m.tech Brochure 2013 2014

7/28/2019 m.tech Brochure 2013 2014

1/48

Q I P

QUALITY IMPROVEMENT PROGRAMMEAdmission to Master Degree Programmes forthe

academic year 2013-2014(for teachers of AICTE approved Degree level EngineeringInstitutions, National Institutes

of Technology and National Institutes of Technical Teachers Training and Research)

INFORMATION BROCHURE

Sponsored by

All IndiaCouncil for Technical Education(A Statutory Body of Government of India)

Admission coordinatedby

Principal Coordinator QIP

Centre for Continuing Education

IndianInstitute ofScience Bangalore

BANGALORE560 012

7/28/2019 m.tech Brochure 2013 2014

2/48

DATES TO REMEMBER:

Access to on line

submissionofapplications28

thSept 2012

Closingofon line

applicationsaccess 31st

Oct 2012

Last date for receipt of

duly forwarded application

along withenclosures

09th Nov 2012

Both online and hardcopy of the applications are required for processing,

single version of the application will not be considered.

7/28/2019 m.tech Brochure 2013 2014

3/48

DearProspectiveQIPScholar

Your interest in the Quality Improvement Programme (QIP) sponsored by AICTE isappreciated. As you may be aware, the mainobjective of the programme is to upgrade the expertise and capabilities of faculty members of the AICTE approveddegree-level engineering institutions, National Institutes of Technology NITs) and National Institute of TechnicalTeachers Training and Research (NITTTRs) of the country. The programme launched by the Government of India in the year1970, is now being implemented and monitoredby the National QIP Coordination Committee, funded through AICTE.

There are three main activities under QIP scheme for the faculty ofdegree-level engineeringinstitutions:

Providing opportunities to teachers of the degree-level engineering institutions to improve the ir qual i f ica t ions byoffering admissions to Masterand Ph.D degree programmes.

OrganizingShort Term Courses at the QIPCentres forserving teachers.

Curriculum Development Cellactivities which help to improve the class room teaching and learning.

Eight major QIP centres at IITs and IISc undertake the various activities listed above. Admission to Masters and Ph.D.programmes are also offered in selected areas in institutions recognized as Minor QIP centres. A large number ofteachersfrom engineering institutions from all over the country have pursued Master and Ph.D degree programmes under this scheme.These are aimed at improving the standard and quality of technical education through improvement of the qualifications of thefaculty members ofthe various engineering institutions.

A Curriculum Development Cellhas been set up at major QIPCentres for improving the effectiveness of technicaleducation in thecountry. Its activities include curriculum development and revision or preparation ofmonographs, textbooks, teachersmanuals, teaching aids and other resource materials, examination reforms, organizing inter-institutional programs, seminars,

workshops and panel discussions, development of educational technology, creation of methodologies for formal and informaltrainings, technical education of the handicaps, etc. A number of short term courses have alsobeen organized by major QIPCentres for the benefit ofthe faculty members ofEngineeringInstitutionsacross the country.

The QIP web sites (http://www.qip.cce.iisc.ernet.in, www.iitb.ac.in, www.iitd.ac.in, www.iitg.ernet.in, www.iitk.ac.in,

www.iitkgp.ernet.in, www.qip.iitm.ac.in, www.iitr.ernet.in, www.aicte.ernet.in) will give you necessary information about the programme as

well as about the requirements and the procedure to apply for admission in Master / Ph.D. degree programmes. The details of the disciplines

and specializations available at various centres are listed in the website and also available in the admission brochure to enable you to make

appropriate choices. You can navigate through the links on the left hand side of the main web page for admission and can download the

admission brochure.

Access to the on-line submission ofapplication opens on September 28th, 2012 (Friday). The l a s t date for the o n -line submissionof the application is October31st, 2012 (Wednesday). Please note that the last date for the receipt of the hard copy ofapplication atthe officeof the PrincipalCoordinator QIP, Center for Continuing of Education, IIScBangalore, is November31st, 2012 (Friday).

The procedure ofadmission under QIP involves the followingsteps:

Scrutiny ofallapplicationsin the officeofthe PrincipalCoordinator QIP. Short-listing by the QIPcentres for interviews and dispatchofcallletters to those selectedfor interviews. Recommendationsby the QIPcentres to NQCC.

Finalselection by the NationalQIPCoordinationCommittee (NQCC) and OfferofAdmission by the Institution where the finalselectionhas been recommendedby NQCC.

The scheduleof interviews at variousQIPCentres is given in the above websitesas wellas in the brochure, so that you canplanyour travel for a t t e n d i n g the interviews at places ofyour choice. For further information about the QIP, the applicationform or any associated item, you may contact to the Principal coordinator QIP or any of the Coordinators of the QIP Centreslistedin the website orbrochure.

For further information about a particular institution or a particular department therein, you may directly write to the Head ofconcerned department or the QIPCoordinatorof the institution.

Keep in touch with our website. Wishing you all the best,

This Programme will be discontinued from the

academic year 2015-2016

Principal Coordinator QIP, Centre for Continuing Education, IIScBangalore.
http://localhost/var/www/apps/conversion/Smart/Desktop/QIP%20Brochur%202012/(http:/www.qip.cce.iisc.ernet.in,%20%20%20www.iitb.ac.in,%20%20%20www.iitd.ac.in,%20%20www.iitg.ernet.in,%20%20%20www.iitk.ac.inhttp://localhost/var/www/apps/conversion/Smart/Desktop/QIP%20Brochur%202012/(http:/www.qip.cce.iisc.ernet.in,%20%20%20www.iitb.ac.in,%20%20%20www.iitd.ac.in,%20%20www.iitg.ernet.in,%20%20%20www.iitk.ac.inhttp://localhost/var/www/apps/conversion/Smart/Desktop/QIP%20Brochur%202012/(http:/www.qip.cce.iisc.ernet.in,%20%20%20www.iitb.ac.in,%20%20%20www.iitd.ac.in,%20%20www.iitg.ernet.in,%20%20%20www.iitk.ac.inhttp://localhost/var/www/apps/conversion/Smart/Desktop/QIP%20Brochur%202012/(http:/www.qip.cce.iisc.ernet.in,%20%20%20www.iitb.ac.in,%20%20%20www.iitd.ac.in,%20%20www.iitg.ernet.in,%20%20%20www.iitk.ac.inhttp://localhost/var/www/apps/conversion/Smart/Desktop/QIP%20Brochur%202012/(http:/www.qip.cce.iisc.ernet.in,%20%20%20www.iitb.ac.in,%20%20%20www.iitd.ac.in,%20%20www.iitg.ernet.in,%20%20%20www.iitk.ac.in

7/28/2019 m.tech Brochure 2013 2014

4/48

TABLE OF CONTENTS

Sl. No. DETAIL Page No.

I. General Information 1

II. Institutions offering M.Tech. degree programmes and their codes 2

III. Codes for Departments offering M.Tech. degree programmes at various institutions 4IV. Eligibility Criteria 7

V. Scholarship and Contingency Grant 7

VI. Conditions for Admission 7

VII. Instructions for Completing the on-line Application 7

VIII. Application Fee 9

IX. Checklist for Each Copy of the Application Form 9

X. Instructions for Dispatching 10

XI. Last Date 10

XII. Procedure for Admissions under QIP 10

XIII. Schedule of Interviews for Admission to M.Tech. degree Programmes under QIP 11

XIV. Departments and Fields of Specialization at Various Institutions 11

1. Indian Institute of Science, Bangalore 12

2. Indian Institute of Technology Bombay, Mumbai 14

3. Indian Institute of Technology Delhi, New Delhi 19

4. Indian Institute of Technology Guwahati, Guwahati 20

5. Indian Institute of Technology Kanpur, Kanpur 21

6. Indian Institute of Technology Kharagpur, Kharagpur 23

7. Indian Institute of Technology Madras, Chennai 25

8. Indian Institute of Technology Roorkee, Roorkee 27

9. Anna University, Chennai 30

10. Bengal Engineering & Science University, Shibpur 30

11. B.M.S. CollegeofEngineering, Bangalore 31

12. IndianSchoolof Mines,Dhanbad 31

13. Instituteof Technology, BHU, Varanasi 31

14. Jadavpur University,Kolkata 31

15. MalnadCollegeofEngineering,Hassan 32

16. Manipal Institute of Technology, Manipal 32

17. Motilal Nehru NationalInstituteof Technology,Allahabad 32

18. NationalInstituteofIndustrialEngineering,Mumbai 34

19. National Institute of Technology, Calicut 34

20. National Institute of Technology Karnataka, Surathkal 35

21. National Institute of Technology, Rourkela 37

22. National Institute of Technology, Tiruchirappalli 38

23. National Institute of Technology, Warangal 38

24. PSG College of Technology, Coimbatore 39

25. Shri G.S. Institute of Technology & Science, Indore 39

26. Shri Jayachamarajendra college of Engineering, Mysore 40

27. University Visveswaraya College of Engineering, Bangaluru 40

28. Visvesvaraya national Institute of Technology, Nagpur 40

Specimen Application 41

7/28/2019 m.tech Brochure 2013 2014

5/48

I. GENERAL INFORMATION

1. The majorQIPCentres at IITs and IISc offeradmission to Master degree programmes inseveraldisciplines.In addition, institutions recognized as the minor QIP Centres also offer admission to Master degreeprogrammes under QIPinsome specificdepartments.

2. The durationofthe Master Degree Programme is 24 months.

3. Candidate should visit the websitehttp://www.qip.cce.iisc.ernet.in forsubmitting on-lineapplication, updated information related to: receipt of completed application, candidates calledfor interview,selected list ofcandidates and all otherinformationpertaining to QIPadmission.

4. Candidate should read the Brochure thoroughly before i) filling in the on-line application and ii) sendingthe finalprint-out ofapplication (duly forwarded by the Head ofInstitution).

