool & Dry Boxes, Insulated Boxes, Portable Houses,

Hangers, Storage Racks etc. and all kind of steel structural works not only in Kingdom of Saudi

Arabia but also the Arabian Gulf areas . More over we have special experiences in the supporting

service for the oil field companies like Schlumberger group of companies, Arabian Drilling Co. etc .

We are also providing our facilities for supporting services like rolling of sheet, dishing cutting &

bending of sheets etc . for our valued customers. We are always careful to exert more efforts to devel-

op better quality, quick performance and fast delivery as well as uncompetitive reasonable prices.

We wish to make very good business relationship with your concern.

The Al Shamrani Factory has a full range of armored trucks that includes Bullet proof Automobiles,

Trucks, and Vehicles Cash in Transit Armored Vans Swat / Police Tractical Armored Vehicles

If you honor us with any of your requirement , we will supply that with very much pleasure to your

satisfaction.

We assure our best service and prompt execution always .


MISSION & VISION

Mission

To deliver exceptional value of our clients, to provide

them with more than just an on time, cost efficient steel

products structural designing and engineering products,

but also provide them with performance while maintain-

ing the highest level of compliance with the international

standard of quality and safety.

Vision

To be recognized as the premier company in the field

of engineering and structural fabrication driven by

excellence and thrive on client satisfaction.


VACUUM TANK 32,000 LITER SPECIFICATION

Overall dimensions (LxWxH) (mm) 11000x2500x4400

Tank capacity (ltrs) 32,000

Tank body 6 mm

Vacuum pump MORO M9 pump or Equivalent

Engine DEUTZ STANDARD ENGINE MODEL : F3L912

Suspension system Leaf spring or airbag suspension

Axle Various axles like BPW,YORK and AAMC with various bearings

Tire Various brands of bias tire or radial

King pin Forged steel,2” or 3.5” welded or bolt-in

Landing gear 24T ,25T

Main beam High tensile steel

Surface preparation Shot blast

Tank interior Sand blast

Accessories Rear ladder Two manhole Walkway Mudguard Rear bumper Toolbox Water Tank (Plastic)

Tank interior Sand Blasted SA 2,5 and painted with two coats of primer and 2 cots of finished paint Single color as per customer ‘s choice.


CEMENT BULKER 30 TON SPECIFICATION

Overall dimensions(LxWxHx)(mm) 10000x2650x4000

Main body 5 mm

Capacity (m3) 30 Ton



Tire Various brands of bias tire or radial tires




Surface preparation Shot blast

Electrical system Standard electrical equipment

Accessories Rear ladder Two manhole Walkway Mudguard Rear bumper Toolbox Water Tank (Plastic)


WATER TANK 32,000 LITER SPECIFICATION

Overall dimensions (LxWxH) (mm) 12000x2500x3500

Tank capacity (ltrs) 32000

Tare weight (Kg) 9000







Surface Preparation Shot blast


Accessories Rear Loading ladder Inspection manhole Walkway Mudguard Rear bumper Toolbox Water Tank (Plastic)


DUMP TRUCK SEMI TRAILER 22cbm SPECIFICATION


Tare weight (m3) 22 cbm

Lifting Hydraulic piston HYVA brand or Binotto telebrand

Side wall thickness 6 mm

Floor thickness 8 mm






Main beam High tensile steel (IPE 400)



Accessories Rear ladder Walkway Mudguard Rear bumper ToolboxWater Tank (Plastic)


HIGH BED TRAILER 30 TON SPECIFICATION


Tare weight (ton) 30 ton

Loading deck thickness 4 mm (chequered plate)









Accessories Rear ladderMudguardRear bumperSpare tire holderToolboxWater Tank (Plastic)

MOHAMMED O.ALSHAMRANI FACTORY FOR METAL INDUSTRIES

LOW BED 70 TON SPCIFICATION


Tare weight (ton) 70 ton

Loading deck thickness 6 mm









Accessories Mudguard Rear bumper Spare tire holder ToolboxWater Tank (Plastic)


