+ All Categories
Home > Documents > MoovingBeds Flexseries - factsheet

MoovingBeds Flexseries - factsheet

Date post: 09-Mar-2016
Category:
Upload: jesper-friis
View: 213 times
Download: 0 times
Share this document with a friend
Description:
Factsheet on the worlds most flexible bedmover for hospitalbeds
2
flexseries avoid backstrain in emergency situations - flexseries fits all bedtypes
Transcript

flexseries

avoid backstrain in emergency situations- flexseries fits all bedtypes

flexseries

Tecnical DataUniqe bed-model compliance – one tool for all bedtypes (pat pending)

Ergonomic steering interface and micro adjust finger speeder device

Max capacity 450kg bed+patient (+75 kg driver / S-model)

Max speed 9,5 kph (variable) / incline & decline capacity 12% or 70

Turning circle “true 3600” on the spot turning

Unique suspension effect for the patient (for fragile patients / spinal etc.)

Minimal noise level (<62db) & No-marking tyres

Range : 15-20km (normal conditions)

Battery indicator with low level warning (capacity: 2x38AmpH)

Built in recharger: 8,5 AmpH (6-7 hours full recharge time)

Full service concept and web-based service logbook on every MoovingBeds unit

CE-Quality & EA-1689 compliance / 12 months full warranty

Dimensions: (L/1142mm x H/1256mm x W/950mm) & weight/125kg

Safety FeaturesControlled starting and stopping and Automatic Hill start technology

Down hill assist capabilities

Variable speed switch & Half Speed Reverse

Electronic security key (with timer auto switch off)

Inoperable when charging

Anti collision belly button safety function

Electronic Horn

Make-it-Move A/S | Eli Christensens Vej 74 | DK-7430 Ikast | (+45) 3131 3499 | [email protected] | www.make-it-move.com

Drivers Stand Drivers-Stand that lets the opera-tor drive along – ensuring swift-ness and efficiency.

Remote ControlRemotecontrol enabling hospital porters to operate MoovingBeds from either end of the bed.

Extra Battery Capacity Lithium-ion battery technology.

Taylored to your needs- each hospital is different - demanding options to choose from

Y

Ø=150-200mm W=40-80mm

axel width max 800mm

X

X=740mm ÷ Y (minimum 200mm)

axel width min 405mm

Y

Ø=150-200mm W=40-80mm

axel width max 800mm

X

X=740mm ÷ Y (minimum 200mm)

axel width min 405mm

Traditional bedmover(causes stress to wheels)

MoovingBeds

Will it fit in your elevators?If you need assistance in calculating - feel free to call the number below.

True 360o Manoeurability


Recommended