C M Y K Proma Reha strana 1
PRODUCTS CATALOGUE
update 2008
C M Y K Proma Reha strana 2
The history of our company has startedin 1990, when the production was started inour original headquarters in Ceska Skalice.The first product for the health care sector was
made in 1991, it was the Walking assistant U-1 that is afterseveral development modifications still in our product range.Starting in 1992, adjustable beds for care and hospital facilitiesbecame the main part of our production program.
The period of dynamic development of production for healthcare started in 1995 when our company transformed into a Ltd.company. This year also brought substantial expansion of productrange in beds and also other products such as trolleys, bedsidecabinets, mattresses, bathroom products, etc.
In 2000 we first saw dynamic progress in company growth thatuntil today reaches tens of percent each year. Eventually theproduct range was extended with scale of products for specificbranches. In this period the number of employees was 20 to 25persons, currently the company has around 85 employees andseveral tens of external cooperators and suppliers.
Together with the technical, functional and design developmentof our products, we also understood the need for improving
the control management and particular processes running inthe company. For these reasons we gradually introducedthe quality management system according to ISO 9001:2000and later also ISO 14001:2004 standards. We are continuouslyupgrading ecological parameters of our products which wasregarded in 2005 by entitlement to use the “Environmentallyfriendly product” trademark and the related “Czech quality”trademark issue by the government of the Czech Republic.In 2005 our company was also included in the group ofcompanies entitled to use the trademark “Czech product”.
Our products are continuously tested by authorized bodies andtheir usable and functional characteristics are documentedby appropriate certificates. All our products fulfill all relevantand valid Czech and European standards, all products have CEcertificates. Many foreign customers from EU countries as wellas outside EU repeatedly put their trust in our products, wehave direct or indirect representation on many markets abroad.
Our company emphasizes on development of our products basedon our inventions but at the same time we try to implementimprovements based on the experience and feedback fromour customers. In case of interest we are ready and ableto fulfill specific requests and requirements of our customers.
We are holders of following certificates and users of mentioned registered marks.
Company Headquarters in Česká Skalice Distribution station in Česká Skalice Production shop in Česká Metuje
3
C M Y K Proma Reha strana 3
�� Wheels of diameter 150 mm in standard�� Electric central brake with direction lock�� Fifth wheel in the undercart center�� Bed illumination for night safety�� Foot pedals for height adjustment on both sides of patient area �� Three-column construction �� Lateral tilt of the patient area�� All parts of patient area adjustable by electric actuators�� Divided folding plastic side-rails with hard glass fulfillment�� Removable bed ends with hard glass fulfillment�� Patient area extension 2 x 10 cm�� Patient area made of HPL �� Patient area sliding 30 cm back and forth for full X-ray scanning�� Electric movement of RTG cassette under patient area�� Scale system for accurate weighing of patient�� Controllers built in the side-rails and nurse control panel�� Side-rail controllers function lock at the nurse control panel�� Activation START button�� Predefined functions
(Emergency CPR release, cardiac chair, examination position, TR)�� Slide-out holder for bed linen under the bed ends�� Bumper wheels on the corners
ICU adjustable hospital bed Triton Plus
Technical parameters:
�� Maximum overall dimensions: 2320 x 1065 mm�� Recommended mattress dimensions: 2000 x 850 mm�� Patient area extension: 200 mm�� Patient area height (without mattress): 497–897 mm�� Side-rails height over patient area: 436 mm�� Bed ends height over patient area: 510 mm�� Maximum lateral tilt angle: 20°�� Maximum Trendelenburg angle: 22°�� Maximum rev. Trendelenburg angle: 18°
Back part:
