Molded Plastic ChairsThe History of the Eames Molded Plastic Chairs

by Kaitlin Handler

Molded Plastic ChairsThe History of the Eames Molded Plastic Chairs

by Kaitlin Handler

Molded Plastic Chairs

1

On Thursday, October 23, 1947, a dinner was held at the Rainbow Room in Manhattan. Attended by various leaders of the United States furniture industry, and presided over by Nelson A. Rockefeller, Presid-ent of the Museum of Modern Art, the event announced the Interna-tional Competition for Low-Cost Furniture Design.

Various addresses were given that evening expressing concern over fact that, while world government and industries were focusing on the problem of affordable housing, min-imal attention was being paid to the “design and production of good, inexpensive and attractive furnit-ure.” The announcement made that evening highlighted the need of

Molded Plastic Chairs

2

for well-designed, moderately pri-ced furnishings for the vast majority of people; furnishings that could be easily moved, stored and cared for, thus meeting the demand.

The project, brought to the atten-tion of the Museum of Modern art by the Museum Design Project, a non-profit organization which rep-resented prominent retail merchants throughout the country, was meant to improve low-cost furniture through the cooperation of talent in the fields of design and research. The designers, pared up with one of six MoMA-se-lected design-research teams, were encouraged to utilize new materials, tools and production methods to fo-cus their attention to the production

Molded Plastic Chairs Molded Plastic Chairs

2 3

quality and inexpensive furnishings for the modern home.

The culmination of the exercise would result in an exhibition slated to be held at the Museum of Mod-ern Art in New York City, as well as the franchise of the prize-winning furnishings for sale in those retail establishments associated with the Museum Design Project.

On January 5, 1948, the International Competition for the Design of Low-Cost Furniture officially opened for submission, with prizes and grants totaling $50,000. The closing of the competition was announced as midnight, October 31, 1948, with the winners announced by the jury two months after the closing date.

Molded Plastic Chairs

4

Participants were directed to submit their entries anonymously to Edgar Kaufmann, Jr., Director of Industrial Design at the Museum of Modern Art. Submissions were to include plans not exceeding 20” x 30” sketch boards which indicated elevations, details of construction and cross sections of the proposed furniture. In addition, the competitors were in-structed to send in a working model of each unit submitted, not less than ¼ full size.

The guidelines for the competition outlined that the intent was to “obtain furniture capable of being adapted to a variety of uses.” Acceptable fur-nishing submissions included seating units such as upright and lounge chairs, sofas, benches or daybeds, or

Molded Plastic Chairs Molded Plastic Chairs

4 5

storage units for household or per-sonal effects. There was no restriction on the total number of entries that a competitor could submit. First, second and third prizes would be handed out separately for seating and storage entries.

Charles Eames was announced as participating in the project with the University of California, Los Angeles Department of Engineering.

November 28, 1948: Judging of Low Cost- Furniture Competition by Jury made up of various personalities such as housewives, engineers, architects, and curators.

After nearly 3,000 entries submit-ted, on January 18, 1949, Nelson

Molded Plastic Chairs

6

A. Rockefeller presented awards to the winners of the International Low-Cost Furniture Competition, stating that the designs made “a real contribution to the improvement of standards of living.” Charles Eames along with the University of Califor-nia, Los Angeles, was announced as the second prize winner for seating units, and received the cash prize of $2,500. Eames contribution, La Chaise received an honorable men-tion. The chair which was awarded the second prize was stamped steel, not fiberglass. The shell chair is believed to have been awarded a prize because of its thoroughly inventive base system. This system allowed for the shell to be utilized in a variety of different environments, be it in home of office life, seamlessly able to

Molded Plastic Chairs Molded Plastic Chairs

6 7

suit the needs of the consumer with the selection of the appropriate base type, and choice of arm or side chair. No other submission included such customizable variations.

“Early” 1949, In keeping with the Eameses constant striving to improve their designs, Charles sought out a change in production method for the now prize winning design. The re-examining of materials met the concerns of Herman Miller as far as production costs were concerned, as the price of steel molding was quite costly (seventy to eighty thousand dollars in 1949). Additionally, the original steel molded chairs had possibility of rusting after time and, additionally, were cold to the touch. Because of this, temperature issue

Molded Plastic Chairs

8

Molded Plastic Chairs Molded Plastic Chairs

8 9

the chairs needed a neoprene coating added to the production process in order to ensure comfort for the con-sumer. This, with the added step and cost of labor, added an unwanted rise in cost to the chair.

