169
MULTI-FORMA II
E Schlafen: MULTI-FORMA II Seite 169 4. 2014 E
MULTI-FORMA II Room for unlimited possibilities
The modern, innovative MULTI-FORMA II wardrobe system is suitable for individual arrangements because it is particularly versatile. New front designs and unique intermediateunits give MULTI-FORMA II its particularly exclusive look. As a universal wardrobe system, the design of MULTI-FORMA II enables you to combine its units with all of the units in thevarious hülsta Bedroom ranges and almost every type of interior style.
To enhance the competency of the range, MULTI-FORMA II now also includes a walk-in room system which incorporates all the key performance features (planning, surface versions, special sizes, etc.) of the previous carcase system. Furthermore, this room/niche system also provides a separate system of fronts. In this way, small niche combinationsand even magnanimous room systems can be created individually. The tried and tested planning system from MULTI-FORMA II involving basic and extension units has been incorporated in the room/niche system. This guarantees a simple and comfortable initiation to the range including easy planning.
Hinge-, folding- and sliding-door wardrobes as well as a room system
Hinge-door wardrobes and folding-door wardrobes see pages 172-199
Sliding-door wardrobes see pages 200-212
Room system see pages 213-223
Important notes: Generally speaking, you as a dealer/qualified fitter are responsible for the cor-rect wall mounting of the units. That is why wall mounting should only be carried out by properlytrained and qualified fitters. hülsta supplies materials for mounting units on walls for nearly all the units and which should beused for safety and for constructional reasons. The assembly materials supplied by hülsta (plugs,screws) are only suitable for fitting components on to concrete in firmness class (C12/15).For other materials (please see separate materials table in the wall composition chapter) we pro-vide you with an assembly mortar set as an extra order. Please note that this assembly mortarset is also only suitable for the materials listed in the materials table.If walls are made up of other materials (e.g. plastered or lighter wall materials), one should useanother method of mounting better suited to the load on site.Please note that if the units are not mounted properly on the wall, there is a risk of the units fal-ling down or tipping over – especially when alternative mounting materials acquired on site havebeen used.For the reasons stated above it is absolutely essential to enquire about the composition of anywalls before signing any contracts.
170E Schlafen: MULTI-FORMA II Seite 170 4. 2014E
Overview: Hinge-, folding- and sliding-door wardrobes as well as room systemHinge-door wardrobes
229.6 cm high 268.0 cm high 337.8 cm high
Folding-door wardrobes
Sliding-door wardrobes
Room system
System heightsSystem widths and depth: see the separate chapters for hinge-/folding-door wardrobes, sliding-door wardrobes or room system
1 2 3
4
8 9
6 7
Intermediate units for hinge-/folding-door wardrobes
229.6 cm high 268.0 cm high
229.6 cm high 268.0 cm high
max. 268.0 / 272.6 cm high
171
MULTI-FORMA II
E Schlafen: MULTI-FORMA II Seite 171 4. 2014 E
Design versions for hinge-/folding-door wardrobes
Handle versions for hinge-/folding-doors
Design versions for sliding-door wardrobes
Design A Design M Design G Design L SOLIST
Handle versions for sliding-doors
Design version for room system
Design A
Design and handle versions
Handle 011(standard handle)
Handle 012
Handle 014/015
Handle026/013
Handle 029/030
Handle 032/033
Handle 034/035
Handle 031
Wood/lacquer/high-gloss versions
* The carcase for high-glossfronts is in matt lacquer in thematching colour.The various designs are available in different versions.See here the separate lists ofversions for the hinge-/folding-door wardrobes, sliding-doorwardrobes and for the room system.
White lacquer (standard)Light interior veneer Dark interior veneer
Versionsinterior wardrobe carcase/wardrobe fittings
Handle version for room system
Lacquer
High-gloss
Veneer
White lacquerWool white lacquerSand lacquerGrey lacquer
High-gloss pure white*High-gloss white*High-gloss sand*High-gloss grey*
Structured beechNatural oakLight brown ashCore walnutCherrywood gold
Versionsouter wardrobe carcase and fronts
Design A Design A pluswith side fillets
Design G Design G pluswith side fillets
Design L Design R Design F Design F pluswith side fillets
172E Schlafen: MULTI-FORMA II Seite 172 4. 2014E
The modern, innovative MULTI-FORMA II wardrobe system is suitable for individual arrangements because it is particularly versatile.New front designs and unique intermediate units give MULTI-FORMA II its particularly exclusive look. As a universal wardrobe system,the design of MULTI-FORMA II enables you to combine its units with all of the units in the various hülsta Bedroom ranges and almostevery type of interior style.
Design idea You can choose from a variety of design versions for the MULTI-FORMA II hinge- and folding-door wardrobes:● Design A● Design A plus – with side fillets● Design G● Design G plus – with side fillets● Design L● Design R● Design F● Design F plus – with side filletsThe various wood/lacquer versions and high-gloss versions (exclusively for fronts) and a number of different handle versions underlinethe versatility of the MULTI-FORMA II wardrobe system.
You can also choose from a variety of versions for the wardrobe interior fittings for the MULTI-FORMA II hinge- and folding-door wardrobes:● White lacquer (standard)● Light interior veneer ● Dark interior veneerPlease state exactly in the order, in which version you require the interior fittings for your wardrobe. If no details of the version are given in the order, the interior fittings are delivered in the standard white lacquer version.
Hinge- and folding-door wardrobes according to the endless assembly principle● Hinge- and folding-door wardrobes and intermediate units can be combined with one another● Optional: - with all-round passepartout
- with top LED lamp (12 V; 2.4 W)- with all-round passepartout and top LED lamp (12 V; 2.4 W) - with cornice and integrated LED spotlamps (12 V, 1 W)- with cornice and integrated light panels (230 V, 8 W)The lights are operated by a standard external footswitch.
● Doors in Design A, A plus, F and F plus with an optional mirror (side facet)● MULTI-FORMA II comes in various widths: the great number of different unit widths means you can create total unit widths in
10 cm steps● Wardrobe inside widths: 38, 48, 68, 78, 98, 158, 198 cm● Different basic wardrobe heights: 229.6 cm, 268.0 cm and 337.8 cm for the hinge-door wardrobes; 229.6 cm and 268.0 cm for
the folding-door wardrobesImportant note: The wardrobe height of 337.8 cm consists of a top wardrobe unit, standard 69.8 cm high, and of a lower wardrobe
unit. The wardrobe sides and the full-length hinge-doors are split visually. In the case of height reductions, the lower wardrobe unit is always reduced in height.
● MULTI-FORMA II is variable: height reductions at intervals of 1 mm, width and depth reductions at intervals of 1.0 cm withoutsurcharge (width reductions are not possible on doors with high-gloss fronts in Design A, G and F).
● Wardrobe outside depth (without handles): 61.6 cm● Wardrobe inside depth: 56.0 cm● Numerous intermediate units with different features for a more open look● Extra-wide panorama units (160 and 200 cm) without a centre partition keep things well organized● Profiled hinge-door end units● Hinge-door corner wardrobes (45° and fully accessible corner 90°)● Functional and high-quality wardrobe interior fittings (see separate "Wardrobe interior fittings" chapter) ● Standard interior fittings per unit: 2 fitted shelves, 1 clothes rod, for hinge-door wardrobes in 337.8 cm height also with 1 fitted shelf
in top wardrobe unit.● Side and rear sloping possible (see "Special-sized products" chapter)
● All wardrobe doors with cushioning mechanism● All wardrobe doors with handle and spring hinges● Innovative door opening bracket (lies on wardrobe carcase, recedes out of view)● Extra-wide fitted wardrobe shelves (160 and 200 cm) of triple glued chipboard● Unobtrusive 2.5 mm size holes● All-metal hinges● Low plinth with trapezoid-shaped brackets for simple assembly● All partitions and side sections have a special plinth adjustment device which makes exact horizontal and vertical assembly much easier● hülsta-SoftFlow: Drawers of intermediate units on hidden bearings incl. auto pull-in feature with brake as fully pull-out units● hülsta-MagicClose: All wooden hinge-doors with door cushioning system
Quality features
Concept/planning possibilities
Height reductions at intervals of 1 mm,width and depth reductions at intervals
of 1.0 cm without surcharge (Width reductions are not possible on doors with high-gloss fronts
in Design A, G and F)!
MULTI-FORMA II Hinge- and folding-door wardrobes
173
MULTI-FORMA II
E Schlafen: MULTI-FORMA II Seite 173 4. 2014 E
Lists of versions for hinge- and folding-door wardrobes
Handleheight: 24.8 cm
matchingversion
Handleheight:24.9 cm
Handleheight:24.0 cm
Handleheight:77.0 cm
Handleheight:114.9 cm
Handleheight:111.3 cm
Handleheight:114.9 cm
Handleheight:175.8 cm
Handle versions for hinge-/folding-doors
Handle 032/033 **Handle 012Handle 011(standard handle)
Handle 029/030* **Handle 026/013 Handle 031 **Handle 034/035Handle 014/015
High-gloss chrome
Matt chrome
029
030
High-gloss chrome
Aluminium colour
026
013
Matt chrome
011
Matt chrome/wood/lacquer version
012
Wood/lacquer version
031
High-gloss chrome
Matt chrome
032
033
High-gloss chrome
Matt chrome
034
035
High-gloss chrome
Matt chrome
014
015
matching version
without surchargewithout surcharge without surcharge Surcharge per handle: Surcharge per handle: Surcharge per handle: Surcharge per handle: Surcharge per handle:
With the MULTI-FORMA II hinge- and folding-door wardrobes you can choose between different handles. The desired handle and the desired wood/lacquer version for matchinghandles must always be stated in the order (handles for high-gloss fronts are in matt lacquer in the matching colour).If no details of the handle are stated in the order, the standard handle 011 is supplied (exceptions: Design F and F plus always with a standard formed wooden handle, Design G and Gplus always with a standard handle 030 or 029).* Handle 030 is the standard handle for Design G and G plus (handles 030 and 029 for Design G and G plus without surcharge)** Handle 029/030, 032/033 and 031 are not possible for Design L
With the MULTI-FORMA II hinge- and folding-door wardrobes and the intermediate units (only available in Design A) you can choose the carcase and the front in a different version.Please state this clearly in the order. When versions from different price groups are exchanged, the higher price group is always charged.
White lacquer (standard)Light interior veneer Dark interior veneer
Version
973974975
Model no.
Versionswardrobe interior fittingsWith the MULTI-FORMA II hinge- and folding-door wardrobes you can choose betweenthree versions for the wardrobe interior fittings. The desired version must be stated in theorder. If no details are given in the order, the wardrobe interior fittings are supplied inwhite lacquer.
Design versions for wardrobe doors Design A Design G Design L Design R Design F Design F plus
with side filletsDesign G plus
with side filletsDesign A plus
with side fillets
174E Schlafen: MULTI-FORMA II Seite 174 4. 2014E
Lists of versions for hinge- and folding-door wardrobesLacquer
High-gloss
Veneer
Lacquer
Veneer
White lacquerWool white lacquerSand lacquerGrey lacquer
Structured beechNatural oakLight brown ashCore walnutCherrywood gold
ApplicationModel no.
030(standard handle)029
Wood/lacquer/high-gloss versions – Design AModel no. Carcase*/front Price group
White lacquerWool white lacquerSand lacquerGrey lacquer
High-gloss pure white*High-gloss white*High-gloss sand*High-gloss grey*
Structured beechNatural oakLight brown ashCore walnutCherrywood gold
IIII
IIIIIIII
IIIIIIIIII
011(standard handle)012014 / 015026 / 013029 / 030032 / 033034 / 035031
* The carcase for high-gloss fronts is in matt lacquer in the matching colour.
Handles
Handles
Lacquer
High-gloss
Veneer
Wood/lacquer/high-gloss versions – Design A plus with side filletsModel no. Carcase*/front Price group
White lacquerWool white lacquerSand lacquerGrey lacquer
High-gloss pure white*High-gloss white*High-gloss sand*High-gloss grey*
Structured beechNatural oakLight brown ashCore walnutCherrywood gold
IIII
IIIIIIII
IIIIIIIIII
011(standard handle)012014 / 015026 / 013029 / 030032 / 033034 / 035031
* The carcase for high-gloss fronts is in matt lacquer in the matching colour.
Handles
Lacquer
High-gloss
Veneer
Wood/lacquer/high-gloss versions – Design GModel no. Carcase*/front Price group
White lacquerWool white lacquerSand lacquerGrey lacquer
High-gloss pure white*High-gloss white*High-gloss sand*High-gloss grey*
Structured beechNatural oakLight brown ashCore walnutCherrywood gold
IIII
IIIIIIII
IIIIIIIIII
* The carcase for high-gloss fronts is in matt lacquer in the matching colour.
Lacquer
Veneer
White lacquerWool white lacquerSand lacquerGrey lacquer
Structured beechNatural oakLight brown ashCore walnutCherrywood gold
Application/side filletsModel no.
030(standard handle)029
Handles
Lacquer
High-gloss
Veneer
Wood/lacquer/high-gloss versions – Design G plus with side filletsModel no. Carcase*/front Price group
White lacquerWool white lacquerSand lacquerGrey lacquer
High-gloss pure white*High-gloss white*High-gloss sand*High-gloss grey*
Structured beechNatural oakLight brown ashCore walnutCherrywood gold
IIII
IIIIIIII
IIIIIIIIII
* The carcase for high-gloss fronts is in matt lacquer in the matching colour.
Lacquer
Veneer
Pure white lacquerWhite lacquerWool white lacquerSand lacquerGrey lacquer
Structured beechNatural oakLight brown ashCore walnutCherrywood gold
Model no. Side fillets
D01D100D02D03
D05D06D07
D101
D09D102D11D12D13
D14D106D15D16
D49D108D51D52D53
D61D103D62D63
D65D66D67D104
D69D105D71D72D73
D14D106D15D16
D18D19D20D107
D49D108D51D52D53
D74D109D75D76
D82D111D84D85D86
D74D109D75D76
D78D79D80D110
D82D111D84D85D86
D60D61D103D62D63
D69D105D71D72D73
175
MULTI-FORMA II
E Schlafen: MULTI-FORMA II Seite 175 4. 2014 E
Lacquer
High-gloss
Veneer
VeneerHigh-gloss
Wood/lacquer/high-gloss versions – Design LModel no. Carcase*/front Price group
High-gloss pure white*High-gloss white*High-gloss sand*High-gloss grey*
Pure white lacquerWhite lacquerSand lacquerGrey lacquer
Structured beechNatural oakLight brown ashCore walnutCherrywood gold
ApplicationModel no.
011(standard handle)012014 / 015026 / 013034 / 035
* The carcase for high-gloss fronts is in matt lacquer in the matching colour.The carcase is available in all the different versions (see e.g. Design G). Please state clearly in the order! If the carcase is required in Cherrywood gold, price group III is charged.
Wood/lacquer/high-gloss versions – Design F
Model no. Carcase*/front Price group
White lacquerWool white lacquerSand lacquerGrey lacquer
High-gloss pure white*High-gloss white*High-gloss sand*High-gloss grey*
Structured beechNatural oakLight brown ashCore walnutCherrywood gold
Structured beechNatural oakLight brown ashCore walnutCherrywood gold
ApplicationModel no. Formed woodenhandle
* The carcase for high-gloss fronts is in matt lacquer in the matching colour.
Handles
IIIIIIII
Lacquer
Veneer
IIII
IIIIIIII
IIIIIIIIII
Lacquer
Veneer
Wood/lacquer versions – Design R
Model no. Carcase/front Price group
White lacquer
Structured beechNatural oakLight brown ashCore walnutCherrywood gold
011(standard handle)012014 / 015026 / 013029 / 030032 / 033034 / 035031
Handles
I
IIIIIIIIII
Lacquer
High-gloss
Veneer
Wood/lacquer/high-gloss versions – Design F plus with side fillets
Model no. Carcase*/front Price group
White lacquerWool white lacquerSand lacquerGrey lacquer
High-gloss pure white*High-gloss white*High-gloss sand*High-gloss grey*
Structured beechNatural oakLight brown ashCore walnutCherrywood gold
Structured beechNatural oakLight brown ashCore walnutCherrywood gold
Application/side filletsModel no. Formed wooden
handle
* The carcase for high-gloss fronts is in matt lacquer in the matching colour.
Veneer
IIII
IIIIIIII
IIIIIIIIII
With the MULTI-FORMA II hinge- and folding-door wardrobes and the intermediate units (only available in Design A) you can choose the carcase and the frontin a different version. Please state this clearly in the order. When versions from different price groups are exchanged, the higher price group is always charged.
