April 08. Copyright Wastequip Company 2008, all rights reserved. Specifications are subject to improvement without notice. CautionEquipment manufactured by Wastequip and/or its individual companies should be operated by properly trained personnel. Operators should be familiar with OSHA, ANSI and any other applicable standards or laws for using this equipment. Improper use, misuse, or lack of maintenance could cause injury to people and/or property. Photos used in the literature are illustrative only. We assume no liability or responsibility for proper training/operation of equipment not manufactured by Wastequip. We reserve the right to make changes at any time without notice. Information contained within this literature is intended to be the most accurate available at time of printing.

Mountain TarpHeadquarters1002 North 15th Street Middlesboro, KY 40965606-248-7717 phone800-248-7717 toll free606-248-2077 faxsales@mountaintarp.com

Mountain Tarp - Monroe, OH940 Holman Avenue Monroe, OH 45050(Exit 29, I-75)513-422-7737 phone877-725-7772 toll free513-422-7757 faxmonroe@mountaintarp.com

Mountain Tarp - Ravenna, OH4442 Street, Route 14 Ravenna, OH 44266(Exit 43, I-76)330-325-7722 phone866-344-7722 toll free330-325-7570 faxravenna@mountaintarp.com

Mountain Tarp - Louisa, KY225 Fullers RoadLouisa, KY 41230606-686-2117 phone606-686-2118 faxlouisa@mountaintarp.com

www.mountaintarp.com

Company ProfileMountain Tarp began in September of 1987 as the brain child of President Jeff Bowling. He previously worked as a sales representative for a tarp company in Texas, but after five years Jeff returned home to Middlesboro, Kentucky to visit family and friends. There he noticed the great number of trucks and tractor trailers that were not being tarped or were tarped insufficiently. His decision was simple - to start his own tarping company that would provide the best quality product he could offer and at the most competitive price.

Mountain Tarp not only manufactures our own tarps in-house but also most of the hardware and parts that go with each system. State-of- the-art welding and machine capabilities allow us to fabricate and assemble all of our own systems, ensuring all Mountain Tarp products are the best quality we can offer.

In 2006 Mountain Tarp was acquired by Wastequip, a company nationally known for personal service, allowing us to now extend our products and services to customers around the world. As always, Mountain Tarp Has You Covered!

ECONOMY .......................... 3 Landscape Dump Shade Econo Flip Tarp

FLIP TARP ............................ 4 Dump Body Belly Dump Southern Spec (Small Trailers) Transfer Set Original Coal Bucket Frameless Demolition (Half Roun d) Transfer (Open Top) SIDE ROLL ...........................7 Ratchet Side Roll Lock-N-Roll Electric Lock-N-Roll Transfer Ratchet Side Roll Transfer Lock-N-Roll

TARP-N-GO CABLE SYSTEM ...............................10 Anti-Pollution Semi-Waterproof Side-Drop

SIDE FLIP ...........................12 Single Side Flip Double Side Flip

ROLL-OFF CONTAINERS ....14 Waterproof Side Roll Tarp-N-Go Cable System Hand Tarp

CRUSHED CAR HAULER ...15

FLAT BED SYSTEMS .........16 Side Kit Hand Tarps Rolling Tarp System

BEDLINERS ........................17

www.mountaintarp.com2

Tarp Materials

Hot top Gorilla mesh Mountain mesh Texnet

22 oz. vinyl 18 oz. vinyl 14 oz. vinyl Trash net

nothing wrong with map-this is bad trap issuefrom printer (note clean lines in some areas,chunky low res in others)

Weve got you covered with innovative tarping products

Economy SystemsLandscape, Dump Shade, Econo Flip Tarp

Mountain Tarp is pleased to announce our economy tarping systems created for economical pricing without losing the quality parts and workmanship that is standard with all our products. Currently we offer three different systems: the pull style Dump Shade, the Landscape, and the Econo Flip Tarp.

Landscape Our Landscape tarp is simple yet practical, mounting at the front of the trailer or body by two end plates with the roller bar attached between. The Landscape tarp comes with our exclusive locking handle. To roll the tarp up just unlock the handle and crank in to cover, then secure the rear with tarp straps, roll up the excess, and lock handle back into place. The Landscape is also our most economically priced tarping system designed for the landscape trailer.