5. Candidates have to first submit their application form on-line through http://www.qip.cce.iisc.ernet.in.Applications without on-line submission will not be considered. Candidate should make sure that properInstitute / Discipline codes are entered, all relevant details are duly filled in the respective fields. Access to on-line submission of application opens on September 28th, 2012 (Friday). Last date for on-line submission of

applicationisOctober31st, 2012 (Wednesday).

6. After filling the application on-line, candidates should send the relevant number ofprints of the on-line

completed form, duly forwarded by the Principal/Head of the Institution, as instructed along with allenclosures and a DD for Rs.500/- (Rs.250/- for SC/ST/PD) drawn in favour of Registrar IISc,payable atBangalore, to The Principal CoordinatorQIP, Quality Improvement Programme Centre,Center for ContinuingEducation, IISc Bangalore, Bangalore560 012.

7. The candidate and the Principal/Head of the Institution forwarding the application should ensure that theapplication is to be send to the Principal Coordinator QIP so as to reach on or before November 09 t h ,2012 (Friday). Applications received after this date will not be considered . On receipt of theappl ica t ion , acknowledgement will be sentby email.

8. Information given by the candidate in all applicationprint-outs should be same. In case of any differenceobserved in the data relating to experience, marks, designation, addresses, age etc., his/hercandidature isliable to be cancelled at any stage even after the selection/ admission.

9. Conditional recommendation by the Principal/Head of the Institution will not be accepted . Applicationssubmitted without of the candidate a n d the appropriate authorities with seal, and/or

without the required enclosures will automatically be rejected.

10. The application numberallotted during on-line registration should be quoted in all correspondences, and

such correspondences should be routed through the Principal/Head of the candidates parentinstitution. The application number may be changed in some unavoidable circumstances and will beintimated through emailinsuch cases.

11. Short-listed candidates will receive Interview Call/Admission letterfrom the respective QIP Coordinatorof theInstitute, where t h e y have a p p l i e d to seekadmission. The Principal Coordinator QIP will not send any Call letter tothe candidates directly.

12. Interview schedule is final and ca n n o t be a l t er ed /changed under an y c ircumstances . Candidate has toappearfor interview at the Institute(s), where he/she would like to seekadmission.Candidates may plan their

travelaccordingly.

13. Concessions, relaxation, and reservations for candidates belonging to SC/ST/OBC/Physically

Disabled/ Femalecandidates are asper rules.

1
http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/

7/28/2019 m.tech Brochure 2013 2014

6/48

II.INSTITUTIONS OFFERING MASTER DEGREE PROGRAMMES UNDER QIP AND THEIR CODES

Sl. No. Name of the Institute/University Code

Institutions having Major QIP Centres: The following institutions having QIP Centres which offer admission

to Master degree (2- years)

1. IndianInstituteofScience, Bangalore560 012 BG

2. IndianInstituteof Technology Bombay, Mumbai400 076 BM

3. IndianInstituteof Technology Delhi, New Delhi110 016 DL

4. IndianInstituteof Technology Guwahati,Guwahati781 039 GW

5. IndianInstituteof Technology Kanpur, Kanpur208 016 KN

6. IndianInstituteof Technology Kharagpur, Kharagpur721 302 KH

7. IndianInstituteof Technology Madras, Chennai600 036 MD

8. IndianInstituteof Technology Roorkee, Roorkee247 667 RR

Other Institutions having Minor QIP Centres: The following recognized institutions also offer admission to

Master Degree (2 years) Programmes under QIPinsome specificdepartments as givenbelow:

9. Anna University,CollegeofEngineeringCampus, Chennai600 025

AU

(i) Civil Engineering, (ii) ElectricalEngineering,(iii) Information and CommunicationEngineering,

(iv) MechanicalEngineering

Anna University, AC Technology Campus, Chennai600 025

(i) Chemical Engineering, (ii) Leather Technology

Anna University,Madras Instituteof Technology,Chennai600 044

(i) AerospaceEngineering, (ii) AutomobileEngineering, (iii)ElectronicsEngineering,

(iv) InstrumentationEngineering (v) Production Technology

10. BengalEngineering and Science University,Shibpur711 103

(i) Civil Engineering,(ii) ElectricalEngineering(iii) MechanicalEngineering,(iv) MiningEngineering.

BE

11. B.M.S. CollegeofEngineering, Bangalore560 019

(i) Machine Design

BS

12. IndianSchoolof Mines,Dhanbad826 004

(i) Fuel & MineralEngineering (ii) MiningEngineering

IS

13. Instituteof Technology, BHU, Varanasi221 005(i) MetallurgicalEngineering, (ii) MiningEngineering

VN

14. Jadavpur University,Kolkata700 032

(i) ElectricalEngineering,(ii) Electronics & TelecommunicationEngineering,(iii) MechanicalEngineering (iv) Production Engineering

JU

15. MalnadCollegeofEngineering,Hassan573 201

(i) Civil Engineering

ML

16. Manipal Institute of Technology, Manipal 576 104

(i)Civil Engineering, (ii) Mechanical and Manufacturing EngineeringMI

17. Motilal Nehru NationalInstituteof Technology,Allahabad211 004

(i) AppliedMechanics(ii) Civil Engineering,(iii) ComputerScience and Engineering,(iv) ElectricalEngineering, (v) ElectronicsEngineering,(vi) MechanicalEngineering (vii) GIS Cell

MN

18. NationalInstituteofIndustrialEngineering,Mumbai400 087

(i) IndustrialEngineering

NI

19. NationalInstituteof Technology,Calicut - 673 601

(i)Civil Engineering, (ii) Electrical Engineering, (iii)Electronics & Communication Engineering,

(iv) Mechanical Engineering)

CL

2

7/28/2019 m.tech Brochure 2013 2014

7/48

Sl. No. Name of the Institute/University Code

20. NationalInstituteof Technology Karnataka, Surathkal575 025

(i)Applied Mechanics & Hydraulics (ii) Chemical Engineering, (iii) Civil Engineering,

(iv) Computer Engineering, (v) Electrical & Electronics Engineering, (vi) Humanities, Social Science & Mgt.

(vii) Mathematical & Computational Science, (viii) Mechanical Engineering, (ix) Metallurgical & Materials

Engineering, (x) Electronics & Communication Engineering

SK

21. NationalInstituteof Technology,Rourkela769 008

(i) CeramicEngineering,(ii) ChemicalEngineering,(iii) Civil Engineering,(iv) ComputerScience and Engineering, (v) ElectricalEngineering,

(vi) Electronics and Communication Engineering,(vii) MechanicalEngineering.

RK

22. NationalInstituteof Technology, Tiruchirappalli620 025(i ) Civil Engineering(ii) ComputerScience & Engineering(iii) Electrical and Electronics Engineering, (iv) MechanicalEngineering,(v) MetallurgicalEngineering (vi) ProductionEngineering

TR

23. NationalInstituteof Technology, Warangal506 004

(i) Civil Engineering. (ii) Electrical Engineering. (iii) Electronics & Communication Engineering,

(iv) MechanicalEngineering.

WR

24. PSG Collegeof Technology,Coimbatore641 004(i) ComputerScience & Engineering,(ii) Electrical & ElectronicsEngineering,

(iii) MechanicalEngineering, (iv) ProductionEngineering, (v) Textile Technology

PS

25. Shri G. S. Instituteof Technology and Science,Indore452 003

(i) ElectricalEngineering

GS

26. ShriJayachamarajendraCollegeofEngineering, Mysore570 006(i) Civil Engineering,(ii) Electronic and Communication,(iii) Instrumentation Technology,

(iv) MechanicalEngineering

SJ

27. University VisveswarayaCollegeofEngineering, Bangaluru560 056(i) Civil Engineering

UV

28. Visvesvaraya NationalInstituteof Technology, Nagpur440 011

(i) Civil Engineering (ii) ElectricalEngineering

VR

3

7/28/2019 m.tech Brochure 2013 2014

8/48

III.CODES FOR DEPARTMENTS OFFERING MASTER DEGREE PROGRAMMES AT VARIOUSINSTITUTIONS

Department/Centre Code Institution(s) Offering Master DegreeProgramme

AerospaceEngineering AE BG, BM*, KH, KN, MD,AU

AeronauticalEngineering AE AU

Agriculture and Food Engineering AG KH*

Alternate Hydro Energy Centre AH RR

AppliedMechanics AM DL, MD, MN

AppliedMechanics Hydraulics AM SK*

Architecture and Planning AR RR

Architecture and RegionalPlanning AP KH

Atmospheric & Oceanic Sciences (Centre) AS BG

AutomobileEngineering AU AU

BiomedicalEngineering BM BM

Bio Sciences & Bio Engineering BM BM

Biotechnology BT KH

Energy Studies (Centre) EN DL

PolymerScience & Engineering (Centre) PS DL

Centre of Studies in Resources Engineering SR BM

Centre forEducational Technology ET KH

ChemicalEngineering CH AU, BG, BM, DL, GW, KH, KN, MD, RK, RR, SK*,

CeramicEngineering CM RK

CivilEngineering CEAU, BE, BG*,BM*, CL*, DL*, GW*,KH*, KN*,MD*,

MI, ML, MN, RK*, RR*, SJ, SK*,TR*, UV, VR, WR*

ComputationalScience (SuperComputerEducation & Research Centre)

CP BG

Computer Engineering CS CL*,SK

ComputerScience & Engineering CS BG, BM, DL, GW, KH, KN, MD, MN, PS, RK, TR,

Cryogenic CR KH

Chemistry CY RR

Earthquake Engineering EQ RR*

Electrical & ElectronicsEngineering EE PS*,SK,TR

ElectricalCommunicationEngineering EC BG

ElectricalEngineering EE AU, BE, BG, BM*, CL*, DL, GS, JU*,KH*, KN,MD*, MN, RK, RR*, VR, WR