IFUEL TANK SEMI – TRAILER SPECIFICATION


Laden height (mm) 3000

Tare weight (Kg) 9000









Accessories Rear loading ladderInspection ManholeWalkwayMudguardRear BumperToolboxWater Tank (Plastic)


PIPE DOLLY 40 T0N SPECIFICATION


Tare weight (Ton) 40 Ton






Main Tube High tensile steel



Accessories Rear ladder Inspection manhole Walkway Toolbox Mudguard Rear Bumper Water Tank (Plastic)


MUD TANK 22.000 LITER SPECIFICATION


Tank capacity 22,000

Main body thikness 6 mm









Accessories Rear LadderTwo manholeWalkwayMudguardRear bumperToolboxWater Tank (Plastic)


LIST OF MANPOWER

QA/QC Manager

Civil Engineers

Mechanical Engineers

Safety Engineers

Supervisors / Foremen

Technicians

Secretaries

Draftmen

Heavy and Light Drivers

Welders

Labors

Fabricators

Mechanical Helper

Electricians

Rigger & Erecter

Instrument Technicians

Instrument Fitters

Spray Painter

Insulators

Steel Fixers

Safety Officers

03

02

02

01

10

13

09

03

35

30

50

21

05

10

05

07

07

05

05

06

02


GALLERY


Container Trailer Portable House

Portable House Portable House

GALLERY


Hangar Building Hangar Building

Hangar BuildingHangar Building

GALLERY


Dump Truck

Cement Bulker Fuel Tank Semi-trailer

Low Bed Trailers

GALLERY


Cash Transit Vehicles

Garbage Truck. Water Tank

Cash Transit Vehicles

SAFETY PROGRAM

Health and safety management system

Environmental policy

Introduction

Safety Induction

Employee Responsibilities

Manager Responsibilities

HSE Coordinator

Safety Representative

Employees Practices in Yards or Suppliers Premises

Drug Abuse Policy

Smoking

Maximum Working Hours

Personnel Protective Equipment’s


Al Shamrani Factory is fully committed to meeting its responsibilities to the

requirements of clients and local legislative requirements both as an employer

and as a company. To achieve these objectives it has appointed a designated

member of staff to be responsible for occupational health and safety, to keep

workplace health and safety authorities wherever necessary, and keep the com-

pany and board of directors abreast of new legislation, regulation to ensure

ongoing compliance with the law.

The main responsibility for health and safety lies with the chief executive officer.

The company is bound by any acts and or omissions of the chief executive

officer, any manager, giving rise to legal liability, provided only that such acts and

or omissions arise out of in the course of company business.

To comply with its statutory and common law duties, Mohammed Fahd Al-Ajmy

Cont. Est. has arranged insurance against liability for death, injury and or disease

suffered by any of its employees arising out of and in the course of employment,

SAFETY PROGRAM


SAFETY PROGRAM

Al Shamrani Factory employees agree as part of their contract of employment, to

comply with their individual duties under local legislative requirement and will

cooperate with employer to enable him to carry out his health and safety duties.

Failure to comply with health and safety duties, regulation, work rules and proce-

dures regarding health and safety, on the part of any employee may lead to

dismissal, in case of serious breaches or repeated breaches, such dismissal may

be instant and without prior warning.

Al Shamrani Factory has instituted a system of reporting accidents, diseases and

dangerous occurrences.


SAFETY PROGRAM

Al Shamrani Factory will comply with its duties towards employees under local

legislative requirements so far as is reasonably practicable in order to:

Provide and maintain plant and systems of work that are safe and without risks

to heath, a safe place of work and a safe system of work.

Ensure the safety and absence of risks to health in connection with the use,

handling, storage and transport of articles and substances.

Provide such information, instruction, training and supervision as may be neces-

sary to ensure the health and safety at work of its employees.

Make regular risk assessments available to employees and take appropriate

preventative / protective measures. Provide employees with health surveillance

where necessary.

Appoint competent personnel to secure compliance with statutory duties and

to undertake reviews of the policy as necessary.


SAFETY PROGRAM

Al Shamrani Factory will comply with its duties towards employees under local

legislative requirements so far as is reasonably practicable in order to:

Provide and maintain plant and systems of work that are safe and without

risks to heath, a safe place of work and a safe system of work.

