MTPU-MK
Key Featuresn
nRugged, compact, light weight and user friendly.
nAutomatic switch over to various available sources.
nExcellent Line & load Regulation.
nBuilt in protections against overload, short circuit and
reverse polarity.
nEnvironmental Compliance to JSS-55555 Table L2B
"we always know who we're working for”
Multimode Power Supply
Input Parameters
AC Input Voltage range 110 Vac to 280Vac
Description
Application
The Multimode Power Supply is a MIL-grade SMPS based Power Supply. It accepts Multiple inputs and provides Multiple
DC output. Thus, it can feed Power to a complex communication system, which requires multiple driving voltages in
presence of multiple power sources in the field. The need to energize the equipment from a solitary 12V Battery is a strong
possibility in field when the 48 V bank of batteries is not available in the remote localities or small detachments.
This Power Supply ensures uninterrupted operation of tactical equipment by error free switch over to batteries in case of
AC mains failure.
n
nCharging of all types of batteries in the field
AC (Genset/ Commercial AC Mains) Operation
In this mode, Power Supply unit operates from AC mains available from any source (Genset/Commercial AC Mains) and
provides the DC output to equipment. Simultaneously, it charges the Battery bank in case battery bank is connected to the
Power Supply.
Battery DC Operation
In this mode, Power Supply unit operates from DC (Battery bank) and provides DC output to the equipment.
AC/DC Automatic Switchover
Power Supply gets automatically powered-up from DC battery input in case of mains failure. This is known as AC/DC
Automatic Changeover. As soon as AC Mains are restored, Power Supply shall automatically power-up from AC Power
Uninterrupted DC Power supply to complex communication system in Tactical environment
47 Hz to 53 HzFrequency Range
DC Input voltage 12/24/48 Vdc
Operation Modes
Specifications
Data and specifications are subject to change without notice Released On: PEL 23/03/2012-J
PRECISION ELECTRONICS LIMITED
"we always know who we're working for”
D-10, Sector-3, Noida 201301, Uttar Pradesh, India
Tel: +91-120-2551556 / 7, +91-120-2555176 / 7, Fax: +91-120-2524337, +91-11-2684-0949
E-mail: [email protected], Website: www.pel-india.com
Efficiency
Output Parameters
80% (Min)
< 1%Line and Load
Regulation
DC Output Voltage 12/24/48 VDC (customer specific)
DC Output Power 200 to 500 Watts (customer specific)
Certifications
Environmental JSS-55555 Table (L2B)
MIL STD 461 E EMI/EMC
Mechanical
FCBC H x W x D (in mm) 133.6 X 433 X 375
Weight of FCBC Assembly < 10 Kg.
The Multimode Power Supply system is designed with R&D resources of PEL after considering the user requirements,
human safety and the field environmental conditions. PEL can customize the system against any user specific requirement.
Page 1Page 2Page 3