Dump ShadeThe Dump Shade is shipped out fully assembled and operates similarly to a pull-down window shade. Constant spring tension is applied by our lifetime warranty heavy duty compression spring, while in the covered and uncovered positions. This system also comes with our smooth, aluminum housing and end plates mounted on the cab shield of the body. Made for virtually all small body needs, our Dump Shade can be fit to any size body.

Econo Flip TarpThe Econo Flip Tarp is a specially designed light duty version of the Flip Tarp for smaller dump bodies and low-impact usage. This system is available with side mount springs or extension springs, and direct drive or manual (ground level) operation.

Holds up to 32' of mesh tarp

Lifetime warranty on spring

Pre-assembled2-piece construction

Extruded aluminumhousing & end plates

Highlift gate dump body Mechanics body Transfer application Dump body top mount Simple pull operation

Extension spring Side mount spring

Optional wind shield& end plates

Pre-assembledgear box

Side orextension springsavailable

www.mountaintarp.com

MOUNTAIN TARP

3

3-Piece telescoping axle

Spring Options

4-Spring side mount up to 18

Through rail torsion spring up to 39

Under rail torsion spring up to 36

5-spring side mount up to 24

One Arm, Three UsesMountain Tarp's one-piece tarp arms are the strongest in the industry. You can order one of three standard tarp arm configurations or custom order arms to your specifications. The three standard options are shown here. Tarp arms bent up for raised cab shields

Tarp arm straightTarp arms bent forward-for extended cab shields

Drive Options

Roller Assembly OptionsYou have a choice of 2 options-an electric (left) or a manually powered roller system (right)

Black mesh tarp is fastened to a full length tarp axle

High polish anodized aluminum wind shield and end plates protect the tarp roller and are a classy look for your truck

In cab shield option

Flip Tarp Systems

For Dump Bodies Flip Tarp systems are available for applications from 10 up to 48 and come with the industrys first Guaranteed Unbreakable tarp arms. The Flip Tarp comes as either a manual, ground-operated system or as a fully automatic system, equipped with a motor backed by the manufacturers 3-year, non-prorated warranty. The Mountain Tarp Flip Tarp is the most overbuilt system on the market.

Roller assemblymounting options

available

3-year motorwarranty

Guaranteed Unbreakabletarp arms

3300 lb. flipping pressure

Tension hoop option locks tarp down on high cab shield mounts

www.mountaintarp.com

MOUNTAIN TARP

4

Tension hoop in untarped position.

Remote controlRocker switch with solenoid

Tarp Arm Guaranteed Unbreakable

you break it, well replace it!

Made of extruded aluminum, then polished and anodized for a lifetime shine.

Custom arm attachments available.

www.mountaintarp.com

MOUNTAIN TARP

Flip Tarp Systems

For Belly Dumps

The belly dump tarp roller assembly is available with a Diamond tread plate roller box for manual systems or a smooth roller box for electric systems

All tarp roller assemblies are custom built to fit your belly dump at no extra charge

Standard kit includes all necessary attachments (custom attachments available)

Available in electric or manual option

Custom-built roller assembly

Diamond tread plateroller box Guaranteed

Unbreakable arms

For Transfer Sets

Specially designed for Transfer sets, trucks, and pups

Uses 5-spring, side mount clock springs

Springs can be mounted up to 18" below the top rail for high mount applications

Outside-mounted arms on the front body, and inside-mounted arms on the rear trailer with spring covers to keep out debris

Total electric operation

For Southern Specs (up to 28 in length)

Custom designed to meet the specifications for small trailers in the southern U.S.