Changing versions
D26D27D28D112
D59D22D23D24
D30D113D32D33D34
D41D115D42D43
D45D46D47D116
D54D117D56D57D58
D54D117D56D57D58
D35
D36D114D38D39D40
D87D118D88D89
D91D92D93
D119
D95D120D97D98D99
D95D120D97D98D99
176E Schlafen: MULTI-FORMA II Seite 176 4. 2014E
Wardrobes according to the endless assembly principleHinge- and folding-door wardrobes can be planned endlessly and combined with one another. Due to the various element widths one can create many total wardrobe widths. In thisway the available floor space can be exploited to the full. For each wardrobe combination, the first element on the left is considered to be the basic unit, incorporating both outer side-sections. One can only include one basic unit in each combination. When adding on extension units, the right-hand side-section of the basic unit is employed as the end side-sectionof the complete combination. In the case of single-door hinge-door units as well as folding-door wardrobes one can choose between left- and right-hand hinges. The graphics shownbelow give you an excerpt of our wardrobe assortment. For a more varied look, we suggest using intermediate units for creating some alternatives.
Standard interior fittings per unit: 2 fitted shelves, 1 clothes rod, for hinge-door wardrobes in 337.8 cm height also with one fitted shelf in the top wardrobe unit. Wardrobe interior fittings optionally in white lacquer (standard), light interior veneer or dark interior veneer (see here page 173). Please state in the order!
Wardrobe examples for hinge-door wardrobes
Hinge- and folding-door wardrobes
● Hinge-door wardrobes can be combined with folding-door wardrobes and intermediate units
● Optionally available with many different handles (see page 173)● Straight units and profiled end units● Mirror fronts for doors in Design A, A plus, F and F plus at a surcharge● Passepartout, cornice and lamps at a surcharge● Top LED lamps at a surcharge● 3 different basic heights: 229.6; 268.0; 337.8 cm● Unit outside widths: 42, 52, 72, 82, 102 cm (basic units)
40, 50, 70, 80, 100 cm (extension units)● Unit inside widths: 38, 48, 68, 78, 98 cm● Outside depth: 61.6 cm● Inside depth: 56.0 cm
For calculating the total width when fitting a passepartout (or a cornice withlamp), please note the protrusion of 1.7 cm (or 0.5 cm) left and right!
● Folding-door wardrobes can be combined with hinge-door wardrobes and intermediate units
● Optionally available with many different handles (see page 173)● Extra-wide panorama units in 160/162 and 200/202 cm width without partition ● Mirror fronts for doors in Design A, A plus, F and F plus at a surcharge● Passepartout, cornice and lamps at a surcharge● Top LED lamps at a surcharge● 2 different basic heights: 229.6; 268.0 cm● Unit outside widths: 82, 102, 162, 202 cm (basic units)
80, 100, 160, 200 cm (extension units)● Unit inside widths: 78, 98, 158, 198 cm● Outside depth: 61.6 cm● Inside depth: 56.0 cm
For calculating the total width when fitting a passepartout (or a cornice withlamp), please note the protrusion of 1.7 cm (or 0.5 cm) left and right!
Wardrobe examples for folding-door wardrobes
Folding-door wardrobe in 229.6 cm heightHinge-door wardrobe in 229.6 cm height
Hinge-door wardrobe in 268.0 cm height Folding-door wardrobe in 268.0 cm height
Hinge-door wardrobe in 337.8 cm height Important note:The hinge-door wardrobe height of 337.8 cm consists of a top wardrobe unit,standard 69.8 cm high, and of a lower wardrobe unit. The wardrobe sides andthe full-length hinge-doors are split visually. In the case of height reductions, thelower wardrobe unit is always reduced in height.Standard interior fittings per unit:in lower wardrobe unit: 2 fitted shelves, 1 clothes rodin top wardrobe unit: 1 fitted shelf
177
MULTI-FORMA II
E Schlafen: MULTI-FORMA II Seite 177 4. 2014 E
Hinge- and folding-door wardrobes
Examples of wardrobes with hinge-door corner units, intermediate units, special sizes; lamps
● Intermediate units can only be supplied in Design A● Intermediate units can be combined with hinge- and folding-door wardrobes.
Two intermediate units can also be placed adjacent to one another (exception:intermediate units 1 and 4).
● Optionally available with many different handles (see page 195● Many different intermediate units with various features (see pages 196-198)● Outside depth: 61.6 cm
● See ”Special-sized products” chapter for notes on side sloping and further specialsizes
● Hinge-door corner wardrobes can be combined with hinge-/folding-door wardrobes and intermediate units
● Optionally available with many different handles (see page 173)● Hinge-door corner wardrobe 45° with 1 fitted shelf without clothes rod and 1 fitted
shelf with clothes rod● Hinge-door corner wardrobe with fully accessible corner 90° with 2 fitted shelves
and 1 clothes rod each left and right ● 3 different basic heights: 229.6; 268.0; 337.8 cm● Unit outside widths: 97.3 x 97.3 or 112.7 x 112.7 cm (basic units)
95.3 x 97.3 or 110.7 x 112.7 cm (extension units)● Outside depth: 61.6 cm● Inside depth: 56.0 cm
For calculating the total width when fitting a passepartout (or a cornice withlamp), please note the protrusion of 1.7 cm (or 0.5 cm) left and right!
Hinge-door corner wardrobe 45°
Hinge-door corner wardrobe with fully accessible corner 90°
with integrated intermediate unit 4
with integrated intermediate unit 3 and side sloping
Lamps
Remote control unitSurcharge for remote control unit (transmitter + receiver) type 379 = Surcharge for extra transmitter type 3791 = Surcharge for extra receiver type 3792 =
4-channel remote control unit is also possible(see chapter "Switch options for lamps")!
Cornice with integrated LED spotlampsSurcharge for each additional spotlamp type 369 = Price reduction for one spotlamp (if not required in cornice) type 368 =
Cornice with integrated light panelsSurcharge for each additional light panel type 3681 = Price reduction for one light panel (if not required in cornice) type 3680 =
Top LED lampSurcharge for each additional lamp type 3691 =
All hinge- and folding-door wardrobes are available with an optional cornice and LED lamps or with atop LED lamp. Either one integrated LED spotlamp (12 V, 1 W), one light panel (230 V, 8 W) or one topLED lamp (12 V, 2.4 W) is fitted standard above each unit – 1 or 2 door. Exception: in the case ofpanorama units two integrated LED spotlamps (or two light panels or two top LED lamps) are fitted.
If required, an integrated LED spotlamp, a light panel or a top LED lamp can be fitted centrally aboveeach door. It is also possible to remove individual spotlamps or light panels with a price reduction.Please include a sketch in all cases.
Switching is done standard by an external footswitch. A remote control unit is also available as an alternative, which is charged extra. The remote control unit incorporates a transmitter, with which the entire cornice lighting can be switched on and off. Extra transmitters are available at asurcharge. The footswitch is omitted when the remote control unit is employed.
When an intermediate unit with integrated LED lamps and top LED lamps or a cornice with LEDlamps are included together, the switch is coupled.
Please note: When planning a cornice, please note that a minimum distance of 2.0 cm to the ceilingmust be observed.
with passepartout with passepartout and top LED lamp
Height reductions at intervals of 1 mm, width and depth reductions at intervals of 1.0 cm without surcharge; when reducing the height of doors in Design L only the top and bottom door panels are reduced in height (the middle panels always retain their original height). Width reductions are not possible on doors with high-gloss fronts in Design A, G and F.
61.6 cm 72.0 cm
see pages 178-193Widths
Depths (without handles)
Heightssee sizes without cornice
+ 2.9 cmsee sizes without cornice
+ 7.9 cm
with cornice incl. lamp
see sizes without cornice+ 4.6 cm
70.3 cm
with top LED lamp
see sizes without cornice+ 5.0 cm
72.0 cm
without cornice
61.6 cm
229.6; 268.0 and 337.8 cm
Dims.
0
0
178E Schlafen: MULTI-FORMA II Seite 178 4. 2014E
Hinge-door wardrobes – Basic units List of versions: see pages 174-175
L/R = door hinge left/right
For each project please remember to leave a 2.0 cmgap to the ceiling and at the side for assembly!
L
Height: 229.6; 268.0 and 337.8 cm (Heights with passepartout and/or top LED lamp or cornice incl. lamp: see table page 177)Width: see table (Widths with passepartout: + 1.7 cm each side; with cornice: + 0.5 cm each side)Depth: 61.6 cm (Depths with passepartout and/or top LED lamp or cornice incl. lamp: see table page 177)
Basic unitswith 2 outer side-sections (each 2 cm thick)For each wardrobe combination, the first element onthe left is considered to be the basic unit, incorporatingboth outer side-sections. One can only include onebasic unit in each combination. When adding on exten-sion units, the right-hand side-section of the basic unitis employed as the end side-section of the completecombination.The surcharge for the passepartout frame of the basicunits includes the left- and right-hand vertical frame aswell as the horizontal frame, the surcharge for theextension units only includes the horizontal frame.When adding on extension units, the right-hand frameof the passepartout of the basic unit is employed as theend unit of the complete combination.Cornice and passepartout unit are full-length up to302 cm width.
Single-door unit,left or right,42 cm wide
229.6 cm
high
IIIIII
268.0 cm
high
337.8 cm
high
IIIIII
IIIIII
Design A Design G Design L
A20101LA201012R
229.6 cm
high
IIIIII
268.0 cm
high
337.8 cm
high
IIIIII
IIIIII
229.6 cm
high
IIIIII
268.0 cm
high
337.8 cm
high
IIIIII
IIIIII
Design R
G20101LG201012R
L20101LL201012R
–
R20101LR201012R
A30101LA301012R
G30101LG301012R
L30101LL301012R
–
R30101LR301012R
A40101LA401012R
G40101LG401012R
L40101LL401012R
–
R40101LR401012R
A20102LA201022R
G20102LG201022R
L20102LL201022R
–
R20102LR201022R
A30102LA301022R
G30102LG301022R
L30102LL301022R
–
R30102LR301022R
A40102LA401022R
G40102LG401022R
L40102LL401022R
–
R40102LR401022R
A02011LA02012R
G02011LG02012R
L02011LL02012R
–
R02011LR02012R
A03011LA03012R
G03011LG03012R
L03011LL03012R
–
R03011LR03012R
A04011LA04012R
G04011LG04012R
L04011LL04012R
–
R04011LR04012R
Left profiled end unit,single door, left or right,72 cm wide
Left profiled end unit,single door, left or right,82 cm wide
L
L
Mirrors are possible on the hinge-door and on the slopingside! Please state clearly in the order! In this case 2 mirrors must be ordered.
Mirrors are possible on the hinge-door and on the slopingside! Please state clearly in the order! In this case 2 mirrors must be ordered.
Design A pluswith side fillets
AP20101LAP201012R
AP30101LAP301012R
AP40101LAP401012R
AP20102LAP201022R
AP30102LAP301022R
AP40102LAP401022R
AP02011LAP02012R
AP03011LAP03012R
AP04011LAP04012R
Design G pluswith side fillets
GP20101LGP201012R
GP30101LGP301012R
GP40101LGP401012R
GP20102LGP201022R
GP30102LGP301022R
GP40102LGP401022R
GP02011LGP02012R
GP03011LGP03012R
GP04011LGP04012R
179
MULTI-FORMA II
E Schlafen: MULTI-FORMA II Seite 179 4. 2014 E
Hinge-door wardrobes – Basic units
L/R = door hinge left/right
Please state the versions for the handlesand the wardrobe interior fittings!
Please also note the functional and high-qualitywardrobe interior fittings as well as the special articles and possible special-sized productsin the separate chapters on "Wardrobe interiorfittings" and "Special products".
Surcharge for mirror:Each wardrobe door in Design A, A plus, F and F plus can be fitted with an optional mirror (vertical facet) which is charged extra (mirrorsnot possible for Design G, G plus, L and R).
Surcharge for cornice with integrated
LED spotlamps
(12 V; 1 W)
1 spotlamp per unit
Surcharge for top LED lamp
(12 V; 2.4 W)
1 lamp per unit
Surcharge forpassepartout
Please mark exactly in the front sketch, or state in the order (from the left), whichhinge-doors are to be fitted with a mirror.
Surcharge for mirror per hinge-door:
Design F pluswith side fillets
FP20101LFP201012R
3390 3391380
FP30101LFP301012R
3390 3391380
FP40101LFP401012R
3390 3391380
FP20102LFP201022R
3400 3401380
FP30102LFP301022R
3400 3401380
FP40102LFP401022R
3400 3401380
FP02011LFP02012R
341 3410 3411380
FP03011LFP03012R
3413 3410 3411380
FP04011LFP04012R
3414 3410 3411380
Surcharge for cornice with integrated light panels
(230 V; 8 W)
1 lamp per unit
Design F
F20101LF201012R
F30101LF301012R
F40101LF401012R
F20102LF201022R
F30102LF301022R
F40102LF401022R
F02011LF02012R
F03011LF03012R
F04011LF04012R
Height: 229.6; 268.0 and 337.8 cm (Heights with passepartout and/or top LED lamp or cornice incl. lamp: see table page 177)Width: see table (Widths with passepartout: + 1.7 cm each side; with cornice: + 0.5 cm each side)Depth: 61.6 cm (Depths with passepartout and/or top LED lamp or cornice incl. lamp: see table page 177)
180E Schlafen: MULTI-FORMA II Seite 180 4. 2014E
Hinge-door wardrobes – Basic units List of versions: see pages 174-175
For each project please remember to leave a 2.0 cmgap to the ceiling and at the side for assembly!
L
Twin-door unit,82 cm wide
Twin-door unit,102 cm wide
A2011LA2012R
G2011LG2012R
L2011LL2012R
–
R2011LR2012R
A3011LA3012R
G3011LG3012R
L3011LL3012R
–
R3011LR3012R
A4011LA4012R
G4011LG4012R
L4011LL4012R
–
R4011LR4012R
A0202 G0202 L0202
–
R0202
A0302 G0302 L0302
–
R0302
A0402 G0402 L0402
–
R0402
A202 G202 L202
–
R202
A302 G302 L302
–
R302
A402 G402 L402
–
R402
Single-door unit,left or right,52 cm wide
Height: 229.6; 268.0 and 337.8 cm (Heights with passepartout and/or top LED lamp or cornice incl. lamp: see table page 177)Width: see table (Widths with passepartout: + 1.7 cm each side; with cornice: + 0.5 cm each side)Depth: 61.6 cm (Depths with passepartout and/or top LED lamp or cornice incl. lamp: see table page 177)
Basic unitswith 2 outer side-sections (each 2 cm thick)For each wardrobe combination, the first element onthe left is considered to be the basic unit, incorporatingboth outer side-sections. One can only include onebasic unit in each combination. When adding on exten-sion units, the right-hand side-section of the basic unitis employed as the end side-section of the completecombination.The surcharge for the passepartout frame of the basicunits includes the left- and right-hand vertical frame aswell as the horizontal frame, the surcharge for theextension units only includes the horizontal frame.When adding on extension units, the right-hand frameof the passepartout of the basic unit is employed as theend unit of the complete combination.Cornice and passepartout unit are full-length up to302 cm width.
Design A Design G Design L Design RDesign A pluswith side fillets
Design G pluswith side fillets
229.6 cm
high
IIIIII
268.0 cm
high
337.8 cm
high
IIIIII
IIIIII
229.6 cm
high
IIIIII
268.0 cm
high
337.8 cm
high
IIIIII
IIIIII
229.6 cm
high
IIIIII
268.0 cm
high
337.8 cm
high
IIIIII
IIIIII
AP2011LAP2012R
AP3011LAP3012R
AP4011LAP4012R
AP0202
AP0302
AP0402
AP202
AP302
AP402
GP2011LGP2012R
GP3011LGP3012R
GP4011LGP4012R
GP0202
GP0302
GP0402
GP202
GP302
GP402
L/R = door hinge left/right
181
MULTI-FORMA II
E Schlafen: MULTI-FORMA II Seite 181 4. 2014 E
Please also note the functional and high-qualitywardrobe interior fittings as well as the special articles and possible special-sized productsin the separate chapters on "Wardrobe interiorfittings" and "Special products".
MULTI-FORMA IIHinge-door wardrobes – Basic unitsPlease state the versions for the handles
and the wardrobe interior fittings!
