The Inventors of Hardened Plastic Teeth
Anterior & Posterior Hardened Plastic Teeth
Mold Chart
DYMON-HUE HPT®
15 shades • heat and wear resistant • american made • vacuum processed fluorescent • extra large molds • excellent bond strength
35 anteriors • 40 posteriors • striking bleached shades
Since 1864
Health CanadaCompany ID:
113382
CALIFORNIADEVICE
MANUFACTURING LICENSE
License Number: 63593Proudly made in the USA
The cross-linking system employed is an interpenetrated multilayered, intersectional polymer network. 100% bondability with methyl methacrylate denture base material.
Justi® Hardened Plastic Teeth comply with ANSI/ADA Specification #15 Published in 2008, Identical adoption of ISO Standard #22112:2005
©2015 by American Tooth Industries. All rights reserved. No part of this mold chart may be reproduced without written permission from American Tooth Industries.
1200 Stellar Drive, Oxnard, CA 93033-2404(805) 487-9868 • FAX (805) 483-8482
E-mail: [email protected] • Website: www.americantooth.com
1512 Set Capacity Cabinet
GROUP/ITEM #084-19980 Contains: one set of each mold, in your shade of choice, 35 anteriors and 40 posteriors.
The kits offer a customized assortment of either anterior or posterior teeth, in your choice of 15 shades, and American style molds ranging from small to extra large. A must for any dental practice and laboratory.
Available in upper and lower anteriors or posteriors in your choice of molds and shades . A valuable tool for any dental office or laboratory.
1512 set capacity/27 drawers and inserts, 19”x19”x33 1/2” *Please allow an additional two inches when casters are installed.
210 set capacity/10 drawers, 9 ½”x12 7/16”x11x5/16”Includes Universal Inserts
GROUP/ITEM # DESCRIPTION
084-19981 Anterior Repair Kit 108 teeth (18-1x6 cards) Uppers and Lowers 084-19982 Posterior Repair Kit 128 teeth (16-1x8 cards) Uppers and Lowers (Each set is boxed individually)
GROUP/ITEM # DESCRIPTION086-55-0101 Lab Tooth Cabinet
GROUP/ITEM # DESCRIPTION086-55-0201 1512 Set Capacity Cabinet
Justi® Dymon-Hue® HPT Repair Kit
Empty Lab Cabinet
Dymon-Hue® HPT Working Mold Guide
Also Available:• Shade Guide• Laboratory Customization• Patient Education Brochures• Rx Pads• Denture Bags• Warranty Cards• Justi Laboratory Complete
Denture Tooth Manual
Tooth CabinetsTooth Cabinets
Universal Tray Inserts Available to fit most tooth lines. Please call for more information.
MC
107
04
1615
This shade comparison chart is to be used in selecting approximate color matches. Variations occur due to the difference in the texture and character of the respective materials. This chart should be used as an aid to the skill and preferences of the dental professional who must make the final shade choice.
DYMON-HUE HPT®
SHADE COMPARISON CHART
Now AvailableNow Available
DYMON-HUE HPT®
ARTICULATION CHART
UPPER LOWER 33° 33° SHORT-BITE 20° 10° 0°
1N 3N 30M 30S 29M 30F 29MF
2C 2C 30M 30S 29L 32F 29MF
2D 2D 30M 30S 29L 30F 29MF
2E 2E 30M 30S 31M 30F 31MF
2N 2N 30M 30S 31L 33F 31MF
2P 2P 30M 30S 29M 30F 29MF
3C 3C 30M 30S 29M 30F 29MF
3D 3C 30M 30S 31M 33F 31MF
3M 3M 30M 30S 31M 32F 31MF
3N 3N 34M 34S 33M 33F 33MF
3P 3P 30M 30S 31M 32F 31MF
4H 4H 32M 32S 31L 32F 33MF
5P 3N 30M 30S 31M 33F 31MF
A25 46 32M 32S 31M 33F 31MF
A26 47 30M 30S 31M 33F 31MF
136 47 34M 34S 33M 33F 33MF
137 4H 34M 34S 33M 33F 33MF
264 2P 30M 30S 31L 33F 31MF
266 26 34L 34S 33M 33F 33MF
267 3R 34L 34S 33M 33F 33MF
268 3R 34L 34S 33L 34F 33MF
ANTERIOR POSTERIOR
Color Dymon-Hue® Vita® Bioform®
Bleached H21 OM1 -
Bleached H22 OM3 -
White/Gray H59 - 52
Yel/Brn H60 A3 64
White H61 C1 -
White/Gray H62 A1 52
Gray/Pink H65 A3-5 55
Yel/Pink H66 B2 66
Yel/Brn H67 B3 83
Yel/Brn H68 B4 77
Gray H69 D4 69
Brown H77 B4 83
Gray/Brn H78 A4 84
Gray/Brn H81 A4 81
Brown H87 A4 85
Striking Bleached Shades H21 & H22Striking Bleached Shades H21 & H22
Dymon-Hue® HPT, Justi®, PlanatomicalTM
, SymmetryTM
, are trademarks of American Tooth Industries. Vita®, and Bioform® are not trademarks of American Tooth Industries.
