GP300

�1

Remote Speaker MicrophoneThe Remote Speaker Microphone is a water-resistant compact that allows the user to talkand listen without removing the radio fromthe belt, case or charger. It has a coiled cord,push-to-talk switch and clothing clip on theback cover.HMN9030A Remote Speaker Microphonewith Coil Cord and Clip Back—FactoryMutual ApprovedHMN9030AP Resale Packaged

Surveillance KitsSurveillance accessories allow the user toprivately receive communication with theearpiece and are ideal when environmentsrequire discreet communication.HMN9727B Earpiece Assembly withEarphone and Urethane Earloop, withoutVolume Control, Beige (single wire)—Factory Mutual ApprovedHMN9727BP Resale PackagedRLN4894A Earpiece Assembly withEarphone and Urethane Earloop, withoutVolume Control, Black (single wire)HMN9752B Earpiece Assembly withEarphone, Volume Control, and UrethaneEarloop, Beige (single wire)—FactoryMutual ApprovedHMN9754D Earpiece Assembly with 2-piece Surveillance Microphone and Push-To-Talk Combined, Beige (two wire; rubbereartip style)—Factory Mutual ApprovedHMN9754DP Resale PackagedRLN4895A Earpiece Assembly withMicrophone and Push-To-Talk Combined,Black (two wire)RLN5198A Resale Packaged SurveillanceKit with Clear Comfortable Acoustic Tube

HMN9752B

HMN9754D

NTN8370A Extreme Noise Kit, includes 2foam earplugs for loud environments andprovides 24dB of noise reduction5080384F72 Replacement Foam Plugs—pack of 50 (use with NTN8370), noisereduction rating=24dBNTN8371A Low Noise Kit includes rubbereartip for low noise environments; doesnot provide hearing protection.5080371E69 Small Beige Rubber Eartips,pack of 255080371E73 Standard Beige RubberEartips, pack of 25

Completely Discrete EarpieceEnables users to communicate with ease, infull privacy, without visible equipment. Thisminiaturized receiver is discreetly hidden inear, where it fits comfortably for long periodsat a time. Small as it is, it offers a full rangeof audio functions including automaticsquelch, automatic gain control and noisefiltering. Average battery life is approximately100 hours and includes an end-of-life batterycircuit generating a warning signal when thebattery needs to be changed.Kit includes wireless receiver plus an inductiveneckloop. Just remove the earpiece on anystandard 2 or 3 wire Motorola surveillance kit(sold separately) and plug in the neckloop touse. Kit includes 6 spare batteries and 5replacement ear wax guards.RLN4922A Completely Discreet Earpiece KitReplacement ItemsRLN4919A Ear Wax Guards, 5 per pack

RNN4005A 1.4 Volt Battery, 6 per pack

RLN4922A

Mic JacketsThe MicJackets provide protection to the“head” of the remote speaker microphone.MicJackets are ideal for environments wherethe user’s remote speaker microphone isexposed to dust, dirt, and metal particlesRLN4904A MicJacket Kit (Compatible withMicrophones HMN9275 and HMN9030)

NTN8371A

Noise KitsThis lightweight translucent tube attaches toMotorola surveillance accessories to provideadditional flexibility and comfort. Clothingclip prevents the accessory from being pulledfrom the ear due to body movement or headrotation.

HMN9030A

�2

Audio Accessories

Flexible Ear ReceiverThis receiver earpiece contains a flexibleearloop and speaker which rests external tothe ear.BDN6720A Flexible Ear Receiver—earpiece without volume control (flexibleearloop and speaker which rests externalto ear), (GP300—NOT FM approved—HLN8096 security clamp is recommendedand must be ordered separately)BDN6720AP Resale Packaged7580372E11 Replacement Foam EarCushion for use with BDN6420

Add-On Retrofit KitsHLN3748A DTMF Retrofit for 16-channelmodels (applicable on shipments after3/15/92); Factory Mutual Approved radiosmust be returned to the depot for retrofitting

Ultra-lite Earpiece withmicrophone and Push-to-TalkSmall and lightweight, this earpiece clipscomfortably to the ear and features a boommicrophone and in-line PTT.

