hundreds of bedtypes - one tool to move them all

hundreds of bedtypes - one tool to move them all

As the name suggests it is flexible enough to move all bedtypes instead of just one custom bedtype. This makes the MoovingBeds Flex-series very popular because it saves time and solves logisti-cal issues. As this MoovingBeds-series lifts by the wheels it can lift/move a grand variety of beds and carts – leaving you in a position where you are not limited in the type of beds you choose in the future.(as long as they have wheels).

The MoovingBeds | Flex-series is a “one tool to move them all” type of bedmover. By patented technological and mechanical design it lets you move just about anything indoors as long as

it has wheels. By developing this advanced machinery we have addressed various issues hereunder: 1. Flexibility – to ease logistical and economical problems

2. Agility and power – to take the workload of the backs of your hospital porters - male or female…

3. Durability – to create a dependable machine and a sane investment

4. Intuitiveness – to make it easy to use and a prefferred work-companion

flexseries

Flexible Speed(10kmt) RemoteControlled

MoovingBeds F yes no no

MoovingBeds FS yes yes no

MoovingBeds FR yes no yes

MoovingBeds FSR yes yes yes

MoovingBeds | Flex-series - is our most sought after product.

The MoovingBeds | custom-series is a customized bedmover that does specific tasks – lifting/moving one specific bed- or cart-type. Custum-series is best suited for hospitals that have only a few bedtypes (or cart-types)

The custom-series was co-developed with the porter-staff at University Hospital Odense (OUH) to make sure that we developed what they actually needed instead of just what we supposed they would.

The 0-series was developed to the one type of bed present at OUH - In case you are interested in a custom-bedtype-mover we will alter the “grip-mechanism” to fit the specific bedtype of your choice.

Speed-Package Stamina motor that delivers extra torque to surmounts the steepest hallways with patient/bed-weights up to 400KGs. Included in package is a Drivers-Stand that lets the operator drive along – ensuring swiftness and efficiency.

Remote-Control-Package RC-unit with cord that enables porters to operate MoovingBeds from other end of bed if preffered.

customseries

customseries

MoovingBeds | Custom-series - is the right bedmover for you if you only have a single bedtype(or cart-type) at your hospital.

Product upgradeUpgrades for MoovingBeds | Flex-series & Custom-series.

Speed Package Remote-Control-Package

(included) (included)

Power Surplus yes no

Gearing upgrade yes no

Drivers-Stand yes no

User Certification System yes no

Remote control unit & cord no yes

Remote reciever installation no yes

Instruction manual no yes

Custom bed-type Speed(10kmt) RemoteControlled

MoovingBeds C yes no no

MoovingBeds CS yes yes no

MoovingBeds CR yes no yes

MoovingBeds CSR yes yes yes

MoovingBeds comes in two different models based on the same technical drive unit platform. This drive unit platform creates the unique 360 drg. steering ability making it easy to use Mooving-Beds to bring beds with patients in and out all over the hospital – the drive unit also creates a surplus of power making it easy to climb all inclining corridors and to quickly and safely stop on the way down as well.

The original MoovingBeds Custom (C-model) is an updated and improved version of an UB-Let bedmover that has been on the market in Denmark and in daily operation now for more than four years. The MoovingBeds C-model can be customized to fit most different hospital beds especially of the traditional metal-frame-bed-type. Often it would be possible to custom-fit this model to suit two or three different but similar bed types.

The new MoovingBeds Flexible (F-model) is truly 100% unique in its capacity to fit almost all various bed types and models without having to change grips/locks/or the like. This is a patent pending feature never seen before in any bedmover. Furthermore the MoovingBeds F-model can be adjusted in a way so total length added to the any bed when engaged can be reduced to a minimum (important when used in lifts) – Finally the C-model can be used for transport of any type of heavy cart, trolley, etc – as long as it has wheels (D/150-225mm). Making it possible to use the same transport auxiliary for all beds, carts and trolleys MoovingBeds Flexible presents several unique benefits to the hospital like – Improved task efficiency, Improved utilization of investment, Freedom to choose the preferred future bed system without interfering with the existing logistical system, Perfect platform for introducing total logistic optimizing systems, etc

Facts on MoovingBeds.

Further more – both MoovingBeds models have the following characteristics :

CE – Quality documentation & EA-1689 compliance documentation

No physical requirements on operator – easy to drive and operate

Max capacity: 450 kg (Bed & Patient) + 75 kg driver (Speed/S-models)

Max speed: 6 km/h (walk along) or 9,8 km/h (walk along & drive along / S-model)

In- and decline capacity: 12% or 7 drg

Steering principles: 360 dgr. turning (like for a bed pushed manually) / (Pat. Pend.)

Unique suspension effect for the patient being transported (recommended for fragile patients / spinal etc.)

Remote control option to make manual steering from head end of bed possible

Ergonomic steering interface and finger speeder device including belly button safety function

Automatic electrical parking brake safety system

Electrical key system (timer for automatic switch off – for safety)

Very low noise level (to be specified)

Battery indicator with low level warning

Battery capacity is 2×38 AmpH (or 15-20 km endurance under normal conditions)

Recharger: 8,5 AmpH (on board recharger for on the fly recharging – time from zero to full is 6 hours)

Full service concept and web-based service logbook on each MoovingBeds unit

To ensure maximum comfort for patients the lift-height is only 3 cm

Make-it-Move A/S | Eli Christensens Vej 74 | DK-7430 Ikast | (+45) 3131 3499 | hwm@make-it-move.com | www.make-it-move.com