Ensure the safety and absence of risks to health in connection with the use,

handling, storage and transport of articles and substances.

Provide such information, instruction, training and supervision as may be

necessary to ensure the health and safety at work of its employees.

Make regular risk assessments available to employees and take appropriate

preventative / protective measures. Provide employees with health surveil-

lance where necessary.

Appoint competent personnel to secure compliance with statutory duties

and to undertake reviews of the policy as necessary.


SAFETY PROGRAM

We shall comply fully with and keep abreast of all legal obligations connect-

ed with our operations past, present and future.

We will ensure that new projects are managed in a way which minimizes

their impact on the environment.

We shall make efficient and environmentally responsible use energy and

water

Environmental policy

Al Shamrani Factory comprises inspection and projects division. Within these

divisions we provide a comprehensive service of inspection, auditing, expedit-

ing, procurement, provision of personnel, training to clients of international

standing throughout kingdom of Saudi Arabia.

We are determined to ensure that environmental benefits strengthen the

spectrum of our operation. Specifically we will do this by the application of

environmental management within the framework of the company and

through the efficient operation of Al Shamrani Factory by providing resources

and expertise to make this a practical reality.

In order to achieve this aim Al Shamrani Factory has the following key objective.


SAFETY PROGRAM

These commitments will be demonstrated through the introduction of policies

and practices.

Their effectiveness will be monitored by evaluating the company’s environmen-

tal performance the results of which will communicate to employees and the

community.

This policy statement will be subjected to annual review and is made available

to all employees and other interested parties.

Promote environmentally responsible procurement of goods and service.

Minimize waste production as far as is practicable, to reuse or recycle waste

where appropriate.

To minimize the impact of transport on the environment arising from its

own vehicles

To maintain its building and grounds in an environmentally sensitive way.

To raise awareness amongst our employee on the company’s environmen-

tal activities and performance.


SAFETY PROGRAM

Introduction

This document provides an overview how Al Shamrani Factory expects employ-

ee to work safely.

Identifies the issues which concern our employees for health and safety.

Identifies the responsibilities of our organization.

Safety Induction

All personnel working for Al Shamrani Factory will be given their own copy of

this safety manual when they join our company. We recognize that you will have

the necessary qualification, competence and experience to carry out the role

you a tasked with however Al Shamrani Factory will also provide you with specif-

ic instructions and guidance relating to your new worksite or office.

Direct manager is responsible for conducting a “Safety Induction “as soon as

practicable.

NB: The safety induction shall include the following as appropriate to your work-

site however where this involves an assignment to a supplier’s work or a custom-

er / client facility then their safety induction process will take precedence.


SAFETY PROGRAM

Organization at the workplace.

Emergency response plan and its location.

Emergency alarms

Work areas including fire muster, welfare and first aid.

Firefighting equipment and alarm points.

Safety signs and their meaning.

Safety representative.

Safety notice board.

Smoking policy and smoking /no smoking areas.

Location general information including traffic information.

Safety documentation relevant to the work task.

Hazard identification and supplier risk assessment checklists.

Safe systems of work.

Handing of dangerous substances.

Protective clothing and what you must use in your job.

Reporting safety observations.

Incidents, accidents and injuries.


Reports all unsafe events or equipment however minor and bring it to the

attention of your manager.

Beware of safety issues even after work has finished.

Take an active part in the promotion of working safely.

Do not take short cuts or become complacent in your work tasks with

regard to safety.

Think about the hazards to yourself and others before you begin a work task

and take the necessary precautions.

Make sure that you carry out your work activities in accordance with

procedures and policies approved by Al Shamrani Factory or in the case of

an assignment then this will be in accordance with the supplier, customers

/ clients safety management system which will be explained to you on arriv-

al at their workplace..

SAFETY PROGRAM

Employee Responsibilities

Al Shamrani Factory employees have a responsibility to ensure the safety and

welfare of themselves and their co-worker as well as preventing damage to

equipment or the environment.

These responsibilities include minimum as the following:-


SAFETY PROGRAM

NB: If unsafe acts / conditions are observed, it is your responsibility to report

those hazards immediately to that supplier or client’s management.