F2011LF2012R
342 3420 3421380
F3011LF3012R
3423 3420 3421380
F4011LF4012R
3424 3420 3421380
F0202 343 3430 3431380
F0302 3433 3430 3431380
F0402 3434 3430 3431380
F202 344 3440 3441380
F302 3443 3440 3441380
F402 3444 3440 3441380
Design F pluswith side fillets
Design F
FP2011LFP2012R
FP3011LFP3012R
FP4011LFP4012R
FP0202
FP0302
FP0402
FP202
FP302
FP402
L/R = door hinge left/right
Surcharge for mirror:Each wardrobe door in Design A, A plus, F and F plus can be fitted with an optional mirror (vertical facet) which is charged extra (mirrorsnot possible for Design G, G plus, L and R).
Surcharge for cornice with integrated
LED spotlamps
(12 V; 1 W)
1 spotlamp per unit
Surcharge for top LED lamp
(12 V; 2.4 W)
1 lamp per unit
Surcharge forpassepartout
Surcharge for cornice with integrated light panels
(230 V; 8 W)
1 lamp per unit
Please mark exactly in the front sketch, or state in the order (from the left), whichhinge-doors are to be fitted with a mirror.
Surcharge for mirror per hinge-door:
Height: 229.6; 268.0 and 337.8 cm (Heights with passepartout and/or top LED lamp or cornice incl. lamp: see table page 177)Width: see table (Widths with passepartout: + 1.7 cm each side; with cornice: + 0.5 cm each side)Depth: 61.6 cm (Depths with passepartout and/or top LED lamp or cornice incl. lamp: see table page 177)
182E Schlafen: MULTI-FORMA II Seite 182 4. 2014E
Hinge-door wardrobes – Extension unitsFor each project please remember to leave a 2.0 cmgap to the ceiling and at the side for assembly!
List of versions: see pages 174-175
L/R = door hinge left/right
229.6 cm
high
IIIIII
268.0 cm
high
337.8 cm
high
IIIIII
IIIIII
A001011LA00101R
229.6 cm
high
IIIIII
268.0 cm
high
337.8 cm
high
IIIIII
IIIIII
229.6 cm
high
IIIIII
268.0 cm
high
337.8 cm
high
IIIIII
IIIIII
R
Single-door unit,left or right,40 cm wide
G001011LG00101R
L001011LL00101R
–
R001011LR00101R
A101011LA10101R
G101011LG10101R
L101011LL10101R
–
R101011LR10101R
A701011L A70101R
G701011L G70101R
L701011L L70101R
–
R701011L R70101R
A001021LA00102R
G001021LG00102R
L001021LL00102R
–
R001021LR00102R
A101021LA10102R
G101021LG10102R
L101021LL10102R
–
R101021LR10102R
A701021LA70102R
G701021LG70102R
L701021LL70102R
–
R701021LR70102R
A00011LA00012R
G00011LG00012R
L00011LL00012R
–
R00011LR00012R
A01011LA01012R
G01011LG01012R
L01011LL01012R
–
R01011LR01012R
A71011LA71012R
G71011LG71012R
L71011LL71012R
–
R71011LR71012R
R
Right profiled end unit,single door, left or right,70 cm wide
R
Right profiled end unit,single door, left or right,80 cm wide
Height: 229.6; 268.0 and 337.8 cm (Heights with passepartout and/or top LED lamp or cornice incl. lamp: see table page 177)Width: see table (Widths with passepartout: + 1.7 cm each side; with cornice: + 0.5 cm each side)Depth: 61.6 cm (Depths with passepartout and/or top LED lamp or cornice incl. lamp: see table page 177)
Mirrors are possible on the hinge-door and on the slopingside! Please state clearly in the order! In this case 2 mirrors must be ordered.
Mirrors are possible on the hinge-door and on the slopingside! Please state clearly in the order! In this case 2 mirrors must be ordered.
Design A Design G Design L Design RDesign A pluswith side fillets
Design G pluswith side filletsExtension units
with 1 centre partition (2 cm thick)The surcharge for the passepartout frame of theextension units only includes the horizontalframe. When adding on extension units, the right-hand frame of the passepartout of the basic unitis employed as the end unit of the complete combination.Cornice and passepartout unit are full-lengthup to 302 cm width.
AP001011LAP00101R
AP101011LAP10101R
AP701011L AP70101R
AP001021LAP00102R
AP101021LAP10102R
AP701021LAP70102R
AP00011LAP00012R
AP01011LAP01012R
AP71011LAP71012R
GP001011LGP00101R
GP101011LGP10101R
GP701011L GP70101R
GP001021LGP00102R
GP101021LGP10102R
GP701021LGP70102R
GP00011LGP00012R
GP01011LGP01012R
GP71011LGP71012R
183
MULTI-FORMA II
E Schlafen: MULTI-FORMA II Seite 183 4. 2014 E
Hinge-door wardrobes – Extension units
L/R = door hinge left/right
Please state the versions for the handlesand the wardrobe interior fittings!
Please also note the functional and high-qualitywardrobe interior fittings as well as the special articles and possible special-sized productsin the separate chapters on "Wardrobe interiorfittings" and "Special products".
F001011LF00101R
3450 3451382
F101011LF10101R
3450 3451382
F701011L F70101R
3450 3451382
F001021LF00102R
3630 3631382
F101021LF10102R
3630 3631382
F701021LF70102R
3630 3631382
F00011LF00012R
346 3460 3461382
F01011LF01012R
346 3460 3461382
F71011LF71012R
346 3460 3461382
Design F pluswith side fillets
Design F
FP001011LFP00101R
FP101011LFP10101R
FP701011L FP70101R
FP001021LFP00102R
FP101021LFP10102R
FP701021LFP70102R
FP00011LFP00012R
FP01011LFP01012R
FP71011LFP71012R
Surcharge for mirror:Each wardrobe door in Design A, A plus, F and F plus can be fitted with an optional mirror (vertical facet) which is charged extra (mirrorsnot possible for Design G, G plus, L and R).
Surcharge for cornice with integrated
LED spotlamps
(12 V; 1 W)
1 spotlamp per unit
Surcharge for top LED lamp
(12 V; 2.4 W)
1 lamp per unit
Surcharge forpassepartout
Surcharge for cornice with integrated light panels
(230 V; 8 W)
1 lamp per unit
Please mark exactly in the front sketch, or state in the order (from the left), whichhinge-doors are to be fitted with a mirror.
Surcharge for mirror per hinge-door:
Height: 229.6; 268.0 and 337.8 cm (Heights with passepartout and/or top LED lamp or cornice incl. lamp: see table page 177)Width: see table (Widths with passepartout: + 1.7 cm each side; with cornice: + 0.5 cm each side)Depth: 61.6 cm (Depths with passepartout and/or top LED lamp or cornice incl. lamp: see table page 177)
184E Schlafen: MULTI-FORMA II Seite 184 4. 2014E
Hinge-door wardrobes – Extension units List of versions: see pages 174-175
For each project please remember to leave a 2.0 cmgap to the ceiling and at the side for assembly!
R
Single-door unit,left or right,50 cm wide
Twin-door unit,80 cm wide
Twin-door unit,100 cm wide
229.6 cm
high
IIIIII
268.0 cm
high
337.8 cm
high
IIIIII
IIIIII
A0011LA0012R
229.6 cm
high
IIIIII
268.0 cm
high
337.8 cm
high
IIIIII
IIIIII
229.6 cm
high
IIIIII
268.0 cm
high
337.8 cm
high
IIIIII
IIIIII
G0011LG0012R
L0011LL0012R
–
R0011LR0012R
A1011LA1012R
G1011LG1012R
L1011LL1012R
–
R1011LR1012R
A7011LA7012R
G7011LG7012R
L7011LL7012R
–
R7011LR7012R
A0002 G0002 L0002
–
R0002
A0102 G0102 L0102
–
R0102
A7102 G7102 L7102
–
R7102
A002 G002 L002
–
R002
A102 G102 L102
–
R102
A702 G702 L702
–
R702
Height: 229.6; 268.0 and 337.8 cm (Heights with passepartout and/or top LED lamp or cornice incl. lamp: see table page 177)Width: see table (Widths with passepartout: + 1.7 cm each side; with cornice: + 0.5 cm each side)Depth: 61.6 cm (Depths with passepartout and/or top LED lamp or cornice incl. lamp: see table page 177)
Extension unitswith 1 centre partition (2 cm thick)The surcharge for the passepartout frame of theextension units only includes the horizontalframe. When adding on extension units, the right-hand frame of the passepartout of the basic unitis employed as the end unit of the complete combination.Cornice and passepartout unit are full-lengthup to 302 cm width.
L/R = door hinge left/right
Design A Design G Design L Design RDesign A pluswith side fillets
Design G pluswith side fillets
AP0011LAP0012R
AP1011LAP1012R
AP7011LAP7012R
AP0002
AP0102
AP7102
AP002
AP102
AP702
GP0011LGP0012R
GP1011LGP1012R
GP7011LGP7012R
GP0002
GP0102
GP7102
GP002
GP102
GP702
185
MULTI-FORMA II
E Schlafen: MULTI-FORMA II Seite 185 4. 2014 E
Please also note the functional and high-qualitywardrobe interior fittings as well as the special articles and possible special-sized productsin the separate chapters on "Wardrobe interiorfittings" and "Special products".
Hinge-door wardrobes – Extension unitsPlease state the versions for the handles
and the wardrobe interior fittings!
F0011LF0012R
347 3470 3471382
F1011LF1012R
347 3470 3471382
F7011LF7012R
347 3470 3471382
F0002 348 3480 3481382
F0102 348 3480 3481382
F7102 348 3480 3481382
F002 349 3490 3491382
F102 349 3490 3491382
F702 349 3490 3491382
Design F pluswith side fillets
Design F
FP0011LFP0012R
FP1011LFP1012R
FP7011LFP7012R
FP0002
FP0102
FP7102
FP002
FP102
FP702
Surcharge for mirror:Each wardrobe door in Design A, A plus, F and F plus can be fitted with an optional mirror (vertical facet) which is charged extra (mirrorsnot possible for Design G, G plus, L and R).
Surcharge for cornice with integrated
LED spotlamps
(12 V; 1 W)
1 spotlamp per unit
Surcharge for top LED lamp
(12 V; 2.4 W)
1 lamp per unit
Surcharge forpassepartout
Surcharge for cornice with integrated light panels
(230 V; 8 W)
1 lamp per unit
Please mark exactly in the front sketch, or state in the order (from the left), whichhinge-doors are to be fitted with a mirror.
Surcharge for mirror per hinge-door:
Height: 229.6; 268.0 and 337.8 cm (Heights with passepartout and/or top LED lamp or cornice incl. lamp: see table page 177)Width: see table (Widths with passepartout: + 1.7 cm each side; with cornice: + 0.5 cm each side)Depth: 61.6 cm (Depths with passepartout and/or top LED lamp or cornice incl. lamp: see table page 177)
L/R = door hinge left/right
186E Schlafen: MULTI-FORMA II Seite 186 4. 2014E
Folding-door wardrobes – Basic unitsFor each project please remember to leave a 2.0 cmgap to the ceiling and at the side for assembly!
List of versions: see pages 174-175
L/R = door hinge left/right
229.6 cm
high
IIIIII
A2520 G2520 L2520
–
R2520
268.0 cm
high
IIIIII
A3520 G3520 L3520
–
R3520
229.6 cm
high
IIIIII
A2420 G2420 L2420
–
R2420
268.0 cm
high
IIIIII
A3420 G3420 L3420
–
R3420
229.6 cm
high
IIIIII
A2321LA2322R
G2321LG2322R
L2321LL2322R
–
R2321LR2322R
268.0 cm
high
IIIIII
A3321LA3322R
G3321LG3322R
L3321LL3322R
–
R3321LR3322R
Twin-door unit,left or right,82 cm wide
Twin-door unit,left or right,102 cm wide
Panorama unit,4-door, 162 cm wide;without partition
Panorama unit,4-door, 202 cm wide;without partition
L
L
229.6 cm
high
IIIIII
A2221LA2222R
G2221LG2222R
L2221LL2222R
–
R2221LR2222R
268.0 cm
high
IIIIII
A3221LA3222R
G3221LG3222R
L3221LL3222R
–
R3221LR3222R
Height: 229.6 and 268.0 cm (Heights with passepartout and/or top LED lamp or cornice incl. lamp: see table page 177)Width: see table (Widths with passepartout: + 1.7 cm each side; with cornice: + 0.5 cm each side)Depth: 61.6 cm (Depths with passepartout and/or top LED lamp or cornice incl. lamp: see table page 177)
Basic unitswith 2 outer side-sections (each 2 cm thick)For each wardrobe combination, the first element onthe left is considered to be the basic unit, incorporatingboth outer side-sections. One can only include onebasic unit in each combination. When adding on exten-sion units, the right-hand side-section of the basic unitis employed as the end side-section of the completecombination.The surcharge for the passepartout frame of the basicunits includes the left- and right-hand vertical frame aswell as the horizontal frame, the surcharge for theextension units only includes the horizontal frame.When adding on extension units, the right-hand frameof the passepartout of the basic unit is employed as theend unit of the complete combination.Cornice and passepartout unit are full-length up to302 cm width.
Design A Design G Design L Design RDesign A pluswith side fillets
Design G pluswith side fillets
AP2520
AP3520
AP2420
AP3420
AP2321LAP2322R
AP3321LAP3322R
AP2221LAP2222R
AP3221LAP3222R
GP2520
GP3520
GP2420
GP3420
GP2321LGP2322R
GP3321LGP3322R
GP2221LGP2222R
GP3221LGP3222R
187
MULTI-FORMA II
E Schlafen: MULTI-FORMA II Seite 187 4. 2014 E
Folding-door wardrobes – Basic units
L/R = door hinge left/right
Please state the versions for the handlesand the wardrobe interior fittings!
Please also note the functional and high-qualitywardrobe interior fittings as well as the special articles and possible special-sized productsin the separate chapters on "Wardrobe interiorfittings" and "Special products".
F2520 353 3530 3531381
F3520 3533 3530 3531381
F2420 352 3520 3521381
F3420 3523 3520 3521381
F2321LF2322R
351 3510 3511380
F3321LF3322R
3513 3510 3511380
F2221LF2222R
350 3500 3501380
F3221LF3222R
3503 3500 3501380
2 lamps 2 spotlamps 2 lamps
2 lamps 2 spotlamps 2 lamps
2 lamps 2 spotlamps 2 lamps
2 lamps 2 spotlamps 2 lamps
Design F pluswith side fillets
Design F
FP2520
FP3520
FP2420
FP3420
FP2321LFP2322R
FP3321LFP3322R
FP2221LFP2222R
FP3221LFP3222R
Surcharge for mirror:Each wardrobe door in Design A, A plus, F and F plus can be fitted with an optional mirror (vertical facet) which is charged extra (mirrorsnot possible for Design G, G plus, L and R).
Surcharge for cornice with integrated
LED spotlamps
(12 V; 1 W)
1 spotlamp per unit
Surcharge for top LED lamp
(12 V; 2.4 W)
1 lamp per unit
Surcharge forpassepartout
Surcharge for cornice with integrated light panels
(230 V; 8 W)
1 lamp per unit
Please mark exactly in the front sketch, or state in the order (from the left), which folding-door wings are to be fitted with
a mirror.
Surcharge for mirror per folding-door wing:
Height: 229.6 and 268.0 cm (Heights with passepartout and/or top LED lamp or cornice incl. lamp: see table page 177)Width: see table (Widths with passepartout: + 1.7 cm each side; with cornice: + 0.5 cm each side)Depth: 61.6 cm (Depths with passepartout and/or top LED lamp or cornice incl. lamp: see table page 177)
188E Schlafen: MULTI-FORMA II Seite 188 4. 2014E
Folding-door wardrobes – Extension units List of versions: see pages 174-175
Twin-door unit,left or right,80 cm wide
Twin-door unit,left or right,100 cm wide
Panorama unit,4-door, 160 cm wide;without partition
Panorama unit,4-door, 200 cm wide;without partition
R
R
229.6 cm
high
IIIIII
A0520 G0520 L0520
–
R0520
268.0 cm
high
IIIIII
A1520 G1520 L1520
–
R1520
229.6 cm
high
IIIIII
A0420 G0420 L0420
–
R0420
268.0 cm
high
IIIIII
A1420 G1420 L1420
–
R1420
229.6 cm
high
IIIIII
A0321LA0322R
G0321LG0322R
L0321LL0322R
–
R0321LR0322R
268.0 cm
high
IIIIII
A1321LA1322R
G1321LG1322R
L1321LL1322R
–
R1321LR1322R
229.6 cm
high
IIIIII
A0221LA0222R
G0221LG0222R
L0221LL0222R
–
R0221LR0222R
268.0 cm
high
IIIIII
A1221LA1222R
G1221LG1222R
L1221LL1222R
–
R1221LR1222R
Height: 229.6 and 268.0 cm (Heights with passepartout and/or top LED lamp or cornice incl. lamp: see table page 177)Width: see table (Widths with passepartout: + 1.7 cm each side; with cornice: + 0.5 cm each side)Depth: 61.6 cm (Depths with passepartout and/or top LED lamp or cornice incl. lamp: see table page 177)
Extension unitswith 1 centre partition (2 cm thick)The surcharge for the passepartout frame of theextension units only includes the horizontalframe. When adding on extension units, the right-hand frame of the passepartout of the basic unitis employed as the end unit of the complete combination.Cornice and passepartout unit are full-lengthup to 302 cm width.
