6
DEFENSE SPECIALTY PRODUCTS ARMTEC ® Combustible Ordnance
A R T I L L E R YTA N K
Combustible cartridge cases are an integral part of modern tank ammunition and provide the high level of performance demanded by today’s tank main armament systems. Armtec® combat proven combustible cartridge cases are the standard on all U.S. 120mm tank ammunition and are the preferred solution for new ammunition under development for current and future tank gun systems worldwide.
Product Description
• Nitrocellulose based molded-fiber combustible cartridge cases
• Post-impregnation or beater additive resin addition process
• Rigid and durable in design and construction
Advantages
• High pressure and high velocity capability without the extraction problems associated with metal cases
• Increased muzzle velocities
• Full spectrum performance from -40°F (-40°C) to 140°F (60°C)
• Capable of withstanding harsh environmental and rough handling conditions
• Compatible with conventional single, double, triple-based and advanced propellants
• Autoloader compatible
• Consistent muzzle velocity, resulting in increased accuracy
• 20-year minimum shelf-life in controlled storage
• Combat proven
• Total round weight reduction and improved logistics system
• Eliminates noxious fumes and clutter in crew compartment
• Advanced case system (ACS) provides improved crew safety over legacy round configurations
ARMTEC ® combustible ordnance products are found in a variety of artillery applications, ranging from igniter tubes for center core ignition bag charges to the latest state-of-the-art modular propelling charge systems such as the U.S. Modular Artillery Charge System (MACS). These combus-tible ordnance products are vital to achieving the high performance demanded in current and future artillery systems.
Modular Ar ti l lery Charge System (MACS)Product Description
• Bi-modular system consisting of the M231 charge, used for low zone firings (charge 1 and 2) and the M232A1 (charge 3 through 5) for high zone firings
• A maximum of five M232A1 charges can be used in conventional 39 caliber guns with charge 6 reserved for larger chamber guns
• Combustible case sets are a three-piece design consisting of a case body, center core igniter tube and end cap
• Charges are color coded for identification; surface design features also allow the charges to be differentiated by touch
• Charges incorporate a surface protectant and barrel wear reducing additives
Advantages
• Greatly reduced cost and logistics chain; charge system is additive, eliminating the need to dispose of unused charges
• Compatible with both current and new 155mm howitzer systems, including M198 towed, M109A5 and A6 self-propelled, the M777 lightweight towed howitzer, and the NLOS-C Future Combat System
• Increased safety during transport and loading
• Extended range
• Improved barrel life
• Increased rates of fire
• Most Insensitive Munitions (IM) compliant artillery charge available today
• Autoloader compatible
DEFENSESPECIALTY PRODUCTS
A R M T E C®
Combustible Ordnance
New Product Development ISO Certified
Esterline Defense Technologies is the acknowledged leader in combustible
ordnance and countermeasure research, development and manufacture.
UNITED STATES
California Operations andExecutive Offices
85-901 Avenue 53Coachella, California 92236Ph: 760-398-0143Fx: 760-398-3896
Arkansas OperationsEast Camden, AR
North Carolina OperationsLillington, NC
Tennessee OperationsMilan, TN
UNITED KINGDOM
Wallop Defence SystemsHampshire
09/10
ARMTEC ® Combustible Ordnance —
The Preferred Solution
Our Armtec® combustible ordnance products are used in a
wide variety of military applications and offer significant
advantages over technologies such as metal cases for tank
ammunition, bag charges for artillery and celluloid containers
or bag charges for mortar applications.
Research & Development
Esterline Defense Technologies has established an exten-
sive R&D capability dedicated to development and support
of our combustible ordnance products. In addition, we
have the in-house capability to design and/or customize
combustible ordnance products to meet customer’s needs,
from design and development through prototyping and full
scale production.
EDT is also positioning for growth with a series of product
innovations and new product lines emerging from a growing
R&D pipeline. Accordingly, to provide the strategic capability
that can aggressively pursue and capture these growth
opportunities, new science and engineering capabilities
(people, facilities) have been added to the R&D team,
focusing on chemistry and process engineering.