Immediately after you must then contact Al Shamrani Factory Management

reporting the same unsafe acts / conditions observed, Al Shamrani Factory Man-

agement following analysis and assessment will inform you of your next course

of action.

This may consist of the following if not already in place.

1. Request that you remove yourself immediately from the area to a safe distance

from the unsafe acts / conditions.

2. Make specific recommendations. e.g. stopping your work, safe distance, addi-

tionalPPE requirements.

3. Requesting that you complete a risk assessment checklist to formally identify

those unsafe acts / conditions.


SAFETY PROGRAM

Manager Responsibilities

Managers have overall responsibility and accept that they will be held accounta-

ble for the safety of employees.

Their responsibilities include such safety activities as conducting and participat-

ing in risk assessments, providing safe operational procedures, providing safe

equipment where appropriate, conducting safety induction / familiarization

training.

HSE Coordinator

Al Shamrani Factory has a HSE Coordinator who has the responsibility to ensure

the implementation of the safety and Environmental policies.

Provide additional safety consultants as required to provide additional

support and expertise.

Provide independent audits.

Coordinate risk assessments.

Coordinate accident incident reporting and statistics.

Assist with investigations.

Act as a focal point on all HSE issues including first aid.


SAFETY PROGRAM

Safety Representative

Al Shamrani Factory encourages the active participation of all employees in

promoting safe working practices throughout all our operations.

Al Shamrani Factory believe that its operations and competent employees all

contribute towards providing a safe place of work and as such Al Shamrani

Factory provides regular forums to enable our employees to discuss issues of

concern and make proposals to improve safety performance.

Safety representatives are usually identified to all employees during their induc-

tion and on the safety notice board or similar.


SAFETY PROGRAM

Employees Practices in Yards or Suppliers Premises

In addition to any specific instruction communicated during a safety induction

or as directed by safety representative, all Al Shamrani Factory employees shall

observe the following:-

Do not consider entering any designated danger areas unless this is essential

for the performance of the work and most importantly it is safe to do so.

Do not consider entering any designated danger areas unless authorization

has been obtained from a responsible representative of the works / site.

In pipe mills and other factories keep to the marked out or railed walkways.

Do not pass within barriers surrounding presses or similar machines.

Take care when materials are being offloaded or stacked.

Do not pass between pipe stacks.

Keep hands and feet from between pipe and other stacked materials.

Observe speed restrictions when driving in plants or work sites.

Watch out for overhead loads and obey signals from banksman / operators.

Wear personal protective equipment (PPE) e.g. protective helmet, safety

boots / shoes, coveralls, safety glasses / goggles, gloves ear protectors

selected in accordance with the type of hazards involved.


Never approach grinding, welding or other obvious hot work operations

without the appropriate approval and personal protective equipment (PPE).

When radiography is being carried out observe all safety signs, barriers,

audible alarms and verbal instruction.

Ensure that all scaffolding and ladders are tagged and safe to use before you

climb onto them and correct working at height procedures are followed.

Do not enter any confined spaces unless a permit to work system is in place

and a risk assessment has been carried out.

Do not work at height above 6.5 meters unless the ladder is caged, a safety

rail is present or a safety line is used in conjunction with a harness.

Take extreme care when in the presence of high pressure liquids and gasses

/ hydro tests / gas leak test obey all barriers and safe systems of work.

Do not approach or use any dangerous substances without first ensuring

that the substances have been assessed by a responsible person and that all

precautions have been identified.

SAFETY PROGRAM

When on site always ensure that you know the escape routes, first aid points and

emergency contacts and also ensure that you seek out advice on:

Permit to work systems

Lifting operations

Manual Handling

Dangerous Substances

Working at Heights

Personal Protective Equipment (PPE)

Confined Spaces


SAFETY PROGRAM

Drug Abuse Policy

Al Shamrani Factory prohibits the possession of, or drinking of alcohol at all

times. The possession or use of illegal non-prescribed drugs is prohibited at all

times. Breach of this policy is a disciplinary offence, which may lead to employee

dismissal.