Electronics & Electrical Engineering EE GW

Electronics and Communication IL SJ

Electronics & CommunicationEngineering EC GW*, RK, SK*,WR*, CL

Electronics and Computer Engineering LC RR

Electronics & ElectricalCommunicationEngineering

ECKH*

Electronics & TelecommunicationEngineering EC JU*

Electronics Design and Technology (Centre) ED BG

4

7/28/2019 m.tech Brochure 2013 2014

9/48


ElectronicsEngineering EC AU, MN

Energy Science and Engineering EN BM

EnvironmentalEngineering and Management EM KN

EnvironmentalScience & Engineering EV

BM

Fuel & MineralEngineering FM IS

Earth Sciences GS BM

Earth Sciences PG BM

GIS Cell GI MN

HighVoltageEngineering HV BG

Humanities, Social Science & Mgt HU SK

Humanities and SocialSciences HS KH

Hydrology HY RR

Industrial and Management Engineering IM KN

IndustrialEngineering & OperationsResearch IO BM

IndustrialEngineering IE NI

IndustrialEngineering and Management IM KH

Industrial Tribology Machine Dynamics andMaintenance Engineering TR DL

Information and CommunicationEngineering IC AU

Instrumentation IN BG

Instrumentation Technology IN SJ

InstrumentationEngineering IE AU

Internet Science and Engineering IS BG

Laser Technology LS KN

Leather Technology LT AU

Machine Design MD BS

MaterialScience MS KH, KN

Materials and MetallurgicalEngineering MT KN

Mathematical and ComputationalSciences MC SK*

Mathematics MA DL, KH, MD

Mechanical and IndustrialEngineering ME RR

MechanicalEngineering ME AU, BE, BG, BM*, CL*, DL, JU*, GW*,KH*, KN,MD*, MN, PS*, RK*, SJ, SK*,TR*, WR

5

7/28/2019 m.tech Brochure 2013 2014

10/48


MechanicalManufacturing MM MI

Materials and Science and Technology ME CL

Metallurgical and MaterialsEngineering MT KH, SK*

Metallurgical and MaterialsEngineering MM MD

MetallurgicalEngineering & MaterialsScience MM BM*

MetallurgicalEngineering MT TR*, VN

MetallurgicalEngineering and Material Engineering MT KH, RR

MaterialsEngineering MT BG

M icroelectronicSystem ML BG

M iningEngineering MI BE, IS, KH, VN

NuclearEngineering and Technology NE KN

Nanotechnology NT RR

Ocean Engineering OE MD

Ocean Engineering and NavalArchitecture OE KH

Earth Sciences PG BM

Paper Technology PP RR

Physics PH DL, MD , RR

Physics and Meteorology PM KH*

ProductionEngineering PE JU*,PS*,TR*

Production Technology PT AU

Ranbir and Chitra Gupta Schoolof InfrastructureDesign & Management

ID KH

Reliability Engineering RE BM, KH

Rubber Technology RT KH

SchoolofInformation Technology IT KH

SignalProcessing SP BG

Systems and ControlEngineering SC BM

Systems Science and Automation SA BG

Textile Technology TX DL, PS

Water Resources Development WR RR

* Specializations have t o be indica ted while opting fo r the par t icu lar department. Code f o r the specializations isgiven along with the detailscorresponding to the particularinstitution(Depts. & Field ofSpecialization).

6

7/28/2019 m.tech Brochure 2013 2014

11/48

V. ELIGIBILITY CRITERIA

1. Only candidates (such as lecturers, readers, assistant professors, associateprofessors and professors)with a minimum of two-years teaching experience as full-time regular/permanent teachers of AICTEapproved Degree level Engineering Institutions, National Institutes of Technology (NITs) and NationalInstitutes of Technical Teachers Training and Research (NITTTRs) as on September 30, 2011 (Friday) areeligible to apply. Admissions to Master degree programme under QIP are open only to candidates with a

basicdegree inEngineering or Technology orArchitecture orsuch other qualification.

2. The candidate shouldsatisfy the minimumeligibility criteriaprescribed by the individual Department (and/or theInstitution) to whichadmissionissought.

3. Computer Programmers, Systems Programmers, Workshop Staffs, Guest Lecturers, Visiting Lecturers,Teaching Assistants, Ad-hoc/Contract or Part-time Teachers, Technical Assistants, Research Engineers,ScientificOfficers and other such categoriesofstaffare not eligible.

4. Teachers ofthe MajorQIPcenters are not eligible.

5. Teachers ofthe M inorQIPcentres are eligible to apply to Major QIP Centres.

6. Teachers of the minor QIP centres are permitted to apply for a field of specialization available in anotherminor QIP centre, which is not available in theirparent department on the specific recommendations of theDepartments and Institutes Head stating that a faculty in the particular specialization is required for theirInstitution.

V. SCHOLARSHIP AND CONTINGENCY GRANT

The candidatesadmitted for the Master degree programme under QIP will receive a sum of Rs. 4,000/-permonth as livingexpenditureallowance and a contingency grant ofRs. 3,000/-per annum fortwo years.

VI. CONDITIONS FOR ADMISSION

1. Admissionispossibleonly to the Institutionsand the Departmentslistedin the Informationbrochure.

2. The final admission of the candidate will be subject to the clearance and approval by the AdmissionWing (Section) of the concerned institution as per its rules and regulations in force at the timeofadmission.

3. The candidate, if selected,should be relieved to join the programme in time for the session to whichhe/she is

admitted.4. The candidate joining the Master degree programme under QIP on deputation would be entitled to receive

his/hersalary and allowances, whichmustbe paid by the parent institutionsponsoringhim/her.

5. Conditional recommendation by the Principal/Head of the Institution will not be accepted.

6. The Principal/Head of the Institution of a candidate who is selected for admission should ensure that thesponsorshipcertificateisproducedby the candidate at the timehe/she joins the course.

7. If a QIP scholar discontinues Master d e g r e e programme, t h e scholar has t o refund the

scholarship and contingency received to the AICTE through the QIPCentre, and the parent institution may seekrefundofthe salary and allowancespaid to himfor the periodhe/she attended the programme.

VII.INSTRUCTIONS FOR COMPLETING THE ON-LINE

APPLICATION

General Instructions

1. The candidateshould first register by clicking New Registration. An emailconfirming the registrationwill besent by assigning an application number and a password. The application number and the password arerequired for subsequent operations. Hence the candidate should remember them or keep t h e m at a safeplace.

2. Candidate can startfilling up the on-lineapplication by loggingin through View/Edit Application.

3. On-line application can be completed in one or more se ss ions by revisiting the website using the assignedapplicationnumberand password.

4. The candidateshould enter all requiredinformationcorrectly inallfieldsof the on-line application.

5. After filling the fields, the candidate can save the information inbetween by using the SAVE button. Thecandidate can edit data in any field till the final submission and printout is taken. The last date for on-linesubmissionofapplicationisOctober 31st 2012 (Wednesday).

7

7/28/2019 m.tech Brochure 2013 2014

12/48

Personal Information

6. For the Designation field, the candidate should choose one of the following designation codes from thecombo box. For designations not covered, the candidateshouldspecify the exact designation under the otherdesignationfield,failing whichhis / her applicationcannotbe considered.

Designation Code Designation Code Designation Code

Assistant Lecturer 1 SeniorLecturer 4 AssociateProfessor 7

AssociateLecturer 2 Reader 5 Professor 8

Lecturer 3 Assistant Professor 6 Other Designation 9

7. After completing the Name, Designation, Department and Address fields (using the pull-down menu) enterDate of Birth; Gender as Male or Female; the category by General, SC, ST, or OBC; put Yes if you

belong to Physically DisabledCategory and No if you do not; Marriedas Yes if you are married and No ifyou are single.

Educational Qualifications and Academic Data

8. During the process ofentering the applicationdetails,additionalsub-links are provided inappropriateplaces.

For example, while entering the overallperformance of the candidate under Educational Qualifications,there willbe a linkthrough which the candidate can furnish the semester wise / year wiseparticulars.

9. For filling Academic data and Additional qualification, if the absolute marks are awarded, then fill, e.g.650/800 where t h e total marks obtained is 650 out of a total of 800. If the Grade Point Average (GPA) isawarded, fill, e.g. 6.7/10 where 6.7 is GPA obtained on a scale of 10. If the candidate has failed in anysubject during any semesterexamination and cleared that subject in a latersemester, the marks obtained inthat subject should be added back to the semester in which it was supposed to have been cleared and thenthe total marks is to be calculated. Candidate should take the marks of all t h e semesters forCalculating the overall p e r c e nt a g e or CGPA (irrespective of the methodology adopted by theuniversity/college in awarding final class/division).

10. During the entry of details like detailed semester wise / year wise information, detailed teaching experienceetc., the candidatehas to enter the detailsfor whichdocuments ofproof are to be attached.

Institute and Department Preferences

11. A candidate can apply to a maximum of three institutions and a maximum of two departments in each of thechosen Institutes (i.e.,maximumof totalsix optionsonly).

12. Select the Institution by using the pull-down-menu as per the order of your preference. Then e n t e r theprogramme code desired asperpreferredchoices with validcode.

13. Appropriate list of validcodes can be viewedusing linksprovided. The code contains 6 characters; the first2 alphabets identify the Institute, the next 2 alphabets identify the department within the Institute and thelast

2 digits identify the fi eld of specialization. For exampl e, a code R R M E 0 1 represents a particular field ofSpecialization in the Department ofMechanical and Industrial Engineering,IIT Roorkee.

Preview of Application

14. Once the completedetails about the candidate are enteredand saved, the on-lineapplication can be printed.To preview the completed application, the candidate can print a draft copy of the application. He shoul dcheck t h e completeness and correctness of the information; if needed, corrections can also be made beforethe finalsubmission.

Final Confirmations and Printouts

15. After finalizing the contents of the application, the candidate should invoke the FINAL version ofthe application. Click here forprinting the FINAL version of the application. Once the FINAL version optionis chosen, the candidate will not be allowed to modify the contents of the application. TheFINALversion should be printed only on A4 sheet with the print orientationas portrait, and marginsas 20 mm (left, right, top and bottom). The print report contains multiple copies of the application. The firstcopy corresponds to the copy for IISc Bangalore QIP and one copy each for the preference code related tothe number of institutions and departments, a candidate proposes to apply to.

