Multi-purpose Professional Hair Iron · 2016. 2. 19. · 16 03 Thank you for purchasing the...

Tame your Mane Instruction Manual

Mult i -purpose Profess ional Hair I ron

Distributed by: Thane Direct Canada, Inc., Toronto, ON www.thane.ca Thane International, Inc., La Quinta CA 92253 www.thane.comThane Direct UK Ltd. Admail ADM3996 London W1T 1ZU www.thanedirect.co.uk

CBSS-E-R2

02

Contents

1. Introduction P.03

2. Important Safety Instructions P.04

3. Product Features P.07

4. Optional Items P.08

5. Operating Instructions P.09

• Preparing CB Steam Styler™ P.09

6. Hair Styling P.10

• Hair Straightening P.10

• Hair Volume P.10

• Using the Detangler P.11

• Styling Wavy Hair P.11

• Using the Hair Crimper P.12

7. CB Steam Styler™ Styling Tips P.13

8. Product Cleaning and Care P.15

9. Storage P.16

10. ALCI Instruction P.17

10. ALCI Instruction

IF YOU MUST USE YOUR STRAIGHTENING IRONS IN THE BATHROOM, INSTALL A GFCI* NOW!

Your local electrician can help you decide which type is best for you -- a portable unit that plugs into theelectrical outlet or a permanent unit installed by your electrician. The National Electrical Code nowrequires GFCI’s in bathrooms, garages, and outdoor outlets of all new homes.

WHY DO YOU NEED A GFCI?

Electricity and water don’t mix. If your straightening iron falls in water while it’s plugged in, the electric shock can killyou… even if the switch is “off.”A regular fuse or circuit breaker won’t protect you under these circumstances. A GFCI offers you fargreater protection.

A GFCI can save your life! Compared to that, the price is small! Don’t wait… install one now!*GFCI is a sensitive device which reacts immediately to a small electric current leak by stopping the electricity flow.

STOP

This message about...

GroundFaultCircuitInterrupters…can save a life!

17

16

03

Thank you for purchasing the California Beauty® Steam Styler™, the new multi-purpose professional

hair iron with a unique Steam-mist technology.

The Steam-mist technology provides the right amount of steam to help protect your hair and improve

the straightening or curling effect. Variable heat control allows you to choose the temperature that’s

appropriate for your hair. The on-off switch is conveniently placed so the unit cannot be switched on by

accident. The high quality plates move smoothly over your hair and the spring-loaded handle allows you to

choose exactly how much pressure you need in order to style your hair. The tips of the flat and waved

plates can be pinched together for creative detailing and the irons can be used to create volume and the

latest hairstyles from flips to bobs to straight.

9. StorageUnplug the CB Steam Styler™ and let it cool off before storing. If storing for long time, empty water tank. Place CB Steam Styler™ and all accessories back into the box and store out of reach of children in a safe, dry location. NOTE: Avoid any contact between the hot ceramic plates and the power cord. Do not wrap cord around the appliance. Use the pouch (optional item) provided to store CB Steam Styler™,plates and accessories.

15

8. Product Cleaning and CareFOR BEST RESULTS USE DISTILLED WATER

To ensure the proper function and performance of your CB Steam Styler™, clean the appliance regularly.1. Disconnect the appliance from the electrical outlet (socket) and wait until the CB Steam Styler™ has cooled off. 2. Clean the CB Steam Styler™ and all accessories with a slightly damp cloth. DO NOT immerse CB Steam Styler™ in water.3. Use the cleaning brush to clean inside the plate’s holes.4. Wipe all CB Steam Styler™ parts dry with a dry cloth.

Cleaning Mineral Deposits:One common problem with all steamers is mineral deposit caused by a high mineral content in many municipal water supplier.Mineral residue inside of the internal pipes and heater can cause intermittent steaming or, in some cases no steaming at all.NOTE: To reduce or eliminate the occurrence of mineral deposit, we recommend the use of de-mineralized or distilled water.However regular tap water can also be used. The section below can be used to reduce mineral deposit. If not using de-mineralized or distilledwater, we recommend you follow this procedure monthly.

1. Disconnect the appliance from the electrical outlet (socket) and wait until the CB Steam Styler™ has cooled off. 2. Mix a solution of 50% vinegar and 50% water, and pour it into the water tank chamber.3. Allow it to stand for 40 minutes.4. Drain the solution out from the water tank into a sink.5. Pour clean water in the water tank, drain, and repeat until the vinegar odour dissipates.

NOTE: Do not use any harsh cleaning agents or abrasives.