Faci l it ies & Services
We have the necessary facilities to perform a wide range of research and development activities. These capabilities include:
• Engineering services encompassing product design, process development and material studies
• Prototype manufacture
• Physical testing laboratory
• Analytical and formulation chemistry capability
• Full service pilot plant
• Mechanical applications laboratory
Esterline Defense Technologies Provides:
• Flexible production volumes
• Unique shape and design features to maximize volume
• Complete system design to replace existing bag and celluloid systems
• Full customer service including technical assistance and quality assurance
• Payloads for training ammunition, providing visible and/or IR signatures
• Chemistry solutions for defense products
M O R TA R
w w w . e s t e r l i n e . c o m
Felted f iber propellant containers (increments) meet the rigorous requirements of current and future mortar systems. These combat proven increments are the standard on all U.S. mortar ammunition and are the preferred propellant container solution for new ammunition under development worldwide.
Product Description
• Nitrocellulose based felted-fiber containers (increments)
• Silicone impregnated for moisture resistance
• Rigid and durable in design and construction
• Available for all calibers including 60mm, 81mm and 120mm
Advantages
• Elimination of hangfires associated with in-bore residue
• Moisture resistant
• Proven performance in a wide range of climatic conditions -40°F (-40°C) to 140°F (60°C)
• Autoloader compatible
• Consistent muzzle velocity, resulting in increased accuracy
• Extended shelf-life
• Combat proven
A R T I L L E R YTA N K
Combustible cartridge cases are an integral part of modern tank ammunition and provide the high level of performance demanded by today’s tank main armament systems. Armtec® combat proven combustible cartridge cases are the standard on all U.S. 120mm tank ammunition and are the preferred solution for new ammunition under development for current and future tank gun systems worldwide.
Product Description
• Nitrocellulose based molded-fiber combustible cartridge cases
• Post-impregnation or beater additive resin addition process
• Rigid and durable in design and construction
Advantages
• High pressure and high velocity capability without the extraction problems associated with metal cases
• Increased muzzle velocities
• Full spectrum performance from -40°F (-40°C) to 140°F (60°C)
• Capable of withstanding harsh environmental and rough handling conditions
• Compatible with conventional single, double, triple-based and advanced propellants
• Autoloader compatible
• Consistent muzzle velocity, resulting in increased accuracy
• 20-year minimum shelf-life in controlled storage
• Combat proven
• Total round weight reduction and improved logistics system
• Eliminates noxious fumes and clutter in crew compartment
• Advanced case system (ACS) provides improved crew safety over legacy round configurations
ARMTEC ® combustible ordnance products are found in a variety of artillery applications, ranging from igniter tubes for center core ignition bag charges to the latest state-of-the-art modular propelling charge systems such as the U.S. Modular Artillery Charge System (MACS). These combus-tible ordnance products are vital to achieving the high performance demanded in current and future artillery systems.
Modular Ar ti l lery Charge System (MACS)Product Description
• Bi-modular system consisting of the M231 charge, used for low zone firings (charge 1 and 2) and the M232A1 (charge 3 through 5) for high zone firings
• A maximum of five M232A1 charges can be used in conventional 39 caliber guns with charge 6 reserved for larger chamber guns
• Combustible case sets are a three-piece design consisting of a case body, center core igniter tube and end cap
• Charges are color coded for identification; surface design features also allow the charges to be differentiated by touch
• Charges incorporate a surface protectant and barrel wear reducing additives
Advantages
• Greatly reduced cost and logistics chain; charge system is additive, eliminating the need to dispose of unused charges
• Compatible with both current and new 155mm howitzer systems, including M198 towed, M109A5 and A6 self-propelled, the M777 lightweight towed howitzer, and the NLOS-C Future Combat System
• Increased safety during transport and loading
• Extended range
• Improved barrel life
• Increased rates of fire
• Most Insensitive Munitions (IM) compliant artillery charge available today
• Autoloader compatible
DEFENSESPECIALTY PRODUCTS
A R M T E C®
Combustible Ordnance
New Product Development ISO Certified
Esterline Defense Technologies is the acknowledged leader in combustible
ordnance and countermeasure research, development and manufacture.