L/R = door hinge left/right
Design A Design G Design L Design RDesign A pluswith side fillets
Design G pluswith side fillets
AP0520
AP1520
AP0420
AP1420
AP0321LAP0322R
AP1321LAP1322R
AP0221LAP0222R
AP1221LAP1222R
GP0520
GP1520
GP0420
GP1420
GP0321LGP0322R
GP1321LGP1322R
GP0221LGP0222R
GP1221LGP1222R
For each project please remember to leave a 2.0 cmgap to the ceiling and at the side for assembly!
189
MULTI-FORMA II
E Schlafen: MULTI-FORMA II Seite 189 4. 2014 E
Please also note the functional and high-qualitywardrobe interior fittings as well as the special articles and possible special-sized productsin the separate chapters on "Wardrobe interiorfittings" and "Special products".
Folding-door wardrobes – Extension unitsPlease state the versions for the handles
and the wardrobe interior fittings!
F0520 358 3580 3581383
F1520 358 3580 3581383
F0420 357 3570 3571383
F1420 357 3570 3571383
F0321LF0322R
356 3560 3561382
F1321LF1322R
356 3560 3561382
F0221LF0222R
355 3550 3551382
F1221LF1222R
355 3550 3551382
2 lamps 2 spotlamps 2 lamps
2 lamps 2 spotlamps 2 lamps
2 lamps 2 spotlamps 2 lamps
2 lamps 2 spotlamps 2 lamps
L/R = door hinge left/right
Design F pluswith side fillets
Design F
FP0520
FP1520
FP0420
FP1420
FP0321LFP0322R
FP1321LFP1322R
FP0221LFP0222R
FP1221LFP1222R
Surcharge for mirror:Each wardrobe door in Design A, A plus, F and F plus can be fitted with an optional mirror (vertical facet) which is charged extra (mirrorsnot possible for Design G, G plus, L and R).
Surcharge for cornice with integrated
LED spotlamps
(12 V; 1 W)
1 spotlamp per unit
Surcharge for top LED lamp
(12 V; 2.4 W)
1 lamp per unit
Surcharge forpassepartout
Surcharge for cornice with integrated light panels
(230 V; 8 W)
1 lamp per unit
Please mark exactly in the front sketch, or state in the order (from the left), whichfolding-door wings are to be fitted with
a mirror.
Surcharge for mirror per folding-door wing:
Height: 229.6 and 268.0 cm (Heights with passepartout and/or top LED lamp or cornice incl. lamp: see table page 177)Width: see table (Widths with passepartout: + 1.7 cm each side; with cornice: + 0.5 cm each side)Depth: 61.6 cm (Depths with passepartout and/or top LED lamp or cornice incl. lamp: see table page 177)
190E Schlafen: MULTI-FORMA II Seite 190 4. 2014E
Hinge-door corner wardrobes – Basic units
For each project please remember to leavea 2.0 cm gap to the ceiling and at the sidefor assembly!
List of versions: see pages 174-175
Hinge-door corner wardrobe 45°Interior fittings:1 fitted shelf without clothes rod 1 fitted shelf with clothes rod For production we require the details of series of assembly from left to right.
L/R = door hinge left/right
R
Basic unitswith 2 outer side-sections (each 2 cm thick)
For each wardrobe combination, the first elementon the left is considered to be the basic unit,incorporating both outer side-sections. One canonly include one basic unit in each combination.When adding on extension units, the right-handside-section of the basic unit is employed as theend side-section of the complete combination.Cornice and passepartout unit are full-lengthup to 302 cm width.
229.6 cm
high
IIIIII
268.0 cm
high
337.8 cm
high
IIIIII
IIIIII
229.6 cm
high
IIIIII
268.0 cm
high
337.8 cm
high
IIIIII
A22191LA22192R
G22191LG22192R
L22191LL22192R
–
R22191LR22192R
A32191LA32192R
G32191LG32192R
L32191LL32192R
–
R32191LR32192R
A42191LA42192R
G42191LG42192R
L42191LL42192R
–
R42191LR42192R
A25191LA25192R
G25191LG25192R
L25191LL25192R
–
R25191LR25192R
A35191LA35192R
G35191LG35192R
L35191LL35192R
–
R35191LR35192R
IIIIII
A45191LA45192R
G45191LG45192R
L45191LL45192R
–
R45191LR45192R
Height: 229.6; 268.0 and 337.8 cm (Heights with top LED lamp or cornice incl. lamp: see table page 177)Width: see table (Widths with cornice: + 0.5 cm each side)Depth: 61.6 cm (Depths with top LED lamp or cornice incl. lamp: see table page 177)
Hinge-door corner wardrobe withfully accessible corner 90°Twin-door unitLeft-hand type (L): left 2 fitted shelvesand 1 clothes rod, each 106.7 cmwide; right 2 fitted shelves and 1 clothes rod, each 52.5 cm wide Right-hand type (R): interior fittings inreverse orderFor production we require the detailsof series of assembly from left to right.
L
The door hinges of any 1-door wardrobeunits included which are situated directlynext to the hinge-door corner wardrobewith fully accessible corner 90° must befitted on the side next to this hinge-doorcorner wardrobe!
Depending on the handle version, the door hinges of any 1-door wardrobe unitswhich are situated directly next to thehinge-door corner wardrobe 45° must befitted on the side next to this hinge-doorcorner wardrobe (exception: this is notnecessary when fitting handles 011, 012,013 and 026)!
Design A Design G Design L Design RDesign A pluswith side fillets
Design G pluswith side fillets
AP22191LAP22192R
AP32191LAP32192R
AP42191LAP42192R
AP25191LAP25192R
AP35191LAP35192R
AP45191LAP45192R
GP22191LGP22192R
GP32191LGP32192R
GP42191LGP42192R
GP25191LGP25192R
GP35191LGP35192R
GP45191LGP45192R
191
MULTI-FORMA II
E Schlafen: MULTI-FORMA II Seite 191 4. 2014 E
Hinge-door corner wardrobes – Basic unitsPlease state the versions for the handles
and the wardrobe interior fittings!
Please also note the functional and high-qualitywardrobe interior fittings as well as the special articles and possible special-sized productsin the separate chapters on "Wardrobe interiorfittings" and "Special products".
F22191LF22192R
3600 3601380
F32191LF32192R
3600 3601380
F42191LF42192R
3600 3601380
F25191LF25192R
3610 3611381
F35191LF35192R
3610 3611381
F45191LF45192R
3610 3611381
2 lamps 2 spotlamps 2 lamps
2 lamps 2 spotlamps 2 lamps
2 lamps 2 spotlamps 2 lamps
Design F pluswith side fillets
Design F
FP22191LFP22192R
FP32191LFP32192R
FP42191LFP42192R
FP25191LFP25192R
FP35191LFP35192R
FP45191LFP45192R
Surcharge for mirror:Each wardrobe door in Design A, A plus, F and F plus can be fitted with an optional mirror (vertical facet) which is charged extra (mirrorsnot possible for Design G, G plus, L and R).
Surcharge for cornice with integrated
LED spotlamps
(12 V; 1 W)
1 spotlamp per unit
Surcharge for top LED lamp
(12 V; 2.4 W)
1 lamp per unit
Surcharge forpassepartout
Surcharge for cornice with integrated light panels
(230 V; 8 W)
1 lamp per unit
Please mark exactly in the front sketch, or state in the order (from the left), whichhinge-doors are to be fitted with a mirror.
Surcharge for mirror per hinge-door:
Height: 229.6; 268.0 and 337.8 cm (Heights with top LED lamp or cornice incl. lamp: see table page 177)Width: see table (Widths with cornice: + 0.5 cm each side)Depth: 61.6 cm (Depths with top LED lamp or cornice incl. lamp: see table page 177)
192E Schlafen: MULTI-FORMA II Seite 192 4. 2014E
Hinge-door corner wardrobe 45°Interior fittings:1 fitted shelf without clothes rod 1 fitted shelf with clothes rod For production we require the detailsof series of assembly from left to right.
L/R = door hinge left/right
A20191LA20192R
G20191LG20192R
L20191LL20192R
R20191LR20192R
A40191LA40192R
G40191LG40192R
L40191LL40192R
R40191LR40192R
A05191LA05192R
G05191LG05192R
L05191LL05192R
R05191LR05192R
R
229.6 cm
high
IIIIII
268.0 cm
high
337.8 cm
high
IIIIII
IIIIII
229.6 cm
high
IIIIII
268.0 cm
high
337.8 cm
high
IIIIII
–
–
–
–
–
IIIIII
A30191LA30192R
G30191LG30192R
L30191LL30192R
R30191LR30192R
A06191LA06192R
G06191LG06192R
L06191LL06192R
R06191LR06192R
–
A08191LA08192R
G08191LG08192R
L08191LL08192R
R08191LR08192R
Height: 229.6; 268.0 and 337.8 cm (Heights with passepartout and/or top LED lamp or cornice incl. lamp: see table page 177)Width: see table (Widths with passepartout: + 1.7 cm each side; with cornice: + 0.5 cm each side)Depth: 61.6 cm (Depths with passepartout and/or top LED lamp or cornice incl. lamp: see table page 177)
Hinge-door corner wardrobe withfully accessible corner 90°Twin-door unitLeft-hand type (L): left 2 fitted shelvesand 1 clothes rod, each 106.7 cmwide; right 2 fitted shelves and 1 clothes rod, each 52.5 cm wide Right-hand type (R): interior fittings inreverse orderFor production we require the detailsof series of assembly from left to right.
L
Extension unitswith 1 centre partition (2 cm thick)The surcharge for the passepartout frame of theextension units only includes the horizontalframe. When adding on extension units, the right-hand frame of the passepartout of the basic unitis employed as the end unit of the complete combination.Cornice and passepartout unit are full-lengthup to 302 cm width.
The door hinges of any 1-door wardrobeunits included which are situated directlynext to the hinge-door corner wardrobewith fully accessible corner 90° must befitted on the side next to this hinge-doorcorner wardrobe!
Depending on the handle version, the door hinges of any 1-door wardrobe unitswhich are situated directly next to thehinge-door corner wardrobe 45° must befitted on the side next to this hinge-doorcorner wardrobe (exception: this is notnecessary when fitting handles 011, 012,013 and 026)!
Design A Design G Design L Design RDesign A pluswith side fillets
Design G pluswith side fillets
Hinge-door corner wardrobes – Extension units
AP20191LAP20192R
AP40191LAP40192R
AP05191LAP05192R
AP30191LAP30192R
AP06191LAP06192R
AP08191LAP08192R
GP20191LGP20192R
GP40191LGP40192R
GP05191LGP05192R
GP30191LGP30192R
GP06191LGP06192R
GP08191LGP08192R
For each project please remember to leavea 2.0 cm gap to the ceiling and at the sidefor assembly!
List of versions: see pages 174-175
193
MULTI-FORMA II
E Schlafen: MULTI-FORMA II Seite 193 4. 2014 E
Please also note the functional and high-qualitywardrobe interior fittings as well as the special articles and possible special-sized productsin the separate chapters on "Wardrobe interiorfittings" and "Special products".
Please state the versions for the handlesand the wardrobe interior fittings!
F20191LF20192R
366 3660 3661382
F40191LF40192R
366 3660 3661382
F05191LF05192R
367 3670 3671383
F30191LF30192R
366 3660 3661382
F06191LF06192R
367 3670 3671383
F08191LF08192R
367 3670 3671383
2 lamps 2 spotlamps 2 lamps
2 lamps 2 spotlamps 2 lamps
2 lamps 2 spotlamps 2 lamps
Design F pluswith side fillets
Design F
Hinge-door corner wardrobes – Extension units
FP20191LFP20192R
FP40191LFP40192R
FP05191LFP05192R
FP30191LFP30192R
FP06191LFP06192R
FP08191LFP08192R
Surcharge for mirror:Each wardrobe door in Design A, A plus, F and F plus can be fitted with an optional mirror (vertical facet) which is charged extra (mirrorsnot possible for Design G, G plus, L and R).
Surcharge for cornice with integrated
LED spotlamps
(12 V; 1 W)
1 spotlamp per unit
Surcharge for top LED lamp
(12 V; 2.4 W)
1 lamp per unit
Surcharge forpassepartoutA passepartout section cannot be fitted if the
hinge-door corner wardrobe extensionunit is included
as the lastunit
(= end ofwardrobe).
Surcharge for cornice withintegrated light panels
(230 V; 8 W)
1 lamp per unit
Please mark exactly in the front sketch, or state in the order (from the left), whichhinge-doors are to be fitted with a mirror.
Surcharge for mirror per hinge-door:
Height: 229.6; 268.0 and 337.8 cm (Heights with passepartout and/or top LED lamp or cornice incl. lamp: see table page 177)Width: see table (Widths with passepartout: + 1.7 cm each side; with cornice: + 0.5 cm each side)Depth: 61.6 cm (Depths with passepartout and/or top LED lamp or cornice incl. lamp: see table page 177)
229.6 cm
high
268.0 cm
high
337.8 cm
high
670
680
690
aluminium colour chrome gloss
770
780
790
194E Schlafen: MULTI-FORMA II Seite 194 4. 2014E
Accessories for the hinge-door corner wardrobe with fully accessible corner 90°
Fitted corner shelf2.3 cm thick
Fitted corner shelf2.3 cm thickwith clothes rods
Hinge-door corner wardrobes
Type no.
790531L790532R
790521L790522R
List of versions: see pages 174-175
Centre partition
Surcharge for centre partition with integrated swing-out clothes rod
Centre partition 4.7 cm thick; clothes rod with clothes hooks in metal, optionally in aluminium colour or chrome gloss
Please note that the total width of the hinge-/folding-door wardrobes is increased by 2.7 cm when this centre partition is included.
Cannot be used as an outer side section, beside intermediate units with open compartment and intermediate unit 4, with interior TV fittings or beside hinge-doorcorner wardrobes.
Height reductions down to 201 cm without surcharge!
Centre partition
L
L
195
MULTI-FORMA II
E Schlafen: MULTI-FORMA II Seite 195 4. 2014 E
Design versions for intermediate unitsDrawers and doors of the intermediate units are only available in Design A.
Front versions of glass design blind of intermediate unit 4:for lacquer versions: of rear-lacquered glass in the matching lacquer versionfor wood versions: optionally of rear-lacquered glass in pure white, white, wool white, sand or grey. Please state clearly in the order!Not available in high-gloss surface versions!
Intermediate units
Design and front versions for intermediate units
Allocation of handles to intermediate unitsThe MULTI-FORMA II intermediate units 1-4 have lower drawersthat are fitted with standard handles that match the adjacenthandles of the hinge-/folding-doors. Exceptions: if handle 032,033, 034, 035 or 031 is required for the adjacent hinge-/folding-doors, the drawers of the intermediate units 1-4 are fitted withknobs in the same version. The upper doors of the intermediateunits 1-3 are always supplied with knobs in the same version asthe handles of the adjacent hinge-/folding-doors (knobs for handle 031 in matt chrome).