Standard with 3300 lb torsion springs and aluminum drop plates

Available in electric or manual option

Remote control option available

Top-mounted smooth, electric roller

assembly

Safety chain holds down tarp arms" either in the Belly Dump or Southern Spec section

Top mountingroller assembly

GuaranteedUnbreakable arms

High torquewarranted motor

Guaranteed Unbreakabletarp arm

Spring assembliesmounted inside for

transfer box

5

They are requesting better photobut we don't have one

www.mountaintarp.com

MOUNTAIN TARP

Flip Tarp Systems

The Original Coal Bucket (up to 36 in length)

Many of our Original Coal Bucket tarping systems manufactured in 1990 are still being used today

The roller box is mounted on two heavy duty braces, allowing the top of the box to be flush with the top of the bulkhead

3300 lb torsion spring assembly can be mounted in or under the bottom rail by use of spring drop plates

Available in electric or manual option

Frameless Trailers

Windshield and end plate roller assembly are mounted behind the raised bulkhead

Torsion spring assembly is mounted in the bottom rail

Torsion springs with 3300 lbs of flipping pressure are provided standard with 2 high-friction bearings

Custom designed kit for trailers with high rise bulkheadTop mount roller bar allows use of high rise bulkhead as a wind deflector

Top mount with wind shield, electric or manual

Ladder option available

Roller boxmounted on

bracesGuaranteedUnbreakable

arms

3300 lb flipping

pressure

Demolition Half Round (up to 34 in length)

Custom 7 bend in arms and special bracing to eliminate excess system width

Custom attachments for any trailer

Smooth, anodized and polished aluminum housing

Total electric operation

Guaranteed unbreakable custom bracing

Custom attachment for half round trailers with 3300 lb torsion springs

Custom bracingGuaranteedUnbreakable arm

3300 lb torsionsprings

Double arm for end dumps 37 - 48 long

thick tarp arms

Dual 3900 lbspring system

Transfer (Open Top) Trailers (up to 48 in length)

Covers chip and transfer trailers up to 48

Tarp is made 6 wider than the trailer to cover heaped loads

Roller box is mounted 3 below the top of the trailer so the tarp covers the front of the bulkhead

Dual 3900 lb springs used for covering end dumps over 36' and open top trailers up to 48' long

Pre-assembled front assembly for ease of installation

6

7Side Roll Tarp Systems for agricultural applications

Ratchet Side Roll Tarps

Waterproof and designed to accommodate heaped bulk loads above the bows

Designed so the entire tarp rolls out of the load area

Can be installed with a master bow and fabric cap to eliminate tarp strapping at the bulkhead

Tarp Stops keep rolled tarp away from the loading space

Side Roll Features

Optional fabricbonnet

Extruded tarpstops Heavy duty

rachets withbrackets

Removable handlewith universal joint

Custom tailstandard

6 EZ Tarp Stop 3 EZ Tarp Stop Flexible Belted Tarp Stop 3 or 6 Rubber Tarp Stop Elevated Tarp Stop Elevated Tarp Stop on Swing Gate

Ratchet and bracket

Removable Handle

Solid aluminum custom arch7/8 heavy duty aluminumcustom made arch and length

Standard adjustable steelStandard 8 rise bow with steelbow brackets

Flexible custom archAluminum or steel cast brackets mounted with a permanent arch (not recommended for hauling sand)

Heavy Duty BowConstructed from 1 1/2" round 14 gauge steel included with top rail mounting brackets

www.mountaintarp.com

MOUNTAIN TARP

Bow options for Ratchet Side Roll & Lock-N-Roll systems

Custom TarpsAt Mountain Tarp we custom make tarps from solid vinyl material to replace virtually any of your companys tarps, regardless of brand or style. Request our signature Stars and Stripes tarp design on your next tarp order.

Lock-N-Roll tarp systems for water tight agriculture applications

Lock-N-Roll Side Roll Tarps Manufactured out

of 22 ounce vinyl tarpaulin material (18 ounce option available)

All stress points are double reinforced for extra wear (optional bow reinforcements are also available)

Designed in a variety of sizes, from 10 grain boxes to 53 tipper trailers

Available in manual or electric (see Electric Lock-N-Roll)

Fabric BonnetA 10 aluminum master bow with 22 oz vinyl bonnet can be bolted in place as a permanent cap, or mounted with D-rings and tarp straps to be removable.

Custom Attached Tail FlapOur tail flap comes attached to the tarp, using bungees to secure coverage. This option is recommended for standard and swing gates.