Charles, with craft paper mock-up of the shell chair in tow, arrives at the workshop of John Wills, a noted fiberglass manufacturer and boat builder. In 1947 Wills had developed a manufacturing technique which allowed for fiberglass to cure at room temperature, eliminating the need for heat and pressure to be involved the process. Charles asked John to produce a fiberglass shell from his model. John Wills agreed to do so for a fee of $25.00.

Molded Plastic Chairs

10

The technology for working in fiber-glass didn’t allow for female molds to be produced, only male, which guar-anteed that the craft paper mockup would be destroyed in the process.

Two weeks later Charles arrived to view the prototypes that Wills had produced. Unable to pay for the two prototypes produced in the work-shop, Charles paid for one, leaving the second perched on the cylin-drical piece of corrugated metal from a disassembled agricultural feeder. This piece of design history has since been donated to the Henry Ford Museum as part of the Herman Miller Consortium.

The shells which ultimately went into production are identical in shape

Molded Plastic Chairs Molded Plastic Chairs

10 11

and dimension to the original Wills prototype. The dimensionally correct casting would be made for a “Keller” milling machine to make a female mold of the prototype, which would then carve the opposite male die.

September 1949: Zenith Plastics re-ceived a phone call from the Charles Eames with a request for represen-tatives from the company to come in to the Eames Office and discuss a possible application for fiberglass. After showing up several hours late for the meeting with Sol Fingerhut, (a prior researcher in Owens Corining Fiberglass laboratories, who had pre-viously developed fiberglass airplane wings for the US Air Force), and Irv Green (also from Owens Corning), Charles immediately launched into

Molded Plastic Chairs

12

his discussion of the project, resulting in a four hour conversation.

His concerns revolved around the possible issues that might arise with fiberglass production of his design, namely how to adhere the base to the shell, and how to treat the edge. Charles wanted to ensure a seamless design by incorporating a radius edge. These issues were resolved with the adherence of “buttons” to the shell with epoxy adhesives where the base met which allowed for it to be screwed in and secured, as well as treating the edge of the chair with rope. The rope-edge was ultimately abandoned because it added an addi-tional step to the production cost and upped the price of the chair.

Molded Plastic Chairs Molded Plastic Chairs

12 13

Tackled first was the armchair. It was believed that if the armchair could be produced, the sidechair would soon follow, as its design was less complex to produce. The tooling equipment was purchased by Zenith Plastics at no overhead cost to Herman

On November 4, 1949, an agreement was drafted outlining the partnership between the Zenith Plastic Company and the Herman Miller Furniture Company to produce the “Fiber-glass Armchair Designed by Charles Eames which won a prize in the Mu-seum Design Project of the Museum of Modern Art” which stipulates an attempt to turn out acceptable shells within 60 days for display in Chicago on January 9, 1950. The first order was for 2000 shells. The contract was

Molded Plastic Chairs

14

one page long – according to Charles it was because “if it won’t fit on one page, it’s not a friendly contract.”

Herman Miller made the individuals involved in their projects feel like part of the company’s family. Sol Fing-erhut and Irv Green relished in the fact that HMI and the Eames Office considered them valued contributors and attached much importance to the work that they did for the company.

It was in the Zenith workshops that Charles shot his iconic film on the making of the fiberglass shell chair.

Sol and Irv really appreciated what the Eameses were contributing to the world. Although they initially had hesitations about understanding

Molded Plastic Chairs Molded Plastic Chairs

14 15

what exactly “Good Design” meant, Charles absolutely took the time to explain the value of the process and explain to them the reasons behind the production of their design. Ac-cording to Fingerhut:

“A big part of the time was educating us, so we could understand what he was talking about, because initially we didn’t. We knew technically what we could do, from a technical stand-point, but we didn’t understand, we knew nothing about furniture busi-ness, we knew nothing about modern furniture, we knew nothing about, other that what he was saying, what his objectives were, and we didn’t understand that. We did, after five hours; believe me, we did. Because he was absolutely fantastic, in the way he

Molded Plastic Chairs

16

would really kind of pick us up and carry us along with him in his discus-sions. This was his method.”

