Motion Control
390 www.thorlabs.com
Single Axis Stages
Multi-Axis Stages
Flexure Stage Accessories
MotorizedMirror Mounts
Rotation Stages
Drive Electronics& Auto-Alignment
Actuators & Adjusters
Brief Tutorials
3/16"-100 Ultrafine Hex Adjuster
Thread 0.26" (6.5mm) Depth
5/64" Hex
0.38"(10mm)
Ø0.41"(Ø10mm)
Ø0.13" Ball
Ø0.290"(Ø7.4mm)
Ø0.33"(Ø8mm)
Ø0.03"(0.76mm)
+0.000"–0.001"
L2 = 0.40" F19SSN1
L2 = 0.53" F19SSN2
The 3/16"-100 TPI adjuster screws are especially challenging tomanufacture given that the thread depth (peak to valley) is just0.006". We have developed a manufacturing process that ensurestolerances better than a class 3 fit. A removable knob and threadedbushing are sold separately.
Ø0.125" Ball
Removable Nut7/16" Hex
#2-56 Locking Screw
5/16"-32 Thread
0.38"(9.5mm) 0.45"
(11mm)
0.10"(2.6mm)3/8"
Hex
3/16"-100 Ultrafine Adjustment Screws
ITEM# $ £ € RMB DESCRIPTION LENGTH
F19SS038 $ 6.30 £ 4.00 € 5,90 ¥ 60.20 Adjuster Screw 3/16"-100 L1 = 3/8"F19SS050 $ 6.80 £ 4.30 € 6,30 ¥ 64.90 Adjuster Screw 3/16"-100 L1 = 1/2"F19SS075 $ 7.90 £ 5.00 € 7,30 ¥ 75.40 Adjuster Screw 3/16"-100 L1 = 3/4"F19SS100 $ 8.90 £ 5.60 € 8,30 ¥ 85.00 Adjuster Screw 3/16"-100 L1 = 1"F19SS125 $ 10.50 £ 6.60 € 9,80 ¥ 100.30 Adjuster Screw 3/16"-100 L1 = 1 1/4"F19SS150 $ 12.10 £ 7.60 € 11,30 ¥ 115.60 Adjuster Screw 3/16"-100 L1 = 1 1/2"F19SS200 $ 13.70 £ 8.60 € 12,70 ¥ 130.80 Adjuster Screw 3/16"-100 L1 = 2"F19SSN1 $ 6.30 £ 4.00 € 5,90 ¥ 60.20 Threaded Bushing 3/16"-100 L2 = 0.40"F19SSN2 $ 6.30 £ 4.00 € 5,90 ¥ 60.20 Threaded Bushing 3/16"-100 L2 = 0.53"F19SSK1 $ 4.70 £ 3.00 € 4,40 ¥ 44.90 Removable Knob 3/16"-100 0.38"74580 $ 26.80 £ 16.90 € 24,90 ¥ 255.90 3/16"-100 Tap –N100B2 $ 8.90 £ 5.60 € 8,30 ¥ 85.00 Threaded Bushing 3/16"-100 0.34"
See mechanical drawing above for details on this series of product.
ITEM# $ £ € RMB DESCRIPTION
UFS075 $ 12.60 £ 7.90 € 11,70 ¥ 120.30 3/16"-100 Threaded Screw, 3/4" LongUFS100 $ 14.70 £ 9.30 € 13,70 ¥ 140.40 3/16"-100 Threaded Screw, 1" LongN100L5 $ 10.40 £ 6.60 € 9,70 ¥ 99.30 3/16"-100 Adjuster Nut
Our 3/16"-100 Ultrafine Adjustment Screws are a convenient drop-in replacement for our F19SS-series hex adjusters. The non-slipknurled Delrin knob improves adjustment sensitivity. Theconvenient brass sleeve, complete with a removable nut, is precision-machined for a fit 30% better than the tightest industry standard(Class 3 Fit). The 3/8" hex head adjuster nut contains a nylon-tipped setscrew in the side of the head to lock the adjuster to thescrew without causing damage to the threads.
F19SS Screws
F19SSN2
F19SSK1
F19SSN1
UFS100
UFS075
N100L5
M3-0.25, 3/16"-100,1/4"-80
Plus More
See Page 918
Custom Taps
15 ActuatorsAdjusters 383-395.qxd.P 7/12/07 11:39 AM Page 390