MT SERIES CONSTRUCTION/MULTI-PURPOSE telescopic handler
MT
KEY FEATURES
7,000 lbs. (3175 kg) Capacity
22 ft. 8 in (6.90 m) Lift Height
Ideal for Construction Handling
Compact and Maneuverable
Tier IV-Certified Deutz Diesel Engine
Variety of Attachments
MT 732 CONSTRUCTION/MULTI-PURPOSE TELESCOPIC HANDLER SPECIFICATIONS
DIMENSION REFERENCE DIAGRAMS
Load Chart based on 24 inch (600 mm) load center per B56.6.
MT 732Maximum Lift Capacity – 24” Load Center (kg) 7,000 lbs. (3175)
Maximum Lift Height (m) 22′8″ (6.90)
Capacity at Maximum Lift Height (kg) 5,500 lbs. (2500)
Maximum Forward Reach (m) 13'3" (4.04)
Capacity at Maximum Reach (kg) 2,000 lbs. (905)
Cycle Times – Unloaded
Lifting 6.8 sec.
Lowering 5.8 sec.
Boom Extension 6.8 sec.
Boom Retraction 4.7 sec.
ENGI
NE Type Deutz Tier IV
Power (kW) 74 hp (55.4)
Displacement (cm3) 4 cyl. 203 cu. in. (3621)
Maximum Torque @ 1600 rpm (Nm) 302 ft.lbs. (410)
Injection / Cooling Electronic / Water
TRAN
SMIS
SION Type Torque Converter
Maximum Travel Speed (km/hr) 15.5 mph (25)
HYDR
AULIC
S
Pump Type Gear
Pressure (bar) 3822 psi (260)
Flow Rate (L/min.) 27.5 gpm (104)
CAPA
CITIE
S Hydraulic Oil (L) 33.8 gal. (128)
Fuel Tank (L) 31.7 gal. (120)
SPEC
IFICA
TIONS Weight – with Forks (kg) 14,947 lbs. (6,780)
Turning Radius (m) 12′6″ (3.80)
1. Ground Clearance (mm) 18″ (450)
2. Overall Length (m) 15′7" (4.76)
3. Wheel Base (m) 9'3" (2.81)
4. Cab Width (mm) 35" (890)
5. Overall Width (m) 7'8″ (2.34)
6. Overall Height (m) 7'7″ (2.30)
Maximum Drawbar Pull (daN) 12,971 lbf. (5770)
TIRES 400/80 R24
KEY
PER
FORM
ANCE
15' 10' 5'
2,00
0 lb
s. (
905
kg)
6,000 lbs.
( 2720 kg)
2,64
0 lb
s. (
1200
kg)
3,30
0 lb
s. (
1500
kg)
4,40
0 lb
s. (
2000
kg)
5,50
0 lb
s. (
2500
kg)
7,00
0 lb
s. (3
175
kg)
22'8"
8
4
2
5
1
3
6
4
2
5
1
3
6
MANITOU AMERICAS, INC. • PO Box 179 • West Bend, WI 53095
Tel: 262-334-9461 • Fax: 262-338-7517 • www.manitou.com
©2015 Manitou Americas, Inc. Manitou. All rights reserved. Printed in the U.S.A. A Manitou Group Brand.
MT732_SpecSheet_04/15-1.5M
This publication in no way constitutes an offer and the company reserves the right to alter specifications without notice.
DIMENSION REFERENCE DIAGRAMS