Removable Tail BonnetThe tail bonnet is attached to the trailer separately fromthe tarp for easy removal. This option is recommendedfor standard tailgates and bottom-dump trailers.

Fabric bonneteliminates crackingaluminum or steel

Standardwith rollreturn

Double reinforcedstress points

Locking flexcrank handle

Lock-N-Roll Features (No Ratchet Straps Necessary)

Flex arm allows small bracket install

Rear roll return standard

Electric Lock-N-Roll Saves time and money!

Easy operationturn a switch and the system rolls across the trailer, secures under the latch plate, and seals the load

Constant and even tension is applied to the tarp at the front and rear, ensuring the trailer is sealed without straps or a crank handle

Remote control option available for even greater convenienceRemote control

Control unit

Reinforcedtarp Electric arm Motor

Rear rollreturn

www.mountaintarp.com

MOUNTAIN TARP

Bonnet & tail options

Strongest latch plate in the industry Flexible crank handle locks on side Straight crank handle locks at rear of trailer

8

9Heavy Duty Side Roll Tarp Systems for waste transfer

Side Roll Transfer Tarps Up to 53

Triple reinforced strap design

12,000 lb rated ratchet straps

Ratchet Side Roll Two straps are standard

for both the nose and tail

Top rails are all triple reinforced

Provided with ratchets, straps, and with either Gorilla mesh or vinyl material

Available with front crank operation

Custom designed for round or square nose trailers

Triple reinforcedtop rails

Exclusive EZ Off tarpstops

www.mountaintarp.com

MOUNTAIN TARP

Transfer trailer Side Roll systems are available in Ratchet and Lock-N-Roll styles with 22 oz vinyl or our exclusive heavy duty Gorilla mesh material designed for the trash industry. All sections of the tarp that receive wear are reinforced for extra durability, including: double reinforced pressure points with heavy duty webbing, triple

reinforced top rail and center beam with gorilla mesh and vinyl the entire length of the top rail, 18 oz vinyl reinforced nose and tail along the entire width, and custom sewn nose and tail ratchet straps to ensure even pull distribution.

2 tail strapsincluded

Flex or straight crank handles available

"Front aluminum cap option available

Lock-N-Roll Flex or straight mount rear

crank handle options

Front aluminum caps are used with Lock-N-Roll systems and are available with a 2" wind deflector

Available in either Gorilla mesh or 22 oz vinyl without ratchet and straps

Available in manual or electric operation

Standard withfront roll return

Double reinforcedpressure points Tarp stops

Crank handle

Gorilla MeshMade to the heavy duty standards required by the trash industry. This material is puncture rated at 385 lbs per square inch, without factoring in reinforcements. The nose and tail of the tarp are reinforced with 26 wide vinyl, increasing

puncture resistance to 785 lbs per square inch. All pressure points are reinforced with a 3 wide, heavy duty web rated at 15,000 lbs. Nose and tail ratchet straps are sewn in using 12,000 lb rated webbing.

Custom sewing on each tarp ensures an even pull distribution where all straps attach. Both the top rail and center beam are reinforced with a three-layer combination of Gorilla mesh and vinyl.

Vinyl Side Roll tarpsTested to meet the most strenuous industry requirements, our 18 and 22 ounce vinyl tarps are heavy duty at 1000 denier and come in a variety of colors to choose from.

Transfer Ratchet Side Roll & Lock-N-Roll tarpaulin material specifications

They are requesting better photobut we don't have one

Custom aluminum cap

Anti-Pollution, Semi-Waterproof, Side Drop

Tarp-N-Go Cable SystemsOur Tarp-N-Go cable style system is available in 3 different styles: Anti-Pollution for demolition, gravel, and rock; Semi-Waterproof for asphalt and sand; and Side-Drop system made to keep water out and heat in. All Tarp-N-Go systems are made with high quality aluminum components, stainless steel cables, and are available in manual or electric operation. The tarp bows store compactly out of the load area and are available in 6, 12, or 18 rises. The tarp bows also come standard with our exclusive EZ Bow ends, allowing bow and tarp replacement without removing the cable. The Power Bow option is standard for extra strength where needed. As many components as possible are pre-assembled at the factory, providing an easier installation.

