Here comes your footer Page 2
MTE TECHNOLOGY, INC.
• Established 1987 by MR. CLEMENT CHAN
• Approximately 250 employees at 3 sites in 3 countries.
• ISO 9001:2008 & ISO 14001:2004 Certified
• MTE Technonology Inc. Phils. overseen & managed by MR.CHARLES JAYARAJ
The company is a duly registered domestic corporation situated at Lot C2-10, Carmelray Industrial Park II, Brgy.
Punta, Calamba City, Laguna it is a subsidiary of Microtech Engineering Pte Ltd. In Singapore since it’s establishment
in the Philippines way back in 1999.
Our customers are mostly from the Multi-National Companies on Electronic, Automotive and Semiconductor Industry.
In which we are listed as a preferable contractor. In order to provide the quality precision products & Services to our
customers, we strive hard to upgrade and invest on our facility to ensure the quality of our products & services that
meets our customers requirements and expectations at all times.
_______________________ ____________________
CHARLES JAYARAJ CLEMENT CHAN General Manager President
Introduction
Here comes your footer Page 3
QUALITY POLICY
M anufacturing T owards E xcellence
Committed to Quality and Environmental Management System in achieving COSTUMER SATISFACTION &
ENVIRONMENTAL FRIENDLY FACILITY by:
• Meeting customers’ requirements;
• Complying with all legal and other requirements;
• Controlling the significant environmental aspects and impacts of our direct & indirect process;
• Conservation of resources; and
• Continually improve on the effectiveness of the quality & Environmental Management System
through relevant trainings of employees and associates
Here comes your footer Page 4
Introduction
SERVICES OFFERED
FABRICATION • Conventional Lathe & Milling
• Wire Cut, EDM, Super Drill
• CNC Machining or Milling Center
• Precision Grinding
• Finishing/Assembly
METAL STAMPING • CNC Turret
• Press Machining
• Sheet Metal Bending
• Tig Welding (SUS, Aluminum & Steel)
• Finishing/Assembly
CUTTING / MASS PRO. • Precision Lathe & CNC Turning
AUTOMATION • Machine Assembly
• Machine & Process Improvement
Here comes your footer Page 5
Introduction
Our BUSINESS PARTNERS
Here comes your footer Page 6
Sample Projects
FABRICATION & ASSEMBLY
MC501 CDR6
SUS304
MISUMI LINEAR BUSHING
• LOAD & UNLOAD JIG
Size (mm) : 75 x 98 x 118
ALT6
With EN Plating
• WAFER CASSETTE
Size (mm) : 275 x 290 x 330
Here comes your footer Page 7
Sample Projects
FABRICATION & ASSEMBLY
MISUMI
LINEAR GUIDE
• CHECKING JIG
Size (mm) : 30 x 150 x 190
• SLIDER FAB JIG
Size (mm) : 12 x 85 x 180
SUS420J2
SUS304
SUS304
AL5058
SUS420J2 HRC50~55
SUS420J2 HRC50~55
SUS304
M1.6 x P.35 INTERNAL THREAD
88 Holes
Here comes your footer Page 8
Sample Projects
FABRICATION & ASSEMBLY
• VACUUM JIG
Size (mm) : 40 x 76 x 195
• WAFER FAB JIG
Size (mm) : 22 x 158 x 158
1/8 x 8 PNEUMATIC FITTINGS
SUS420J2 HRC50~55
SUS420J2 HRC50~55
SUS304
MISUMI
MAGNETS
LOAD POSITION
UNLOAD POSITION
Here comes your footer Page 9
Sample Projects
FABRICATION & ASSEMBLY
• WAFER FAB JIG
Size (mm) : 100 x 150 x 220
• VACUUM JIG (for PCB ASSEMBLY)
Size (mm) : 45 x 250 x 300
AL5052
With EN Plating
SUS420J2 HRC50~55
BRASS
SUS304 PNEUMATIC FIITING
AL5052 SUS303