Ultimately the men states that they were proud to be part of something that became the subject of design books, museum prizes and awards, as well as remaining proud of getting to know what Good Design meant to the world.

A joint series of exhibitions between the The Museum of Modern Art, and the Merchandise Mart in Chicago entitled “Good Design,” meant to exhibit the best examples of modern design, opens January 16, 1950. The Eames fiberglass shell chair is on dis-play along with other models of win-ning designs from the International

Molded Plastic Chairs Molded Plastic Chairs

16 17

Low-Cost Furniture Competition.

Winning designs from the Interna-tional Low-Cost Furniture Com-petition on exhibit at the Museum of Modern Art; officially for sale at Sachs Quality Furniture, May to July 1950. The corresponding exhibition catalogue entitled Prize Designs for Modern Furniture outlines the winners of the competition and notes that the Eames chair is the first piece of furniture to be made of “fibre glass…never before used in furniture.” The chair is praised for its smooth surface, virtual indestruc-tibility, and the flexibility of design proposed by the series of bases avail-able, prominently illustrated in the corresponding photograph.

Molded Plastic Chairs

18

“We knew technically what we could do, from a technical stand-point, but we didn’t understand, we knew nothing about furniture business,”

Molded Plastic Chairs Molded Plastic Chairs

18 19

May 1950, the winning designs officially on sale at Sachs Quality Furniture in New York City. The col-laboration between the Competition and Sachs seems to have been a good fit, as the President of the company Richard C. Sachs, was himself inter-ested in the virtues of providing for the community as a whole:

“Good business and profit making no longer signify solely sound mer-chandizing, intelligent price policies, and efficient service and deliveries to customers. Today, good business must also connote an intelligent in-terest and concern for what happens in each community. The community is good business, because without the community, there would be no business…if the business recognizes

Molded Plastic Chairs

20

its inherent function and it is living in a real world in modern society then to do good also means active partici-pation in the life of the community…When business and industry in the United States awakens to the realiza-tion that the good and the profitable can spring from the same seed, they will have discovered a formula for producing profits and benefitting society unequalled since the Industri-al Revolution”

In ARTnews, Edgar Kauffman wrote extensively about the Eames win at the Low Cost Furniture Competition, and of the process of the designer:

“…he is creating a design tradition…engaged in an infinitely adventur-ous and rigorous exploration of the

Molded Plastic Chairs Molded Plastic Chairs

20 21

world around him. At the same time he is an ardent experimenter, trying every possible way to use his finds singly and in combinations until they are transmuted from mere loot into elements of a new design. The end products are composed of the stuff of ordinary living and ye they are integrated and heightened far beyond that.”

In this article, Kauffman discusses the “magnificent new material” out of which the shell chairs are produced. It praises the chair for being tough, while still soft to the touch, all the while flowing naturally to create the curvilinear shapes that Eames favors. Kauffman tells the reader that the plastic, embedded with glass fibers, takes colors easily.

Molded Plastic Chairs

22

The colors were embedded into the fiberglass during the beginning stages of production. After the initial shape of the chair had been formed, following the application of the glass threads, the colored ink would be applied to the surface and then em-bedded deep into the threads through a pressurized process. The original colors composed of by the Eameses, mostly under the scrutiny of Ray, were Greige (a portmanteau which hinted at a grey/beige), Elephant Hide Grey and Parchment, which was notoriously translucent. Shortly after, still early in the production, Sea Foam Green was added, along with yellow and red.

These colors were labored over lov-ingly. Charles and Ray would spend

Molded Plastic Chairs Molded Plastic Chairs

22 23

endless hours in the factory, tweaking and making slight alter-ations to the specifications of each color option, often creating several chairs in one day in order to ensure perfection. The color options devel-oped were those which would most seamlessly blend with most the most number of interiors.

According to Sol Fingerhut, Charles was never quite satisfied with the result of the coloring of the fiberglass. He had always envisioned the result as a solid, uniform, matte finish color.

Molded Plastic Chairs

28

Molded Plastic Chairs Molded Plastic Chairs

28 24

This essay, Molded Plastic Chairs The History of the Eames Molded Plastic Chairs by Kaitlin Handler, is set in Adobe Devanagari. This typeface was designer by Tim Holloway, Fiona Ross and John Hudson in 2005. It was produced as a requirement for Explorations in Typography under the direction of Debra Drodvillo, at Parsons The New School for Design, on April 4, 2013.