8

7/28/2019 m.tech Brochure 2013 2014

13/48

16. The following Table indicates the number ofprintouts to be taken and the number of sets of enclosuresrequiredas related to the number of institutions and departments a candidate proposes to apply.

No. of Institutions

chosenTotal No. of Departments (streamsor

specialisations) chosenNo. of applications to be printed and

No. of sets of enclosuresrequired1 1 2

1 2 3

2 2 3

2 3 42 4 5

3 3 4

3 4 5

3 5 6

3 6 7

17. In each copy, the candidateshouldaffix his/herrecent stamp-size photographin the spaceprovided.

18. The candidateshould thoroughly verify the contents ofthe printeddocuments and sign at the appropriateplaces.

19. In the Forwarding Note of the Application Form, the space provided for the Name of the Candidate andTeaching Experiencemust be duly filled in and signed by the Principal / Head of the Institutionalong with

the Office Seal.20. Applicationssubmitted without signaturesof the candidate and the appropriateauthorities withseal, and/or wi th ou t

the requiredenclosureswill automatically be deemed invalid.

VIII. APPLICATION FEE

A demand draft forRs 500/-forGeneral/OBCCategory and Rs. 250/-forSC/ST/PD candidates, drawn in favorof

Registrar IISc, payable a t Bangalore shoul d b e attached with t he form marked as, Copy forPrincipal Coordinator QIP, CCE IIScBangalore on top of t h e form. Candidate should write their applicationnumber, name, address and courses applied on back side of the DD. Candidate should note that the feepaidother than DD i.e., by IPO, cheques, etc. are not acceptable. Applicationfees once paid cannotbe refunded.

IX. CHECKLIST FOR EACH COPY OF THE APPLICATION FORM

In Forwarding Note, the candidate should check his/her Name, years and months of experience,

signature (Head of Institution), date, and office seal.

Photographs:Affix recent stamp sizephotographs at spaceprovided on allprintedcopiesofApplicationFormsincluding the Copy for Principal Coordinator.

Signatures of the Applicant:The candidateshouldsigninall the printouts at relevantplaces.

Candidateshouldensure that all information are properly filledin and requirednumberofprint-outs taken andallcopies are to be send in a singleenvelope to the PrincipalCoordinatorQIP,IISc Bangalore.

Enclosures

1. ApplicationFee: DD of Rs. 500/- for General/OBC Category and Rs . 250/- for SC/ST/PD candidates should beenclosed with the copy of the Principal Coordinator QIP form only.

2. Candidatesbelonging to SC, ST orOBC category, must attach an attested copy of the caste certificate issuedbya competent authority asper the Government of India rules.

3. Physically Disabled candidates must attach a copy of the certifi cate issued by a competentauthoritya s per Government of India rules.

4. Encloseattested copiesofall the relevant certificates

Certificates of the QualifyingExamination and other Degrees

Age proofingCertificate

Mark Lists ofallyears/semesters ofqualifyingexamination (marksheets clearlyshowingtotalmarksobtainedout ofmaximummarksaccordingtosemester oryear)

TeachingExperience

Industrial/ResearchExperienceCertificates. Certificates ofShort Term Coursesattended.

AllResearchPublications.

Any otherAcademicQualifications/Awardsetc.

9

7/28/2019 m.tech Brochure 2013 2014

14/48

X. INSTRUCTIONS FOR DESPATCHING

1. For the convenience of the candidate, a check list is alsoprinted as the last page. One can use this list andensure the completeness of application. Once com ple ted , the entire bunch (allcopies) is to be dispatched tothe PrincipalCoordinatorQIP,IISc Bangalorealong with the DD ofthe relevant amount.

2. Before mailing the completed forms, please ensure that each copy of application form and its

enclosures are properly fastened with a tag separately at the left-hand top corner.

3. In case, your applications are submitted by your sponsor, it is your responsibility to ensure that theapplication is forwarded to the OfficeofThe PrincipalCoordinatorQIP, CCE, IISc Bangalore well within thetime so as to reach on or before 09 th November 2012 (Friday). Applications received after this

date will not be considered.

4. In case, the candidate has forgotten the password, the candidateshouldsend an email (using the email IDmentioned in the on-line application) to [email protected] furnishing the following details: Application

Number, Name of the Candidate, Date of Birth, Address for Correspondence, Gender and Category. Afterverification, the candidatewillbe informed the password through email only.

5. The requisite numberof the print-outs of the application submitted on-line, along with the required number ofenclosures, as mentioned, should be sent to The Principal Coordinator QIP, Quality ImprovementProgramme Centre, CCE, IISc Bangalore, Bangalore 560 012, preferably by Speed Post or CourierService, to reach the Officeon or before November 09

th, 2012 (Friday). Applicationsreceived after this

date will not be considered: All the completed forms along with enclosures should be sent only tothe Principal Coordinator QIP, CCE, IISc Bangalore. For any clarification contact: Phone: +91- 080- 22932491; Fax: +91- 080-2360 0911; Email:[email protected].

XI. LAST DATE

The last date for on-line submission ofapplication is 31st October 2012 (Wednesday). Print-outs of the

on- line filled-in application, including the Copy for Principal Coordinator, with its enclosures,

complete in all respect should reach The Principal Coordinator QIP, Quality Improvement

Programme Centre, CCE, Indian Institute of Science Bangalore, Bangalore 560 012, on or

before 09th

November 2012 (Friday). Applicationsreceived after this date will not be considered.

XII. PROCEDURE FOR ADMISSIONS UNDER QIP

1. Short-listingof the candidateswill be done f irst by the officeof the PrincipalCoordinator, then finally at theDepartment/Institute concerned. Interview letters will be sent to the short-listed candidates by theDepartment/instituteconcerned.

2. Interviews will be conducted in the Departments at the individual Institutions. Schedule of interviews isprovided in the next Section. Please note that No TA/DA will be paid to candidates for attending theinterviews.

3. Selections will be madeby the National QIP Coordination Committeebased on the recommendations ofvariousinstitutions.

4. Final Results willbe available at the websitewww.qip.cce.iisc.ernet.in.

5. Admission letters will be issued to the selected candidates by the respective QIP Centres or Academicsectionofthe institutionsoffering the admission.

10
mailto:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/http://www.qip.cce.iisc.ernet.in/mailto:[email protected]:[email protected]

7/28/2019 m.tech Brochure 2013 2014

15/48

XIII. SCHEDULE OF INTERVIEWS FOR ADMISSION TO MASTER DEGREE PROGRAMMES UNDER QIP

The followingdates of interview at variousQIPCentres, finalized by NationalQIPCoordinationCommittee,are final and cannotbe altered under an y circumstances.

S.No InstituteInterview

DateDay

1 NationalInstituteof Technology,Calicut 16-01-13 Wednesday

2 NationalInstituteof Technology, Tiruchirappalli 17-01-13 Thursday3 MalnadCollegeofEngineering, Hassan 18-01-13 Friday

4 PSG Collegeof Technology,Coimbatore 21-01-13 Monday

5 Anna University,Chennai 23-01-13 Wednesday

6 IIT Madras 24-01-13 Thursday

7 NationalInstituteof Technology, Warangal 25-01-13 Friday

8 SJ CollegeofEngineering,Mysore 28-01-13 Monday

9 BMS CollegeofEngineering, Bangalore 29-01-13 Tuesday

10 UVCE, Bangalore 30-01-13 Wednesday

11 IISc Bangalore 31-01-13 Thursday

12 Manipal Institute of Technology, Manipal 01-02-13 Friday

13 NationalInstituteof Technology Surathkal,Karnataka 04-02-13 Monday

14 Visvesvaraya NationalInstituteof Technology, Nagpur 05-02-13 Tuesday

15 NationalInstituteofIndustrialEngineering,Mumbai 06-02-13 Wednesday

16 IIT Bombay 07-02-13 Thursday

17 SGS Instituteof Technology & Science, Indore 08-02-13 Friday

18 NationalInstituteof Technology,Rourkela 11-02-13 Monday

19 IIT Guwahati 12-02-13 Tuesday

20 IIT Kharagpur 13-02-13 Wednesday

21 IndianSchoolofM ines, Dhanbad 14-02-13 Thursday

22 Jadavpur University,Kolkata 15-02-13 Friday

23 BengalEngineering and Science University,Shibpur 18-02-13 Monday

24 IIT Roorkee 19-02-13 Tuesday

25 Instituteof Technology, BHU, Varanasi 20-02-13 Wednesday

26 Motilal Nehru NationalInstituteof Technology,Allahabad 21-02-13 Thursday

27 IIT Kanpur 22-02-13 Friday

28 IIT Delhi 25-02-13 Monday

XIV. DEPARTMENTS AND FIELDS OF SPECIALISATION AT VARIOUSINSTITUTIONS

The departments offeringadmission to Master degree (2 years) programmes at various institutions and thefieldsofspecializationin the departments are listed in the Tablesgivenbelow.

Specializations mentioned indicate only areas of interest, and are not exhaustive. There ma y not be admissionsopen to all the areasindicated, and candidates,if foundsuitable, may be admitted to relatedareasalso.

The detailsgiven are subject to variation and change from time-to-time and only those operating in the respective

institutions at the time of actual admissions are applicable. Candidates desirous of more information such as foraccommodation,feestructure etc. may write/contact to the QIPCoordinatorof the individual institution or visit theirwebsite.

11

7/28/2019 m.tech Brochure 2013 2014

16/48

1. IndianInstitute ofScience Bangalore - BG

In allcases, the minimum eligibility issecond class orequivalent grade point in the qualifyingexamination or Bachelorsdegree inScience with

Physics and Mathematics in the curriculum followed by the professionaldiplomaas relevant to individualdepartments.

Code Department Fields of Specialization Minimum Qualification

BGAE01AerospaceEngineering

Structures, Aerodynamics, Propulsion, Control andGuidanceof Aircraft,Rockets and Spacecraft.

BE/B.Tech. orequivalent degree in Aeronautical,Chemical, Civil,Mechanical Engineering,Instrumentation & Control, Electrical,Electronics, OR Communication or B.Sc. or

equivalent degree followed by AMIE/AMAeSI/ AMIIChE/ IETE, GRAD.

