8/3/2019 Moriseiki Aerospace En

1/16

www.moriseiki.eu

Aerospace IndustryPURE TECHNOLOGY System partner

8/3/2019 Moriseiki Aerospace En

2/16

5-Axis-machining - Engine component

8/3/2019 Moriseiki Aerospace En

3/16

The aerospace industry combines nearly

all of the high technologies of the informationage: electronics, robotics, measuring,

controls, materials and control technique.

MORI SEIKI has adapted to these demands

for a long time and is constantly developing

specific solutions for this industry.

MORI SEIKI Aerospace Industry 2 | 3

The aerospace industry is the technologydriver for the modern economy - MORISEIKI is your partner.

Whatever the demands, our engineering and

application teams make sure you get highlyefficient, made to measure solutions.

| 1 landing frame demands the highest technique | 2 represents a highefficient turbo engine | 3 turbo engine in use

8/3/2019 Moriseiki Aerospace En

4/16

Component spectrumMade to measure solutions for your

production.

Horizontal machining of an aircraft frame

8/3/2019 Moriseiki Aerospace En

5/16

Made to measure solutions for yourproduction from classic materials totitanium and inconel.

MORI SEIKI Aerospace Industry 4 | 5

| 1complete machining of a landing gear axle| 2structure part| 3landing gear axle made from inconel| 4turbo engine impeller| 5turbo engine casing

1

4

3

5

For years MORI SEIKI has been a systems partner for the aerospace

industry. Through constant development of modern production solutions

for the various structures and parts for turbines we have becomespecialists in the industry.

2

8/3/2019 Moriseiki Aerospace En

6/16

Systems PartnerKnow-how, worldwide quality standards and

a reliable network of technical engineers.

Management supportMORI SEIKI supports and offers advice in

various areas, for example investment planning

or relocation in production.

Service and Maintenance

Optimal support in service, operation,

maintenance and spare parts supply guarantee

the best in reliability.

8/3/2019 Moriseiki Aerospace En

7/16

Aerospace Systems Partner know-how,worldwide quality standards and a reliablenetwork of technical engineers.

MORI SEIKI Aerospace Industry 6 | 7

MORI SEIKI not only offers aerospace pro-

duction techniques from a range of morethan 200 machining centres, but also a world-

wide network of professionals that can offer

you advice from tool selection and program-

ming to installation and maintenance.

Our engineering team continuously works

on offering customer specific complete

solutions. MORI SEIKI offers solutions for aproblem free production start.

Technical Support

We offer you solutions for your production. From

programming and tool selection to test cutting and

installation.

Production SupportProcess solutions are constantly being optimised.

Our application technicians are always available for

all questions and problems in production.

CUSTOMER

8/3/2019 Moriseiki Aerospace En

8/16

8/3/2019 Moriseiki Aerospace En

9/16

MORI SEIKI Aerospace Industry 8 | 9

NH Series Facts:| Choose from 4 pallet sizes to meet all

customers needs

| DCG technology and Box-in-Box construction

offer low vibration and good acceleration

| Full 4th axis rotary table with Direct Drive

Technology (DDM) and minimum table indexing

range 0,001*

| Wide variety of automation solutions with

MORI SEIKIs Pallet Pool Systems

| MAPPS III: simple conversational programming

*optional

NH Series Horizontal machining centreswith remarkable technique and automation.

Horizontal Machining Centres

Technical Details NH5000 DCG NH6300 DCG NH8000 DCG

Axis travel X-/ Y-/ Z- mm 730 / 730 / 850 900 / 800 / 980 1.400 / 1.200 / 1.350

Pallet working surface mm 500 x 500 630 x 630 800 x 800

Max. workpiece weight kg 500 [700] 1.200 2.000

Max. Spindle speed min-1 14.000 [20.000] 10.000 [8.000] [15.000] 10.000 [8.000] [15.000] [18.000]

Rapid traverse rate X/Y/Z m/min 50 50 50

No. of tools capacity 40 [-240] 40 [-330] 40 [-330]

Spindle drive motor kW 22/18,5 30/25 30/25

| 1 horizontal machining of an aircraft frame | 2 NC rotary table with 2 Direct Drive Motors| 3 effective cutting optimised for your needs

8/3/2019 Moriseiki Aerospace En

10/16

ProductsThe right product for your production.

NT Series no compromise integration ofmilling and turning machining.