Length: 845 mmMaximum tilt angle: 72°Autoregression length: 120 mm
Pelvic part:Length: 150 mm
�� RTG cassette drawer dimensions: 500 x 550 mm�� Maximum working load of scale: 300 kg�� Weighting accuracy in absolute mode: ± 0.2 kg�� Weighting accuracy in differential mode: ± 0.05 kg�� Bed weight excl. mattress and accessories: 270 kg�� Maximum load of the cross bar and strip: 75 kg�� Safe work load of bed including mattress and accessories: 250 kg
Leg part:Length: 340 mmMaximum tilt angle: 38°Autoregression length: 80 mm
Calf part:Length: 615 mmMaximum tilt angle: 32°
Accessories:
�� Horizontal cross-bar with the strip�� Infusion rod �� Oxygen bottle holder�� Urine bags holder�� Euro bar for tools�� Nebolization holder�� Extension set
Holder for cover and pillows Integrated side-rail controllers Scale, nurse and RTG panel
Patient area dimensions: 85 x 200 cmMax. overall dimensions: 107 x 232 cmMax. load: 250 kg, weight 270 kg
4
C M Y K Proma Reha strana 4
�� Wheels of diameter 150 mm�� Central brake with direction lock�� Foot pedals for height adjustment on both sides of patient area�� Two-column construction �� Back and leg part of patient area adjustable by electric actuators�� Calf part adjustable by gas spring�� Divided folding plastic side-rails with hard glass fulfillment�� Removable bed ends with hard glass fulfillment�� Integrated patient area extension�� Patient area made of HPL�� Controllers built in the side-rails and nurse control panel�� Side-rail controllers function lock at the nurse control panel�� Activation GO button�� Predefined functions
(emergency CPR release, cardiac chair, examination position, TR)�� Slide-out holder for bed linen under the bed ends�� Bumper wheels on the corners
Patient area dimensions: 85 x 200 cmMax. overall dimensions: 107 x 232 cmMax. load: 230 kg, weight 220 kg
ICU adjustable hospital bed Calypso Style
Technical parameters:
�� Maximum overall dimensions: 2320 x 1065 mm�� Recommended mattress dimensions: 2000 x 850 mm�� Patient area extension: 200 mm�� Patient area height (without mattress): 497–897 mm�� Side-rails height over patient area: 436 mm�� Bed ends height over patient area: 510 mm�� Maximum Trendelenburg angle: 22°�� Maximum rev. Trendelenburg angle: 18°
Back part:
Length: 845 mmMaximum tilt angle: 72°Autoregression length: 120 mm
Pelvic part:Length: 150 mm
�� Bed weight excl. mattress and accessories: 220 kg�� Safe work load of bed including mattress and accessories: 230 kg�� Maximum load of the cross bar and strip: 75 kg�� RTG cassette drawer dimensions: 500 x 550 mm
Leg part:Length: 340 mmMaximum tilt angle: 38°Autoregression length: 80 mm
Calf part:Length: 615 mmMaximum tilt angle: 32°
Accessories:
�� Horizontal cross-bar with the strip�� Infusion rod �� Oxygen bottle holder�� Urine bags holder�� Euro bar for tools�� Nebolization holder�� Extension set
Central brake CPR + foot pedal Controller built in side-rails
ICU adjustable hospital bed Calypso Classic
5
C M Y K Proma Reha strana 5
Patient area dimensions: 85 x 200 cmMax. overall dimensions: 107 x 232 cmMax. load: 230 kg, weight 220 kg
�� Wheels of 150 mm diameter, central brake and direction lock�� Plastic cover of the undercart with stainless metal plate connection�� Back part surface made of HPL, other patient area parts
of metal lamellae �� Height adjustment of patient area by electric columns�� Adjustment control by handheld controller and nurse control panel�� Foot control of patient area height adjustment on both sides�� Backup battery, quick release of back and leg part,
autoregression of back and leg part �� Back and leg part of patient area adjustable by electric actuators�� Calf part of patient area adjustable by gas spring�� Divided stainless steel fold up side rails with HPL filling�� Easily removable metal bed ends with HPL filling�� Integrated patient area extension�� Handheld controlled lock at the nurse control panel�� Function activation button at the nurse control panel�� Nurse control panel with range of predefined functions
(emergency CPR release, cardiac chair, examination chair, TR)�� Sliding holder for bed linen under the bed end�� Bumper wheels on the corners
Technical parameters:
�� Maximum overall dimensions: 2320 x 1065 mm�� Recommended mattress dimensions: 2000 x 850 mm�� Extension of patient area: 200 mm�� Patient area height (without mattress): 497–897 mm�� Side-rails height over patient area: 436 mm�� Bed ends height over patient area: 510 mm�� Maximum Trendelenburg angle: 22°�� Maximum rev. Trendelenburg angle: 18°
Back part:
Length: 845 mmMaximum tilt angle: 72°Autoregression length: 120 mm
Pelvic part:Length: 150 mm
�� Bed weight without accessories and mattress: 220 kg�� Safe work load of bed including mattress and accessories: 230 kg�� Maximum load of horizontal cross bar and strip: 75 kg�� Dimensions of RTG cassette drawer: 500 x 550 mm
Leg part:Length: 340 mmMaximum tilt angle: 38°Autoregression length: 80 mm
Calf part:Length: 615 mmMaximum tilt angle: 32°
Accessories:
�� Horizontal cross-bar with the strip�� Infusion rod�� Urine bags holder�� Nebolization holder�� Reading lamp
Handheld controller + CPR Central brake Nurse control panel
6
C M Y K Proma Reha strana 6
�� Wheels of diameter 150 mm�� Central brake with direction lock�� Foot pedals for height adjustment on both sides of patient area�� Two-column construction �� Back and leg part of patient area adjustable by electric actuators�� Calf part adjustable by gas spring�� Divided folding plastic side-rails with HPL fulfillment�� Removable bed ends with HPL fulfillment�� Integrated patient area extension�� Patient area made of HPL�� Controllers built in the side-rails and nurse control panel�� Side-rail controllers function lock at the nurse control panel�� Activation GO button�� Predefined functions
(emergency CPR release, cardiac chair, examination position, TR)�� Slide-out holder for bed linen under the bed ends�� Bumper wheels on the corners
Patient area dimensions: 85 x 200 cmMax. overall dimensions: 100 x 213 cmMax. load: 230 kg, weight 125 kg
Adjustable hospital bed Apollo Style
Technical parameters:
�� Maximum overall dimensions: 2320 x 1065 mm�� Recommended mattress dimensions: 2000 x 850 mm�� Patient area extension: 200 mm�� Patient area height (without mattress): 497–897 mm�� Side-rails height over patient area: 436 mm�� Bed ends height over patient area: 510 mm�� Maximum Trendelenburg angle: 22°�� Maximum rev. Trendelenburg angle: 18°
�� Bed weight excl. mattress and accessories: 220 kg�� Safe work load of bed including mattress and accessories: 230 kg�� Maximum load of the cross bar and strip: 75 kg�� RTG cassette drawer dimensions: 500 x 550 mm
Accessories:
�� Horizontal cross-bar with the strip�� Infusion rod �� Oxygen bottle holder�� Urine bags holder�� Euro bar for tools�� Nebolization holder�� Extension set
Nurse control panel Holder for cover and pillows Central brake Removable plastic siderails
Back part:
Length: 770 mmMaximum tilt angle: 76°Autoregression length: 80 mm
Pelvic part:Length: 230 mm
Leg part:Length: 400 mmMaximum tilt angle: 35°
Calf part:Length: 530 mmMaximum tilt angle: 27°
Height adjustment foot pedal
Adjustable hospital bed Apollo Classic
7
C M Y K Proma Reha strana 7
Patient area dimensions: 85 x 200 cmMax. overall dimensions: 97 x 215 cmMax. load: 230 kg, weight 125 kg
�� Wheels of 125 mm diameter, central brake and direction lock�� Plastic cover of the undercart with stainless metal
plate connection�� Patient area surface made of removable wire mesh �� Bumper wheels on all corners�� Height adjustment of patient area by electric columns�� Adjustment control by handheld controller and nurse control
panel at the footboard�� Backup battery and quick release of the back part �� Back and leg part adjustment controlled by electric actuators�� Calf part adjustment by rasters�� Easily removable metal bed ends with HPL fulfilling �� Folding steel powder coated side-rails �� Handheld controller lock at the nurse panel�� Nurse panel with variety of predefined functions
(Emergency CPR release, cardiac chair, TR, examination position)
Technical parameters:
�� Maximum overall dimensions: 2150 x 970 mm�� Recommended mattress dimensions: 2000 x 850 mm�� Patient area height (without mattress): 450–850 mm�� Side-rail height over patient area: 340 mm�� Bed ends height over patient area: 390 mm�� Maximum Trendelenburg angle: 19°�� Maximum rev. Trendelenburg angle: 19°
Back part:
Length: 770 mmMaximum tilt angle: 76°