1 2 3 4
If you choose handle 011 for the adjacent hinge-/folding-door wardrobes, the drawers of the intermediate unit auto-matically have the following handle:
matching version
If you choose handle 012 for the adjacent hinge-/folding-door wardrobes, the drawers of the intermediate unit auto-matically have the following handle:
If you choose handle 014/015 for the adjacent hinge-/folding-door wardrobes, the drawers of the intermediate unit automatically have the following handle:
If you choose handle 026/013 for the adjacent hinge-/folding-door wardrobes, the drawers of the intermediate unit automatically have the following handle:
If you choose handle 029/030 for the adjacent hinge-/folding-door wardrobes, the drawers of the intermediate unit automatically have the following handle:
If you choose handle 032/033, 034/035 or 031 for the adja-cent hinge-/folding-door wardrobes, the drawers of the inter-mediate unit automatically have the following handle:
For intermediate units 8 and 9 only the handles 029 and 030 are possible. Please statethe required handle version clearly in the order.
Intermediate units 6 and 7 are always fitted with the same handles as the adjacenthinge-/folding-doors. Exception: Handle 031 is not possible for intermediate unit 6. In thiscase please state the required handle version clearly in the order.
76 8 9
196E Schlafen: MULTI-FORMA II Seite 196 4. 2014E
List of versions: see pages 174-175
Intermediate unit 1 with vertical sliding-door and drawers102.2 cm wide
Intermediate unit 2 with doors and drawers80 cm wide
Interior TV unit fittings are possible, see page 199
Intermediate units
Surcharge for passe-partout
229.6 cm
high
IIIIII
268.0 cm
high
337.8 cm
high
IIIIII
IIIIII
229.6 cm
high
IIIIII
268.0 cm
high
337.8 cm
high
IIIIII
IIIIII
A021 364 3640 3641382
A022 348 3480 3481382
A122 348 3480 3481382
A722 348 3480 3481382
1
2
3 Intermediate unit 3 with doors and drawers100 cm wide
Interior TV unit fittings are possible, see page 199
229.6 cm
high
IIIIII
268.0 cm
high
337.8 cm
high
IIIIII
IIIIII
A023 349 3490 3491382
A123 349 3490 3491382
A723 349 3490 3491382
Top: open compartments, 1 fitted wooden shelf(not adjustable), 1 fitted glass shelf; vertical sliding-door in front version, frame in carcaseversion (sliding-door with standard knobs);inside height: top compartment 63.2 cm; bottomcompartment 63.0 cm; inside width: 95.2 cm;inside depth: 51.5 cm
Bottom: 5 drawers (inside depth: 48.5 cm); see page 195 for handle versions
If a different wood/lacquer version is required forthe lower drawers compared to the top sliding-door, please state so in the order. When versionsfrom different price groups are exchanged, thehigher price group is always charged.
Intermediate unit 1 cannot be fitted directly next tothe hinge-door corner wardrobe with fully accessi-ble corner 90°!
Height: 229.6; 268.0 and 337.8 cm (Heights with passepartout and/or top LED lamp or cornice incl. lamp: see table page 177)Width: see table (Widths with passepartout: + 1.7 cm each side; with cornice: + 0.5 cm each side)Depth: 61.6 cm (Depths with passepartout and/or top LED lamp or cornice incl. lamp: see table page 177)
Surchargefor cornicewith inte-grated LEDspotlamps
(12 V; 1 W)
1 spotlampper unit
Surchargefor top LEDlamp
(12 V; 2.4 W)
1 lamp per unit
Surchargefor cornicewith inte-grated lightpanels
(230 V; 8 W)
1 lamp per unit
Top: 2 doors with 2 fitted wooden shelves (door with standard knob);inside width: 78.0 cm; inside depth: 56.5 cm
Bottom: 5 drawers (inside depth: 48.5 cm); see page 195 for handle versions
If a different wood/lacquer version is required forthe lower drawers compared to the top hinge-doors, please state so in the order. When versionsfrom different price groups are exchanged, thehigher price group is always charged.
Top: 2 doors with 2 fitted wooden shelves (door with standard knob);inside width: 98.0 cm; inside depth: 56.5 cm
Bottom: 5 drawers (inside depth: 48.5 cm); see page 195 for handle versions
If a different wood/lacquer version is required forthe lower drawers compared to the top hinge-doors, please state so in the order. When versionsfrom different price groups are exchanged, thehigher price group is always charged.
Intermediate units are also possible on request as basic and end units or stand-alone units; exception: intermediate unit 1 is only suitable as an intermediate unit(between two wardrobe units). Two intermediate units can also be placed adjacentlyto one another (exception: intermediate unit 1 and 4). Height reductions (done on upper doors; not possible for intermediate unit 1 and 4) are possible down to a total height of 201 cm.Width reductions are generally not possible.Depth reductions are not possible for intermediate unit 1-4, 8 and 9.Drawers and doors of the intermediate units are only available in Design A.Please state the versions for the handles and the wardrobe interior fittings!
Design A
Please state the versions for the handlesand the wardrobe interior fittings!
Surchargefor inte-grated LEDspotlamp
(2x 12 V; 3 W)
2 spotlampsper unit
(in open com-partment)
390
197
MULTI-FORMA II
E Schlafen: MULTI-FORMA II Seite 197 4. 2014 E
Intermediate unit 6 with folding-door incl. integrated cabinet100 cm wide
A0271LA0272R
349 3490 3491382
A1271LA1272R
349 3490 3491382
Intermediate units
Surcharge for passe-partout
229.6 cm
high
IIIIII
268.0 cm
high
337.8 cm
high
IIIIII
IIIIII
A024
6
229.6 cm
high
IIIIII
268.0 cm
high
337.8 cm
high
IIIIII
IIIIII
Surchargefor cornicewith inte-grated LEDspotlamps
(12 V; 1 W)
1 spotlampper unit
Surchargefor top LEDlamp
(12 V; 2.4 W)
1 lamp per unit
Surchargefor cornicewith inte-grated lightpanels
(230 V; 8 W)
1 lamp per unit
Height: 229.6; 268.0 and 337.8 cm (Heights with passepartout and/or top LED lamp or cornice incl. lamp: see table page 177)Width: see table (Widths with passepartout: + 1.7 cm each side; with cornice: + 0.5 cm each side)Depth: 61.6 cm (Depths with passepartout and/or top LED lamp or cornice incl. lamp: see table page 177)
Intermediate units are also possible on request as basic and end units or stand-alone units; exception: intermediate unit 1 is only suitable as an intermediate unit(between two wardrobe units). Two intermediate units can also be placed adjacentlyto one another (exception: intermediate unit 1 and 4). Height reductions (done on upper doors; not possible for intermediate unit 1 and 4) are possible down to a total height of 201 cm.Width reductions are generally not possible.Depth reductions are not possible for intermediate unit 1-4, 8 and 9.Drawers and doors of the intermediate units are only available in Design A.Please state the versions for the handles and the wardrobe interior fittings!
Design A
with 2 fitted wooden shelves and 1 clothes rod;inside width: 98.0 cm: inside depth: 56.5 cm
Folding-door incl. integrated cabinet (accessiblefrom inside, with black textile lining; including anecklace holder; the holder is fixed to the rearwall with Velcro tape; a watch and/or ring holderis possible as a further accessory that is chargedextra (see below);usable inside dims.: 34.4 cm high, 34.4 cm wide,6.0 cm deep)
A fitted shelf can not be included at the sameheight as the cabinet.
See page 195 for handle versions
If drawers and/or pull-out units from the wardrobeinterior fittings are included, these must be lessthan 98 cm wide for constructional reasons becauseof the folding-door (98 cm = inside width of inter-mediate unit).
For each project please remember to leave a 2.0 cmgap to the ceiling and at the side for assembly!
L
L/R = door hinge left/right
Surchargefor inte-grated LEDspotlamp
(2x 12 V; 3 W)
2 spotlampsper unit
(in open com-partment)
390229.6 cm
high
IIIIII
268.0 cm
high
337.8 cm
high
IIIIII
IIIIII
Intermediate unit 7 with rectangular door incl. cabinet100 cm wide
Not available with high-gloss fronts!
7
L
with 2 fitted wooden shelves and 1 clothes rod;inside width: 98.0 cm: inside depth: 56.5 cm
with 1 rectangular door with integrated cabinet(interior surface version in black lacquer, alsoavailable optionally in white lacquer; cabinetaccessible from inside; with 2 fitted glass shelves;usable inside dims.: 52.9 cm high, 33.7 cm wide,10.0 cm deep), frame of cabinet possible in allwood and lacquer versions, please state clearly inthe order; below 1 clothes rod and 3 hooks forbelts, handkerchiefs, etc.; 1 hinge-door
A fitted shelf can not be included at the sameheight as the cabinet.
See page 195 for handle versions
L/R = rectangular door left/right
3620 3621
3620 3621
A0281 LA0282 R
A1281 LA1282 R
382
382
Accessories: Ring holder type 291Watch holder type 292
Intermediate unit 4 with electronic glass design blind incl. remote control and drawers100 cm wide
4
Top: 1 glass design blind with electronic driveand remote control (inside width: 94.5 cm; insidedepth: 35.8 cm); incl. cable aperture in rear wallFront versions of glass design blind:for lacquer versions: of rear-lacquered glass inthe matching lacquer version; for wood versions:optionally rear-lacquered in pure white, white,wool white, sand or grey. Please state clearly inthe order.Interior surface version behind glass design blind in white (also available optionally in black, please state clearly in the order)
Middle: open compartment (usable inside dims.:37.8 cm high, 98.0 cm wide, 56.5 cm deep)
Bottom: 5 drawers (inside depth: 48.5 cm); see page 195 for handle versions
Intermediate unit 4 cannot be fitted directly nextto the hinge-door corner wardrobe 45° or thehinge-door corner wardrobe with fully accessiblecorner 90°!
198E Schlafen: MULTI-FORMA II Seite 198 4. 2014E
List of versions: see pages 174-175
Intermediate unit 9 with cabinet band of BlackMagic glass100 cm wide
229.6 cm
high
IIIIII
268,0 cm
hoch
337.8 cm
high
IIIIII
IIIIII
A071 349 3490 3491382
A171 349 3490 3491382
A771 349 3490 3491382
268.0 cm
high
IIIIII
Intermediate unit 8 with cabinet band of clear glass100 cm wide A070
A170
A770
Intermediate units
Surcharge for passe-partout
8
9
229.6 cm
high
IIIIII
268.0 cm
high
337.8 cm
high
IIIIII
IIIIII
Surchargefor cornicewith inte-grated LEDspotlamps
(12 V; 1 W)
1 spotlampper unit
Surchargefor top LEDlamp
(12 V; 2.4 W)
1 lamp per unit
Surchargefor cornicewith inte-grated lightpanels
(230 V; 8 W)
1 lamp per unit
Height: 229.6; 268.0 and 337.8 cm (Heights with passepartout and/or top LED lamp or cornice incl. lamp: see table page 177)Width: see table (Widths with passepartout: + 1.7 cm each side; with cornice: + 0.5 cm each side)Depth: 61.6 cm (Depths with passepartout and/or top LED lamp or cornice incl. lamp: see table page 177)
with 2 full-length doors; centre area of clearglass, incl. 2 standard inside LED lamps; 12 V, 3 W; incl. footswitch; with 2 fitted wooden shelves above clear glass section; inside width: 95.8 cm, inside depth: 54.5 cm
See page 195 for handle versions
with 2 full-length doors; centre area ofBlackMagic glass, incl. 2 standard inside LEDlamps; 12 V, 3 W; incl. footswitch; with 2 fittedwooden shelves above BlackMagic glass section;inside width: 95.8 cm, inside depth: 54.5 cm
See page 195 for handle versions
Intermediate units are also possible on request as basic and end units or stand-alone units; exception: intermediate unit 1 is only suitable as an intermediate unit(between two wardrobe units). Two intermediate units can also be placed adjacentlyto one another (exception: intermediate unit 1 and 4). Height reductions (done on upper doors; not possible for intermediate unit 1 and 4) are possible down to a total height of 201 cm.Width reductions are generally not possible.Depth reductions are not possible for intermediate unit 1-4, 8 and 9.Drawers and doors of the intermediate units are only available in Design A.Please state the versions for the handles and the wardrobe interior fittings!
Design A
349 3490 3491382
349 3490 3491382
349 3490 3491382
Please state the versions for the handlesand the wardrobe interior fittings!
199
MULTI-FORMA II
E Schlafen: MULTI-FORMA II Seite 199 4. 2014 E
Please observe the space requirements given by the electricaldealer (heat build-up)!
TV compartment including cable aperture in TV panel (usable inside dims.:68.1 cm high, 78.0 (or 98.0) cm wide, 35.5 cm deep; max. load: 60 kg) andwith flat screen support, ideally adaptable; 2 open compartments below forelectronic equipment (usable inside dims. per compartment: 10.0 cm high,35.0 (or 43.0) cm wide, 47.0 cm deep)
The flat screen support can be adjusted 3-dimensionally. It is suitable for81-165 cm (32”-65”) wide flat screens (please observe the usabledims. of the TV compartment; see above); max. load 45 kg.Go to www.vogels.com to check if your flat screen can be fitted on this flatscreen support. Enter the name EFW 6345. After a few steps you can seeif your flat screen TV is compatible with the flat screen support.
Please note:● When interior TV unit fittings are included, the wooden doors of the
intermediate units are fitted with 165° hinges ex-works. ● The 2 fitted wooden shelves, which are fitted standard in the
intermediate unit behind wooden doors, are omitted and the price has already been deducted.
● Because of the 165° hinges on the intermediate unit including the interior TV unit fittings, the door hinges of any 1-door wardrobe unitsincluded which are situated directly next to the intermediate unit must be fitted on the side next to this intermediate unit!
TV compartment including cable aperture in TV panel (usable inside dims.:68.1 cm high, 78.0 (or 98.0) cm wide, 35.5 cm deep; max. load: 60 kg); 2 open compartments below for electronic equipment (usable inside dims.per compartment: 10.0 cm high, 35.0 (or 43.0) cm wide, 47.0 cm deep)
Please note:● When interior TV unit fittings are included, the wooden doors of the
intermediate units are fitted with 165° hinges ex-works. ● The 2 fitted wooden shelves, which are fitted standard in the
intermediate unit behind wooden doors, are omitted and the price has already been deducted.
● Because of the 165° hinges on the intermediate unit including the interior TV unit fittings, the door hinges of any 1-door wardrobe unitsincluded which are situated directly next to the intermediate unit must be fitted on the side next to this intermediate unit!
Surcharge for interior TV unit fitting A
79611for 100 cmwide inter-mediate unit
79601for 80 cmwide inter-mediate unit
Please observe the space requirements given by the electricaldealer (heat build-up)!
Surcharge for interior TV unit fitting B
79612for 100 cmwide inter-mediate unit
79602for 80 cmwide inter-mediate unit
Interior TV unit fittings for intermediate units 2, 3 and 4
Intermediate unitsFor each project please remember to leave a 2.0 cmgap to the ceiling and at the side for assembly!
for fitting on rear wall of intermediate unit behind glass design blind
The flat screen support can be adjusted 3-dimensionally. It is suitable for 81-165 cm (32”-65”) wide flat screens (please observe the usable dims. ofthe TV compartment; see above); max. load 45 kg.
Go to www.vogels.com to check if your flat screen can be fitted on this flatscreen support. Enter the name EFW 6345. After a few steps you can see ifyour flat screen TV is compatible with the flat screen support.
9205
Interior TV unit fittings A for intermediate units 2 and 3
Interior TV unit fittings B for intermediate units 2 and 3
Flat screen support, ideally adaptable, for intermediate unit 4
200E Schlafen: MULTI-FORMA II Seite 200 4. 2014E
The modern, innovative MULTI-FORMA II wardrobe system is suitable for individual arrangements because it is particularly versatile.New front designs give MULTI-FORMA II its particularly exclusive look. As a universal wardrobe system, the design of MULTI-FORMA IIenables you to combine its units with all of the units in the various hülsta Bedroom ranges and almost every type of interior style.
Design idea
Quality features
Concept/planning possibilities
Height reductions at intervals of 1 mm, width and depth
reductions at intervals of 1.0 cmwithout surcharge
(Height and width reductions notpossible for SOLIST).
MULTI-FORMA II Sliding-door wardrobes
You can choose from a variety of design versions for the MULTI-FORMA II sliding-door wardrobes:● Design A ● Design M ● Design G● Design L● SOLISTThe various wood/lacquer versions and high-gloss versions (exclusively for fronts) underline the versatility of the MULTI-FORMA IIwardrobe system.
You can also choose from a variety of versions for the wardrobe interior fittings for the MULTI-FORMA II sliding-door wardrobes:● White lacquer (standard)● Light interior veneer ● Dark interior veneerPlease state exactly in the order, in which version you require the interior fittings for your wardrobe. If no details of the version are given in the order, the interior fittings are delivered in the standard white lacquer version.