PMMN4001A Ultra-lite Earpiece withMicrophone and Push-to-Talk

Ear Microphone System (EMS)This compact unit picks up the voice throughbone vibrations in the ear canal. Theminiature earpiece leaves the hands free andface unobscured when worn by rescue andhazard protection personnel, and allows theuser to retain the ability for direct hearingand speaking. For personnel required to wear breathingapparatus, communications with protectivemasks are as clear as communicationswithout. And its high speech clarity undernoisy environments makes it ideal for highnoise environments. Available in PTT or Voice Activated (VOX).BDN6646C Ear Microphone for StandardNoise Levels (up to 95dB) with Push-To-Talk interface, (HLN8096 security clamp isrecommended; order separately)—FM approvedBDN6706B Ear Microphone for StandardNoise Levels (up to 95 dB) with Push-to-Talk and Voice-Activated Interface module(HLN8096 security clamp isrecommended; order separately)—FM approved

Ear Microphone System (EMS)Accessories5080371E73 Rubber Ear Inserts for singlewire and two wire earpieces—quantity 250180358B38 Finger Push-to-Talk Switch forEar Microphone System—FM approved0180300E83 Body Switch Push-to-Talk forEar Microphone System0180358B33 Medium Earholder for EarMicrophone System, black (for securingear microphone in ear); additional sizesand colors availableHLN8096A Audio Accessory Security Clamp

BDN6706B

Clear Comfortable EarpieceThe clear comfortable earpiece forms to theinside of your ear and is perfect for low-noiseenvironments. Compatible with theNTN8371A, clear acoustic tube assembly,and most surveillance kits (1, 2 and 3 wire).This earpiece is made of easy-to-cleanchemically inert, hypo-allergenic material.There are 3 items needed to make thisproduct work:1. Clear Comfortable Earpiece2. Clear Acoustic Tube Assembly

(NTN8371A)3. Surveillance KitRLN4760A Small Custom Earpiece, right earRLN4763A Small Custom Earpiece, left earRLN4761A Medium Custom Earpiece,right earRLN4764A Medium Custom Earpiece, left earRLN4762A Large Custom Earpiece, right earRLN4765A Large Custom Earpiece, left ear Lightweight Headsets

HMN9013A Lightweight AdjustableHeadset with Swivel Boom MicrophoneHLN8096 security clamp recommendedordered separately; compatible withInternal VOX)HMN9013AP Resale PackagedRMN4016A Lightweight AdjustableHeadset with Swivel Boom Microphoneand In-Line Push-to-Talk ButtonREX4648A Replacement Foam Earpad and Windscreen Kit for RMN4016A andHMN9013A

HMN9013A

BDN6720A

GP300

�3

Medium Weight HeadsetsMedium Weight Headsets offer high-claritysound with the additional hearing protectionnecessary for providing consistent, clear two-way radio communication in harsh, noisysituations.HMN9021A Medium Weight Over-the-Head,Dual Muff Headset: Noise Reduction Rating = 24dB (HLN8096 Security Clamprecommended; order separately)HMN9022A Medium Weight Dual MuffHeadset, Behind-the-Head (can be worn withhelmet); Noise Reduction Rating = 24dB(HLN8096 security clamp recommended;order separately)

7580376E34 Replacement Foam Earseals (1pair) for use with HMN9021 and HMN9022BDN6647F Medium Weight Single SpeakerHeadset with Boom Microphone (GP300-NOT FM Approved—HLN8096 securityclamp recommended—order separately—compatible with Internal VOX)

HMN9021ABDN6647F

Noise-Canceling Headsets withBoom MicrophoneIdeal for two-way communication in extremelynoisy environments. Dual-muff tacticalheadsets include two microphones on theoutside of the earcups which reproduce theambient sound back into the headset. Harmfulsounds are suppressed to a safe level and lowsounds are amplified up to 5 times the originallevel, but never more than 82dB(A). Includeson/off volume control on earcups and 3-foot

coiled cord. Easily replaceable earseals are filledwith liquid and foam combination to provideexcellent sealing and comfort. Requires separatein-line PTT adapter cable. Hardhat notincluded.