NT Series Facts:| Complete machining with a maximum of 2 spindles and 2 turrets

for 9 controlled axes

| DCG Technology at the X- and Z-axis

| Sturdy column with Box-in-Box construction and octagonal ram (ORCTM)

at the Y-axis for extreme rigidity

| B-axis with DDM (Direct Drive Motor) with a rotation range of +/- 120

| MAPPS III with 3D interference checking function

Integrated Mill Turn Centres

Technical Details NT3100 DCG NT3150 DCG NT3200 DCG NT4200 DCG NT4250 DCG NT4300 DCG NT5400 DCG

Max. bar diameter mm 40 52 65 65 80 90 103

Max. machining length mm 1.022 1.022 1.022 1.596 1.562 1.518 1.800Max. machining diameter mm 600 600 600 660 660 660 920

Max. spindle speed min-1 6.000 (8.000)* 6.000* 5.000* 5.000* 4.000* 3.000* 2.400*

Max. tool spindle speed min-1 12.000 12.000 12.000 12.000 12.000 12.000 8.000

Axis travel X- /Y- mm 685 / 125 685 / 125 685 / 125 750 / 210 750 / 210 750 / 210 1.040 / 255

MAPPS III High-Speed-Programming *applies also for sub spindle, depending on design

8/3/2019 Moriseiki Aerospace En

11/16

NZ Series Facts:| Up to 3 built-in motor turrets (BMT) for

max. 48 direct driven tool stations

| Simultaneous machining with max. 3 turrets

and 3 programmes

| Excellent milling performance up to 3 Y-axes

with the longest strokes in its class (110 mm)

| MAPPS III: simple conversational automatic

programming with 3D interference checkingfunction

NZ Series complete machining with upto 3 turrets each with Y-axis.

MORI SEIKI Aerospace Industry 10 | 11

CNC Multi-Axis Turning Centres

Technical Details NZ1500T3Y3 NZ2000T3Y3

Max. machining diameter mm 320 320

Max. machining length mm 260 260

Max. bar diameter mm 52 65

Axis travel X-/ Z-/ Y-/ B- (spindle 2) mm 210 / 300, 810 / 110 / 920 210 / 300, 810 / 110 / 920

Max. spindle speed min-1 6.000 5.000

Max. rotation of the driven tools min-1 6.000 [12.000] 6.000 [12.000]

[ ] optional

MORI SEIKI NT machines and with this, new

materials such as titanium and inconel have

been predominantly used.

The Advanced Manufacturing Research Centre

in Sheffield works closely with our engineering

department and together they develop new highly

productive production techniques. For the past

few years Sheffield has been manufacturing on

AMRC University in Sheffi eld

Cooperation the application of new materialssuch as titanium or inconel at the highest level.

8/3/2019 Moriseiki Aerospace En

12/16

AutomationThe right solution for all purposes.

| 1 Linear Pallet Pool system for large-variety production | 2 combination of lathes and machining centresfor automated complete machining | 3 Carrier Pallet Pool systems with various configurations available

8/3/2019 Moriseiki Aerospace En

13/16

MORI SEIKI Aerospace Industry 12 | 13

Achieving competent automation solutions to

meet customer demands has been the taskfor MORI SEIKI for years. With an engineering

team, that has a world-wide network of ex-

perience and know-how in diverse industries.

There are complete configured solutions

(CPP) as well as totally individual designed

Automation Free-Style Engineering competence combined with awide range of automation solutions

systems (LPP) available. MORI SEIKI is with

you from the planning, installation andimplementation to the integration of your

network.

LPP CPP

Scale

Number of machines Up to8 units

Up to2 units

Number of workpiece

setup stations

Up to

5 sets

Up to

2 sets

Number of pallet

stations

Up to

99 stations

Up to

29 stations

Number of pallet

shelves2 levels 1 level

Choose to suit your needs:

8/3/2019 Moriseiki Aerospace En

14/16

GERMANYMORI SEIKI Stuttgart

Antoniusstrae 14, 73249 WernauTel. +49 (0) 7153 934 0

MORI SEIKI HamburgMerkurring 63 - 65, 22143 HamburgTel. +49 (0) 40 69 458 0

MORI SEIKI DsseldorfSiemensring 19, 47877 WillichTel. +49 (0) 21 54 88 59 0

MORI SEIKI MnchenFrankfurter Ring 117, 80807 MnchenTel. +49 (0) 89 35 744 0

MORI SEIKI FrankfurtBorsigstrasse 20, 66205 Wiesbaden

Tel. +49 (0) 6122 92 777 0

FRANCEMORI SEIKI FRANCE S.A.S ParisParc du Moulin, 1, Rue du NoyerBP 19326 Roissy en France,95705 Roissy CDG CedexTel. +33 (0) 1 39 94 68 00

MORI SEIKI FRANCE S.A.S Toulouse6, Impasse Lonce Couture31200 ToulouseTel. +33 (0) 5 3425 29 95

MS SYFRAMO S.A.S. Chassieu

81, Avenue du Progrs, 69680 ChassieuTel. +33 (0) 4 78 90 95 95

MS SYFRAMO agence de Vougy40, Rue du Stade, 74130 VougyTel. +33 (0) 4 50 18 03 43

REPMO377, Avenue du Prsident-Wilson

93214 Saint-DenisTel. +33 (0)1 49 46 61 45

SCOMOParc dactivits St-Martin-du-Touch4, Rue Marius Terc, 31300 ToulouseTel. +33 (0)5 61 78 85 85

SEVMORue Eiffel-CP 4007, 44806 Saint-HerblainTel. +33 (0)2 40 92 09 09

ITALYMORI SEIKI ITALIANA S.R.LMilanoVia Riccardo Lombardi N. 10

20153 MilanoTel. +39 02 48 94 921

BENEDETTO RUTIGLIANO S.R.L.S.S. 96 KM 115+75070026 Modugno (BA)Tel. +39 080 5356 802