Here comes your footer Page 10
Sample Projects
FIXTURE ASSEMBLIES
• PRODUCTION WORK TABLE
Size (mm) : 450 x 525 x 1850
• PRODUCTION WORK TABLE
(Perforated Type)
Size (mm) : 750 x 100 x 800
ALUMINUM STANDARD FRAME
SUS303
SUS304
SQUARE TUBE SUS303
ROD
SUS304 MIRROR
PERFORATED PLATE
Here comes your footer Page 11
Sample Projects
FIXTURE ASSEMBLIES
• MACHINE PROTECTIVE COVER
Size (mm) : 790 x 890 x 945
ALUMINUM STANDARD FRAME
SUS304
ENGINEERING PLASTIC
• GUARDED SCRAP BIN
Size (mm) : 385 x 410 x 568
ANTI-STATIC CASTER WHEEL
SUS304 BEND PLATE
MIRROR
STAINLESS
SUS304
MIRROR
ANTI-STATIC
ACRYLIC
Here comes your footer Page 12
Sample Projects
FIXTURE ASSEMBLIES
• WASHING BASKETS
Size (mm) : 200 x 305 x 330 Size (mm) : 138 x 375 x 375
SUS303 ROD
ELECTRO POLISHED
SUS MESH WIRE FENCE SUS303 ROD
ELECTRO POLISHED
PEEK (Beige)
SUS303
ELECTRO POLISHED
Here comes your footer Page 13
Sample Projects
FABRICATION - Others
CDM
AL5052 / T6
SUS303 / 304
• PALLETS • PRECISION PARTS Mold & Dies
CARBIDE
SUS440C w/ HRC
SKS3 w/ HRC
SUS440C w/ HRC
Criticality: +/- 0.002mm or -0.002mm
Treatment: HRC, DFC , & others
AL5052 w/ EN Plating
SUS440C HRC50~55
BRASS
ULTEM
• CONSUMABLE PARTS
Here comes your footer Page 14
Sample Projects
METAL STAMPED PARTS
AL5052 / T6
ALUMINUM t= 1.50mm SECC t= 2.00mm
SECC t= 1.60mm
MILD STEEL t= 2.0mm w/ BLACKENING
MILD STEEL t= 1.50mm
SUS304 t=1.00
SUS304 t=0.50
Process Material Thickness
BENDING SUS, MS, SECC, AL 3mm, 3mm, 3mm, 5mm max.
TURRET SUS, MS, SECC, AL subjective
PRESS SUS, MS, SECC, AL subjective
Here comes your footer Page 15
Sample Projects
CUTTING / CNC TURNED PARTS
AL5052 / T6
PEEK Ø 4.00mm
(and other Engineering Plastics)
COPPER Ø 6.00mm
ALUMINUM Ø 10.00mm
SUS303 Ø3.00mm SUS303 Ø1.50mm
SUS416 Ø4.00mm
Diameter Size Available: Ø1.20 ~ Ø12.00mm
HRC & Special Coating/Finishing consideration
Here comes your footer Page 16
Sample Projects
AUTOMATION
AL5052 / T6
• MACHINE & PROCESS IMPROVEMENT From manual to automatic loading & unloading process.
CONTROL SYSTEM
Electro-Pneumatic Controls
LOAD & UNLOAD FIXTURE
SUS & Aluminum Material
Actual Set-up of Fixture
• MACHINE ASSEMBLY
CTL PANEL
CTL SYSTEM
OPTICAL 3D PROFILING MACHINE
PLASMA WELDING MACHINE
Here comes your footer Page 17
CAPABILITY:
CNC Milling Machine Center - 12 units
Horizontal Milling Machine - 2 units
CNC Lathe - 18 units
CNC Tap & Drill Machine Centre - 3 units
Conventional Vertical Milling Machine - 11 units
Conventional Lathe Machine - 4 units
Surface Grinding Machine - 9 units
Centerless Grinding Machine - 1 unit
Bench Grinder - 5 units
Bench Drill - 3 units
CNC Wire Cut Machine - 3 units
EDM Machine - 1 units
Shearing Machine - 2 units
Bending Machine - 4 units
Magnetic Deburring Machine - 1 unit
Deburring Machine - 1 unit
Degreasing Machine - 1 unit
CNC Auto Lathe Machining - 22 units
Horizontal Band-saw Machine - 2 units
Vertical Band-saw Machine - 1 unit
Manual Slotting Machine - 1 unit
Hydraulic Riveting Machine - 1 unit
Multi-Spindle Tapping Machine - 2 units
MACHINERIES & EQUIPMENTS
Here comes your footer Page 18
MACHINERIES & EQUIPMENTS
Fine Cut Machine - 1 unit
Universal Tool Cutter & Grinder - 1 unit
Precision Machine Tool Grinder - 1 unit