RMN4052A Tactical Headband StyleHeadset, Grey; Noise Reduction Rating of 24dBRMN4053A Tactical Hardhat MountHeadset, Grey; Noise Reduction Rating of 22dB

RMN4053ARMN4052A

Hardhat Mount Headset withNoise-Canceling BoomMicrophoneIdeal for two-way communication in high-noise environments; mounts easily tohardhats with slots, excellent noise reductionof 22dB. Easily replaceable earseals are filledwith liquid and foam combination to provideexcellent sealing and comfort. 3-foot coiledcord assembly. Requires separate in-line PTTadapter cable. Hardhat not included.RMN4051A Two-Way Hardhat MountHeadset, BlackAdapter CablesRKN4094A In-Line PTT Adapter Cable forGP300, SP50 and P1225 Radios; for usewith RMN4051,RMN4052, RMN4053

RMN4051A

Replacement Earseals forHeadsetsRLN4923A Includes Two ReplacementSnap-In Earseals; recommendedreplacement interval is once every sixmonths to ensure constant level ofattenuation, hygiene and comfort. For usewith RMN4051, RTMN4052 and RMN4053

Heavy Duty HeadsetBDN6648C Heavy Duty Headset withNoise Cancelling Boom Microphone,Noise Reduction Rating = 24dB

�4

Audio & Carrying Accessories

Carrying CasesA variety of carrying accessories are availablefor your comfort and convenience. Thecarrying cases are available in sizes designedto fit your radio and battery and permitaudio to be heard clearly.

Nylon Carrying CasesHLN9750B Nylon Carrying Case with Belt LoopHLN9750BP Resale PackagedHLN9017A Nylon Carrying Case for fullyapproved FM 1200 mAh battery

Leather Carrying Cases HLN9873A Standard Leather CarryingCase with Swivel and D-Rings (for use withshoulder strap)HLN9873AP Resale PackagedHLN9720A Standard Leather CarryingCase with Belt Loop and D-Rings (for usewith shoulder strap)HLN9721A Slim Leather Carrying Casewith Belt Loop and D-Rings (for use withshoulder strap)HLN9008A Leather Case with Belt Loopfor fully approved FM 1200 mAh batteryand D-Rings (for use with shoulder strap)HLN9009A Leather Case with Swivel forfully approved FM 1200 mAh battery andD-Rings (for use with shoulder strap)

Carrying Case AccessoriesWrist StrapHLN8052A Wrist StrapCarry StrapNTN5243A Shoulder Carrying Strap(GP300—use with leather carrying caseswith D-Rings and nylon cases withHLN9149AR)Straps HLN9084A Replacement Strap for moldedcarrying holder—HLN9076HLN9973A Replacement Strap for nylonand leather carrying cases (GP300—forleather carrying case)HLN9975A Replacement Strap for DTMFleather carrying case (HLN8411, HLN9970, and HLN9011)HLN9974B Replacement Strap forcarrying cases (GP300—for leathercarrying case)

Carrying Case AccessoriesBelt ClipsHLN9724A 2-1/2" Belt ClipHLN8255B 3" Spring Action Belt ClipNTN5533A Replacement Belt Clip 3”SwivellerTDN1002A Swiveller — includes holster,belt and strapHLN9149AR Swivel Belt Loop Adapter(GP300 — for use with HLN9720,HLN9721, HLN9750, HLN9011,HLN9970 carrying cases)HLN9035A Replacement Swivel BeltLoop 2-1/2"NTN8040B 3" Swivel Belt LoopTDN1003A Replacement/Spare Swiveller Button

HLN9149AR

Carrying Case AccessoriesCarrying HolderHLN9076B Molded Carrying Holder with3" Spring Action Belt ClipHLN8414A Chest Pack Carrying HolderHLN9985B Waterproof Bag, includes large Carrying strap

HLN9076B

DTMF Carrying Cases HLN9970A DTMF Standard LeatherCarrying Case with Belt Loop and D-Rings(use with shoulder strap)HLN8411A DTMF Leather Carrying Casewith Swivel and D-Rings (use withshoulder strap)HLN9011A DTMF Leather Carrying Casewith Swivel—fully approved FM 1200 mAhbattery and D-Rings (use with shoulderstrap)

HLN8414A

GP300

�5

Chest Pack Carry the radio mounted on chest withadjustable straps over shoulders and around waist.HLN6602A Universal Chest Pack withRadio Holder, Pen Holder and VelcroSecured Pouch1505596Z02 Replacement Strap for HLN6602A