UNITED STATES
California Operations andExecutive Offices
85-901 Avenue 53Coachella, California 92236Ph: 760-398-0143Fx: 760-398-3896
Arkansas OperationsEast Camden, AR
North Carolina OperationsLillington, NC
Tennessee OperationsMilan, TN
UNITED KINGDOM
Wallop Defence SystemsHampshire
09/10
ARMTEC ® Combustible Ordnance —
The Preferred Solution
Our Armtec® combustible ordnance products are used in a
wide variety of military applications and offer significant
advantages over technologies such as metal cases for tank
ammunition, bag charges for artillery and celluloid containers
or bag charges for mortar applications.
Research & Development
Esterline Defense Technologies has established an exten-
sive R&D capability dedicated to development and support
of our combustible ordnance products. In addition, we
have the in-house capability to design and/or customize
combustible ordnance products to meet customer’s needs,
from design and development through prototyping and full
scale production.
EDT is also positioning for growth with a series of product
innovations and new product lines emerging from a growing
R&D pipeline. Accordingly, to provide the strategic capability
that can aggressively pursue and capture these growth
opportunities, new science and engineering capabilities
(people, facilities) have been added to the R&D team,
focusing on chemistry and process engineering.
Faci l it ies & Services
We have the necessary facilities to perform a wide range of research and development activities. These capabilities include:
• Engineering services encompassing product design, process development and material studies
• Prototype manufacture
• Physical testing laboratory
• Analytical and formulation chemistry capability
• Full service pilot plant
• Mechanical applications laboratory
Esterline Defense Technologies Provides:
• Flexible production volumes
• Unique shape and design features to maximize volume
• Complete system design to replace existing bag and celluloid systems
• Full customer service including technical assistance and quality assurance
• Payloads for training ammunition, providing visible and/or IR signatures
• Chemistry solutions for defense products
M O R TA R
w w w . e s t e r l i n e . c o m
Felted f iber propellant containers (increments) meet the rigorous requirements of current and future mortar systems. These combat proven increments are the standard on all U.S. mortar ammunition and are the preferred propellant container solution for new ammunition under development worldwide.
Product Description
• Nitrocellulose based felted-fiber containers (increments)
• Silicone impregnated for moisture resistance
• Rigid and durable in design and construction
• Available for all calibers including 60mm, 81mm and 120mm
Advantages
• Elimination of hangfires associated with in-bore residue
• Moisture resistant
• Proven performance in a wide range of climatic conditions -40°F (-40°C) to 140°F (60°C)
• Autoloader compatible
• Consistent muzzle velocity, resulting in increased accuracy
• Extended shelf-life
• Combat proven
A R T I L L E R YTA N K
Combustible cartridge cases are an integral part of modern tank ammunition and provide the high level of performance demanded by today’s tank main armament systems. Armtec® combat proven combustible cartridge cases are the standard on all U.S. 120mm tank ammunition and are the preferred solution for new ammunition under development for current and future tank gun systems worldwide.
Product Description
• Nitrocellulose based molded-fiber combustible cartridge cases
• Post-impregnation or beater additive resin addition process
• Rigid and durable in design and construction
Advantages
• High pressure and high velocity capability without the extraction problems associated with metal cases
• Increased muzzle velocities
• Full spectrum performance from -40°F (-40°C) to 140°F (60°C)
• Capable of withstanding harsh environmental and rough handling conditions
• Compatible with conventional single, double, triple-based and advanced propellants
• Autoloader compatible
• Consistent muzzle velocity, resulting in increased accuracy
• 20-year minimum shelf-life in controlled storage
• Combat proven
• Total round weight reduction and improved logistics system
• Eliminates noxious fumes and clutter in crew compartment
• Advanced case system (ACS) provides improved crew safety over legacy round configurations
ARMTEC ® combustible ordnance products are found in a variety of artillery applications, ranging from igniter tubes for center core ignition bag charges to the latest state-of-the-art modular propelling charge systems such as the U.S. Modular Artillery Charge System (MACS). These combus-tible ordnance products are vital to achieving the high performance demanded in current and future artillery systems.