Essedi S.p.A.Via dell Artigianato, 1,25080 Molinetto di Mazzano (BS)Tel. +39 030 2120 453

FM Macchine S.r.l.Via Tamigi, snc - 65016 Montesilvano (PE)Tel. +39 085 4683 818

H.T.M. S.r.l.Via di Le Prata, 146, 50041 Calenzano (FI)Tel. +39 055 882 6660

Micron S.p.A.Via Enrico Fermi, 7, 35030 Veggiano (PD)Tel. +39 049 900 6611

Moreno Macchine Utensili S.r.l.Via Grecia, 10 - 41100 Modena (MO)

Tel. +39 059 418 611Prisma Macchine Utensili S.p.A.Via Presolana, 920021 Baranzate di Bollate (MI)Tel. +39 02 356 4025

Sirtech S.p.A.Via Casilina Km. 131, 60003030 Piedimonte San Germano (FR)Tel. +39 0776 4020 87

Tecno Control S.r.l.Strada per Carrone, 3010019 Strambino (TO)Tel. +39 0125 637581

Tecnologia ed AutomazioneIndustriale S.r.l.Via Ghisalba, 13 - 20021 Bollate (MI)Tel. +39 02 3830 6184

UKMORI SEIKI (UK) LTD.London202 Bedford AvenueSlough SL1 4RYTel. +44 (0) 870 240 9500

MORI SEIKI Birmingham4060 Lakeside, Solihull Parkway,Birmingham Business Park

BIRMINGHAM B37 7YNTel. +44 (0) 870 240 9500

ContactAlways near by.

MORI SEIKI Technical Centres and Sales and Service partners

8/3/2019 Moriseiki Aerospace En

15/16

Europe-wide reliability. MORI SEIKI supportwith an overall network throughout Europe.Contact your regional partner.

SPAINMORI SEIKI ESPAA S.A.

BarcelonaCalle de la Electronica, Bloque B,Nave 9 Poligono Industrial La Ferreria08110 Montcada I Reixac (Barcelona)Tel. +34 93 575 36 46

Juan Martin, S.L.Isaac peral, 608960 San Just Desvern (Barcelona)Tel. +34 933 715389

LM-Machinery S.L.C amino de Portuexe, 2720018 San SebastianTel. +34 943 331000

CZECH REPUPLICMORI SEIKI GmbH Prague6th floor of building No. 423,Evropska 178, 160 00 Praha 6Tel. +420 224 362 777

Newtech s.r.o.Evropska 423/178, 160 00 Praha 6Tel. +42 02 3309 0451

MORI SEIKI Sales & Service partners

AUSTRIACNC-PROFIMaschinen-Handels GmbHJosef-Jessernigg-Strae 162000 StockerauTel. +43 2266 67740

BELGIUMLandr Machines NVWarandestraat 2, 9240 ZeleTel. +32 2 257 1930

DENMARKC. Henriksen & Co.

Baldersbuen 57, PB2162640 HedehuseneTel. +45 46 590 566

FINLANDNugget OyOrmuspellontie 7, PL12100701 HelsinkiTel. +358 9 350 5380

GREECETechGroup425, Thivon Ave. & 4, Galeriou St,131 21 AthensTel. +30 210 57 85 470

HUNGARYWamatec Hungary Kft.2040 Budars, Gyr u. 2 - BITEPTel. +36 23 503 933

IRELANDLister Machine Tools Ltd.PO Box. 838Bluebell Industrial Estate, Dublin 12Tel. +353 1450 8866

LITHUANIAStevilaMokolai 68460 MarijampoleTel. +370 343 918 01

NETHERLANDSLandr Machines BVLange Dreef 10, 4131 NH VianenTel. +31 3473 29 371

NORWAYBERGSLI METALLMASKINER ASBedriftsveien 64Kjrbekk 3735 SkienTel. +47 35 50 35 00

POLANDAPX Technologie Sp.z.o.o

Al. Jerozolimskie 424A05-800 PruszkwTel. +48 22 759 62 00

PORTUGALJuan Martin LDAJoao Pereira Venancio, Loja 42430 Marinha GrandeTel. +351 244 568610

ROMANIAS.C. Tezmaksan International s.r.l.Calea Victoriei Nr. 85, Bl. 1, Et. 1,Ap. 4, Sector 1, BucharestTel. +40 21 3139313

SLOVAKIANewtech s.r.o.Sturova 5/9, 017 01 Povask BystricaTel. +421 424 340 611

SLOVENIABTS Company D.O.O.Bratislavska 5, SLO-1000 LjubljanaTel. +386 1 5841 400

SWEDENLundwalls ABEA Rosengrens Gata 5 -Box 2105S-42102 Vastra FrlundaTel. +46 31 348 98 00

SWITZERLANDJosef Binkert AGGrabenstrasse 1, CH-8304 WallisellenTel. +41 44 832 55 55

8/3/2019 Moriseiki Aerospace En

16/16

i iki