Installation Instructions
Installation Instructions
YAMAHA MT-09 TRACER 2015RADIATOR GUARD
Product Reference - 12204
Kit Contents
1 x Radiator GuardA
4 x Rubber BungsB
1Installation Instructions
2Installation Instructions
Unclip the indicator wireto remove fairing
3Installation Instructions
4Installation Instructions
5Installation Instructions
6Installation Instructions
Unclip the indicator wireto remove fairing
7Installation Instructions
8Installation Instructions
9Installation Instructions
Locate round holesamongst hexagons.
Push Rubber Spacerthrough from the back of the guard
so Hexagonal shapesits on the front face
10Installation Instructions
OEM PART
OEM PART
OEM PART
A
11Installation Instructions
OEM PART
OEM PART
OEM PART
13Installation Instructions
Reverse Stages7-5 and 3-1
Installation Instructions
It is recommended that periodic inspections are made to ensurethat dirt and debris have not become trapped between the guard
and the radiator/oil cooler. Such dirt and debris would reduce the cooling efficiency of the radiator/oil cooler.
It is recommended that periodic inspections are made to ensure that all fixings are fully tightend.
www.evotech-performance.com