Modular Ar ti l lery Charge System (MACS)Product Description
• Bi-modular system consisting of the M231 charge, used for low zone firings (charge 1 and 2) and the M232A1 (charge 3 through 5) for high zone firings
• A maximum of five M232A1 charges can be used in conventional 39 caliber guns with charge 6 reserved for larger chamber guns
• Combustible case sets are a three-piece design consisting of a case body, center core igniter tube and end cap
• Charges are color coded for identification; surface design features also allow the charges to be differentiated by touch
• Charges incorporate a surface protectant and barrel wear reducing additives
Advantages
• Greatly reduced cost and logistics chain; charge system is additive, eliminating the need to dispose of unused charges
• Compatible with both current and new 155mm howitzer systems, including M198 towed, M109A5 and A6 self-propelled, the M777 lightweight towed howitzer, and the NLOS-C Future Combat System
• Increased safety during transport and loading
• Extended range
• Improved barrel life
• Increased rates of fire
• Most Insensitive Munitions (IM) compliant artillery charge available today
• Autoloader compatible
DEFENSESPECIALTY PRODUCTS
A R M T E C®
Combustible Ordnance
New Product Development ISO Certified
Esterline Defense Technologies is the acknowledged leader in combustible
ordnance and countermeasure research, development and manufacture.
UNITED STATES
California Operations andExecutive Offices
85-901 Avenue 53Coachella, California 92236Ph: 760-398-0143Fx: 760-398-3896
Arkansas OperationsEast Camden, AR
North Carolina OperationsLillington, NC
Tennessee OperationsMilan, TN
UNITED KINGDOM
Wallop Defence SystemsHampshire
09/10
ARMTEC ® Combustible Ordnance —
The Preferred Solution
Our Armtec® combustible ordnance products are used in a
wide variety of military applications and offer significant
advantages over technologies such as metal cases for tank
ammunition, bag charges for artillery and celluloid containers
or bag charges for mortar applications.
Research & Development
Esterline Defense Technologies has established an exten-
sive R&D capability dedicated to development and support
of our combustible ordnance products. In addition, we
have the in-house capability to design and/or customize
combustible ordnance products to meet customer’s needs,
from design and development through prototyping and full
scale production.
EDT is also positioning for growth with a series of product
innovations and new product lines emerging from a growing
R&D pipeline. Accordingly, to provide the strategic capability
that can aggressively pursue and capture these growth
opportunities, new science and engineering capabilities
(people, facilities) have been added to the R&D team,
focusing on chemistry and process engineering.
Faci l it ies & Services
We have the necessary facilities to perform a wide range of research and development activities. These capabilities include:
• Engineering services encompassing product design, process development and material studies
• Prototype manufacture
• Physical testing laboratory
• Analytical and formulation chemistry capability
• Full service pilot plant
• Mechanical applications laboratory
Esterline Defense Technologies Provides:
• Flexible production volumes
• Unique shape and design features to maximize volume
• Complete system design to replace existing bag and celluloid systems
• Full customer service including technical assistance and quality assurance
• Payloads for training ammunition, providing visible and/or IR signatures
• Chemistry solutions for defense products
M O R TA R
w w w . e s t e r l i n e . c o m
Felted f iber propellant containers (increments) meet the rigorous requirements of current and future mortar systems. These combat proven increments are the standard on all U.S. mortar ammunition and are the preferred propellant container solution for new ammunition under development worldwide.
Product Description
• Nitrocellulose based felted-fiber containers (increments)
• Silicone impregnated for moisture resistance
• Rigid and durable in design and construction
• Available for all calibers including 60mm, 81mm and 120mm
Advantages
• Elimination of hangfires associated with in-bore residue
• Moisture resistant
• Proven performance in a wide range of climatic conditions -40°F (-40°C) to 140°F (60°C)
• Autoloader compatible
• Consistent muzzle velocity, resulting in increased accuracy
• Extended shelf-life
• Combat proven
A R T I L L E R YTA N K
Combustible cartridge cases are an integral part of modern tank ammunition and provide the high level of performance demanded by today’s tank main armament systems. Armtec® combat proven combustible cartridge cases are the standard on all U.S. 120mm tank ammunition and are the preferred solution for new ammunition under development for current and future tank gun systems worldwide.
