Workshop efficiencyThe MTS 6513 has excellent pass-through performance due to its 312 MHz ARM processor and optimized software structure enables high speed ECU reprogramming. In addition, the VCI software facilitates secure immobilizer system reprogramming strategies.

More than a pass-thru device – Embedded applicationsThe Bosch MTS 6513 VCI includes an embedded runtime framework which enables the VCI to run embedded applications. This allows OEM’s to deploy embedded applications such as: drive recorder, parking lot re-flash (standalone re-flash), and diagnostic runtime as well as take advantage of the screen display and keyboard for the user to run the embedded applications without the need of a PC. Its 4 GB Micro SD-card can be used to store drive recorder log files, re-flash images, etc.

Workshop flexibility – Embedded web-serverAn embedded web server supports external browser based display devices (e.g. smart phones) via HTML for an extended range of service bay use cases.

Easy update managementVCI firmware can be easily updated by the user via the VCI manager software. Additionally, FPGA technology allows for updating of the vehicle communications logic in the field.

Compliant with SAE J2534 and ISO 22900 (MVCI)Supports worldwide legislated communication standards, with a wide range of supported protocols.

Reliable support of CAN bus architecture The MTS 6513 allows CAN communication on Pins 6 & 14 with up to 1 M bit/sec. Reliable on board ECU communication is ensured with the ISO 16845 certified CAN core in the FPGA.

Support of ISO 9141 und KWP 2000 legacy vehiclesSimultaneous communication on two separte K/L line 12 volt buses. On primary and secondary K/L line pins.

Flexible host communicationHigh Speed (480 MBps) USB client interface (via OTG Port) for fast data communication as well as user-friendly wireless communication with WiFi 802.11 b/g/n certified for operation in more than 130 countries.

Field provenMore than 100,000 VCIs of the MTS 65xx product family have been deployed globally to OEM workshops.

MTS 6513 is optimized for vehicles with CAN and K-Line communication requirements. The MTS 6513 offers a display and keypad for running embedded applications with or without a PC. Ruggedized design and known Bosch quality. MTS 6513 display and keypad allow the VCI to be a stand alone diagnostic tool as well as connect to a PC for enhanced diagnostic features.

MTS 6513 Vehicle Communication Interface

MTS 6513 Vehicle Communication Interface

15-178 ©2015 Robert Bosch LLC, USA. All rights reserved. | BOSCH is a registered trademark of Robert Bosch GmbH and/or its affiliated entities.

Supported Standards f D-PDU API (ISO

22900-2) for complete protocol abstraction

f J2534-1/-2 Pass-Thru

Vehicle Interfaces f CAN - 1 independent channel

and 1 high speed transceiver f UART – 2 independent

channels f ISO K-Line and L-Line

Host Interfaces f Wired HIgh Speed (480

MBps) USB 2.0 f Wireless 802.11 b/g/n

Other Features f Processor: PXA270 ARM

processor, 312 MHz f 4 GB micro SD card for

mass storage f Operating temperature

range: 0 to +50 °C f Includes a Super Capacitor

allowing continue operation without power for up to 30 seconds.

Rubber End Boots for VCI and vehicle protection

Vehicle Interface

Host Interface Powered through Diagnostic Connector or USB Power

Full-speed USB Client Connector for communications to host PC (under protective cover)

Backed by Bosch Automotive Service Solutions

f 30 years of experience with vehicle diagnostic solutions for global OEMs

f Supported by a broad suite of complimentary diagnostic software and content authoring tools

f Engineering services available to assist our customers with product integration

f Global network of product support centers and distribution locations.

Micro-SD Card Slot for data logging (under protective cover)

WiFi Dongle certified for operation in more than 130 countries (under protective cover)