Exclusive 4" and 6" standard anti-lifts prevent tarp from lifting Bent mount crank Straight mount crank

Standard full coverage wind deflector with easy motor access provided on all electric Tarp-N-Go systems

Manual crank with 9 locking positions

Anti-lifts

Bow options Bow end Self-cleaning pulley

Full windshieldManual operation

Bows are available in flat, 6", 12", and 18" rises. Our exclusive Power Bow (top) is standard for providing extra strength where it's needed.

Optional self-cleaning pulley eliminates ice and debris build-up

Extended wear, super tough nylon bow ends ensure smooth tracking operation

Standard rear idler with 4" pulley Extended idler allows tarp to extend past the tailgate

Quiet direct drive motor with sprocket

Direct drive motors are mounted centrally for even power distribution

Dual Tandem direct drive motors for up to 42' trailers

Idlers Electric options with 3-year non-prorated warranty

www.mountaintarp.com

MOUNTAIN TARP

Anti lift

Memory cable inside tarp

10

Extended wear bow ends with memory cable ensure pop-up between bows

11

Tarp-N-Go Cable SystemsAnti-Pollution Used for general containment

when weather conditions are not a concern

Recommended for demolition, gravel, rock, etc.

Standard features include EZ Off bow ends, tarp keepers, and power bow at the rear of the trailer

Tarp reaches inside to inside the top rail

Available with a mesh or vinyl tarp

Anti-lifts provided with vinyl tarp option

Heavyduty mesh

3-year warranty motor

Semi-Waterproof System offers semi-weatherproof

protection with a tarp that reaches outside to outside the edge of the top rail

Highly recommended for asphalt applications, with the tarp riding above the load, not on top of it

Tarps are provided with plastic memory cords on sides to help support the folds between the bows

Dual motor option provides enough power to tarp a 42 long trailer

Standard with 18 oz vinyl tarp available in a variety of colors

Tarp extends tooutside of top rail

Anti-liftsTarp reinforced at bows

MOUNTAIN TARP

www.mountaintarp.com

Tarp extendsover edge of

top rail

Side Drop Meets asphalt system requirements for states that

mandate a side drop

Keeps water out and heat in while in transit

Extended rear idlers are provided to extend the tarp to the end of the tailgate for additional coverage

Available with an 18 oz vinyl tarp

Electric-over-hydraulic for waste transfer trailers

Side Flip Tarp Systems

Tarp center is free of tubing so heaped loads can be totally covered

Self-contained electric-over-hydraulic power unit

Tarp hangs 6" below trailer top to seal load and supported with galvanized cable

Spherical frame bearings eliminate bearing failure due to misalignment

Rear latch secures load for greater containment

Mountain Tarp's Side Flip tarping kit fits both square and radius cornered trailers. This system offers bolt-on installation (no welding required), rapid opening/closing, and is ultra strong while remaining lightweight. Our Side Flip has been fully tested over 11,000 open/close cycles without failure, equating to a 10 year life of 4 cycles per day, 5 days a week. Special designing eliminates any tubing structure over the center of the trailer to allow full load capacity,

even when tarping heaped loads up to 3' tall. This system also has the added benefit of having the fewest parts of any side flipping style system on the market. The Side Flip kit includes: reinforced tarp, all mounting hardware, and a ground control unit to keep the operator safely on the ground. Should any of these parts become damaged, our modular design allows for quick and easy replacements without a welder.

Side Flip tarp kit will fit all square and radius trailers of any length

Self-contained electricover hydraulic power unit

www.mountaintarp.com

MOUNTAIN TARPCable attached to the tarp

for added support6" over hang ensures

total containment

No welding required

ONLY322 lbs

12

Electric-over-hydraulic operation for waste transfer trailers

Double Side Flip Systems

MOUNTAIN TARP

Simple, push button switch operation

14 gauge galvanized tubing

Durable and unique design allows for coverage of heaped loads

Tarp attached to cable to provide added support

Only tarp able to handle the scrap industry

Dual flipping arms

Only hard plastic mesh tarp with a warranty in the industry!

www.mountaintarp.com

Bolt-on assembly requires no welding

13

Perfect for any hauling needs: scrap metal, waste, wood chips, or we can even custom build a system to allow for any kind of load. The heavy duty mesh can accommodate a load up to 2' above the trailer. The Double Side Flip also covers in a matter of seconds, saving you time and money.