Product Description
• Nitrocellulose based molded-fiber combustible cartridge cases
• Post-impregnation or beater additive resin addition process
• Rigid and durable in design and construction
Advantages
• High pressure and high velocity capability without the extraction problems associated with metal cases
• Increased muzzle velocities
• Full spectrum performance from -40°F (-40°C) to 140°F (60°C)
• Capable of withstanding harsh environmental and rough handling conditions
• Compatible with conventional single, double, triple-based and advanced propellants
• Autoloader compatible
• Consistent muzzle velocity, resulting in increased accuracy
• 20-year minimum shelf-life in controlled storage
• Combat proven
• Total round weight reduction and improved logistics system
• Eliminates noxious fumes and clutter in crew compartment
• Advanced case system (ACS) provides improved crew safety over legacy round configurations
ARMTEC ® combustible ordnance products are found in a variety of artillery applications, ranging from igniter tubes for center core ignition bag charges to the latest state-of-the-art modular propelling charge systems such as the U.S. Modular Artillery Charge System (MACS). These combus-tible ordnance products are vital to achieving the high performance demanded in current and future artillery systems.
Modular Ar ti l lery Charge System (MACS)Product Description
• Bi-modular system consisting of the M231 charge, used for low zone firings (charge 1 and 2) and the M232A1 (charge 3 through 5) for high zone firings
• A maximum of five M232A1 charges can be used in conventional 39 caliber guns with charge 6 reserved for larger chamber guns
• Combustible case sets are a three-piece design consisting of a case body, center core igniter tube and end cap
• Charges are color coded for identification; surface design features also allow the charges to be differentiated by touch
• Charges incorporate a surface protectant and barrel wear reducing additives
Advantages
• Greatly reduced cost and logistics chain; charge system is additive, eliminating the need to dispose of unused charges
• Compatible with both current and new 155mm howitzer systems, including M198 towed, M109A5 and A6 self-propelled, the M777 lightweight towed howitzer, and the NLOS-C Future Combat System
• Increased safety during transport and loading
• Extended range
• Improved barrel life
• Increased rates of fire
• Most Insensitive Munitions (IM) compliant artillery charge available today
• Autoloader compatible
DEFENSESPECIALTY PRODUCTS
A R M T E C®
Combustible Ordnance
New Product Development ISO Certified
Esterline Defense Technologies is the acknowledged leader in combustible
ordnance and countermeasure research, development and manufacture.
UNITED STATES
California Operations andExecutive Offices
85-901 Avenue 53Coachella, California 92236Ph: 760-398-0143Fx: 760-398-3896
Arkansas OperationsEast Camden, AR
North Carolina OperationsLillington, NC
Tennessee OperationsMilan, TN
UNITED KINGDOM
Wallop Defence SystemsHampshire
09/10
ARMTEC ® Combustible Ordnance —
The Preferred Solution
Our Armtec® combustible ordnance products are used in a
wide variety of military applications and offer significant
advantages over technologies such as metal cases for tank
ammunition, bag charges for artillery and celluloid containers
or bag charges for mortar applications.
Research & Development
Esterline Defense Technologies has established an exten-
sive R&D capability dedicated to development and support
of our combustible ordnance products. In addition, we
have the in-house capability to design and/or customize
combustible ordnance products to meet customer’s needs,
from design and development through prototyping and full
scale production.
EDT is also positioning for growth with a series of product
innovations and new product lines emerging from a growing
R&D pipeline. Accordingly, to provide the strategic capability
that can aggressively pursue and capture these growth
opportunities, new science and engineering capabilities
(people, facilities) have been added to the R&D team,
focusing on chemistry and process engineering.