BGCH01 ChemicalEngineering

Biochemical Engineering; Catalysis, Colloids, Complex

Fluids; Environmental Pollution, Fuel cells, Gas Hydrates,Granular Flow, Microfluidics, Modeling of Diseases,Molecular modeling, process modeling, Nano structures,Nano architectures, Optimization & Control , Polymer

degradation, Self assembled systems, Simulation techniques,Solar energy, Suspensions, Super Critical fluids, TheoreticalBiology, Water Treatment.

BE/B.Tech orequivalent degree in Chemical

Engineering or BSc or equivalent degree withMathematics as one of the subjects followed by

AMIE in Chemical Engineering or AMIIChE

BGCE01

Civil

Engineering**

GeotechnicalEngineering BE/BTech or equivalent degree inCivil Engineeringor B.Sc. or equivalent degree followed by AMIEin Civil Engineering.

**Each of the 3 specialization conductedby Civil Engineering department would constitutea separate preference.

B.E./B.Tech in any discipline

BGCE02 Water Resources & EnvironmentalEngineering

BGCE03S

tructuralEngineeringBGCE04 Transportation and InfrastructureEngineering

BGCS01

ComputerScienceand Engineering

Theoretical ComputerScience:

Design of Algorithms, Coding theory, Cryptography, FormalVerification, Graph theory, Logic, RandomizedAlgorithms,Computational Geometry, Computational Topology.

Systems and Software:

Compilers, ComputerArchitecture, ComputerNetworks,Databases, Distributed Computing, Embedded systems,Energy-Aware Computing, Mobile & wireless systems,Operating Systems, Real-Time OS, Storage Systems,Systems Security, Visualization, Graphics,Programm ingLanguages.

Automation:Auctions and Mechanism design, Bioinformatics, DataMining,ElectronicCommerce, Game Theory, Intelligent

agents, Machine Learning, Pattern recognition,Reinforcement Learning, Stochastic Control andOptimization, Stochastic Simulation.

BE/B.Tech orequivalent degree in Computer

Science and / or Engineering (CS) or

Information Technology (CS) or Information

Science and Engineering (CS).

BGSA01

Systems Science

and Automation

(Jointly conductedby department ofElectricalEngg.

& Computer

Science andAutomation)

SignalProcessing,Pattern Recognition, Data Mining,NeuralNetworks, Image Processing, SensorNetworks,

Computer Vision,Medical and Document Image Analysisand Recognition, Speech Processing, Multimedia and

Real TimeSystems.

BE/B.Tech. orequivalent degree in Computer

Science/ Engineering, Electrical,Electronics,

Communication, Instrumentation, Mechanical

orChemical Engineering; OR B.Sc. orequivalent

degree followed by AMIE in Electrical,

Electronics and Communication, Mechanical or

Chemical Engineering, GRAD.IETE, AMIChE,

Candidates should have done a formalcourse

inProgramm ingin C language.

BGEC01Electrical

Communication Engineering

Communication and Networking, Microelectronics,Microwaves,Photonics, Signa l Processing.

BE/B.Tech. orequivalent degree in Electronics &

Communication (EC), Telecommunication (EC).,

Electronics (EC) or Electrical Engineering

with specialization in Electronics &

Communication (EC), OR B.Sc. or equivalent

degree followedby GRAD. IETE (EC), AMIE in

Electronics & Communication (EC) or Wireless

Communication (EC).

BGEE01 ElectricalEngineering

Power Systems, HighVoltageEngineering,PowerElectronics

BE/B.Tech. or equivalent degree in Electrical, or

Electrical & Electronics or B . Sc . or Equivalent

degree followed by AMIE inElectrical.

BGME01MechanicalEngineering

Internal Combustion Engines and Technical Acoustics;Material Science, Mechanical Systems Analysis andDesign; Thermal Science, Fluid Mechanics and SolidMechanics, MEMS, Bio- mechanics.

BE/B.Tech orequivalent degree in Mechanical

Engineering or B.Sc. equivalent degree with

Mathematics followed by AMIE in Mechanical

Engineering, or AMIMechE(I)

12

7/28/2019 m.tech Brochure 2013 2014

17/48


BGMT01 MaterialsEngineering

Mechanical Behavior of Metals, Ceramics, Polymers Glasses

and Thin Films, Biomaterials Engineering, Polymer

Nanocomposites, Organic Electronics Sensors. Mineral

Processing, Biohydrometallurgy, Extractive Metallurgy, Process

Modeling Physical Metallurgy, Phase Stability and

Transformation, Diffusion, Solidification.

BE/B.Tech or equivalent degree in

Metallurgy / MechanicalEngineering / Chemical

Engineering / Ceramic Engineering / Technology

or B.Sc. or equivalent degree with Mathematics,

Physics & Chemistry followed by AMIE in

Metallurgical Engineering or AMIIM.

BGML01

MicroelectronicSystem (Jointly

conducted by,

ElectricalCommunication

Engineering &

Centre for

Electronics

Design &Technology)

Semi-custom VLSI Design-FPGA, ASIC, Sub micron

CMOS D e v i c e Tech nol og y; Analog and RF circuit

design, MEMS .

BE/B.Tech orequivalent degree inElectrical (EE),

Electronics and Communication (EC), Computer

Science (CS), Instrumentation with Electronics (IN).

OR

B.Sc or equivalent degree followed by AMIETE

(EC) or AMIE in Electrical (EE) or Electronics and

Communication (EC).

BGSP01

SignalProcessing

(Jointlyconducted byElect. Engg &

ElectricalCommunication

Engg.)

MedicalSignal,Speech, Audio and Image/video

Processing, Compression, Array Processing, DSP

Architectures, Pattern Recognition, Biomedical

Imaging, Bio-inspiredSignalProcessing.

BE/B.Tech. orequivalent degree in Electrical,

Electronics and Communication OR B.Sc. or

equivalent degree followed by GRAD. IETE or

AMIE in Electrical or Electronics and

Communication.

BGED01

Electronics

DesignandTechnology(Centre for

Electronics Designand Technology)

Communication Networks, Embedded Systems,

Power Conversion, VLSI Design, Electronic

Packaging,Instrumentation.

BE/B.Tech. orequivalent degree in Electronicsas

one of the subjects or B.Sc. or equivalent followed

by AMIE a relevant area of specialization OR

M.Sc. in Physics with Electronics

as the special subject. (M.Sc. degree or

equivalent degree holders should possess 2

years experience inElectronic Hardware)

BGIN01 InstrumentationAnalytical Instrumentation, ElectronicInstrumentation, Laser and Optical Instrumentation,

Solar Energy and Thermal Instrumentation, Vacuum and

Thin Films.

M.Sc. orequivalent degree with specialization in

Instrumentation / Electronics / equivalent or B.E. /

B.Tech. orequivalent degree inInstrumentation/

Instrumentation & ControlEngineering or

Electronics & Instrumentation / Electronics.

BGCP01

ComputationalScience

(SupercomputerEducation& Research

Centre)

Multi-disciplinary program addressing, High

Performance Computing, Computational issu e s in

large scale problem solving, Simulation in Science and

Engineering, Numerical Techniques and Algorithms,

Computational Biology.

BE/B.Tech. orequivalent degree in any discipline

M.Sc. orequivalent degree in any discipline

M.C.A.

In allcasesstrongmathematical andprogramm ing

backgroundisrequired.

BGAS01Centre for

Atmospheric &

Oceanic

Sciences

Atmospheric Sciences , Oceanic Sciences

BE/B.Tech. orequivalent degree in Aerospace Civil,

Chemical, Electronics & Communication, Electrical,Mechanical Engineering, Engineering Sciences or

M.Sc or equivalent degree in Physical Sciences.

13

7/28/2019 m.tech Brochure 2013 2014

18/48

2. IndianInstitute ofTechnologyBombay - BM

In all cases, the minimum eligibility is a First Class or equivalent (Min.60%) Masters Degree in Engineering/Technology (55% for SC/ST) OR a First Class

or equivalent (Min. 60%) Masters Degree in Science (55% for SC/ST) or a First Class or equivalent (Min.60%) in Bachelors Degree in

Engineering/Technology (55% for SC/ST).


BMAE01

Aerospace

Engineering

Aerodynamics AE, ME, CE

Bachelors degree in Aerospace, Mechanical, Civil,

Electrical/ Electronics or its equivalentBMAE02 Dynamics and Control AE, EE, EC

BMAE03 AerospacePropulsion AE, ME

BMAE04 AerospaceStructures AE, ME, CE

BMCH01

Chemical

Engineering

Research Areas:

1. ProcessSystems Engineering:

Process Simulations, Optimizations, Process Integration and Scheduling, Energy

Conservation and Optimal Resource Management, Artificial Intelligence and

Mathematical Modeling, Multi-scale Modeling. Systems Identification and Process

Safety Analysis, Nonlinearcontrol,fault diagnosis.

2. Biotechnology &Bio-Systems Engineering:

Metabolic & Genetic Engineering, Bio-separations, Bioinformatics,Systems Biology, Drug Discovery, Enzymology, Bioprocess Development,

Vermiculture for Waste Management, Dehydration of Food Systems,

Controlled Atmosphere Storage and Process Development ofFood Systems.

3. Materials Engineering:

Polymer materials, Polymer Reaction Engineering, Polymer Processing,

Polymer Physics. Polyurethane, Rubber, Polymer Rheology, Ceramics,

Polymers, Biomaterials, Drug Delivery Food Engineering Microscopy, Nano-

composites,Statistical Thermodynamics and SupercriticalFluids.

4. Catalysis & Reaction Engineering:

Catalysis, Multiphase Reaction, Bio-reaction Engineering and Reactor

Modelin g,Process intensification & reactivedistillation.

