Date post: | 05-Sep-2014 |
Category: |
Services |
Upload: | monks-home-improvements |
View: | 43 times |
Download: | 1 times |
The Best Times to Paint Exteriors in Canada
By Monk’s Home Improvements
In a recent article by BusByway, the painting
company, Calgary recommends July, August and
September to be optimal exterior painting months. This
is because the weather in these months is always the best for painting outdoors.
The company Platinum Pro Painters- Calgary is the leader
in painting and renovating homes in the Calgary, Okotoks, Airdrie, and
Cochrane areas in Canada.
Most people think that the early summer months are good
times to paint the exterior of their houses and stain their
decks.
However, even though people want to be outside in the warm
weather for summer, it is difficult when the weather
conditions outside are rainy, cold or too humid.
Paint projects need to be completed when the conditions
are optimal- meaning when there is a consistent
temperature. For Canada, that occurs in July, August and
September.
Humidity and heat can cause problems and make it difficult for the paint to cure properly
and cause it to dry too fast and unevenly.
Not only do the painters pay attention to the weather conditions they also pay
attention to the direction of the property to the sun.
For example, according to the painters, the north side of a
house receives the least amount of sun, while the south side gets the greatest amount
of sun exposure.
It is important to consider the location and direction of the sun when planning how and where to start painting your
house.
Everyone wants the best results for a home project,
according to the painters, one way to ensure that you receive
the best results of your painting job is to paint when the weather is dry and warm
with low humidity.
In addition to the company and painting team’s 60 years of
experience, they also have the proper equipment for the best
exterior painting results including tarps, ladders,
scaffolding and sprayers.
It is imperative to have knowledge of products, weather conditions, and sustainability of
materials, in addition to attention to detail, and being a
good worker!