Faci l it ies & Services
We have the necessary facilities to perform a wide range of research and development activities. These capabilities include:
• Engineering services encompassing product design, process development and material studies
• Prototype manufacture
• Physical testing laboratory
• Analytical and formulation chemistry capability
• Full service pilot plant
• Mechanical applications laboratory
Esterline Defense Technologies Provides:
• Flexible production volumes
• Unique shape and design features to maximize volume
• Complete system design to replace existing bag and celluloid systems
• Full customer service including technical assistance and quality assurance
• Payloads for training ammunition, providing visible and/or IR signatures
• Chemistry solutions for defense products
M O R TA R
w w w . e s t e r l i n e . c o m
Felted f iber propellant containers (increments) meet the rigorous requirements of current and future mortar systems. These combat proven increments are the standard on all U.S. mortar ammunition and are the preferred propellant container solution for new ammunition under development worldwide.
Product Description
• Nitrocellulose based felted-fiber containers (increments)
• Silicone impregnated for moisture resistance
• Rigid and durable in design and construction
• Available for all calibers including 60mm, 81mm and 120mm
Advantages
• Elimination of hangfires associated with in-bore residue
• Moisture resistant
• Proven performance in a wide range of climatic conditions -40°F (-40°C) to 140°F (60°C)
• Autoloader compatible
• Consistent muzzle velocity, resulting in increased accuracy
• Extended shelf-life
• Combat proven
A R T I L L E R YTA N K
Combustible cartridge cases are an integral part of modern tank ammunition and provide the high level of performance demanded by today’s tank main armament systems. Armtec® combat proven combustible cartridge cases are the standard on all U.S. 120mm tank ammunition and are the preferred solution for new ammunition under development for current and future tank gun systems worldwide.
Product Description
• Nitrocellulose based molded-fiber combustible cartridge cases
• Post-impregnation or beater additive resin addition process
• Rigid and durable in design and construction
Advantages
• High pressure and high velocity capability without the extraction problems associated with metal cases
• Increased muzzle velocities
• Full spectrum performance from -40°F (-40°C) to 140°F (60°C)
• Capable of withstanding harsh environmental and rough handling conditions
• Compatible with conventional single, double, triple-based and advanced propellants
• Autoloader compatible
• Consistent muzzle velocity, resulting in increased accuracy
• 20-year minimum shelf-life in controlled storage
• Combat proven
• Total round weight reduction and improved logistics system
• Eliminates noxious fumes and clutter in crew compartment
• Advanced case system (ACS) provides improved crew safety over legacy round configurations
ARMTEC ® combustible ordnance products are found in a variety of artillery applications, ranging from igniter tubes for center core ignition bag charges to the latest state-of-the-art modular propelling charge systems such as the U.S. Modular Artillery Charge System (MACS). These combus-tible ordnance products are vital to achieving the high performance demanded in current and future artillery systems.
Modular Ar ti l lery Charge System (MACS)Product Description
• Bi-modular system consisting of the M231 charge, used for low zone firings (charge 1 and 2) and the M232A1 (charge 3 through 5) for high zone firings
• A maximum of five M232A1 charges can be used in conventional 39 caliber guns with charge 6 reserved for larger chamber guns
• Combustible case sets are a three-piece design consisting of a case body, center core igniter tube and end cap
• Charges are color coded for identification; surface design features also allow the charges to be differentiated by touch
• Charges incorporate a surface protectant and barrel wear reducing additives
Advantages
• Greatly reduced cost and logistics chain; charge system is additive, eliminating the need to dispose of unused charges
• Compatible with both current and new 155mm howitzer systems, including M198 towed, M109A5 and A6 self-propelled, the M777 lightweight towed howitzer, and the NLOS-C Future Combat System
• Increased safety during transport and loading
• Extended range
• Improved barrel life
• Increased rates of fire
• Most Insensitive Munitions (IM) compliant artillery charge available today
• Autoloader compatible
DEFENSESPECIALTY PRODUCTS
A R M T E C®
Combustible Ordnance
New Product Development ISO Certified
Esterline Defense Technologies is the acknowledged leader in combustible
ordnance and countermeasure research, development and manufacture.