Smoking

Al Shamrani Factory operates a policy of having designated smoking areas

where smoking may be permitted these areas are in place to minimize the risk

from passive smoking and also to prevent the risk from accidental fires.

Employees who smoke must also request the location of similar designated

smoking areas when visiting suppliers / clients sites or offices, in many cases the

carrying of lighters or matches is prohibitive.

Always comply with “No Smoking” signs.


SAFETY PROGRAM

Mobile Phones Use Whilst Driving

Whilst driving you should not use a hand-held phone as you are not in full

control of the vehicle, the phone should be switched off at all times whilst you

are driving.

It is not recommended that hand-free phones are used as these can also cause a

distraction as you will not be concentrating fully on the road / traffic conditions.

For the safety of other road users and yourself please use voicemail whilst driving

and retrieve your messages at the end of the journey.

Maximum Working Hours

As part of our health and safety system, envisaged working more than a twelve

hour day require approval from either the Al Shamrani Factory or clients direct.


SAFETY PROGRAM

Personnel Protective Equipment’s

Clothing

Al Shamrani Factory employees regularly working on assignments in the plant

work areas shall wear long sleeve shirts & paints.

For specific exposures that may pose unusual hazards, special types of protective

clothing shall be provided. Examples of this are leather aprons for welding and

chemical resistant jackets or coveralls for acids and caustics.

Safety footwear

Al Shamrani Factory employees working in plant work areas shall wear safety

footwear (i.e. safety shoes or boots).

The safety footwear shall meet the ANSI Z41 safety standard. Dielectric boots are

mandatory in the cell line / membrane areas.

Al Shamrani Factory employees shall be issued one pair of safety footwear initial-

ly and will be issued one pair each year. Worn out footwear can be replaced with

approval of employees supervisor.

Non-slip soles shoes shall be worn for working on slick surfaces, such as the top

of tanks, etc.


SAFETY PROGRAM

Eye protection

Al Shamrani Factory employees entering the plant work areas shall wear

approved eye protection (e.g chemical goggles or safety glasses). Chemical gog-

gles shall be carried on each person entering plant work areas and used for

added eye protection and entry into goggle areas.

Al Shamrani Factory shall furnish one pair of prescription safety glasses including

an industrial safety frame to employees at company expense.

Spectacles with side shields that meet ANSI Z.87.1-1989 specification (or

equivalent) shall be mandatory for personnel exposed to flying particles and

foreign bodies.

The tinted safety glasses shall not be permitted to be worn at night, or indoors.

All employees shall wear eye and face protection in all areas where personnel are

exposed to flying particles, glare, liquids / chemicals, injurious radiation, or a

combination of these hazards.


SAFETY PROGRAM

Safety Hard Hats

Al Shamrani Factory employees entering the plant work areas shall wear safety

hard hats except inside office buildings control rooms and the security main

gate. Under certain conditions (e.g. overhead hazards), wearing your safety hard

hats in buildings may be required.

Hard hats for protection from impact and penetration by falling or flying objects,

electric shock and burns shall meet the specification of ANSI Z89.1-1997. Appro-

priate class of helmets as given in ANSI Z89.1-1997 shall be used for the electrical

voltage being handled.

Employees shall wear head protection (hard hats) in all areas where there is a

possible danger of head injury from impact by falling or flying objects, or

electrical shock and burns.

Users should visually inspect hardhats for components (shells, suspension, head-

bands, sweatbands, etc.) prior to use. Any hard hats with dents, cracks, penetra-

tions or other damage due to impact, rough treatment, or wear that might

reduce the degree of safety originally provided shall be discarded from service.


SAFETY PROGRAM

Safety hardhat headband and suspension system shall be adjusted so that the

hat is firmly on the head and that there is no interference with the suspension

system.

Liners designed to be worn with hardhat are available for issue from the ware-

house. Other lining material may interfere with the proper functioning of the

headband and suspension system and shall not be used.

To help secure your safety hard hats while working at height, confined spaces, or

high wind the use of a strap or tightening down on the suspension ratchet is

recommended.

