Integrates with existing BuildingManagement Systems
Primary and Secondaryheating circuits within
same cable
TURBO HEATAutomatically compensatesfor extremes in temperature
Sustainable and EnergyEfficient
Monitored Thermal Protection for Sprinkler Pipework
Designed for automatic firesprinkler systems
Designed to meetBS EN 62395-1:2006
Quickly Test Integrity ofHeating Cable
Constant MonitoringNotification of faults
The ProMinder Advanced Heat System has been developedto provide a heating system with high reliability and builtinfault tolerance and monitoring as well as simplifyinginstallation and maintenance for a range of applicationsincluding pipe frost protection. The system has beendesigned to meet the requirements of BS EN 12845 section11.1.2.2 and specifically for the automatic fire sprinklerindustry.
A range of eight cables provide frost protection for pipingfrom 5m – 150m. The controller allows the heat output to beselected during installation of 10W/m, 15W/m and 20W/m.Automatic turbo heat provides a rapid heatup and powerboost in extreme cold environments.
• Patent Pending• Complies withBS EN 623951:2006
• Simple to install• 8 colour coded wires to coverpiping between 5m 150m
• Fully earthed protectedcable for maximum safety
• IPX7 rated cable• IP65 rated controller
Technical DataDimensions (controller): 182mm(W) x 180mm(H) x 90mm(D)Construction (wire): Tricore heating element with integral earth coverInsulation: Double insulatedVoltage: 240Vac 50/60HzApprovals: CE Marked, RoHS CompliantWire Overall Diameter: 6.35mm ±0.2mmMinimum Bend Radius: 25mmPower Range: 100W – 3000W (10W/m, 15W/m, 20W/m)IP Rating (wire): IPX7IP Rating (controller): IP65
Construction (Wire)Thermal Conductor: 3x 105˚C rated tough polymer insulated
resistance wiresOuter Insulation: Ultratough polymer protective coatingEarth Protection: 24x ø0.2mm low resistance alloy &
100% coverage polyesterbacked aluminium foil
OVERVIEW
FEATURESHeaterWire From To
1 5m 9m2 9m 15m3 15m 25m4 25m 42.5m5 42.5m 60m6 60m 92m7 92m 120m8 120m 150m
Length (of piping)
• Fault output for connection toBMS/SCADA system
• TURBO Heat• Sustainable and energy efficient• Primary and secondaryheater circuit within one wire
• Automatic switchover if oneheater circuit fails
• M2M capable
http://tinyurl.com/8kw77p2
Notification of Faults
Constant monitoring24/7 365 days a year
Checks both heatercircuits every minute
Quickly test integrityof each circuit