UNITED STATES
California Operations andExecutive Offices
85-901 Avenue 53Coachella, California 92236Ph: 760-398-0143Fx: 760-398-3896
Arkansas OperationsEast Camden, AR
North Carolina OperationsLillington, NC
Tennessee OperationsMilan, TN
UNITED KINGDOM
Wallop Defence SystemsHampshire
09/10
ARMTEC ® Combustible Ordnance —
The Preferred Solution
Our Armtec® combustible ordnance products are used in a
wide variety of military applications and offer significant
advantages over technologies such as metal cases for tank
ammunition, bag charges for artillery and celluloid containers
or bag charges for mortar applications.
Research & Development
Esterline Defense Technologies has established an exten-
sive R&D capability dedicated to development and support
of our combustible ordnance products. In addition, we
have the in-house capability to design and/or customize
combustible ordnance products to meet customer’s needs,
from design and development through prototyping and full
scale production.
EDT is also positioning for growth with a series of product
innovations and new product lines emerging from a growing
R&D pipeline. Accordingly, to provide the strategic capability
that can aggressively pursue and capture these growth
opportunities, new science and engineering capabilities
(people, facilities) have been added to the R&D team,
focusing on chemistry and process engineering.
Faci l it ies & Services
We have the necessary facilities to perform a wide range of research and development activities. These capabilities include:
• Engineering services encompassing product design, process development and material studies
• Prototype manufacture
• Physical testing laboratory
• Analytical and formulation chemistry capability
• Full service pilot plant
• Mechanical applications laboratory
Esterline Defense Technologies Provides:
• Flexible production volumes
• Unique shape and design features to maximize volume
• Complete system design to replace existing bag and celluloid systems
• Full customer service including technical assistance and quality assurance
• Payloads for training ammunition, providing visible and/or IR signatures
• Chemistry solutions for defense products
M O R TA R
w w w . e s t e r l i n e . c o m
Felted f iber propellant containers (increments) meet the rigorous requirements of current and future mortar systems. These combat proven increments are the standard on all U.S. mortar ammunition and are the preferred propellant container solution for new ammunition under development worldwide.
Product Description
• Nitrocellulose based felted-fiber containers (increments)
• Silicone impregnated for moisture resistance
• Rigid and durable in design and construction
• Available for all calibers including 60mm, 81mm and 120mm
Advantages
• Elimination of hangfires associated with in-bore residue
• Moisture resistant
• Proven performance in a wide range of climatic conditions -40°F (-40°C) to 140°F (60°C)
• Autoloader compatible
• Consistent muzzle velocity, resulting in increased accuracy
• Extended shelf-life
• Combat proven
A R T I L L E R YTA N K
Combustible cartridge cases are an integral part of modern tank ammunition and provide the high level of performance demanded by today’s tank main armament systems. Armtec® combat proven combustible cartridge cases are the standard on all U.S. 120mm tank ammunition and are the preferred solution for new ammunition under development for current and future tank gun systems worldwide.
Product Description
• Nitrocellulose based molded-fiber combustible cartridge cases
• Post-impregnation or beater additive resin addition process
• Rigid and durable in design and construction
Advantages
• High pressure and high velocity capability without the extraction problems associated with metal cases
• Increased muzzle velocities
• Full spectrum performance from -40°F (-40°C) to 140°F (60°C)
• Capable of withstanding harsh environmental and rough handling conditions
• Compatible with conventional single, double, triple-based and advanced propellants
• Autoloader compatible
• Consistent muzzle velocity, resulting in increased accuracy
• 20-year minimum shelf-life in controlled storage
• Combat proven
• Total round weight reduction and improved logistics system
• Eliminates noxious fumes and clutter in crew compartment
• Advanced case system (ACS) provides improved crew safety over legacy round configurations
ARMTEC ® combustible ordnance products are found in a variety of artillery applications, ranging from igniter tubes for center core ignition bag charges to the latest state-of-the-art modular propelling charge systems such as the U.S. Modular Artillery Charge System (MACS). These combus-tible ordnance products are vital to achieving the high performance demanded in current and future artillery systems.