Hearing Protection

All areas / activities where the noise level is 90 DBA or greater shall be estab-

lished and clearly identified. All such areas / activities shall be designated for

mandatory wearing of hearing protection. Work operations with noise level

equivalent to 90 DBA or greater shall be posted as hearing protection designat-

ed areas.

Hearing protection shall be selected to reduce the noise level upto 90 DBA.


SAFETY PROGRAM

Hand & Finger Protection

Gloves shall be used for hands and fingers protection. The glove type shall be

selected depending on the work environment and the material handling.

Cotton gloves shall provide protection against dirt and chafing.

Natural rubber gloves, neoprene synthetic rubber gloves and vinyl gloves shall

be worn by personnel forprotection against various chemicals.

Leather gloves with gauntlets shall be worn by welders and for protection

against moderate heat, ultraviolet, infrared rays and sharp or rough objects.

Barrier cream can be used as hand and fingers protection “(e.g. water repellent

barrier creams and solvent repellent barrier creams). They are not a substitute for

gloves and shall only be used when there is occasional and minor contact with

a solvent or around rotating machinery where gloves cannot be worn because

of the hazards. IS&S Industrial hygienist shall be contacted for more information.


SAFETY PROGRAM

Rubber gloves, which meet the ASTM 1991 standard specification for leather

protectors for rubber insulating gloves and mittens, shall be worn by electricians

working on live or energized electrical circuits. They shall be worn under a pair of

leather gloves.

Inhalation / Respiratory Protection

Canister and Cartridge masks

Masks and its Canister / Cartridge shall meet the National Institute for Occupa-

tional Safety and Health (NIOSH) standard, for the hazardous gas that is to be

handled.

Appropriate Canister / Cartridge shall be connected to gas mask. Consideration

shall be given to the concentration and type of hazardous / toxic gas that has to

be handled when selecting the canister / cartridge.

A system shall be in place to verify the validity of the canister / cartridge. All

expired canister/cartridges shall be taken out of service and disposed off.

Canister / cartridge masks shall not be used in atmosphere containing less than

19.5% oxygen.


SAFETY PROGRAM

Canister / cartridge mask shall not be used in areas wher he concentration of

hazardous gas is in excess to the maximum permitted limit of the canister /

cartridge that is connected to the mask.

Dust Mask

Dust masks shall not be used in atmosphere containing toxic / hazardous gas

above its Threshold Limit Value (TLV).

Dust mask shall provide adequate protection against greater than 0.3 micron

size particles and dry oil or non-oil based aerosols.

Dust masks shall meet NIOSH standard 42 CFR Part 84.

High Elevation Protection.

Safety harnesses / Lifelines.

Use of safety belt shall not be permitted.

Safety harnesses / Lifelines shall meet the NFPA 1983 fire service Life harness and

hardware standard and OSHA 29 CFR 1926.500, subpart M.


SAFETY PROGRAM

The user shall inspect safety harnesses / lifelines for obvious defects or evidence

of mistreatment, prior to use. Safety harnesses and lanyards that received an

impact load shall be immediately removed from service until subjected to the

above NFPA standard inspection.

Lifeline (minimum 19 mm rope) shall be supported independently of the

scaffold, carriage, or platform from which the work is being done. The lifeline

shall be tied off as short as the necessary movement of the worker will permit, in

order to limit the length of any possible free fall. An anchor point shall be capa-

ble of supporting the potential impact load of a worker’s fall.

Safety harness with lanyard, meeting the NFPA fire service life harness and hard-

ware standard, shall be used by personnel anytime it is necessary to perform

work from an elevated area above 2 meters which does not have a guard rail,

safety net, or any other items to prevent falling.

Safety harnesses / lifelines that come in contact with chemicals during use shall

be cleaned immediately and report to supervision.

Safety harness and buckles shall be fastened securely.


CERTIFICATES


CERTIFICATES


CERTIFICATES


Date post:	19-Mar-2020
Category:	Documents
Upload:	others
View:	2 times
Download:	0 times

MOHAMMED O. ALSHAMRANI FACTORY FOR …shamranifact.com/shamrani.pdfINTRODUCTION MISSION & VISION OUR...

Documents