Steel components

Tarp attached to cable for added support

Overhang ensures total containment

Electric over hydraulic power unit

Roll-Off Container Tarp Systems

Extruded aluminum EZ Off tarp stop doesn't need to be unbolted when the tarp is changed

Bows can be temporarily removed for loading

Easy tension adjustable rear idler

Bearing-stabilized pulley shaft

Ratchets and straps

Heavy duty 2" ratchet

Waterproof Side Roll Water tight application Crank from either the front or the

rear Operates from ground Contains heaped loads Available in 18 oz or 22 oz vinyl

Black mesh with 2" seat belt webbing

Lightweight and durable trash net material

Hand Tarp Available in trash net, mesh and

vinyl Reinforcement webbing and

grommets every 24 on all edges Custom sizing per specs

Tarp-N-Go Locking crank operates from

the ground

Bows move with tarp and store compactly in front

Available in mesh or vinyl

Extruded aluminumEZ Off tarp stop

Protective full windshieldcomes pre-assembled

Stainlesssteel cables

9-position locking crank

Reinforcementwebbing

Bungeestraps

www.mountaintarp.com

MOUNTAIN TARP

Rearidler

14

15

Crushed Car Hauler SystemsThe Crushed Car Hauler system is designed to meet federal laws for containment of crushed cars. This system is both easy to install and operate with one person in as little as 5 minutes to save you time and money. It has no swinging gates, so it can be opened in even the most confined areas, with each side folding to store behind the trailer and out of the way. Our system is equipped with cables that lower out of the loading area, and greater convenience for two-sided trailers with the option of loading and unloading from either side. The Crushed Car Hauler system, like many of the systems Mountain Tarp manufactures, is also custom made for your trailer. At under 300 lbs per side, our system is ideal for flat bed, single drop or double drop trailers.

Trash net tarpaulin material is reinforced with vinyl and steel cables

Hoops lock the tarp compactly out of the way Manual winch option

Steel bearing rollers for smooth operation

Electric motor option raises and lowers the main cable

Steel bearingrollers

Steel cables in tarp keep itlocked against the trailer

Bearing pivots ONLY300 lbs

www.mountaintarp.com

MOUNTAIN TARP

Requesting new photowith hoops, preferably loaded

Flat Bed Systems

Hand TarpsLumber Tarps, Steel Tarps, Hay Tarps and Coil BagsWe offer a variety of cargo control for flat bed applications, all including:

Ratchets and ratchet straps

Winch and tarp straps

Winch and corner protectors

Chain and chain binders

Rolling Tarp System 5-year corner warranty

1-year total system warranty

Shock absorbent support wheels

Guiding bearings

Full length white roof panel standard

www.mountaintarp.com

MOUNTAIN TARP

Side Kit System Available up to 36 rise bows

Dove tail (shown) or wrap tail available

Lightweight removable panels

All hardware is interchangeable with any brand on the market

Custom fit nose and tail

Side panels available

16

17

Bedliners

Ultra High Molecular Weight (UHMW) Polyethylene LinersUHMW is our premier liner with the impact strength, slickness and abrasion resistance required for all aggregate loads. Available in a wide range of lengths and colors, with outstanding toughness and low friction, UHMW is ideal for nearly any load. Abrasion, corrosion and chemical resistance, along with sound dampening properties make this liner an unbeatable value.

www.mountaintarp.com

MOUNTAIN TARP

High Molecular Weight (HMW) Polyethylene LinersHMW bedliners offer an economically priced means of providing a protective liner for medium-duty hauling, from dirt and clay to farm commodities and light rock. These liners are available in a thickness of 1/4", 3/8", or 1/2", and in a wide range of custom widths and lengths.

Economy HMW

High impact UHMW

Premium warranted UHMW

Available in sheets only, complete kits, and up to 200 rolls of material