Pelvic part:Length: 230 mm
�� Bed weight without accessories and mattress: 125 kg�� Safe work load of bed incl. mattress and accessories: 230 kg�� Maximum load of horizontal cross bar and strip: 75 kg
Leg part:Length: 400 mmMaximum tilt angle: 35°
Calf part:Length: 530 mmMaximum tilt angle: 27°
Accessories:
�� Horizontal cross-bar with the strip�� Infusion rod�� Urine bags holder�� Nebolization holder�� Reading lamp
Removable wire mesh Nurse control panel Central brake Handheld controller
8
C M Y K Proma Reha strana 8
�� Wheels of 125 mm diameter, central brake and direction lock�� Plastic undercart cover with stainless metal plate connection �� Patient area made of metal lamellae �� Bumper wheels in bed corners �� Height adjustment of patient area by electric columns�� Adjustment by handheld controller and nurse control panel�� Back and leg part adjustment controlled by electric actuators�� Calf part of patient area adjustable by rasters�� Metal UNI side-rails including integrated AL mouldings, type S�� Handheld controller function lock at the nurse control panel �� Nurse control panel with range of predefined functions
(emergency CPR release, cardiac chair, TR, examination position)�� Slide-out holder for bed linen under the bed end
Patient area dimensions: 90 x 200 cmMax. overall dimensions: 103 x 206 cmMax. load: 230 kg, weight 125 kg
Electric adjustable care bed Hestia
Technical parameters:
�� Maximum overall dimensions: 2150 x 970 mm�� Recommended mattress dimensions: 2000 x 850 mm�� Patient area height (without mattress): 450–480 mm�� Side-rails height over patient area: 350 mm�� Bed ends height over patient area: 510 mm�� Maximum Trendelenburg angle: 19°�� Maximum rev. Trendelenburg angle: 19°
�� Bed weight without accessories and mattress: 125 kg�� Safe work load of bed incl. mattress and accessories: 230 kg�� Maximum load of horizontal cross bar and strip: 75 kg
Accessories:
�� Horizontal cross-bar with the strip�� Infusion rod�� Urine bags holder�� Nebolization holder�� Reading lamp
Back part:
Length: 770 mmMaximum tilt angle: 76°
Pelvic part:Length: 230 mm
Leg part:Length: 400 mmMaximum tilt angle: 35°
Calf part:Length: 530 mmMaximum tilt angle: 27°
Handheld controller Cover and pillow holder Central lock Nurse control panel
Verticalization hospital bed PLX-N85-0
9
C M Y K Proma Reha strana 9
Patient area dimensions: 85 x 200 cmMax. overall dimensions: 97 x 215 cmMax. load: 170 kg, weight 145 kg
�� Wheels of 125 mm diameter, central brake and direction lock�� Patient area made of steel lamellae�� Bumper wheels in all corners �� Bed height adjustment using levers �� Control of bed adjustment by handheld controller�� Backup battery and quick release of the back part�� Back and leg part of patient area adjustable
by electric actuators�� Calf part adjustable by rasters �� Easily removable chromed bed heads with HPL fulfillment�� Folding steel chromed side-rails �� Handheld controller functionality lock using magnetic key�� Patient area verticalization indication
Patient area tilt indication
Technical parameters:
�� Maximum overall dimensions: 2150 x 970 mm�� Recommended mattress dimensions: 2000 x 850 mm�� Patient area height (without mattress): 480–880 mm�� Side-rails height over patient area: 340 mm�� Bed ends height over patient area: 390 mm�� Maximum Trendelenburg angle: 19°�� Maximum rev. Trendelenburg angle: 19°�� Maximum verticalization angle: 70°
Back part:
Length: 770 mmMaximum tilt angle: 76°
Pelvic part:Length: 230 mm
�� Bed weight without accessories and mattress: 145 kg�� Safe work load of bed incl. mattress and accessories: 170 kg�� Maximum load of horizontal cross bar and strip: 75 kg
Leg part:Length: 400 mmMaximum tilt angle: 35°
Calf part:Length: 530 mmMaximum tilt angle: 27°
Accessories:
�� Horizontal cross-bar with the strip�� Infusion rod�� Urine bags holder�� Nebolization holder�� Reading lamp
Patient area dimensions: 55 x 110 cmPatient area height: 74 cmOverall bed dimensions: 69 x 136 cmBed ends height: 155 cmMaximum load: 70 kg Weight: 45 kg
