652
Motion technologies ▶ TIP-ON for doors
Catalogue 2016/2017 • KA-120
Mot
ion
tech
nolo
gies
Handle-less furniture is becoming more and more popular in the home. With TIP-ON, we offer a mechanical opening support system for handle-less furniture fronts. This enables your customers to open and close handle-less furniture fronts easily and effortlessly. TIP-ON can be used in the kitchen as well as in all other living areas.
You will always find the right TIP-ON unit for doors thanks to the wide range of colours and adapters. You can choose between the short and long version of TIP-ON, for drilling or with an adapter plate depending on the application. The door gap adjustment feature is integrated in all models.
Easy to open with just a touch
High quality down to the smallest detail
Handle-less doors can be opened easily with TIP-ON – a light touch is all that’s needed
The door then opens at an angle that is comfortable for the furniture user
The TIP-ON unit can be attached to the cabinet front edge
The TIP-ON unit can also be at-tached to the cabinet interior using horizontal adapter plates
The TIP-ON unit can also be at-tached to the cabinet interior using cruciform adapter plates
The catch plate is the counterpart to TIP-ON. There are two variants, self-adhesive, or a version that screws to the door
Opening comfort for handle-less fronts
The door gap can easily be set using the ejector
With three colour variants, TIP-ON can be optimally adjusted to the cabinet interior
653
Motion technologiesTIP-ON for doors ◀Overview ◀◀
Catalogue 2016/2017 • KA-120
▶▶ TIP-ON 956xTIP-ON 956. – short version with magnet 654TIP-ON 956A – long version with magnet 654TIP-ON 956A – long version with bumper 654
▶▶ AccessoriesInline adapter plates 655Cruciform adapter plates 655
▶▶ Assembly, removal and adjustmentAssembly 656Adjustment 656
PictographItem Available Upon Request
Accessories
General Information
TIP-ON for doors
Chipboard screw fixing
System screw fixing
Planning
Assembly, removal and adjustment
Mot
ion
tech
nolo
gies
Symbolic image
Symbolic image
Symbolic image
654
Motion technologies ▶ TIP-ON for doors▶▶ TIP-ON 956x
Catalogue 2016/2017 • KA-120
TIP-ON 956. – short version with magnet
Order informationColour Part no.SW | TS | R7036 956.1004 Composed of:1 x TIP-ON 956. – short version with magnet1 x Glue-on catch plate1 x Screw-on catch plateSW Silk whiteTS Terra blackR7036 RAL 7036 platinum grey
PlanningFront gap
Glue-on catch plate Screw-on catch plate
TIP-ON 956A – long version with magnet
Order informationColour Part no.SW | TS | R7036 956A1004 Composed of:1 x TIP-ON 956A – long version with magnet1 x Glue-on catch plate1 x Screw-on catch plateSW Silk whiteTS Terra blackR7036 RAL 7036 platinum grey
PlanningFront gap
Glue-on catch plate Screw-on catch plate
TIP-ON 956A – long version with bumper
Order informationColour Part no.SW | TS | R7036 956A1006 Composed of:1 x TIP-ON 956A – long version with bumperNo catch plate needed (we recommend using a catch plate for very soft surfaces)SW Silk whiteTS Terra blackR7036 RAL 7036 platinum grey
PlanningFront gap
Page instructionsOverview – TIP-ON for doors 653Accessories – straight adapter plates 655Accessories – cruciform adapter plates 655Assembly position and number required 656Assembly, removal and adjustment 656
AssemblyDrilling template for BLUMOTION/TIP-ON 744Positioning template for catch plate 766PRO-CENTER 692
Mot
ion
tech
nolo
gies
FA Front overlay FA Front overlay* 3 mm offset installation
FA Front overlay FA Front overlay* 3 mm offset installation
- For overlay doors (up to approx. 1300 mm height)
- For use with unsprung Blum hinges
- For drilling or in com-bination with adapter plates
- Output path approx. 17 mm
- Setting +4/–1 mm
- For overlay doors (start-ing at approx. 1300 mm height) and all inset applications
- For use with unsprung Blum hinges
- For drilling or in com-bination with adapter plates
- Output path approx. 38 mm
- Setting +4/–1 mm
- For use with sprung Blum hinges
- For drilling or in com-bination with adapter plates
- Output path approx. 38 mm
- Setting +4/–1 mm
() Screw-on catch plate
() Screw-on catch plate
655
Motion technologiesTIP-ON for doors ◀Accessories ◀◀
Catalogue 2016/2017 • KA-120
Inline adapter plate – short version 20/17
Order informationColour Part no.SW | TS | R7036 | NI-L 956.1201
Planning
Front gap Catch plate
Inline adapter plate – long version 20/32
Order informationColour Part no.SW | TS | R7036 | NI-L 956A1201 SW Silk whiteTS Terra blackR7036 RAL 7036 platinum greyNI-L Nickel-lacquered
Planning
Front gap Catch plate
Cruciform adapter plate – long version 37/32
Order informationColour Part no.R7036 956A1501 R7036 RAL 7036 platinum grey
Planning
Front gap Catch plate
Page instructionsOverview – TIP-ON for doors 653Assembly position and number required 656Assembly, removal and adjustment 656
AssemblyTemplate 742Drilling template for mounting plates 743Positioning template for catch plate 766PRO-CENTER 692
MINIPRESS PRO 696MINIPRESS P 708MINIPRESS M 712
FA Front overlay* 3 mm offset installation
FA Front overlay* 3 mm offset installation
FA Front overlay* 3 mm offset installation
- Fixing with chipboard screws Ø 3.5 or Ø 4 mm
- Alternative assembly with system screws
- TIP-ON must be or-dered separately
- Fixing with chipboard screws Ø 3.5 or Ø 4 mm
- Alternative assembly with system screws
- TIP-ON must be or-dered separately
- Fixing with chipboard screws Ø 3.5 or Ø 4 mm
- Alternative assembly with system screws
- TIP-ON must be or-dered separately
SW Silk whiteTS Terra blackR7036 RAL 7036 platinum greyNI-L Nickel-lacquered
Mot
ion
tech
nolo
gies
656
Motion technologies ▶ TIP-ON for doors▶▶ Assembly, removal and adjustment
Catalogue 2016/2017 • KA-120
Assembly position and number requiredOptimal opening support is ensured when the TIP-ON unit is attached in the actual handle position
This can deviate ±300 mm and up to a quarter of the cabinet width for the width. Also for larger doors only 1 pce/door
TIP-ON 956x – for drilling
TIP-ON 956x – with horizontal adapter plate
TIP-ON 956x – with cruciform adapter plate
Mot
ion
tech
nolo
gies
FA Front overlay* 3 mm offset installation
FA Front overlay* 3 mm offset installation
FA Front overlay* 3 mm offset installation
Clean, oil-free, dry surface
Clean, oil-free, dry surface
Clean, oil-free, dry surface
Assembly
Assembly
For hard surfaces and/or MDF Ø 2.5 mm pre-drilling and counter-sinking
For hard surfaces and/or MDF Ø 2.5 mm pre-drilling and counter-sinking
For hard surfaces and/or MDF Ø 2.5 mm pre-drilling and counter-sinking
Attention: TIP-ON do not glue
657
Motion technologiesTIP-ON for doors ◀Assembly, removal and adjustment ◀◀
Catalogue 2016/2017 • KA-120
Depth adjustment
Mot
ion
tech
nolo
gies