1
NEW. pro lucts tank, a 500-watt Teflon® heater with a digital thermostat, low-level probe, and one 10-Amp, 12-Volt DC rectifi- er with analog amp and volt meters. Technic Mini Mod 2 (right) features one 7- gallon process tank, one 7-gal- lon rinse tank, a 1,000 watt Teflon@ heater with a digital thermostat, low- level probe and one 25-Amp, 12-Volt DC rectifier with analog amp and volt meters. Mini-Mod tanks are con- tained within the white polypropy- lene module and feature a covenant utility self for the rectifier and other instrumentation. For more informa- tion, visit www.technic.com. CircLe 416 on reader service card MOUNTED POINTS A line of mounted points for debur- ring, blending, and polishing stain- less steel, aluminum, and exotic met- als, without excessive metal removal, is available from Rex-Cut Products, Inc. Rex-Cut Megabrite TM Mounted Points are soft, resilient, and con- form well to holes, contours, radii, and edges for light deburring, blend- ing, and polishing applications. Made from a non-woven synthetic fiber material, which is compressed, bonded, and impregnated with abra- sives, they provide smooth, chatter- free operation while maintaining the part's geometry. For more informa- tion, visit www.rexcut.com. Circle 417 on reader service card OVEN SYSTEMS David Weisman, L.L.C.'s latest Heavy- Duty Gas Fired or Electrically Heated Hot Air Convection Multipass Overhead Conveyor Oven Systems are designed for customers to heat, dry, and/or cure liquid and powder coat- ings on small, medium, and large three-dimensional products. The sys- tem features quality gas- fired burners or electric heating elements and con- trols, unique air recirculation and exhaust systems, and a heavy-duty energy efficient oven insulated enclo- sure. System can be used as a stand- alone dry-off, or cure oven or as com- bination dry-off/cure oven in a con- tinuous or indexing overhead coating system. For more information, e-mail [email protected]. CircLe 418 on reader service card Chemical Analysis & Statistical Control Software www.TrueLogicCompany.com (800) 448-2548 TRUELOGIC TRUE CONTROL WITHIN YOUR REACH Visit us at SUR/FIN 2007 Booth 602 Circle 111 on reader information card or go to www.metalfinishing.com/advertisers Forty yearsof metalfinishing experience lets us listen to your concerns and then, utilizing Computer Aided Design, find the solution • matched to your specifications, your timetable andyour budget. Tell us your requirements - tank dimensions, solution level and type, steam pressure available,etc. and let us designthe coilsto fit your requirements precisely, efficiently and cost- effectively. Take advantage of our easy-to-use on-line coil design tool. Or contact us for information on heat exchangers, anodebaskets and DSA. So giveus a call or a mouse-click and let our "you-shape" putyou in great shape. WE'RE VULCANIUM PLA TI#G SYSTEMS 40Years of Serving Customers Northbrook,IL 60062 USA Toll-free: 888-922-0040 (outside IL) • Direct:847-313-4823 E-Mail: [email protected] www.Vulcanium.com Circle 115 on reader information card or go to www.metalfinishing.com/advertisers www.metaLfinishing.com July/August20071 meta[finishing 1105