�� New design of bed improved from the classic cage look�� Metal construction with powder coated surface�� Metal wheels of 100 mm diameter, two wheels with direction lock�� Patient area of metal lamellae for easy cleaning�� Back part adjustable by raster �� Fabric underlay of the back part – very important safety measure�� Bumper wheels in the bed corners�� Accessory holders included in the frame (crossbar holder, IV holder
and extension)�� Sliding metal powder coated safety side-rails with lock in any position –
pedal unlocking out of the patient reach – very important safety measure�� Height adjustment of side-rails by gas springs controlled by foot pedals
on both sides of the patient area �� Optional horizontal crossbar with the strip, infusion rod or extension set�� Selection of colors from the RAL color range
CChhiilldd aaddjjuussttaabbllee bbeedd BBuuddddyy MM--00
CChhiilldd aaddjjuussttaabbllee bbeedd BBuuddddyy LL--TT�� New design of bed improved from the classic cage look�� Metal construction with powder coated surface�� Metal wheels of 100 mm diameter, two wheels with direction lock�� Patient area of metal lamellae for easy cleaning�� Height adjustment of patient area into 8 positions�� Mechanical tilt of patient area into Trendelenburg and reverse
Trendelenburg positions�� Back part of patient area adjustable by raster �� Fabric underlay of the back part – very important safety measure�� Bumper wheels in the bed corners�� Accessory holders included in the frame (crossbar holder, IV holder
and extension)�� Sliding metal powder coated safety side-rails with lock in any position –
pedal unlocking out of the patient reach – very important safety measure�� Height adjustment of side-rails by gas springs controlled by foot pedals
on both sides of the patient area �� Optional horizontal crossbar with the strip, infusion rod or extension set�� Selection of colors from the RAL color range
Patient area dimensions: 70 x 140 cmPatient area height: 80–117 cmOverall bed dimensions: 84 x 166 cmBed ends height: 155 cmMaximum load: 70 kg Weight: 63 kg
Foot pedal for siderail adjustment Adjustable back part
Control handle Bumper wheels accessory holders
10
C M Y K Proma Reha strana 10
Child adjustable bed Buddy
Upholstered armchairs Comfort
11
C M Y K Proma Reha strana 11
�� Removable and height adjustable seat with front-back sliding option (height from floor 47 cm to 49 cm) �� Removable and height adjustable armrests (height from floor 64 cm to 67 cm) �� Ergonomically formed backrest with handle bar for easy moving�� Chair frame and armrests made from solid wood and varnished�� Seat and backrest double upholstered, lower layer from permeable
and waterproof material, upper layer from PES, ALCATRAZ type�� Seat and backrest cover removable for washing�� Wide selection of upholstery and wood surface designs �� Can be delivered with removable height adjustable armrests, with fixed
armrests or without armrests
CCoommffoorrtt FFiitt
�� Removable and height adjustable seat with front-back sliding option (height from floor 47 cm to 49 cm) �� Removable and height adjustable armrests (height from floor 64 cm to 67 cm) �� Ergonomically formed backrest with handle bar for easy moving�� Chair frame and armrests made from solid wood and varnished�� Seat and backrest double upholstered, lower layer from permeable
and waterproof material, upper layer from PES, ALCATRAZ type�� Seat and backrest cover removable for washing�� Wide selection of upholstery and wood surface designs �� Can be delivered with removable height adjustable armrests, with fixed
armrests or without armrests
CCoommffoorrtt AAccttiivvee
W x H x D: 63 x 107 x 61 cmLoad capacity: 150 kg Weight: 11,5 kg
W x H x D: 64 x 96 x 62 cmLoad capacity: 150 kg Weight: 10,5 kg
12
C M Y K Proma Reha strana 12
Care Furniture – model range Iris
I–1 Wardrobe wideI–2 Wardrobe narrowI–3 Cabinet with doorI–4 Cabinet with shallow drawersI–5 Linens cabinetI–6 Cabinet with alcoveI–7 Cabinet with one deep
and two shallow drawersI–8 Cabinet extension wideI–9 Cabinet extension narrowI–10 Extension for wardrobe wideI–11 Extension for wardrobe narrowI–12 Shoe cabinet wideI–13 Shoe cabinet narrowI–14 Coat rack wide mirror wideI–15 Coat rack narrowI–16 TableI–17 Rack
AAsssseemmbbllee aannyy ccoommbbiinnaattiioonn ooff tthhee ccaabbiinneettss aanndd wwaarrddrroobbeessttoo ggeett ccoommpplleettee sseett ooff ccaarree ffuurrnniittuurree..