Profile Grinding Machine - 2 units
High Frequency Brazing Machine - 1 unit
Induction Hardening Furnace - 1 unit
EDM Drilling Machine (Super Drill) - 1 unit
Automatic Spot Welding Machine - 1 unit
DNT Table Spot Welding Machine - 1 unit
Tumbler Machine - 1 unit
Dipping Washing Machine - 3 units
Chemical Washing Machine - 1 unit
Lapping Machines - 1 unit
Centrifugal Finishing Machine - 1 unit
Hydraulic Stamping Press Machine 45 tons - 1 unit
Hydraulic Stamping Press Machine 60 tons - 1 units
Hydraulic Stamping Press Machine 80 tons - 1 unit
Hydraulic Stamping Press Machine 110 tons - 3 units
Hydraulic Riveting Machine - 1 unit
CNC Turret Punch - 2 units
Hydraulic Stamping Press Machine 200 tons - 2 units
Ultrasonic Washing Machine - 1 unit
Electric Lifter - 1 unit
Pork Lift - 1 unit
Tig Welding Machine - 3 units
Vacuum Pack Machine - 1 unit
CAPABILITY:
Here comes your footer Page 19
MEASURING TOOLS & EQUIPMENTS
Coordinate Measuring Machine - 2 units
Mitutoyo Digital Micrometer (25-50mm) - 1 unit
Mitutoyo Analog Blade Micrometer - 1 unit
Mitutoyo Blade Micrometer (0-25mm) - 6 units
Mitutoyo Inside Micrometer (0-25mm) - 1 unit
Mitutoyo Tube Micrometer (0-25mm) - 1 unit
Mitutoyo Vernier Micrometer (0-25mm) - 1 unit
Digital Outside Micrometer (0-25mm) - 28 units
Groove Micrometer (0-25mm) - 1 unit
Mitutoyo Dial Caliper (0-150mm) - 1 unit
Mitutoyo Dial Caliper (0-300mm) - 1 unit
Mitutoyo Digital Caliper (0-200mm) - 13 units
Mitutoyo Digital Caliper (0-300mm) - 5 units
Mitutoyo Digital Caliper (0-150mm) - 28 units
Mitutoyo Vernier Caliper (0-200mm) - 3 units
Mitutoyo Vernier Caliper (0-300mm) - 5 units
Mitutoyo Vernier Caliper (0-150mm) - 5 units
Mitutoyo Vernier Caliper (0-800mm) - 1 unit
Mitutoyo Vernier Caliper (0-1500mm) - 1 unit
Mitutoyo Digimatic Indicator (0-25.4mm) - 4 units
Mitutoyo Digimatic Indicator (0-50.8mm) - 3 units
Mitutoyo Dial Test Indicator (0.1mm) - 6 units
Mitutoyo Dial Test Indicator (0.4mm) - 1 unit
Mitutoyo Dial Test Indicator (0.5mm) - 4 units
CAPABILITY:
Here comes your footer Page 20
MEASURING TOOLS & EQUIPMENTS
Digital Height Gauge (0-600mm) - 1 unit
Digital Height Gauge (0-300mm) - 2 units
Digital Height Gauge (0-1000mm) - 1 unit
Seiwa Optical Microscope - 1 unit
Pin Gauge Set - 9 sets
Microscope with CCD Camera - 1 unit
Roundness Tester - 1 unit
Round Test Tester - 1 unit
Profile Projector - 1 unit
Gauge Block - 8 sets
Quick Vision - 1 unit
Top Bench Contour Projector - 1 unit
Rondcom Machine - 1 unit
Calibration Test Machine - 1 unit
Caliper Checker - 5 units
Wringing Jig - 5 units
Dino Lite Scope - 1 unit
Roughness Tester - 1 unit
CAPABILITY:
Here comes your footer Page 21
Contact/s:
MTE TECHNOLOGY INC.
Contact Person: Mr. Charles Jayaraj (Vice-President)
Plant & Office Address: Lot C2-10 Carmelray Industrial Park II,
Brgy. Punta, Calamba City 4027 Laguna
Philippines
Contact Numbers: +63-49-5080176, 5080328
Fax Number: +63-49-5080180
Email: [email protected]
MICROTECH ENGINEERING PTE LTD.
Contact Person: Mr. Clement Chan (President)
Plant & Office Address: 6 Penjuru Close Singapore 608614
Contact Numbers: +65-64421624, 64421471
Fax Number: +65-64424285
Email: [email protected]
Website: www.microtech-asia.com