Modular Ar ti l lery Charge System (MACS)Product Description
• Bi-modular system consisting of the M231 charge, used for low zone firings (charge 1 and 2) and the M232A1 (charge 3 through 5) for high zone firings
• A maximum of five M232A1 charges can be used in conventional 39 caliber guns with charge 6 reserved for larger chamber guns
• Combustible case sets are a three-piece design consisting of a case body, center core igniter tube and end cap
• Charges are color coded for identification; surface design features also allow the charges to be differentiated by touch
• Charges incorporate a surface protectant and barrel wear reducing additives
Advantages
• Greatly reduced cost and logistics chain; charge system is additive, eliminating the need to dispose of unused charges
• Compatible with both current and new 155mm howitzer systems, including M198 towed, M109A5 and A6 self-propelled, the M777 lightweight towed howitzer, and the NLOS-C Future Combat System
• Increased safety during transport and loading
• Extended range
• Improved barrel life
• Increased rates of fire
• Most Insensitive Munitions (IM) compliant artillery charge available today
• Autoloader compatible
DEFENSESPECIALTY PRODUCTS
A R M T E C®
Combustible Ordnance
New Product Development ISO Certified
Esterline Defense Technologies is the acknowledged leader in combustible
ordnance and countermeasure research, development and manufacture.
UNITED STATES
California Operations andExecutive Offices
85-901 Avenue 53Coachella, California 92236Ph: 760-398-0143Fx: 760-398-3896
Arkansas OperationsEast Camden, AR
North Carolina OperationsLillington, NC
Tennessee OperationsMilan, TN
UNITED KINGDOM
Wallop Defence SystemsHampshire
09/10
ARMTEC ® Combustible Ordnance —
The Preferred Solution
Our Armtec® combustible ordnance products are used in a
wide variety of military applications and offer significant
advantages over technologies such as metal cases for tank
ammunition, bag charges for artillery and celluloid containers
or bag charges for mortar applications.
Research & Development
Esterline Defense Technologies has established an exten-
sive R&D capability dedicated to development and support
of our combustible ordnance products. In addition, we
have the in-house capability to design and/or customize
combustible ordnance products to meet customer’s needs,
from design and development through prototyping and full
scale production.
EDT is also positioning for growth with a series of product
innovations and new product lines emerging from a growing
R&D pipeline. Accordingly, to provide the strategic capability
that can aggressively pursue and capture these growth
opportunities, new science and engineering capabilities
(people, facilities) have been added to the R&D team,
focusing on chemistry and process engineering.
Faci l it ies & Services
We have the necessary facilities to perform a wide range of research and development activities. These capabilities include:
• Engineering services encompassing product design, process development and material studies
• Prototype manufacture
• Physical testing laboratory
• Analytical and formulation chemistry capability
• Full service pilot plant
• Mechanical applications laboratory
Esterline Defense Technologies Provides:
• Flexible production volumes
• Unique shape and design features to maximize volume
• Complete system design to replace existing bag and celluloid systems
• Full customer service including technical assistance and quality assurance
• Payloads for training ammunition, providing visible and/or IR signatures
• Chemistry solutions for defense products
M O R TA R
w w w . e s t e r l i n e . c o m
Felted f iber propellant containers (increments) meet the rigorous requirements of current and future mortar systems. These combat proven increments are the standard on all U.S. mortar ammunition and are the preferred propellant container solution for new ammunition under development worldwide.
Product Description
• Nitrocellulose based felted-fiber containers (increments)
• Silicone impregnated for moisture resistance
• Rigid and durable in design and construction
• Available for all calibers including 60mm, 81mm and 120mm
Advantages
• Elimination of hangfires associated with in-bore residue
• Moisture resistant
• Proven performance in a wide range of climatic conditions -40°F (-40°C) to 140°F (60°C)
• Autoloader compatible
• Consistent muzzle velocity, resulting in increased accuracy
• Extended shelf-life
• Combat proven
