+ All Categories
Home > Documents > Mouse Tip Inflator Tool - Shippers Products...MouSe Tip 1. To AppLY, push slide pin to the uNLoCK...

Mouse Tip Inflator Tool - Shippers Products...MouSe Tip 1. To AppLY, push slide pin to the uNLoCK...

Date post: 07-Oct-2020
Category:
Upload: others
View: 0 times
Download: 0 times
Share this document with a friend
2
For more informaon, call a Shippers Products Securement Specialist 1.800.468.1230 Inflator Tool Mouse Tip Safe. Positive lock ensures tip will not fall off during inflation Easy. Compact design attaches quickly & easily into narrow voids Fast. Saves time with quick install- inflates bags quickly Inflating Shippers Products airbags is easier than ever before. Just slide and lock the Mouse Tip onto the Fastfill valve and begin inflating-it’s that simple! The compact design easily fits in narrow voids, al- lowing for quick and correct airbag placement. Our Mouse Tip locks securely onto the Fastfill valve, preventing inflator disconnect during inflation. Fastfill valve Fastfill inflator with Mouse Tip Visit us at www.shippersproducts.com For a full video tutorial please scan the QR code with with a smart phone or visit: hp://is.gd/Y0lSaQ
Transcript
Page 1: Mouse Tip Inflator Tool - Shippers Products...MouSe Tip 1. To AppLY, push slide pin to the uNLoCK position. 2. Tilt Mouse Tip head down-ward, completely exposing infla-tion valve channel.

For more information, call a Shippers Products Securement Specialist

1.800.468.1230

Inflator ToolMouse Tip

Safe. Positive lock ensures tip will not fall off during inflation

Easy. Compact design attaches quickly & easily into narrow voids

Fast. Saves time with quick install- inflates bags quickly

Inflating Shippers Products airbags is easier than ever before. Just slide and lock the Mouse Tip onto the Fastfill valve and begin inflating-it’s that simple! The compact design easily fits in narrow voids, al-lowing for quick and correct airbag placement. Our Mouse Tip locks securely onto the Fastfill valve, preventing inflator disconnect during inflation.

Fastfill valveFastfill inflator with Mouse Tip

Visit us at www.shippersproducts.com

Shipment Securement Specialists

For a full video tutorial please scan the QR code with with a smart phone or visit:http://is.gd/Y0lSaQ

Page 2: Mouse Tip Inflator Tool - Shippers Products...MouSe Tip 1. To AppLY, push slide pin to the uNLoCK position. 2. Tilt Mouse Tip head down-ward, completely exposing infla-tion valve channel.

instructions

MouSe Tip

1. To AppLY, push slide pin to the uNLoCK position.

2. Tilt Mouse Tip head down-ward, completely exposing infla-tion valve channel.

3. Align Mouse Tip opening with top ridge of Fastfill valve and slide onto valve (completely).

4. push slide pin to the LoCKposition. (Slide pin tension should increase in the LoCK position.)

push slide pin to the uNLoCK position. Slide to remove from inflation valve .

To ReMoVe Mouse Tip…

For more information, call your Shippers Products load securement specialist at 800.468.1230

Shipment Securement Specialists

Safety Tips-Read the operation instructions and followthem carefully.

-Always wear safety glasseswhen inflating air bag(s).

-Air bags must be dry and free from oil and dirt. Dirty air will clog the air gauge element and will produce an incorrect reading.

-use a filter and regulator at air source.

-Max air line pressure setting is 100 p.s.i. To receive max air flow, use a 3/8” or 1/2” air hose.

-Never use the inflator as a blowgun for cleaning.

-use the inflator only withShippers products air bags.

-use only an Shippers products combination inflator kit.

-Never fill air bags using abottled air or gas source.


Recommended