5. Transport, Colloids & InterfaceScience:

Fluidization, Granularflows, PowderMixi ng, Membrane Separations, Rheology of

Complex Fluids, Colloids, Sol-gels, Emulsions & Foams, Paints and Coatings,

Micro-structural Engineering, Acrosols, Electro-hydrodynamics. Fluid

Mechanics & Stability, Computational Fluid Dynamics, Heat & Mass transfer,

Porous media, and Surfactants.

6.Energy and Environment:

Climate change, Coal Gasification, Energy Integration, Green Engineering,

Renewable Resources, Waste Management, Pollution Control, Air Pollution

Prediction & Control and Vermicu lture.

Bachelors degree in

Chemical Engineering

OR equivalent

BMCE01

Civil Engineering(Code no. of the

specialization to

be indicatedin

the data sheet)

TransportationSystems Engineering B.E/B.Tech. inCivil Engineering orequivalent.

FirstClass or equivalent (60%) inqualifyingdegree (55%

for SC/ST) isessentialfor generaleligibility.

BMCE02 GeotechnicalEngineering

BMCE03 Water Resources Engineering

BMCE04 StructuralEngineering

BMCE05 Remote Sensing

BMCS01Computer

Science and

Engineering

B.E./B.Tech. in CS&E withFirst Classor,

MCA/B.E/B.Tech in any branch with valid CS GATE

score

14

7/28/2019 m.tech Brochure 2013 2014

19/48


BMEE01

ElectricalEngineering

Communication Engineering: Bachelors degree

(B.E/B.Tech.) in Computer Science and

Engineering, Electrical Engineering, Electronics

Engineering, Telecommunications Engineering,Engineering Physics OR Masters Degree (Master

of Science) in Physics (with specialization in

Electronics), with specialization in Electronics),

Electronic Sciences

For general category students and /or for students where

no concession in academic performance is called for, the

First Class/60% in the qualifying degree examination as

the eligibility requires meeting

ANY ONE of the following criteria :

1. a minimum of 60 percent marks in the final academic yearof the programme

2 a minimum of 0 percent marks in aggregate or as specifiedby the university (any of the them)

3. a first class as specified by the university

4. a minimum CPI of 6.0 on the scale of 10; withcorresponding proportional requirements when the scales

are other than on 10, (for example, 4.8 on a scale of 8)

For students from the SC/ST category, the corresponding

criteria are:

1. a minimum of 55 percent marks in the final academic yearof the programme.

2. a minimum of 55 percent marks in aggregate or as specifiedby the university (any one of them)

3. a first class as specified by the university

4. a minimum CPI of 5.5 on the scale of 10; withcorresponding proportional requirements when the scales

are other than on 10, (for example, 4.4 on a scale of 8)

BMEE02

Control and Computing: Bachelors degree(B.E/B.Tech) in Computer Science and

Engineering, Electrical Engineering, Electronics

Engineering, Telecommunication Engineering,

Instrumentation Engineering, Engineering

Physics, Aeronautical/Aerospace Engineering OR

Masters Degree (Master of Science) in Physics

and Mathematics.

BMEE03

Power Electronics and Power Systems:

Bachelors degree .E/B.Tech.) in Computer

Science and Engineering, Electrical

Engineering, Electronics Engineering,

Telecommunications Engineering,


BMEE04

Microelectronics: Bachelors degree

(B.E/B.Tech.) in computer Science and

Engineering, Electrical Engineering,

Electronics Engineering,

Telecommunications Engineering


Physics, Materials Science & Engineering

OR Masters Degree (Master of Science) in

Physics, Electronic Sciences.

BMEE05

Electronic Systems: Bachelors degree

(B.E/B.Tech.) Biomedical Engineering

Electrical Engineering, Electronics

Engineering ecommunications Engineering


Physics, OR Masters Degree (Master of

Science) in Physics (with Specialization in

Electronics), Electronic Sciences.

BMME01

MechanicalEngineering

Thermal and FluidsEngineering

First class in B.E/B.Tech or Equivalent Degree (with60% Minimum; 55% for SC/ST) in Mechanical

Engineering/ Aerospace Engineering/ Chemical

Engineering.

BMME02 DesignEngineeringFirst class in B.E/B.Tech. or Equivalent Degree (with60% Minimum; 55% for SC/ST) in Mechanical

Engineering/Aerospace Engineering

BMME03 ManufacturingEngineeringFirst class in B.E/B.Tech. or Equivalent Degree (with60% minimum; 55% for SC/ST) in Mechanical/

Production/ M/c. Tool/ Industrial Engineering.

BMMM01Metallurgical

EngineeringandMaterialsScience

MaterialsScience and Engineering

Bachelors Degree in Metallurgical ceramic, Chemical,Electrical, Electronics, Electro-chemical, Mechanical,Engineering Physics or M.Sc. in Chemistry, Physics orMaterialsScience or M.Sc. AppliedPhysics.

BMMM02 Process MetallurgyBachelors Degree in Metallurgical Chemical,Electrochemical, Mechanical Engineering, MaterialsScience, Production Engineering.

15

7/28/2019 m.tech Brochure 2013 2014

20/48

7/28/2019 m.tech Brochure 2013 2014

21/48

Code Department Fields of Specialization MinimumQualification

BMIO01 IndustrialEngineeringand Operations

Research

The specific problems of research interests include: production planning,scheduling and control systems; distribution and service systems;industrial scheduling, facilities planning, project management, qualitymanagement, materials management and productivity management;operations planning and control related to CMS, MRP, ERP, flexibleassembly, FMS, JIT; Supply chain analysis, reverse logistics, closed-loopsupply chains and RFID applications,product variety management.

Operations Research applications in management of technology and resourceallocation; convex optimization; mixed-integer programm ing; Markov

decisionprocesses; optimal control in deterministic and stochastic systems;(differential) game theory; applications of game theory; modeling andsimulation of supply chains, manufacturing and service systems; theoryand applications of distributed and hybrid simulations, discrete event

and system dynamics simulations; applied stochastic models; schedulingand control of railways and other transport operations; time tabling ofservices, crew and vehiclescheduling for transport operations; optimization

and design problems arising from e-commerce, including auctions andmechanism design for electronicexchanges; risk analysis and contractdesign; revenue management; quantitative models for financialengineering.

Theory and applicationsof neuralnets and fuzzy systems in manufacturing andmanagement; development and applications of modern informationsystems for managing manufacturing, supply chain and service

organizations.

The IEORprogramme is unique in its contemporary flavor, with new courses

in Financial Engineering, Supply Chain Management, Game Theory,Markov decision process, System Dynamics, Neural Networks and FuzzyLogic,Services Management, Manufacturing systems to name a few.

The programme is equally in background building, with updated

courses in optimization, stochastic models, simulation, & knowledge

based systems.

Candidates having a

first class Bachelor's

degree in any branchof Engineering withvalid GATE Score inany discipline are

eligible to apply.

BMSC01 Systems & ControlEngineering

Large scale systems, system reduction, nuclear reactor control, sliding mode control

(continuous & discrete), power systems stability & control, modeling, control &

implementation of smart structures, space launch vehicles stability & control, gas

turbines stability & control, flexible manipulators, stability & control of multirate

output feedback based control (POF/FOS).

Robust stability and control especially using quantitative feedback theory (QFT)

techniques, nonlinear system analysis and control and reliable computing using

interval analysis techniques.

Optimal control, constrained and optimization based control, in particular, stochastic

model-predictive/receding-horizon control.

Nonlinear and adaptive control, geometric mechanics, Lagrangian and Hamiltgonian

mechanics

Cooperative control of multi-agent systems, resource allocation, team theory and its

application, game theory, decentralized control, cooperative and network control.

Reconfigurable hardware, embedded control systems, robotic path planning

algorithms, hardware/software codesign.

Switched and hybrid systems, control under communication and computation

constraints; stochastic control; applications of stochastic process in engineering

systems.

Candidates having a

Bachelors Degree inAeronautical/Aerospace

/Chemical/Electrical/

Electronics

/Instrumentation/

Mechanical/Metallurgical

Engineering.

Candidates should

have undergone a basiccourse in classical

control at theirundergraduate level &also involved inteaching coursesrelated to Systems &Control in theircollege.

BMES01 Earth Sciences

Geoexploration: (GS)

The Programme is structured such that the students can learn

various aspects of mineral, petroleum and groundwater

exploration. It offers wide range in courses in exploration Well

Logging, Basin Analysis, Marine Mineral Resources,

Groundwater Hydrology, Environmental Geology and

Hydrogechemisty.

Candidates with first class or 60%

marks (55% marks for SC/ST) in Master

degree orequivalent in Geology/ Applied

Geology/ Geophysics Geochemistry with

in valid GATE score in Geology &

Geophysics are eligiblefor admission.

BMES02 Earth Sciences

Petroleum Geoscience: (PG)

This Specialization is introduced from July 2007, it prepares

graduates for a career in petroleum exploration and

development. The course provides advanced skills in

seismic interpretation, basin analysis and applied

micropaleontology, sequence stratigraphy, reservoir

sedimentology, petrophysics, wire line logging tools and data

interpretation using workstations and software as used in the

industry.

Candidates having first class or 60%

marks (55% marks for SC/ST) in Master

degree or equivalent in Geology /

Applied Geology / Geophysics / Applied

Geophysics with valid GATE score inGeology & Geophysics are eligible for

admission.

17

7/28/2019 m.tech Brochure 2013 2014

22/48


BMCSR01 Centre of StudiesinResources

Engineering

Remote Sensing and GIS applications, Surface and

ground water resources, terrain evaluation, Land

useplanning, Mineral and hydrocarbon exploration,

Glacier, Snow and avalanche studies, Hazards of

landslide, Drought and desertification, Marine and

coastal environmental studies, Atmospheric remote

sensing, Development of tools and techniques of

spatial data processing, Digital image processing,

Stereo Image analysis and digital cartography,

Microwave remote sensing, Global Positioning

Systems, Geographic information Systems and

Science, Spatial Data Mining, ICTs in Agriculture

and Rural Development.

Candidates with first class or 60% marks (55%

marks for SC/ST) in Bachelor Degree in

Engineering , Master degree in Science with the

valid GATE score in any of the followingpapers are

eligiblefor admission to thisprogramme.