● Doors in Design A and M with optional mirror ● Optional: - with top LED lamp (12 V; 2.4 W)
- with cornice and integrated LED spotlamps (12 V, 1 W)- with cornice and integrated light panels (230 V, 8 W)The lights are operated by a standard external footswitch.
● Wardrobe inside widths: 78, 88, 98, 108, 118, 133, 148 cm● The wardrobe outer widths are calculated by adding 2 cm to the inside widths for each partition and side section; another 1.0 cm
must be added for the side protrusion when a cornice is fitted● Two different basic wardrobe heights: 229.6 cm and 268.0 cm● MULTI-FORMA II is variable: height reductions at intervals of 1 mm, width and depth reductions at intervals of 1.0 cm without
surcharge (height and width reductions not possible for SOLIST).● Wardrobe outside depth (incl. profiled handle): 67.6 cm● Wardrobe inside depth: 56.0 cm● Functional and high-quality wardrobe interior fittings (see separate "Wardrobe interior fittings" chapter) ● Standard interior fittings per unit: 2 fitted shelves, 1 clothes rod
● All wardrobe doors with cushioning mechanism and brush seals● Innovative door guiderail bracket● Unobtrusive 2.5 mm size holes● Low plinth with trapezoid-shaped brackets for simple assembly● All partitions and side sections have a special plinth adjustment device which makes exact horizontal and vertical assembly
much easier● hülsta-SoftGlide: Doors of sliding-door wardrobes with air-cushioned auto pull-in feature
201
MULTI-FORMA II
E Schlafen: MULTI-FORMA II Seite 201 4. 2014 E
Wardrobe examples for sliding-door wardrobes; lamps
● Mirror fronts for doors in Design A and M at a surcharge● Cornice and lamps at a surcharge● Top LED lamps at a surcharge● 2 different basic heights: 229.6; 268.0 cm● Wardrobe outside widths: 162, 182, 202, 222, 242, 272, 302, 322, 342, 362, 382, 402 cm● Unit inside widths: 78, 88, 98, 108, 118, 133, 148 cm● Outside depth: 67.6 cm● Inside depth: 56.0 cm
For calculating the total width when fitting a cornice with lamp, please note the protrusion of 0.5 cm left and right!
Sliding-door wardrobe in 229.6 cm height
Sliding-door wardrobe in 268.0 cm height
Lamps
Remote control unitSurcharge for remote control unit (transmitter + receiver) type 379 = Surcharge for extra transmitter type 3791 = Surcharge for extra receiver type 3792 =
4-channel remote control unit is also possible(see chapter "Switch options for lamps")!
Cornice with integrated LED spotlampsSurcharge for each additional spotlamp type 369 = Price reduction for one spotlamp type 368 = (if not required in cornice)
Cornice with integrated light panelsSurcharge for each additional light panel type 3681 = Price reduction for one light panel type 3680 = (if not required in cornice)
Top LED lampSurcharge for each additional lamp type 3691 =
All sliding-door wardrobes are available with an optional cornice and LED lamps or witha top LED lamp. Either one integrated LED spotlamp (12 V, 1 W), one light panel (230 V,8 W) or one top LED lamp (12 V, 2.4 W) is fitted standard above each unit. Exception: inthe case of the SOLIST, the cornice has no integrated LED spotlamp or light panel abovethe middle door.It is also possible to remove individual spotlamps or light panels with a price reduction.Please include a sketch in all cases.Switching is done standard by an external footswitch. A remote control unit is also avail-able as an alternative, which is charged extra. The remote control unit incorporates atransmitter, with which the entire cornice lighting can be switched on and off. Extratransmitters are available at a surcharge. The footswitch is omitted when the remotecontrol unit is employed.
Sliding-door wardrobes
Height reductions at intervals of 1 mm, width and depth reductions at intervals of 1.0 cm without surcharge; when reducing the height of doors in Design L only the top and bottom door panels are reduced in height (the middle panels always retain their original height); height and width reductions not possible for SOLIST.
see pages 204-211Widths
Depths (incl. profiled handle)
Heights
with cornice incl. lamp
see sizes without cornice + 4.8 cm
71.3 cm
with top LED lamp
see sizes without cornice + 5.0 cm
72.0 cm
without cornice
67.6 cm
229.6 and 268.0 cm
Dims.
202E Schlafen: MULTI-FORMA II Seite 202 4. 2014E
Lists of versions for sliding-door wardrobes
Design versions for wardrobe doors Design A Design M Design G Design L SOLIST
White lacquer (standard)Light interior veneer Dark interior veneer
Version
973974975
Model no.
Versionswardrobe interior fittingsWith the MULTI-FORMA II sliding-door wardrobes you canchoose between three versions for the wardrobe interior fit-tings. The desired version must be stated in the order. If nodetails are given in the order, the wardrobe interior fittings aresupplied in white lacquer.
MULTI-FORMA II sliding-door wardrobes can only be supplied with profiled handles in different optional lacquer versions (exception: sliding-door wardrobes in Design M and sliding-doors in a wooden version always with standard aluminium-coloured handles). Please be sure to state the required version in the order!
Profiled handle versions
With the MULTI-FORMA II sliding-door wardrobes you can choose the carcase and the front in a different version.Please state this clearly in the order. When versions from different price groups are exchanged, the higher pricegroup is always charged.
Lacquer
High-gloss
Veneer
Wood/lacquer/high-gloss versions – Design A
Model no. Carcase/front Price group
White lacquerWool white lacquerSand lacquerGrey lacquer
High-gloss pure white*High-gloss white*High-gloss sand*High-gloss grey*
Structured beechNatural oakLight brown ashCore walnutCherrywood gold
IIII
IIIIIIII
IIIIIIIIII
White lacquerWool white lacquerSand lacquerGrey lacquer
Pure white lacquer*White lacquer*Sand lacquer*Grey lacquer*
Aluminium colourAluminium colourAluminium colourAluminium colourAluminium colour
* The carcase and the profiled handle for high-gloss fronts are in matt lacquer in the matching colour.
Profiled handle
Lacquer
High-gloss
Veneer
Wood/lacquer/high-gloss versions – Design M
Model no. Carcase/front Price group
White lacquerWool white lacquerSand lacquerGrey lacquer
High-gloss pure white*High-gloss white*High-gloss sand*High-gloss grey*
Structured beechNatural oakLight brown ashCore walnut
IIII
IIIIIIII
IIIIIII
Aluminium colour
* The carcase for high-gloss fronts is in matt lacquer in the matching colour.
Profiled handle
S01S63S02S03
S05S06S07S64
S09S65S11S12S13
S14S66S15S16
S18S19S20S67
S22S68S24S25
203
MULTI-FORMA II
E Schlafen: MULTI-FORMA II Seite 203 4. 2014 E
Lacquer
Veneer
Lacquer
High-gloss
Veneer
Wood/lacquer/high-gloss versions – Design G
Model no. Carcase/front Price group
White lacquerWool white lacquerSand lacquerGrey lacquer
High-gloss pure white*High-gloss white*High-gloss sand*High-gloss grey*
Structured beechNatural oakLight brown ashCore walnutCherrywood gold
White lacquerWool white lacquerSand lacquerGrey lacquer
Structured beechNatural oakLight brown ashCore walnutCherrywood gold
ApplicationModel no.
White lacquerWool white lacquerSand lacquerGrey lacquer
Pure white lacquer*White lacquer*Sand lacquer*Grey lacquer*
Aluminium colourAluminium colourAluminium colourAluminium colourAluminium colour
* The carcase and the profiled handle for high-gloss fronts are in matt lacquer in the matching colour.
Profiled handle
IIII
IIIIIIII
IIIIIIIIII
VeneerHigh-gloss
Wood/lacquer/high-gloss versions – Design L
Model no. Carcase*/front Price group
High-gloss pure white*High-gloss white*High-gloss sand*High-gloss grey*
Pure white lacquerWhite lacquerSand lacquerGrey lacquer
Structured beech**Natural oak**Light brown ash**Core walnut**Cherrywood gold**
ApplicationModel no.
Pure white lacquer*White lacquer*Sand lacquer*Grey lacquer*
* The carcase and the profiled handle for high-gloss fronts are in matt lacquer in the matching colour.
The carcase is available in all the different versions (see e.g. Design G). Please state clearly in theorder! If the carcase is required in Cherrywood gold, price group III is charged.
Profiled handle
IIIIIIII
Lacquer
Lacquer
High-gloss
Veneer
Wood/lacquer/high-gloss versions – SOLIST
Model no. Carcase/front Price group
White lacquerWool white lacquerSand lacquerGrey lacquer
High-gloss pure white*High-gloss white*High-gloss sand*High-gloss grey*
Light brown ashCore walnut
Light brown ashCore walnut
ApplicationModel no.
White lacquerWool white lacquerSand lacquerGrey lacquer
Pure white lacquer*White lacquer*Sand lacquer*Grey lacquer*
Aluminium colourAluminium colour
* The carcase and the profiled handle for high-gloss fronts are in matt lacquer in the matching colour.
Profiled handle
IIII
IIIIIIII
IIII
Veneer
** If the application is required in a wooden version, the side handles are always suppliedin the same colour as the fronts.
With the MULTI-FORMA II sliding-door wardrobes you can choose the carcase and the front in a different version. Please state this clearly in the order. When versions from different price groups are exchanged, the higher price group is always charged.
Changing versions
S26S69S27S28
S30S31S32S70
S48S71S50S51S52
S26S69S27S28
S48S71S50S51S52
S34S35S36S72
S62S53S54S55
S57S73S59S60S61
S38S74S39S40
S42S43S44S75
S46S47
S46S47
204E Schlafen: MULTI-FORMA II Seite 204 4. 2014E
268.0 cm
high
IIIIII
229.6 cm
high
IIIIII
A52162
268.0 cm
high
IIIIII
229.6 cm
high
IIIIII
268.0 cm
high
IIIIII
229.6 cm
high
IIIIII
268.0 cm
high
IIIIII
229.6 cm
high
IIIIII
Sliding-door wardrobesFor each project please remember to leave a 10.0 cm gap betweenwardrobe carcase and the ceiling and 2.0 cm at the side for assembly!
Design A Design M
A62162
A52182
A62182
A52202
A62202
A52222
A62222
List of versions: see pages 202-203
Height: 229.6 and 268.0 cm (Heights with top LED lamp or cornice incl. lamp: see table page 201)Width: see table (Widths with cornice: + 0.5 cm each side)Depth: 67.6 cm (Depths with top LED lamp or cornice incl. lamp: see table page 201)Inside depth: 56.0 cm
Interior fittings per unit: 2 fitted shelves, 1 clothes rod
Height reductions at intervals of 1 mm, width and depth reductions atintervals of 1.0 cm without surcharge.When reducing the height of doors in Design L only the top and bottomdoor panels are reduced in height (the middle panels always retain theiroriginal height). Height and width reductions are not possible on theSOLIST.
Cornice is full-length up to 302 cm width.Not available with passepartout unit!
G52162
Design G
G62162
G52182
G62182
G52202
G62202
G52222
G62222
With SOLIST thecornice has nointegrated LEDspotlamp abovethe middle door.
With SOLIST thecornice has nointegrated lightpanel above themiddle door.
205
MULTI-FORMA II
E Schlafen: MULTI-FORMA II Seite 205 4. 2014 E
Please also note the functional andhigh-quality wardrobe interiorfittings as well as the special articles and possible special-sized products in the separatechapters on "Wardrobe interior fittings" and "Special products".
3110 31110383
Sliding-door wardrobes
L52162
–
SOLISTDesign L
3110 31110383L62162
–
3120 31210383L52182
–
3120 31210383L62182
–
3130 31310383L52202
–
3130 31310383L62202
–
3140 31410383L52222
–
3140 31410383L62222
–
Height: 229.6 and 268.0 cm (Heights with top LED lamp or cornice incl. lamp: see table page 201)Width: see table (Widths with cornice: + 0.5 cm each side)Depth: 67.6 cm (Depths with top LED lamp or cornice incl. lamp: see table page 201)Inside depth: 56.0 cm
Surcharge for cornice withintegrated LED spotlamps
(12 V; 1 W)
1 spotlamp per unit
Surcharge for cornice withintegrated light panels
(230 V; 8 W)
1 lamp per unit
Surcharge fortop LED lamp
(12 V; 2.4 W)
1 lamp per unit
for Design A,M, G and L
for SOLIST for Design A,M, G and L
for SOLIST
Please markexactly in the front sketch, or state in the order (from theleft), which sliding-doorsare to be fitted with a mirror.
Surcharge for mirror per sliding-door:
Surcharge for mirror:Each wardrobe door in Design A oreach sliding-door panel in Design Mcan be fitted with an optional mirrorwhich is charged extra (mirrors notpossible for Design G, L and SOLIST).
for Design A for Design M
Please markexactly in thefront sketch, or state in theorder (from theleft), which sliding-doorpanels are tobe fitted with a mirror.
Surcharge for mirror persliding-doorpanel:
206E Schlafen: MULTI-FORMA II Seite 206 4. 2014E
268.0 cm
high
IIIIII
229.6 cm
high
IIIIII
M52242
–
268.0 cm
high
IIIIII
229.6 cm
high
IIIIII
268.0 cm
high
IIIIII
229.6 cm
high
IIIIII
268.0 cm
high
IIIIII
229.6 cm
high
IIIIII
Sliding-door wardrobes
Design A Design M
A53242
A63242
M52272
–
A53272
A63272
List of versions: see pages 202-203
Height: 229.6 and 268.0 cm (Heights with top LED lamp or cornice incl. lamp: see table page 201)Width: see table (Widths with cornice: + 0.5 cm each side)Depth: 67.6 cm (Depths with top LED lamp or cornice incl. lamp: see table page 201)Inside depth: 56.0 cm
Design G
G53242
G63242
G53272
G63272
For each project please remember to leave a 10.0 cm gap betweenwardrobe carcase and the ceiling and 2.0 cm at the side for assembly!
Interior fittings per unit: 2 fitted shelves, 1 clothes rod
Height reductions at intervals of 1 mm, width and depth reductions atintervals of 1.0 cm without surcharge.When reducing the height of doors in Design L only the top and bottomdoor panels are reduced in height (the middle panels always retain theiroriginal height). Height and width reductions are not possible on theSOLIST.
Cornice is full-length up to 302 cm width.Not available with passepartout unit!
With SOLIST thecornice has nointegrated LEDspotlamp abovethe middle door.
With SOLIST thecornice has nointegrated lightpanel above themiddle door.
Surcharge for cornice withintegrated LED spotlamps
(12 V; 1 W)
1 spotlamp per unit
Surcharge for cornice withintegrated light panels
(230 V; 8 W)
1 lamp per unit
Surcharge fortop LED lamp
(12 V; 2.4 W)
1 lamp per unit
for Design A,M, G and L
for SOLIST for Design A,M, G and L
for SOLIST
207
MULTI-FORMA II
E Schlafen: MULTI-FORMA II Seite 207 4. 2014 E
Please also note the functional andhigh-quality wardrobe interiorfittings as well as the special articles and possible special-sized products in the separatechapters on "Wardrobe interior fittings" and "Special products".
3150 31510383
Sliding-door wardrobes
SOLISTDesign L
S53242
–
3160 31610384L53242
–
S63242
–
3160 31610384L63242
–
3170 31710383
S53272
–
3180 31810384L53272
–
S63272
–
3180 31810384L63272
–
Height: 229.6 and 268.0 cm (Heights with top LED lamp or cornice incl. lamp: see table page 201)Width: see table (Widths with cornice: + 0.5 cm each side)Depth: 67.6 cm (Depths with top LED lamp or cornice incl. lamp: see table page 201)Inside depth: 56.0 cm
S3160
S3160
S3180
S3180
S3161
S3161
S3181
S3181
Please markexactly in the front sketch, or state in the order (from theleft), which sliding-doorsare to be fitted with a mirror.
Surcharge for mirror per sliding-door:
Surcharge for mirror:Each wardrobe door in Design A oreach sliding-door panel in Design Mcan be fitted with an optional mirrorwhich is charged extra (mirrors notpossible for Design G, L and SOLIST).
for Design A for Design M
Please markexactly in thefront sketch, or state in theorder (from theleft), which sliding-doorpanels are tobe fitted with a mirror.