Break-a-Way Chest PackAll of the same features as the original chestpack (HLN6602A) plus break-a-way tabsthat allow the entire pack to be pulled offwith approximately 10 lbs of pressure. Perfectfor railroads, manufacturing locations,construction sites and anywhere that safety isa concern.RLN4570A Break-A-Way Chest Pack

HLN6602A

RLN4815A

HNN8308A

RadioPAK™RLN4815A Universal RadioPAK™ withRadio Holder. Worn around waist withadjustable belt. Includes attached 6" by 8"zippered pouch for other job necessities4280384F89 Universal RadioPAK™ BeltLengthener; fits waists larger than 40"

Miscellaneous CarryingAccessoriesRLN4943A Universal Holder withGooseneck Bracket Provides flexiblemounting solutions for portable radiosRLN4945A Universal Holder withGooseneck Bracket and Wheelchair QuickRelease AssemblyRLN4944A Wheelchair Quick Release Assembly

BatteriesHNN8133C NiCD, 1200 mAh, 7.5v, FM ApprovedHNN8308A NiCD, 600 mAh, 7.5v, SlimHNN9628B NiCD, 1200 mAh, 7.5v, HNN9701A NiCD, 1100 mAh, 7.5v, FM ApprovedHNN9808B NiCD, 600 mAh, 7.5v, FM Approved, Slim

WPNN4040AR NiMH, 1600 mAh, 7.5v,(only compatible with intellichargers)

Vehicular Battery EliminatorHKN8036B Vehicular Battery Eliminator(utilizes battery in vehicle for power)6580379E53 3 Amp Mini Blade FuseReplacement for HKN8036

Vehicular HolderThe portable radio holder slides over andhangs from the door panel in a vehicle. Theradio’s belt clip slides onto the portablehanger allowing convenient, easy mounting.Two sizes are available to fit door panels.TDN9327A Portable Radio Hanger fordoor panels up to 2.75"TDN9373A Portable Radio Hanger fordoor panels up to 3.25"

TDN9327A

TDN9373A

HNN8308A

�6

Carrying Accessories, Batteries & Chargers

ChargersSingle Unit Chargers available in either desktopor compact styles for small system users.Multiple unit chargers can be wall or rackmounted and are ideal for multi-shiftoperations. All chargers are specifically designedto meet the requirements of batteriesmanufactured by Motorola.

Single Unit Chargers, RapidRateHTN9042A Single Unit Intellicharger, 110V,(90-minute charge time for NiCD and NiMH batteries)HTN9043A Single Unit Intellicharger, 220V,European plug (90-minute charge time forNiCD and NiMH batteries)HTN9044A Single Unit Intellicharger,240V, UK plug (90-minute charge time forNiCD and NiMH batteries)HLN9719A Vehicular Charger Adapter andBracket (12V—for use with the HTN9042rapid rate charger): a charger base, withoutthe transformer, HTN9886C can be orderedseparately through AAD

Single Unit Chargers, Standard RateHTN9702A 120V, 10-hour standard rate chargerHTN9804A Single Unit Standard Charger,220V 10-Hour, European plugHTN9805A Single Unit Standard Charger,240V 10-Hour, UK plug

Multi-Unit ChargersMulti-Unit Chargers can charge up to sixbatteries in approximately one hour and areavailable in a variety of voltages for domesticand international applications.HTN9748C 120V, 6 Unit, Rapid RateCharger for use with NiCD batteriesHTN9811C 220V, 6 Unit, Rapid RateCharger, European plug for use with NiCD batteriesHTN9812C 240V, 6 Unit, Rapid RateCharger for use with NiCD batteries,United Kingdom plug

HTN9060A 120V, 6 unit, 90-Minute RapidRate Charger for use with NiCD and NiMH batteriesHTN9061A 220V, 6 Unit, 90-Minute RapidRate Charger for use with NiCD and NiMHbatteries, European plugHLN9293A Wall Mounting Bracket for 90-minute multi-unit charger (GP300—usewith HTN9060 and HTN9061)HLN9944A Wall Mounting Bracket forMultiple Unit Chargers

HTN9042A

HTN9702A

HTN9748C HTN9060A

WPPN4065ARShown With Optional

Adapter Plates

Motorola Conditioning Charger (MCC)The MCC utilize negative pulse chargingtechnology that will help extend battery lifeand enhance battery operation. It will safelycondition and charge your specified nickelcadmium (NiCD) and nickel metal hydride(NiMH) batteries in approximately an hour.The MCC controls heat build up due to itscharging and termination algorithms and itsmaintenance mode allows batteries to besafely left on the charger for extended periodsof time. Optional accessories are availableallowing these chargers to be used in bothAC and DC environments providing optimalcharging flexibility.