3D
9.6 8.0
48.5 43.36
Profile leftCentral Incisor
3P
10.8 8.8
52.5 47.20
2C
9.2 7.4
46.5 40.80
5P
10.5 8.2
48.5 43.30
2P
11.0 8.4
51.0 45.68
2N
9.8 7.7
46.5 40.96
3N
10.9 8.0
48.5 43.14
2E
10.4 8.4
49.5 45.08
A25
9.3 8.6
49.5 44.80
Profile leftCentral Incisor
A26
10.0 8.0
52.0 45.64
3C
8.8 7.8
48.5 42.50
266
12.2 9.5
55.0 49.83
267
12.6 9.5
57.0 51.70
264
10.8 8.3
49.5 44.90
2D
9.3 7.5
46.5 41.14
4H
10.3 8.9
52.5 47.30
136
10.7 9.2
54.5 49.15
137
11.0 9.4
57.0 51.27
LEGEND:A - Width of 6 upper anteriors on curve.B - Width of 6 lower anteriors on flat.C - Length of central anterior.D - Width of central anterior.
NOTE: Tooth measure-ments are within plus or minus 3% of the stated value.
10.0 8.0
52.0 45.64MoldClassification
Symbol
MoldNumber
Total Widthon Curve (A)
Total Widthon Flat (B)
WidthCentral (D)
LengthCentral (C)
HOW TO READ DYMON-HUE HPT MOLD CHART CLASSIFICATION SYMBOLS & LEGENDSquare Tapering Ovoid A combined symbol ( ) means: tapering ovoid type.
A26A
B C
D
268
13.3 10.2
59.2 53.2
DYMON-HUE HPT®
UPPER ANTERIORS
1N
9.8 8.2
48.0 42.95
3M
8.9 7.2
43.0 38.38
DYMON-HUE HPT®
LOWER ANTERIORS
47
9.1 5.8
41.5 38.11
2C
8.0 4.3
33.5 30.72
Profile leftCentral Incisor
Profile leftCentral Incisor
3C
8.2 5.5
37.5 34.44
2P
10.0 5.2
38.5 34.61
26
11.7 5.8
39.5 37.40
2D
9.0 5.0
34.0 31.65
4H
10.0 5.9
39.0 36.75
3R
11.6 5.7
42.5 39.40
46
8.7 5.6
39.0 36.16
2N
8.7 5.0
35.0 32.60
3P
9.8 5.8
40.0 37.00
2E
9.7 5.1
37.5 33.70
Profile of leftPremolar
Width U/LLeft 1st Molar
33o ANATOMICAL POSTERIORS 33o SHORT-BITE POSTERIORSProfile of left
PremolarWidth U/L
Left 1st Molar
30M
29.9
32.2
9.17
9.72
30S
29.9
32.2
8.36
8.77
32M
31.5
34.1
9.57
9.74
32S
31.5
34.1
8.19
8.98
34L
33.8
36.0
10.0
10.22
TotalWidthUpper (E)
TotalWidthLower
(F)
MoldNumber
Width Left 1st Upper Molar (G)
Width Left 1st Lower Molar (H)
LEGEND: E - Straight line measurement of 4 upper posteriors. F - Straight line measurement of 4 lower posteriors. G - Width of left 1st molar upper. H - Width of left 1st molar lower.
POSTERIORS
32.229.9
8.36
8.77
30S
Profile of leftPremolar
Width U/LLeft 1st Molar
9.03
9.22
34M
33.8
36.8
9.81
10.4
34S
33.8
36.8
3N
9.8 5.2
36.5 33.78
3M
8.5 4.6
33.5 30.24
DYMON-HUE HPT®
Width U/LLeft 1st Molar
10o SYMMETRYTM POSTERIORS 0o PLANATOMICALTM POSTERIORS Profile of leftPremolar
Width U/LLeft 1st Molar
Profile of leftPremolar
29MF
28.5
30.5
6.82
8.18
30F
30.0
33.0
8.22
8.99
31MF
30.0
32.8
6.72
7.95
32F
31.0
33.5
9.11
9.47
33MF
32.2
34.0
7.59
8.27
33F
32.0
34.0
9.30
9.77
34F
33.0
36.5
9.24
10.25
LEGEND: E - Straight line measurement of 4 upper posteriors. F - Straight line measurement of 4 lower posteriors.
E
F
20° SEMI ANATOMICAL POSTERIORS 20° SEMI ANATOMICAL POSTERIORS Profile of leftPremolar
Profile of leftPremolar
29M
29.1
31.5
7.35
8.65
29L
29.1
31.5
7.91
8.52
31M
31.1
33.5
8.00
9.04
31L
31.1
33.5
8.58
8.97
33M
33.1
35.5
8.75
9.50
33L
33.1
35.5
9.05
9.82
Width U/LLeft 1st Molar
Width U/LLeft 1st Molar
Dymon-Hue HPT’s reproduction of the correct physiological features of the labial curvature provides natural aesthetics, enables proper tooth positioning, and the re-establishment of the balance between lips, tongue, and teeth.
The Dymon-Hue Planatomical™ 0º Posterior offers a non-interfering occlusal surface ideal for flat plane occlusion or bilateral balanced occlusion. It provides complete freedom in lat-eral excursions. When seen in the mouth, these posteriors appear like naturally worn dentition.
The Dymon-Hue Anatomical 33º and 20º pos-teriors are designed to meet the requirements of the great majority of patients. Scientifically designed occlusal cusp inclines enhance chew-ing efficiency and help to prevent cheek and tongue biting.
The Dymon-Hue Short-Bite Posterior is ideal for most partial framework cases where the vertical space is limited. The scooped out ridge lap area eliminates bulk and reduces grinding time. The long buccal surface pro-vides excellent aesthetics.
20º 33º
Conventional Design
Short Bite Posteriors; Long Buccal, Short Lingual Design
33º 33º 0º 0º 10º 10º
The Dymon-Hue Symmetry™ 10º are designed with a functional and aesthetic occlusal surface to make them easy to set up and occlude. They may also be set up to function similar to 0º or for a “three point contact” arrangement with minimal cusp interference.