Agricultural Engineering.

Civil Engineering.

Computer Science & Engineering.

Electronic & Communication Engineering.

Electrical Engineering

Geology & Geophysics

Information Technology

Mathematics

MiningEngineering

Physics

Environment Engineering/ Science

Architecture

18

7/28/2019 m.tech Brochure 2013 2014

23/48

7/28/2019 m.tech Brochure 2013 2014

24/48

4. IndianInstitute ofTechnology Guwahati -GW

Relaxationof SC/ST/PD candidates: Eligibility criteriawillbe relaxed by 5% inpercent marks or 0.5 point inCPIinallcases.

Code Department Fields of specialization Minimum Qualification

GWCH01

ChemicalEngineering

Petroleum Refinery Engineering Bachelor Degree in Engineering / Technology inan appropriate area (having Mass Transfer, Heat

Transfer, Fluid Mechanics, Thermodynamics,

Reaction Engineering & Process Control as

subjects in UG.) with minimum CPI of 6.5/10 or60% or First Class.

GWCH02Material Science & Technology

GWCE01

Civil Engineering

StructuralEngineering

Bachelors degree in Engineering/

Technology in an appropriate area with a

minimum CPI of 6.5/10 or 60% marks or

First Class.

GWCE02 Water Resources EngineeringandManagement

GWCE03 Geo-technicalEngineering

GWCE04 EnvironmentalEngineering

GWCE05 TransportationSystems Engineering

GWCE06Infrastructure Engineering & Management

GWCS01ComputerScience &

Engineering ComputerScience & Engineering

Bachelors degree in Engineering/ Technology

or equivalent in an appropriate area or

M . S c .(Computer Science/Information

Technology) or M C A from a recognized

Institution with a minimum CPI of 6.5/10 or

60% marks or First Class.

GWEE01

Electronics & Electrical

Engineering.

SignalProcessingBachelors degree in Electrical/ Electronics

Engineering or Equivalent or M.Sc.

(Electronics) with a minimum CPI of 6.5 /

10 or 60% marks or First Class.

GWEE02 VLSI

GWEE03 Communication En gineering

GWEE04 Applied Control

GWME01


Fluids and ThermalEngineeringBachelorsdegree in Engineering/ Technology

in an appropriate area with a minimum CPI

of 6.5/10 or 60% marks or First Class.GWME02 Machine Design

GWME03 ComputerAssistedManufacturing

GWME04 Computational Mechanics

20

7/28/2019 m.tech Brochure 2013 2014

25/48

5. IndianInstitute ofTechnology Kanpur - KN

Foreligibility to the M Tech programme, one is required to have passed the qualifyingexamination,i.e., B. Tech./B. E. or M. Sc. in

the appropriatearea .


KNAE01 AerospaceEngineering

Aerodynamics,Flight Mechanics,Propulsion,Structures.Degree inAeronautical/ Aerospace,Mechanical,Civil, Chemical, or NavalArchitecture Engg., Electronics

KNCH01Chemical

Engineering

Transport Phenomena, Chemical Reaction Engineering,

Applied Kinetics and Catalysis, Thermodynamics,Membrane Separation Processes, Process SystemsDevelopment, Computer Aided Design, Optimizationand Control, Petroleum Engineering, Pulp and PaperTech., Polymer Science and Engineering, PollutionControl, Unconventional Energy Resources, Safety andReliability, Dynamics of Nonlinear Systems, ZeoliteCatalysis, Colloids and Interface Engineering, CFD,Rheology, Non-Newtonian Fluid Mechanics,Nanotechnology, NumericalMethodsfor Engineers,Mathematical Methods in Chemical Engineering, Modelingand Simulation in Chemical Engineering, ComputationalBiology and Bioinformatics, Modeling and Simulation ofSeparation Processes, Molecular Modeling, TissueEngineering.

First classDegree inChemical Engg. orequivalent

KNCE01

Civil Engineering(Code No. of the

specialization tobe indicated inthe Data Sheet)

Engineering Geo-sciences (Code :05)

a) ForEngineering Geosciences, B.Tech./ B.E.

degree in Civil Engineering/ M.Sc. degreein Earth Science streams, M.Sc., degreein other science streams must havemathematics as one of the subjects at B.Sc.level.

b) For Geoinformatics, B.Tech./B.E. in Civil/Mining/Electrical/Computer Science/

Electronics Engineering./ InformationTechnology or M.Sc. degree in EarthScience streams/ Geography/Mathematics/

Environmental Sciences. Candidateswith M.Sc. must have mathematics as oneof the subjects at B.Sc. level

c) For Geotechnical Engineering, B.Tech./B.E.degree inCivil Engineering.

d) For Structural Engineering, B.Tech./B.E.

degree in Civil Engineering and somecandidates with Bachelors degree inArchitecture, Building Construction andallied subjects may also be considered.

e) For T r a n s p o r t a t i o n Engineering,

B.Tech. / B.E. degree inCivil/ Mechanical

/AerospaceEngineering.

f) For Hydraulics and Water ResourcesEngineering, B.Tech./B.E. degree in

Civil/Agriculture Engineering Candidatesmust have taken at least one mathematics

course at UG level

KNCE02Geo-Informatics (Code14)

KNCE03 GeotechnicalEngineering (Code 08)

KNCE04StructuralEngineering (Code 17)

KNCE05TransportationSystems Engineering (Code20)

KNCE06 Hydraulics and Water ResourcesEngineering (Code 11)

KNCS01 ComputerScienceand Engineering

Theory: Complexity Theory, Complexity of Numbertheoretic and AlgebraicComputations,Logic, QuantumComputing

Algorithms: Deterministic, Parallel, and Approximation inGraphs, Computational Biology, Data Streams, Geometry,Vision, Biometrics.

Artificial Intelligence: MachineLearning,LanguageAcquisition, NaturalLanguage Translation,KnowledgeManagement.

SoftwareTechnology: SoftwareArchitecture

Security: Operating Systems, Network,Infrastructure, Smart-Card, Protoco l Design.Compilers: Compilersfor HighPerformanceArchitecture

Networks: Internet Technology, GridComputing,Mobile

Computing.

Architecture:

VLSI: Design including floor-planning and routing, Testing,Fault Tolerance,Embedded systems (tools and design),

Degree inComputerScience.

21

7/28/2019 m.tech Brochure 2013 2014

26/48

7/28/2019 m.tech Brochure 2013 2014

27/48

6. IndianInstitute ofTechnology Kharagpur -KH

In allcases the minimum eligibility isdegree inengineering with a minimum of 60% marks orequivalent.


KHAE01 AerospaceEngineering

AerospaceEngineering Degree inAerospace,Mechanical,MarineEngineering/NavalArchitecture Engineering/CivilEngineering.

KHAG01

AgriculturalandFood

Engineering

Farm Machinery & Power

Degree inAgriculturalEngineering(All Specializations), Biochemical

Engineering (KHAG03), ChemicalEngineering (KHAG03), CivilEngineering (KHAG02, KHAG05), Food Technology (KHAG03),

Dairy Technology (KHAG03), Navel Archi tecture (KHAG05), Mechanical

Engineering (KHAG01, KHAG03).

KHAG02Land and Water Resources

EngineeringKHAG03 Food Process Engineering

KHAG05 Aquacultural Engineering

KHAG06 AgriculturalSystems &Management.

KHBT01 Biotechnology Biotechnology and BiochemicalEngineering Degree in Biotechnology/ Biochemical/ ChemicalEngineering

KHET01Centre for

Educational

TechnologyMedia and Sound Engineering B.Tech in ECE, COMP, EE, INST

KHCE01

Civil Engineering

Hydraulic and Water ResourcesEngineering.

Degree inCivil Engineering

KHCE02 TransportationEngineering Degree inCivil Engineering

KHCE03 EnvironmentalEngineering &Management

Degree inCivil Engineering/ChemicalEngineering

KHCE04 GeotechnicalEngineering Degree inCivil Engineering

KHCE05 StructuralEngineering Degree inCivil Engineering

KHCH01 ChemicalEngineering ChemicalEngineering Bachelordegree inChemicalEngineering / Chemical Technology.

KHCR01Cryogenic

Engineering

CentreCryogenicEngineering Degree inChemical,Mechanical, Engineering , Electrical Engineering or,

M.Sc. inPhysicsorMaterialsScience

KHCS01 ComputerScienceand

EngineeringComputerScience & Engineering. Degree inComputerScience & Engineering or InformationTechnology

KHEC02

ElectronicsandElectrical

CommunicationEngineering

MicroElectronics & VLSI Design.

Degree inElectronics and Electrical CommunicationEngineeringKHEC03 R F & MicrowaveEngineering

KHEC04 TelecommunicationSystemEngineering

KHEC05 VisualInformation and EmbeddedSystems Engineering

KHEE01

Electrical

Engineering

Machine Drives and Power

Electronics.Degree inElectrical (KHEE01-KHEE04), Electronics and Elect.

Communication (KHEE02, KHEE04), Instrumentation (KHEE02,

KHEE04) Engineering

KHEE02 ControlSystem Engineering

KHEE03 Power & Energy System

KHEE04 Instrumentation and SignalProcessing

KHIM01Industrial

Engineering &Management

Industrial Engineering. &Management.

Degree in Aerospace, Agricultural, Chemical, Civil, Computer Science,

Electrical, Electronics & Elect. Communication, Energy,

Industrial, Information Technology, Instrumentation, marine,

Mechanical, Manufacturing,Metallurgical, Mining, NavelArchitecture,

Production Engineering.