WPPN4002AR Base Charge Unit Only,110V ACWPPN4006AR Base Charge Unit Only,220V ACWPLN4088AR Motorola ConditioningCharger—includes 7.2 Volt Base, 110V AC,removable adapter plate and transformer,60-minute rapid chargeWPLN4089AR Motorola ConditioningCharger—includes 7.2 Volt Base, 220V AC,removable adapter plate and transformer,60-minute rapid chargeWPPN4005BR Adapter Plate Only (forconditioning charger)3080384G15 Cigarette Lighter AdapterWPPN4065AR Four-Station Base, 110V(order adapter plates separately)

GP300

�7

RLN4814A

Vehicular MountingVehicular Mounting Bracket and HardWire Cable for Single Unit MotorolaConditioning Chargers, includesRLN4814A 3080384M21, DC hard wire cable3080384M21 DC Hard Wire Cable, ForVehicular Installation (included inRLN4814A)

Battery MaintenanceSystemPlus (BMSPlus) Increase the useful life of your batteries.Using interchangeable battery adapters (soldseparately), the BMSPlus is capable ofcharging and discharging, analyzing,conditioning and cycle testing; trackingbattery voltage and capacity (mAh) supportsNiCD, NiMH and Li lon battery chemistries.The BMSPlus offers a 3-year warranty. Itseasy-to-use design supports hundreds of 2-way, cellular, and camcorder batteries withprinter port* (Serial-RS-232C port—usesfemale 9-pin to male 25-pin cable).WPLN4079BR Six Station, 110V AC, 50/60 HzWPLN4080BR Six Station, 230V AC,50/60 HzNDN4005B Three Station, 110V AC, 50/60 Hz (does not support Li lon or 3 cell batteries)NDN4006B Three Station, 230V AC, 50/60 Hz (does not support Li lon or 3 cell batteries)*Compatible with the STAR MicronicsSP200 series printers, available from anySTAR Micronics distributor, and otherprinters with STAR emulation.

BMSPlus Field Upgrade KitWPPN4085AR BMSPlus Field Upgrade Kitfor WPLN4079AR, WPLN4080AR andWPLN4081AR allows these units tosupport Li lon battery chemistries.

BMSPlus Battery AdapterTDN9437A Battery Adapter, belt cliprequired—for use with HNN9701A andHNN9628A batteriesTDN9662A Adapter, for HNN9628Abattery without belt clip

WPLN4079AR

TDN9437A

Battery Optimizing System(BOS)No other battery analyzer matches the speed,accuracy, versatility and ease-of-use of theBattery Optimizing System. Best of all, theBattery Optimizing System helps lower yourbattery costs, because you will get themaximum performance possible from eachbattery when it is maintained by the BatteryOptimizing System.• Accommodates NiCD, NiMH, Li Ion

and SLA• Impedance test—checks battery

condition in six seconds• Proprietary recondition cycle restores

NiCD and NiMH batteries• Printer output for reports and labels,

computer interface• High power—programmable.from

100mA to 2 Amp per station• Interchangeable adapters accommodate

all major batteries• Simple, intuitive user interface

with keypadWPLN4071AR BOS Four Station, 110V AC, 50/60 HzWPLN4073AR BOS Four Station, 230V AC, 50/60 Hz

BOS Battery AdapterRL-71883 Standard Adapter, GP300

WPLN4071AR

Vehicular Charger BracketHLN9719A Vehicular ChargerAdapter/Bracket, 12V (for use with rapidrate chargers HTN9630, HTN9802,HTN9803, HTN9167, HTN9168,HTN9169, HTN9042, HTN9043, orHTN9044)

�8

Chargers & Antennas

AntennasHeliflexMotorola Heliflex antennas are specificallyengineered for maximum output and greatestcommunication coverage. HAD9338AR VHF Heliflex, 136-162 MHz, 6"NAD6502AR VHF Heliflex Antenna, 146-174 MHz, 6"8505816K24 Heliflex Stubby Antenna, 403-430 MHz, 3"8505816K25 Stubby, 440-470 MHz, 3"8505816K26 Heliflex Stubby Antenna, 470-512 MHz, 3"