Care Furniture – model range Iris
13
C M Y K Proma Reha strana 13
�� Left side for high shoes�� Right side for regular shoes�� Dimensions: 840 x 400 x 540 mm
�� Tilting hinged door with metal fitting�� Back panel with ventilation�� Optional extension with I-8�� Dimensions: 840 x 420 x 800 mm
�� Four drawers�� Metal sliding part parts�� Optional lockable drawers�� Optional extension with I-9�� Dimensions: 420 x 420 x 800 mm
�� Top shelf�� Three coat racks�� Mirror�� Dimensions: 840 x 180 x 1900 mm
�� Three shelf�� Height adlustment of each shelf�� Can be put on cabinets I-3, I-4 and I-7�� Dimensions: 420 x 250 x 1200 mm
�� Divided sections of inside space�� Chromed pole for hangers�� One wide and four narrow shelves�� Optional lockable door�� Optional vault for valuables�� Optional extension I-10�� Dimensions: 840 x 580 x 2000 mm
I – 12 I – 5 I – 4
I – 14 I – 9 I – 1
�� High quality furniture made from lamino�� Designed for maximum value for users�� The most exposed edges protected with 2 mm layer
of ABS, all other edges with 0.5 mm of ABS�� Metal door hinges with tightening at all doors�� Metal handles at all drawers�� Metal rectifier legs under the footboard�� Adjustable height of shelves in all cabinets�� Choose the design of surface�� We are able to supply equipment of the whole
room in the same design – also bed and bedside cabinet
C M Y K Proma Reha strana 14
�� Metal construction with powder coated surface�� Lowest drawer elevated from ground by 10 cm high pedestal �� 4 metal slide-out drawers�� Automatic lock of drawers that are not open – to prevent tilting of the cabinet
by opening more drawers
FFiilliinngg ccaabbiinneett SSKK 330011ee
Dimensions W x H x D: 42 x 128 x 64 cmDrawer height: 28 cmDrawer width: 32,5 cm
�� Metal construction with powder coated surface�� Storage space elevated from ground by 8 cm high pedestal�� Split two-part lockable door with glass panels�� Four height adjustable glass shelves (by 2,5cm steps)�� Optional wheels with brakes
MMeeddiicciinnee ccaabbiinneett SSLL 110033
Dimensions W x H x D: 100 x 180 x 44 cm
�� Metal construction with powder coated surface�� Storage space elevated from ground by 8 cm high pedestal�� Storage space dividend into open and closed part�� Two-part lockable door with glass panels �� Two-part metal lockable door �� Two height adjustable glass shelves (by 2,5cm steps) in open part�� One height adjustable glass shelves (by 2,5cm steps) in closed part�� Optional wheels with brakes
MMeeddiicciinnee ccaabbiinneett SSLL 110044
Dimensions W x H x D: 80 x 180 x 44 cmClosed part height: 53 cm
14
Medicine cabinets and filing cabinet
C M Y K Proma Reha strana 15
notes
C M Y K Proma Reha strana 16
PROMA REHA s. r. o.Riegrova 342CZ-55203 Česká SkaliceCzech RepublicGPS Loc: 50°23’32.68‘‘N, 16°3‘5.1‘‘E
Tel.: +420 491 11 22 33Fax: +420 491 54 11 85
YOUR LOCAL PARTNER
50°23’32.68‘‘N
16°3‘5.1‘‘E
CCOONNTTAACCTTSS