KHMA01 MathematicsComputerScience and Data

Processing.M.Sc. degree in Mathematics, Physics or Statistics. B.Tech in

Electrical Engineering & Electrical Communication & Engineering

KHME01

Mechanical

Engineering

ManufacturingScienceandEngineering

Degree in Mechanical (all specializations) Aerospace (KHME02,KHME03), Energy (KHME02), Metallurgical (KHME01), Production(KHME01) Engineering

KHME02 ThermalScience and Engineering

KHME03 MechanicalSystems Design

7/28/2019 m.tech Brochure 2013 2014

28/48

23


KHMN01 MiningEngineering Mining Engineering

B.E/B.Tech. Degree inMiningEngineering, Petroleum Engineering,

Mineral Processing,

M.Sc Tech ( Applied Geology and Geophysics)

M.Sc Geology and Geo-informatics

KHMS01 Materials Science Materials Science and Engineering.

B.Tech/B.E Degree in Chemical Engineering/Technology,

Ceramic and Glass Technology, Materials Technology, Plastic

and /or Rubber Technology, Polymer Science and

Technology/Biotechnology with 60% marks minimum.

M.Sc. in Physics, Solid State Physics, Chemistry, Material

Science Polymer Chemistry, Electronic Science with 60% marks

minimum.

KHMT01

Metallurgical andMaterials Engineering

Metallurgical and Materials EngineeringDegree in Metallurgical, Chemical, or Mechanical Engineering or

Production Engineering or Manufacturing Science and Engineering

or in Glass and Ceramic or Materials Science/Technology

KHOE01 Ocean Engineering &Na va l A rch ite ct ure

Ocean Engineering & Naval ArchitectureDegree in Aerospace, Civil, Marine Engineering, Mechanical,

Production, Ocean Engineering, Naval Architecture, Ship-buildingtechnology or equivalent.

KHPH01 Physics & Meteorology Solid State Technology

M.Sc. (Physics/Applied Physics/Solid State Physics), Bachelor in

Engineering Physics/Polymer Engineering, M.Sc. (Polymer

Physics/Polymer Science), M.Sc. (Electronic Science/Materials

Science/Chemistry with Mathematics at the B.Sc. level), M.Sc.

(Applied Optics), Bachelor in Electronics Engineering, /Electronics

and Electrical Communication Engineering

KHRT01 Rubber Technology Rubber TechnologyDegree in Chemical, Materials, Plastics and/or Rubber, Polymer or

Textile Technology, Mechanical or Production Engineering or in

Chemistry.

KHID01

Ranbir and ChitraGupta School of

Infrastructure Design

and Management

Infrastructure Design and Management B.Tech. in Civil, Electrical, Mechanical or B.Arch./B.Plan.

KHRE01Reliability Engineering

CentreReliability E ngineering

Degree in Electrical Engineering, Electronics & Communication

Engineering, Civil Engineering, Chemical Engineering, Computer

Science, Industrial Management, Mechanical Engineering,

Aerospace Engineering, Production Engineering, Instrumentation

Engineering, Manufacturing Engineering, Information Technology

and allied branches.

KHIT01School of Information

TechnologyInformation Technology

B.E./B.Tech. in Information Technology or Computer Science &

Engineering, or Electronics & Electrical Communication

Engineering

M.C.P. Degree Program

KHAR01Architecture &

Regional PlanningMaster of City Planning

Degree in Architecture (B.Arch.) or Civil Engineering,(B.Tech./BE) or Bachelor of Planning (B.Planning). Students with

MA/M.Sc. degree in Geography or Economics or Sociology are

also eligible for admission, after clearing net..

24

7/28/2019 m.tech Brochure 2013 2014

29/48

7. IndianInstitute ofTechnologyMadras - MD

The minimum eligibility is a graduate degree withfirst class or minimum of 60% aggregate marks (orequivalent grade point average) in the

corresponding orspecifiedbranch.

Code Department Fields of specialization Minimum Qualification (The candidate should posses thefollowing degree in B.E./B.Tech or equivalent)

MDAE01 AerospaceEngineering

Aerodynamics, Propulsion,Structures

Aerospace Engineering, Automobile Engineering, Chemical Engineering,

Civil Engineering, Computer Science & Engineering, Electronics &

Communication Engineering, Electrical & Electronics Engineering, Energy

Engineering, Instrumentation, Mechanical Engineering, ManufacturingEngineering, Metallurgical Engineering, Naval Architecture, Production

Engineering.

MDAM01 AppliedMechanics

Specializationin / Fluid Mechanics

SolidMechanics

Aerospace Engineering, Chemical Engineering, Civil Engineering, Energy

Engineering, Mechanical Engineering, Metallurgical Engineering, Naval

Architecture.

MDCH01 ChemicalEngineering

Transport processes, Process

control Biochemical Engineering,

Environmental Engineering,Materials and HighpolymersEngineering.

ChemicalEngineering, BiochemicalEngineering, orEnvironmental

Engineering and Civil Engineering

MDCE01

Civil

Engineering

Building Technology &ConstructionManagement

Architecture (B.Arch.), Civil Engineering

MDCE02 EnvironmentalEngineeringAgriculturalEngineering, Biotechnology,ChemicalEngineering,Civil

Engineering,Environmental & Civil Engineering, M.Sc. inLife science.

MDCE03 GeotechnicalEngineering Civil Engineering

MDCE04 Hydraulic & Water ResourcesEngineering

AgriculturalEngineering,Civil Engineering,Environmental /

Environmental and Civil Engineering

MDCE05 StructuralEngineering Civil Engineering

MDCE06 TransportationEngineering. Architecture (B.Arch.), Civil Engineering

MDCS01Computer

Science &

EngineeringComputerScience & Engineering

B.E. / B.Tech (CS Or IT) or MCA or M.Sc (CS) (OR)

B.E/B.Tech in any discipline plus at least three years teaching in

CSE/ IT / MCA Departments, and current appointment in one of theseDepartments.

MDEE01

ElectricalEngineering

Communications, Networks, Signal

processing, Speech & Image

Processing Information TheoryElectronics & CommunicationEngineering

MDEE02Power Systems & Power

ElectronicsElectronics & CommunicationEngineering,Electrical & Electronics

Engineering,Instrumentation

MDEE03 MicroElectronics & VLSI Design Electronics & CommunicationEngineering

MDEE04 Control and Instrumentation Electrical and Electronics Engineering, Electronics and CommunicationEngineering,Control and Instrumentation Engineering.

MDMA01 Mathematics IndustrialMathematicsandScientificComputing

The candidatesshouldpossess the followingdegree in BE / B.Tech.

or equivalent in Aerospace Engineering, Chemical Engineering, CivilEngineering, Computer Science & Engineering, Electronics &

Communication Engineering, Electrical & Electronics Engineering,

Mechanical Engineering, Metallurgical Engineering, Naval

Architecture

ORM.Sc. inMathematics

ORM.Sc. inPhysics

25

7/28/2019 m.tech Brochure 2013 2014

30/48


MDME01


Thermal Engineering Stream:

(Combustion & Propulsion, Heat

Transfer & Thermal Power, I.C.

Engines & Gas Turbines,

Hydroturbomachines,

Refrigeration & Air Conditioning,

Thermal Turbomachines)

(The candidateshouldposses the followingdegree in B.E./B.Tech. or

equivalent)

Aeronautical/Aerospace Engineering, Automobile Engineering,

Chemical Engineering, Energy Engineering, Mechanical Engineering,

MarineEngineering,Petroleum Engineering

MDME02DesignStream:

(Mechanical Design, Composites

Technology)


equivalent)

Aeronautical/Aerospace Engineering, Automobile Engineering,


MDME03

Manufacturing Engineering Stream:

(Manufacturing and Precision

Engineering)


equivalent) Aerospace Engineering, Automobile Engineering,

Computer Science & Engineering, Electronics & Communication

Engineering, Electrical & Electronics Engineering, Industrial

Engineering, Instrumentation, Mechanical Engineering, Manufacturing

Engineering, Machine Tool Engineering, Naval Architecture,

Production & Industrial Engineering, ProductionEngineering

MDMM01 Metallurgical &Materials

Engineering

Metallurgical & Materials

Engineering

BE/B.Tech or equivalent in Biotechnology, Chemical Engineering,

Manufacturing Engineering, Materials Technology, Mechanical Engineering,

Metallurgical Engineering, Nanotechnology, Production Engineering or other

appropriate branch of Engineering/Technology. Science postgraduates (M.Sc.

or equivalent) in Physics, Chemistry, Materials Science, Nanoscience,

Nanotechnology or other appropriate branch of Science with exceptional

merit and research or industrial experience may be considered.

MDOE01

Ocean

Engineering

Ocean Engineering

Aerospace Engineering, Civil Engineering, Marine Engineering,

Mechanical Engineering, Naval Architecture Or any other appropriate

engineeringdiscipline

OR

M Sc inPhysics,Mathematics,Statistics and Oceanography

MDOE02 Petroleum Engineering

Chemical Engineering, Civil Engineering, Marine Engineering,

Mechanical Engineering, Naval Architecture, Petroleum Engineering

Or any other appropriateengineeringdiscipline

OR

M Sc in Physics, Mathematics, Statistics Oceanography, Geology

and Geophysics

MDPH01 Physics SolidState Technology

Electronics & Communication Engineering, Electrical & Electronics

Engineering, Metallurgical Engineering. M.Sc. Materials Science

(Electronics background), M.Sc. Mathematics, M.Sc. Applied Mathematics,

M .Sc. Physics, M.Sc.

26

7/28/2019 m.tech Brochure 2013 2014

31/48

8. IndianInstitute ofTechnology RoorkeeRR

Minimum qualification for candidates of general category seeking admission to the PG programme must have at least 60% marks or 6.00

CGPA on a 10 point scale at qualifyingdegree level. For SC/ST/PD category candidates thispercentage is 55% or 5.50 CGPA on a 10 point

scale. The percentage of marks willbe consideredas aggregate awarded inqualifyingdegree examination.


RRAH01 Alternate Hydro EnergyCentre

Alternate Hydro Energy SystemsA recognized Bachelors Degree in Civil / Electrical/

Mechanical / Industrial / Chemical/ Electronics / Computer/

Agricultural / Environmental Engineering or its equivalent.

Environm

Date post:	03-Apr-2018
Category:	Documents
Upload:	mwbarve
View:	213 times
Download:	0 times

m.tech Brochure 2013 2014

Documents