Surcharge for mirror persliding-doorpanel:
208E Schlafen: MULTI-FORMA II Seite 208 4. 2014E
268.0 cm
high
IIIIII
229.6 cm
high
IIIIII
M52302
–
268.0 cm
high
IIIIII
229.6 cm
high
IIIIII
268.0 cm
high
IIIIII
229.6 cm
high
IIIIII
268.0 cm
high
IIIIII
229.6 cm
high
IIIIII
Sliding-door wardrobes
Design A Design M
A53302
A63302
A54322
A64322
A53332
A63332
List of versions: see pages 202-203
Height: 229.6 and 268.0 cm (Heights with top LED lamp or cornice incl. lamp: see table page 201)Width: see table (Widths with cornice: + 0.5 cm each side)Depth: 67.6 cm (Depths with top LED lamp or cornice incl. lamp: see table page 201)Inside depth: 56.0 cm
Design G
G53302
G63302
G54322
G64322
G53332
G63332
For each project please remember to leave a 10.0 cm gap betweenwardrobe carcase and the ceiling and 2.0 cm at the side for assembly!
Interior fittings per unit: 2 fitted shelves, 1 clothes rod
Height reductions at intervals of 1 mm, width and depth reductions atintervals of 1.0 cm without surcharge.When reducing the height of doors in Design L only the top and bottomdoor panels are reduced in height (the middle panels always retain theiroriginal height). Height and width reductions are not possible on theSOLIST.
Cornice is full-length up to 302 cm width.Not available with passepartout unit!
With SOLIST thecornice has nointegrated LEDspotlamp abovethe middle door.
With SOLIST thecornice has nointegrated lightpanel above themiddle door.
Surcharge for cornice withintegrated LED spotlamps
(12 V; 1 W)
1 spotlamp per unit
Surcharge for cornice withintegrated light panels
(230 V; 8 W)
1 lamp per unit
Surcharge fortop LED lamp
(12 V; 2.4 W)
1 lamp per unit
for Design A,M, G and L
for SOLIST for Design A,M, G and L
for SOLIST
Please also note the functional andhigh-quality wardrobe interiorfittings as well as the special articles and possible special-sized products in the separatechapters on "Wardrobe interior fittings" and "Special products".
209
MULTI-FORMA II
E Schlafen: MULTI-FORMA II Seite 209 4. 2014 E
3190 31910383
Sliding-door wardrobes
SOLISTDesign L
S53302
–
3200 32010384L53302
–
S63302
–
3200 32010384L63302
–
3210 32110385L54322
–
3210 32110385L64322
–
S53332
–
3220 32210384L53332
–
S63332
–
3220 32210384L63332
–
Height: 229.6 and 268.0 cm (Heights with top LED lamp or cornice incl. lamp: see table page 201)Width: see table (Widths with cornice: + 0.5 cm each side)Depth: 67.6 cm (Depths with top LED lamp or cornice incl. lamp: see table page 201)Inside depth: 56.0 cm
S3200
S3200
S3220
S3220
S3201
S3201
S3221
S3221
Please markexactly in the front sketch, or state in the order (from theleft), which sliding-doorsare to be fitted with a mirror.
Surcharge for mirror per sliding-door:
Surcharge for mirror:Each wardrobe door in Design A oreach sliding-door panel in Design Mcan be fitted with an optional mirrorwhich is charged extra (mirrors notpossible for Design G, L and SOLIST).
for Design A for Design M
Please markexactly in thefront sketch, or state in theorder (from theleft), which sliding-doorpanels are tobe fitted with a mirror.
Surcharge for mirror persliding-doorpanel:
210E Schlafen: MULTI-FORMA II Seite 210 4. 2014E
268.0 cm
high
IIIIII
229.6 cm
high
IIIIII
A54402 G54402
A64402 G64402
268.0 cm
high
IIIIII
229.6 cm
high
IIIIII
A54382 G54382
A64382 G64382
268.0 cm
high
IIIIII
229.6 cm
high
IIIIII
268.0 cm
high
IIIIII
229.6 cm
high
IIIIII
G54342
G64342
G54362
G64362
A54342
A64342
A54362
A64362
Sliding-door wardrobes
Design A Design GDesign M
List of versions: see pages 202-203
Height: 229.6 and 268.0 cm (Heights with top LED lamp or cornice incl. lamp: see table page 201)Width: see table (Widths with cornice: + 0.5 cm each side)Depth: 67.6 cm (Depths with top LED lamp or cornice incl. lamp: see table page 201)Inside depth: 56.0 cm
For each project please remember to leave a 10.0 cm gap betweenwardrobe carcase and the ceiling and 2.0 cm at the side for assembly!
Interior fittings per unit: 2 fitted shelves, 1 clothes rod
Height reductions at intervals of 1 mm, width and depth reductions atintervals of 1.0 cm without surcharge.When reducing the height of doors in Design L only the top and bottomdoor panels are reduced in height (the middle panels always retain theiroriginal height). Height and width reductions are not possible on theSOLIST.
Cornice is full-length up to 302 cm width.Not available with passepartout unit!
With SOLIST thecornice has nointegrated LEDspotlamp abovethe middle door.
With SOLIST thecornice has nointegrated lightpanel above themiddle door.
Surcharge for cornice withintegrated LED spotlamps
(12 V; 1 W)
1 spotlamp per unit
Surcharge for cornice withintegrated light panels
(230 V; 8 W)
1 lamp per unit
Surcharge fortop LED lamp
(12 V; 2.4 W)
1 lamp per unit
for Design A,M, G and L
for SOLIST for Design A,M, G and L
for SOLIST
Please also note the functional andhigh-quality wardrobe interiorfittings as well as the special articles and possible special-sized products in the separatechapters on "Wardrobe interior fittings" and "Special products".
211
MULTI-FORMA II
E Schlafen: MULTI-FORMA II Seite 211 4. 2014 E
3300 33010385L54402
–
3300 33010385L64402
–
3280 32810385L54382
–
3280 32810385L64382
–
3240 32410385L54342
–
3240 32410385L64342
–
3250 32510385L54362
–
3250 32510385L64362
–
Sliding-door wardrobes
SOLISTDesign L
Height: 229.6 and 268.0 cm (Heights with top LED lamp or cornice incl. lamp: see table page 201)Width: see table (Widths with cornice: + 0.5 cm each side)Depth: 67.6 cm (Depths with top LED lamp or cornice incl. lamp: see table page 201)Inside depth: 56.0 cm
Please markexactly in the front sketch, or state in the order (from theleft), which sliding-doorsare to be fitted with a mirror.
Surcharge for mirror per sliding-door:
Surcharge for mirror:Each wardrobe door in Design A oreach sliding-door panel in Design Mcan be fitted with an optional mirrorwhich is charged extra (mirrors notpossible for Design G, L and SOLIST).
for Design A for Design M
Please markexactly in thefront sketch, or state in theorder (from theleft), which sliding-doorpanels are tobe fitted with a mirror.
Surcharge for mirror persliding-doorpanel:
212E Schlafen: MULTI-FORMA II Seite 212 4. 2014E
Electrical opening system for sliding-door wardrobes
Electrical opening system for 2-door sliding-door wardrobes
Electrical opening system for 3-door sliding-door wardrobes
Electrical opening system for 4-door sliding-door wardrobes
3010
3020
3030
Possible arrangements
Electrical opening system for sliding-door wardrobesThe sliding-door wardrobes can also be fitted with an optional electrical opening system.The sliding-door then opens or closes automatically when pushed slightly.Open sliding-doors will close automatically after approx. 2 minutes.
Special sizes for sliding-door wardrobes with electrical opening system:Height reductions are possible down to max. 180 cm height.For reasons of appearance, we also do not recommend the wardrobe being reduced below eye-level height.Width reductions are generally not possible.Depth reductions are possible down to max. 20 cm wardrobe depth.
The electrical opening system is not possible when a reversed sliding-door wardrobe is required.The centre sliding-door can only be opened to the left in the case of 3-door sliding-door wardrobes with electrical opening system.
List of versions: see pages 202-203
213
MULTI-FORMA II
E Schlafen: MULTI-FORMA II Seite 213 4. 2014 E
To enhance the competency of the range, MULTI-FORMA II now also includes a walk-in room system which incorporates all the key performance features (planning, surface versions,special sizes, etc.) of the previous carcase system. Furthermore, this room/niche system also provides a separate system of fronts. In this way, small niche combinations and evenmagnanimous room systems can be created individually.The tried and tested planning system from MULTI-FORMA II involving basic and extension units has been incorporated in the room/niche system. This guarantees a simple and com-fortable initiation to the range including easy planning. As a universal wardrobe system, the design of MULTI-FORMA II enables you to combine its units with all of the units in thevarious hülsta Bedroom ranges and almost every type of interior style.
Design idea The MULTI-FORMA II room and niche system is only available with sliding-doors in Design A in different optional wood/lacquer andhigh-gloss versions. The sliding-doors are fitted with a shell handle, optionally in matt or high-gloss chrome.
You can also choose from a variety of versions for the wardrobe fittings for the MULTI-FORMA II room and niche system:● White lacquer (standard)● Light interior veneer ● Dark interior veneerPlease state exactly in the order, in which version you require the fittings for your wardrobe. If no details of the version aregiven in the order, the fittings are delivered in the standard white lacquer version.
● Open carcase units that can all be combined at will● Carcase inside widths: 38, 48, 78, 98, 158, 198 cm● Carcase height: up to max. 268.0 cm● Total depth: 59.0 cm● Inside depth: 56.0 cm● MULTI-FORMA II is variable: height reductions at intervals of 1 mm, width and depth reductions at intervals of 1.0 cm without
surcharge● Partitions and side sections with optional LED lamps; standard operation by remote control unit● Corner carcase units (45° and with fully accessible corner 90°)
● Hidden aluminium construction manufactured from extremely solid hexagonal material● Sliding-doors with cushioning device on one or both sides, incl. aluminium top and bottom guide rails ● All sliding-doors with cushioning bracket and brush seals● Innovative door guiderail bracket ● Unobtrusive 2.5 mm size holes● Low plinth with trapezoid-shaped brackets for simple assembly● All partitions and side sections have a special plinth adjustment device which makes exact horizontal and vertical assembly
much easier● Functional and high-quality wardrobe interior fittings (see separate "Wardrobe interior fittings" chapter) ● Standard fittings: 2 fitted shelves, 1 clothes rod
Quality features
Concept/planning possibilities
MULTI-FORMA II Room and niche system
214E Schlafen: MULTI-FORMA II Seite 214 4. 2014E
Lists of versions room and niche system
Design version for sliding-doorsDesign A
White lacquer (standard)Light interior veneer Dark interior veneer
Version
973974975
Model no.
Versionswardrobe fittings With the MULTI-FORMA II room and niche system you canchoose between three versions for the wardrobe fittings. Thedesired version must be stated in the order. If no details aregiven in the order, the wardrobe fittings are supplied in whitelacquer.
Wood/lacquer/high-gloss versions – Design A
Model no. Front* Price group
White lacquerWool white lacquerSand lacquerGrey lacquer
High-gloss pure whiteHigh-gloss whiteHigh-gloss sandHigh-gloss grey
Structured beechNatural oakLight brown ashCore walnutCherrywood gold
IIII
IIIIIIII
IIIIIIIIII
Shell handle
037 Matt chrome(standard handle)038 Glossy chrome
* Sliding-doors are surrounded by aluminium profiles at the sides.
The MULTI-FORMA II room and niche system can only be supplied with integrated shell handles,optionally in glossy or matt chrome. Please be sure to state the required version in the order! If noversion is stated in the order, shell handle 037 (matt chrome) is supplied ex-works.
Versions of shell handle
Model no. Carcase
973
974975
White lacquer (standard)Light interior veneer Dark interior veneer
Design A
Lacquer
High-gloss
Veneer
R01R14R02R03
R05R06R07R15
R09R16R11R12R13
215
MULTI-FORMA II
E Schlafen: MULTI-FORMA II Seite 215 4. 2014 E
Room and niche system - Room situations
Room situations - Examples of use/floorplansWith the MULTI-FORMA II room and niche system it is possible to fit out the units individually according to their particular use in the home. Different room arrangements, forexample for niches or sloping ceilings, can be designed practically. Rooms can even be divided or a walk-in wardrobe can be created: the possible uses of the MULTI-FORMA IIroom and niche system are almost unlimited!
Niche Walk-in wardrobe Room divider
216E Schlafen: MULTI-FORMA II Seite 216 4. 2014E
Walls absolutely vertical= everything O.K.
Example 7Walls are not vertical = wall fitting profiles must be ordered
Example 8
O.K. Not O.K.:Wall fitting profiles must be ordered (see page 223)
Floor absolutely horizontal= everything O.K.
Example 1Floor (with absolutely horizontal ceiling) hasmax. 8 mm height difference per metre length= everything O.K.
Example 2Floor has more than 8 mm height difference per metre length= this difference must be equalised effectively on-site. If both the floorand ceiling betray differences in height, the sum of these height differencesper metre length must not exceed 8 mm.
Example 3
Ceiling (with absolutely horizontal floor) has max. 8 mm height difference per metre length = everything O.K.
Ceiling has more than 8 mm height difference per metre length= a ceiling fitting profile must be ordered. If both the floor and ceilingbetray differences in height, the sum of these height differences permetre length must not exceed 8 mm.
Example 6
O.K. O.K. Not O.K.:Difference must be balanced effectively on-site
O.K. O.K. Not O.K.:A ceiling fitting profile must be ordered (see page 223)
If the on-site situation has been clarified (also see the following page), the required dimensions must be calculated.The situation/view is the key here.
right-angledView 1
with 1 or 2 slopesView 2
1.) Floor
2.) Ceiling
3.) Walls
Ceiling absolutely horizontal= everything O.K.
Example 4 Example 5
Technical notes on room and niche system
217
MULTI-FORMA II
E Schlafen: MULTI-FORMA II Seite 217 4. 2014 E
3.) Walls
The walls must be checked to see if they are vertical using a spirit level. The walls must be absolutely vertical (see example 7). If they are not, wall fitting profiles must be ordered(against a surcharge; see example 8 and page 223). Width of wall fitting profile: 50 mm. It can be adjusted by 25 mm (i.e. max. 75 mm wide).
Slight irregularities in the walls, warping, etc. must be equalised during assembly (e.g. with acrylic material).
The on-site situation must be checked before you can calculate the individual sizes of the furniture units.
1.) Floor
The floor must be checked to see if it is horizontal using a spirit level. An absolutely horizontalfloor (see example 1) is best. The MULTI-FORMA II room and niche system, however, will permitheight differences in the floor of a maximum 8 mm per 1 m length (i.e. 16 mm for a max. widthof 2 m, 24 mm for a max. width of 3 m, etc.; see example 2). The various maximum tolerancescannot be added up.
If the maximum tolerance value of 8 mm per 1 m length is exceeded (see example 3), this difference must be equalised suitably on-site.
Please be sure to state in your order what the floor material is. On solid floors (e.g. on tiles, parquet flooring, laminate) the floor rail with the runner bracket is fitted directly on to the floor.In the case of soft floors, like for example carpets, these must be cut out on-site and the floorrails must then be laid. The floor rail with the running bracket is always supplied in oversize andhas to be cut to requirements on site.
2.) Ceiling
The ceiling must be checked to see if it is horizontal using a spirit level. An absolutely horizon-tal ceiling (see example 4) is best. The MULTI-FORMA II room and niche system, however, willpermit height differences in the ceiling of a maximum 8 mm per 1 m length (i.e. 16 mm for amax. width of 2 m, 24 mm for a max. width of 3 m, etc.; see example 5). The various maximumtolerances cannot be added up.
If the maximum tolerance value of 8 mm per 1 m length is exceeded, a ceiling fitting profile mustbe ordered (against a surcharge; see example 6 and page 223). Height of ceiling fitting profile: 50 mm. It can be adjusted by 25 mm (i.e. max. 75 mm high). When using the fitting profile, please state the true ceiling height. Slight irregularities in the ceiling surface, warping, etc. must be equalised during assembly (e.g. with acrylic material).
The fitting profile is mounted on the ceiling. It is always supplied in oversize and has to be cutto requirements on site.