Flexible WhipFlexible whip antennas have a one-piecefinish and steel core for optimal radiationcharacteristics. Provides more comfort whenradio is worn on the belt. NAE6483AR Flexible Whip,403-520 MHz, 6"Turnable VHFHAD9728B VHF Kit, 146-174 MHz, 6"StubbyThis quarterwave stubby antenna is idealwhen radio is worn on the belt because theshort antenna is non-obtrusive.HAD9742A Stubby, 146-162 MHz, 3"HAD9743A Stubby, 162-174 MHz, 3"

HAD9743A

NAE6483AR

8505816K25

HAD9728B

8505816K24

Vehicular ChargerA great traveling companion that ensuresconstant communication while on the road.Allows the battery to rapid charge while usingthe radio. Users can receive communicationimmediately once the charger is connected,and transmit from a previously "dead" batteryin just 5 minutes. Includes voltage regulatedlighter adapter, custom charger base,mounting bracket and coil cord. Ideal forpublic safety, utility and construction.Compatible with P1225, GP300, GTX,LTS2000, P110 radios.RLN4833A Travel Charger

Travel Charger MountingBracket0780384K84 Universal Mounting Bracket forTravel Charger, includes screws and nylon cord

Travel Charger ACTransformerTravel Charger AC Transformer connects to thecigarette lighter adapter cord to allow it to beplugged into an AC wall outlet for indoor use.2580600E05 Transformer, 120V (US)2580600E06 Transformer, 230V (Euro)2580600E07 Transformer, 230V (U.K.)2580600E08 Transformer, 220V (Argentina)

14 9

Two-way Racing Headset

JUST IN TIME FORRACING SEASON:PIT-PROVEN TECHNOLOGYFOR EVERY BUSINESS

Motorola is the Official Wireless Equipment

supplier of CART®.

During the upcoming racing season, drivers, teams, offi-cials, safety workers, medical personnel and CART®

operations staff will all rely on performance-provenMotorola Two-way radio accessories. They don’t wantto settle for anything less in the heat of a race, anymore than your customers should in the heat of today’sbusiness world.

So whether your customers’ playing field is a racetrack,construction site or other challenging environment, theycan count on this Racing Headset for superior comfortand dependable operation.

Whether it’s a pit crew or a roadcrew, Motorola Accessories helpkeep customers in control.

RACING HEADSET FOR TWO-WAY RADIOS

The headset that excels in high-noise environ-

ments.

This Racing Headset is ideal for racing teams likeCART®; that’s why it’s used in the pits. It’s also toughenough to withstand the wear and tear of use atdemanding manufacturing and construction sites.

RMN5015A

Racing Headset for Two-way Radios

Adapter Cable required. Compatible with Two-way Radiomodels SP50, SP50+, GP300, P1225, P1225.LS, CT250,CT450, CT450.LS, HT1000, JT1000, MTS2000, MTX8000,MTX9000, MT2000, XTS3000, XTS3500, HT750, HT1250,HT1250.LS, MTX850, MTX850.LS, MTX8250 andMTX8250.LS.

Published List: $500.00

RKN4090AAdapter CableAdapter Cable for SP50, SP50+, GP300, P1225,P1225.LS, CT250, CT450 and CT450.LS Two-way radios.

Published List: $100.00

RKN4091AAdapter CableAdapter Cable for HT750, HT1250, HT1250.LS, MTX850,MTX850.LS, MTX8250 and MTX8250.LS Two-wayradios.

Published List: $140.00

BDN6673BAdapter CableAdapter Cable for HT1000, JT1000, MTX8000,MTX9000, MT2000, MTS2000, XTS3000 and XTS3500Two-way radios.

Published List: $230.00

PHONE: 1-800-422-4210TTY PHONE: 1-866-522-5210MOTOROLA ONLINE USERS: https://www.motorola.com/businessonlineFAX: 1-800-622-6210

At the track, thisRacing Headsetdeliversperformanceworthy ofdriving legends.

Prices subject to change and do not include shipping, handling and applicable tax.