Height 1 Height 2 Height 3 Please measure height 1 and height 3 in each corner
Width 1
Width 2
Width 3
Measuring heights Measuring widths
Height 1Height 2
Height 3
Width 1
Width 2
Width 3
Length 1
Measuring sloping ceilings
Please state all measurements in millimetres. Warm corners must be straightened on-site before measuring. Please always check all walls for quality and to see if they are exactly straight.
max. 8 mmon 1 m
max. 16 mm on 2 m
max. 24 mm on 3 m
max. 32 mm on 4 m
Maximum tolerances
Important notes: Generally speaking, you as a dealer/qualified fitter are responsible for the correct wall mounting of the units. That is why wall mounting should only be carried out by properly trained andqualified fitters. hülsta supplies materials for mounting units on walls for nearly all the units and which should be used for safety and for constructional reasons. The assembly materials supplied by hülsta (plugs, screws)are only suitable for fitting components on to concrete in firmness class (C12/15).For other materials (please see separate materials table in the wall composition chapter) we provide you with an assembly mortar set as an extra order. Please note that this assembly mortar set is also onlysuitable for the materials listed in the materials table.If walls are made up of other materials (e.g. plastered or lighter wall materials), one should use another method of mounting better suited to the load on site.Please note that if the units are not mounted properly on the wall, there is a risk of the units falling down or tipping over – especially when alternative mounting materials acquired on site have been used.For the reasons stated above it is absolutely essential to enquire about the composition of any walls before signing any contracts.
218E Schlafen: MULTI-FORMA II Seite 218 4. 2014E
List of versions: see page 214Room and niche system
Open carcase basic unitswith 2 outer side-sections (each 2 cm thick)
Interior fittings per unit:2 fitted shelves, 1 clothes rod
Open carcase units optionally in white lacquer(standard), light interior veneer or dark interiorveneer. Please state clearly in the order!
For each wardrobe combination, the first element on theleft is considered to be the basic unit, incorporating bothouter side-sections. One can only include one basic unitin each combination. When adding on extension units,the right-hand side-section of the basic unit is employedas the end side-section of the complete combination.
Open carcase unit,42 cm wide
Open carcase unit,52 cm wide
Open carcase unit,82 cm wide
Open carcase unit,102 cm wide
Open carcase unit,162 cm wide
Open carcase unit,202 cm wide
max. 268.0 cm high
204
max. 268.0 cm high
max. 268.0 cm high
max. 268.0 cm high
max. 268.0 cm high
max. 268.0 cm high
205
208
Height: max. 268.0 cm Height reductions at intervals of 1 mm, width and depth reductions at intervals of 1.0 cm without surcharge.Width: see tableTotal depth: 59.0 cmInside depth: 56.0 cm
210
216
220
2219
Open carcase unit with fully accessible corner 90°,112.7 x 112.7 cm wide
26191 L26192 R
max. 268.0 cm high
max. 268.0 cm high
Left-hand type (L): left 2 fitted shelves and 1 clothes rod,each 106.7 cm wide; right 2 fitted shelves and 1 clothesrod, each 52.5 cm wide Right-hand type (R): interior fittings in reverse order
For production we require the details of series of assembly from left to right.
Interior fittings:1 fitted shelf without clothes rod 1 fitted shelf with clothes rod For production we require the details of series of assemblyfrom left to right.
Open corner carcase unit 45°,97.3 x 97.3 cm wide
L
For each project please remember to leave a 2.0 cmgap to the ceiling and at the side for assembly!
Please also note the functional andhigh-quality wardrobe interiorfittings as well as the special articles and possible special-sized products in the separatechapters on "Wardrobe interior fittings" and "Special products".
219
MULTI-FORMA II
E Schlafen: MULTI-FORMA II Seite 219 4. 2014 E
Open carcase extension unitswith 1 centre partition (2 cm thick)
Interior fittings per unit:2 fitted shelves, 1 clothes rod
Open carcase units optionally in white lacquer(standard), light interior veneer or dark interiorveneer. Please state clearly in the order!
Room and niche system
Open carcase unit,40 cm wide
Open carcase unit,50 cm wide
Open carcase unit,80 cm wide
Open carcase unit,100 cm wide
Open carcase unit,160 cm wide
Open carcase unit,200 cm wide
max. 268.0 cm high
max. 268.0 cm high
max. 268.0 cm high
max. 268.0 cm high
max. 268.0 cm high
max. 268.0 cm high
Height: max. 268.0 cm Height reductions at intervals of 1 mm, width and depth reductions at intervals of 1.0 cm without surcharge.Width: see tableTotal depth: 59.0 cmInside depth: 56.0 cm
0204
0205
0208
0210
0216
0220
Open carcase unit with fully accessible corner 90°,110.7 x 112.7 cm wide
026191 L026192 R
Open corner carcase unit 45°,95.3 x 97.3 cm wide
02219
Left-hand type (L): left 2 fitted shelves and 1 clothes rod,each 106.7 cm wide; right 2 fitted shelves and 1 clothesrod, each 52.5 cm wide Right-hand type (R): interior fittings in reverse order
For production we require the details of series of assembly from left to right.
Interior fittings:1 fitted shelf without clothes rod 1 fitted shelf with clothes rod For production we require the details of series of assemblyfrom left to right.
L
For each wardrobe combination, the first element on theleft is considered to be the basic unit, incorporating bothouter side-sections. One can only include one basic unitin each combination. When adding on extension units,the right-hand side-section of the basic unit is employed as the end side-section of the complete combination.
max. 268.0 cm high
max. 268.0 cm high
For each project please remember to leave a 2.0 cmgap to the ceiling and at the side for assembly!
Please also note the functional andhigh-quality wardrobe interiorfittings as well as the special articles and possible special-sized products in the separatechapters on "Wardrobe interior fittings" and "Special products".
220E Schlafen: MULTI-FORMA II Seite 220 4. 2014E
Room and niche system for hard floors (e.g. tiles, parquet)
max. 272.6 cm high
IIIIII
A2181 LA2182 R
max. 272.6 cm high
max. 272.6 cm high
max. 272.6 cm high
max. 272.6 cm high
Front incl. top and bottom guide rails1 sliding-doorFront width: min. 60.0 cm, max. 110.0 cmRequired total width: min. 120.0 cm, max. 220.0 cm
Height: max. 272.6 cm Height reductions at intervals of 1 mm, width reductions at intervals of 1.0 cm without surcharge.Width: see table
Front incl. top and bottom guide rails2 sliding-doorsFront width and required total width: min. 117.0 cm, max. 217.0 cm
Front incl. top and bottom guide rails3 sliding-doorsFront width and required total width: min. 174.0 cm, max. 324.0 cm
Front incl. top and bottom guide rails3 sliding-doorsFront width and required total width: min. 174.0 cm, max. 324.0 cm
Front incl. top and bottom guide rails4 sliding-doorsFront width and required total width: min. 234.0 cm, max. 434.0 cm
from 60.0 to 93.0 cm from 93.1 to 110.0 cm
A3181 LA3182 R
A2230 A3230
A2345 A3345
A2372 A3372
A2460 A3460
Design AFronts – Sliding-doorsFronts: 3.5 cm thickSliding-doors with cushioning bracket at one or both sides (depending on width of sliding-doors);incl. top and bottom guide rails (aluminium profile):- The guide rails are always supplied in oversize and have to be cut to requirements on site- The top guide rail must be screwed onto the ceiling and the bottom guide rail fixed (glued) to the floor - A ceiling fitting profile is always used for sloping ceilings (possible from 30°)
with door cushioningone side
with door cushioningboth sides
Front width
Total width from 120.0 to 186.0 cm from 186.1 to 220.0 cm
from 117.0 to 183.0 cm from 183.1 to 217.0 cmFront and total width
from 174.0 to 273.0 cm from 273.1 to 324.0 cm
from 234.0 to 366.0 cm from 366.1 to 434.0 cm
from 174.0 to 273.0 cm from 273.1 to 324.0 cm
L L/R = left/right
Single-rail
Twin-rail
Triple-rail
Twin-rail
List of versions: see page 214
Please mark exactly in the frontsketch, or state inthe order (from theleft) which sliding-doors are to be fit-ted with a mirror.
Surcharge for mirror per sliding-door:
Surcharge for mirror:Each sliding-door canbe fitted with an optional mirror which is charged extra.
Twin-rail
IIIIII
Front and total width
Front and total width
IIIIII
IIIIII
Front and total width
IIIIII
Important notes: Generally speaking, you as a dealer/qualified fitter are responsible for the correct wall mounting of the units. That is why wall mounting should only be carried out by properly trained andqualified fitters. hülsta supplies materials for mounting units on walls for nearly all the units and which should be used for safety and for constructional reasons. The assembly materials supplied by hülsta (plugs, screws)are only suitable for fitting components on to concrete in firmness class (C12/15).For other materials (please see separate materials table in the wall composition chapter) we provide you with an assembly mortar set as an extra order. Please note that this assembly mortar set is also onlysuitable for the materials listed in the materials table.If walls are made up of other materials (e.g. plastered or lighter wall materials), one should use another method of mounting better suited to the load on site.Please note that if the units are not mounted properly on the wall, there is a risk of the units falling down or tipping over – especially when alternative mounting materials acquired on site have been used.For the reasons stated above it is absolutely essential to enquire about the composition of any walls before signing any contracts.
221
MULTI-FORMA II
E Schlafen: MULTI-FORMA II Seite 221 4. 2014 E
Room and niche system for carpets
max. 273.0 cm high
A21811 LA21812 R
max. 273.0 cm high
max. 273.0 cm high
max. 273.0 cm high
max. 273.0 cm high
Front incl. top and bottom guide rails1 sliding-doorFront width: min. 60.0 cm, max. 110.0 cmRequired total width: min. 120.0 cm, max. 220.0 cm
Height: max. 273.0 cm Height reductions at intervals of 1 mm, width reductions at intervals of 1.0 cm without surcharge.Width: see table
Front incl. top and bottom guide rails2 sliding-doorsFront width and required total width: min. 117.0 cm, max. 217.0 cm
Front incl. top and bottom guide rails3 sliding-doorsFront width and required total width: min. 174.0 cm, max. 324.0 cm
Front incl. top and bottom guide rails3 sliding-doorsFront width and required total width: min. 174.0 cm, max. 324.0 cm
Front incl. top and bottom guide rails4 sliding-doorsFront width and required total width: min. 234.0 cm, max. 434.0 cm
A31811 LA31812 R
A22301 A32301
A23451 A33451
A23721 A33721
A24601 A34601
Design AFronts – Sliding-doorsFronts: 3.5 cm thickSliding-doors with cushioning bracket at one or both sides (depending on width of sliding-doors);incl. top and bottom guide rails (aluminium profile):- The guide rails are always supplied in oversize and have to be cut to requirements on site- The top guide rail must be screwed onto the ceiling and the bottom guide rail fixed (glued) to the floor - A ceiling fitting profile is always used for sloping ceilings (possible from 30°) Please note: The carpet must be cut out to requirements on site and the bottom guide rail fitted.
with door cushioningone side
with door cushioningboth sides
L L/R = left/right
Single-rail
Twin-rail
Triple-rail
Twin-rai
Please mark exactly in the frontsketch, or state inthe order (from theleft) which sliding-doors are to be fit-ted with a mirror.
Surcharge for mirror per sliding-door:
Surcharge for mirror:Each sliding-door canbe fitted with an optional mirror which is charged extra.
Twin-rail
IIIIII
from 60.0 to 93.0 cm from 93.1 to 110.0 cmFront width
Total width from 120.0 to 186.0 cm from 186.1 to 220.0 cm
from 117.0 to 183.0 cm from 183.1 to 217.0 cmFront and total width
from 174.0 to 273.0 cm from 273.1 to 324.0 cm
from 234.0 to 366.0 cm from 366.1 to 434.0 cm
from 174.0 to 273.0 cm from 273.1 to 324.0 cm
IIIIII
Front and total width
Front and total width
IIIIII
IIIIII
Front and total width
IIIIII
Important notes: Generally speaking, you as a dealer/qualified fitter are responsible for the correct wall mounting of the units. That is why wall mounting should only be carried out by properly trained andqualified fitters. hülsta supplies materials for mounting units on walls for nearly all the units and which should be used for safety and for constructional reasons. The assembly materials supplied by hülsta (plugs, screws)are only suitable for fitting components on to concrete in firmness class (C12/15).For other materials (please see separate materials table in the wall composition chapter) we provide you with an assembly mortar set as an extra order. Please note that this assembly mortar set is also onlysuitable for the materials listed in the materials table.If walls are made up of other materials (e.g. plastered or lighter wall materials), one should use another method of mounting better suited to the load on site.Please note that if the units are not mounted properly on the wall, there is a risk of the units falling down or tipping over – especially when alternative mounting materials acquired on site have been used.For the reasons stated above it is absolutely essential to enquire about the composition of any walls before signing any contracts.
Room and niche system
Accessories for room and niche system
LED lamp for partitions and outer side sectionsfor fitting on partitions or outer side sections of open carcase units.In this case the total depth increases by 2.5 cm.LED lamp, 12 V, 7 or 14 W, incl. remote control unit
The LED lamps are fitted all along the front of the carcase sides and shine to the side (when fitted on outer side sections they shine to one side, when fitted on partitions to both sides).
Room divider “storage island”usable both sides
Width: 148.0 cmHeight without glass bonnet: 71.5 cmTotal height: 85.3 cmDepth: 70.0 cm
Front side: 6 drawers with cushioned auto pull-in feature as fully pull-out units, with extra stained glass surface at topRear side: 4 shelf compartments below a bench with high-quality seat upholstery in genuine black leather, 100% Nappa leather, pigmented
Room divider "storage island" optionally in white lacquer (standard), light interior veneer or dark interior veneer. Please state clearly in the order!
520
298299
LED lamp for fitting on partitions; 14 W
LED lamp for fitting on outer side sections; 7 W
GENUINELEATHER
Front side:
Rear side:
Illustration:LED lamp on partition(illuminates both sides)
Usable dims. (per open compartment):Height: 15.4 cmWidth: 68.0 cmDepth: 32.5 cm
222E Schlafen: MULTI-FORMA II Seite 222 4. 2014E
List of versions: see page 214
Please also note the functional andhigh-quality wardrobe interiorfittings as well as the special articles and possible special-sized products in the separatechapters on "Wardrobe interior fittings" and "Special products".
Please also note the functional andhigh-quality wardrobe interiorfittings as well as the special articles and possible special-sized products in the separatechapters on "Wardrobe interior fittings" and "Special products".
223
MULTI-FORMA II
E Schlafen: MULTI-FORMA II Seite 223 4. 2014 E
Room and niche system
Wall or ceiling fitting profile
28922891
Single-rail
2893
Twin-rail Triple-rail
Wall or ceiling fitting profileFitting profiles must be used for each wall and/or ceiling if the walls are not exactly vertical and/or the ceiling not straight and they exceed the maximum tolerance of 8 mm per1 m length (also see page 217). The illustrated fitting profile is used both for the walls as well as for the ceiling. The fitting profiles are used to equalise the distance betweenthe top and bottom guide rails to the wall and between the top guide rail to the ceiling. They are always supplied in oversize and have to be cut to requirements on site. They arecharged per 10 cm metre length or part thereof. Fitting profiles must be ordered for each wall and ceiling that is not straight (beyond the maximum tolerances).Height of fitting profile: 50 mm. It can be adjusted by 25 mm (i.e. max. 75 mm high).When using the fitting profiles, please state the true ceiling height!
A
Wall or ceiling fitting profilePrice per 10 cm length or part thereof
A A
Wall or ceiling fitting profile Examples of use
Equalising height to ceiling
Equalising distance to wall
50-75 mm
50-75 mm
Fitting profile
Topguiderail
Door
50-75 mm
Side slopingEvery sliding-door in the room and niche system can be sloped at the side. The following points must be noted:
- If width A (see sketch 1) exceeds/equals 55.0 cm, the door is still supplied as a sliding-doorSurcharge for side sloping per sliding-door (as sliding-door) type 9994
- If width A (see sketch 2) is less than 55.0 cm, the door is supplied as a fixed unit Surcharge for side-sloping per sliding-door (as fixed unit) type 9995
- If width A (see sketch 3) is less than 55.0 cm - but the door is still meant to be used as a sliding-door - a support rail and fitted shelves must be ordered extra. This railcan only be fitted on the front side of open carcase units in front of a full-length row of fitted shelves. In this case the sliding-door can not be used as a room divider. The support rail is charged per 10 cm length or part thereof. One fitted shelf must be ordered for every open carcase unit included. A one-sided cushioning bracket is usedup to 55.0 cm width A.Surcharge for side sloping of sliding-door type 9996Surcharge for support rail (per 10 cm length or part thereof) type 9997Surcharge for fitted shelf (per each open carcase unit) type type 79000
We recommend getting in touch with hülsta before ordering in order to sort out technical details.
Sketch 1 Sketch 2 Sketch 3