04

2. IMPORTANT SAFETY INSTRUCTIONSWhen using electrical appliances, basic safety precautions should always be followed,especially when children are present, including the following:READ ALL INSTRUCTIONS BEFORE USEPlease read these safety instructions carefully before you begin using the CB Steam Styler™. This will safeguardyou from any potential hazards and the appliance from damage caused by incorrect operation. This applianceshould only be used with products designed for use with heated hair styling/straightening irons.WARNING – Failure to comply may result in serious injury. To reduce the risk of burns, electrocution, fire, orinjury to persons:1. Always unplug this appliance immediately after use.2. Do not use while bathing. For cleaning refer to the “Cleaning and Care” section of this manual.3. DO NOT touch hot plates. The high temperature could cause serious burns. Always allow to cool off

completely once switched off.4. Do not use this appliance near bathtubs, showers, basins or other vessels containing water.5. Don’t allow dripping wet hair to come into contact with this appliance.6. Do not use the appliance with wet or damp hands.7. Make sure the appliance is connected to an outlet (socket) having the same electrical configurations

as the plug.8. As with most electrical appliances, electrical parts are electrically “live” even when the power switch is

set to “OFF” position. Do not disassemble the product even when it is turned off.9. Do not place in or drop into water or other liquid.10. Do not reach for an appliance that has fallen into water. Unplug immediately.11. An appliance should never be left unattended when plugged in.12. This appliance is not intended for use by persons (including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.

13. Children should be supervised to ensure that they do not play with the appliance.14. Use this appliance only for its intended purpose as described in this manual. Do not use attachments not recommended by the manufacturer.15. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly

14

For Thick Hair:Part the hair into four 1 or 2-inch (2.5-5 cm) sections. Start flat ironing each section of the hair from the nape or back of the

neck and move towards the front. This will give you more control.

For an Evening Look:Use the double plate and section the hair into 2 large sections. Start at the nape or back of the neck and roll the hair under

steaming as you go. Hold it for a couple of seconds at the end, this allows for a good strong hold.

Resistant / Curly Hair:Part the hair into four 1 or 2-inch (2.5-5 cm) sections; pull the comb through as you flat iron. This will help straighten the hair out

more.

For Coarse / Thick HairBe sure to use smaller sections.

Flip OutInsert a 2-inch (5 cm)

section of hair between

the plates, then

squeeze the handle

together and glide

slowly through hair

beginning at the roots,

slightly flip out the ends.

Flip InInsert a 2-inch (5 cm)


the plates, then squeeze

the handle together and

glide slowly through hair

beginning at the roots,

slightly flip in the ends.

05

IMPORTANT SAFETY INSTRUCTIONS (cont.)qualified persons in order to avoid a hazard.

16. Keep the cord away from heated surfaces. Do not wrap the cord around the appliance. Carefully arrange the power cord so that no one can trip over or tread on it.

17. Never pull on the power cord. To avoid potential hazards hold the power plug when removing itfrom the socket.

18. Do not use an extension cord with this appliance.19. Keep all packing material e.g. plastic bags away from children.20. This appliance gets hot when in use. Do not let eyes or bare skin touch the heated surfaces.21. Do not place this appliance directly onto any heat sensitive surface while it is hot or plugged in.22. While emitting steam, this hair iron may cause burns if it is used too close to the skin, scalp, or eyes,

or if it is used incorrectly.23. Never use steam within 3 inches of scalp. Be sure the hair is towel dry at the roots to prevent

steam from touching your scalp.24. To reduce the risk of contact with hot water emitted from steam vents, test iron before each use by

holding it away from body and operating steam button.25. Do not pack the appliance away until the plates have completely cooled.26. Only use this appliance to style real human hair, do not use on artificial or animal hair.27. Do not clean the appliance with thinner, gasoline, alcohol or any harsh cleaning agents or abrasives.28. Never place towels or similar items over or under the CB Steam Styler™ to prevent possible overheating

and the risk or fire.29. Never use while sleeping.30. Never drop or insert any object into any opening.31. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being

administered.32. Fill reservoir with water only. FOR BEST RESULTS USE DISTILLED WATER.

SAVE THESE INSTRUCTIONS

13

Flat StraightInsert a 2-inch (5 cm)


the plates, then

squeeze the handle

together and glide

slowly through hair

from the roots to the

ends.

Soft CurlsInsert a 2-inch (5 cm)


the plates gently

squeeze handle together

and glide iron to the

ends, then wind hair

around plates.

7. CB Steam Styler™ Styling Tips General RuleTake a 1 or 2-inch (2.5-5cm) section of hair (2 in front / 2 in back) and clamp the Steam Styler™ down as close to the scalp as possi-

ble. Slowly pull iron down the length of the hair. (Be sure to read the directions to see what heat setting you should have the iron

on and how long to keep the iron on hair).

06

For 120V units equipped with ALCI plug onlyCheck ALCI every time you use the CB Steam Styler™This straightener is equipped with an Appliance Leakage Circuit Interrupter (ALCI), a safety feature that renders it inoperable under some abnormalconditions, such as immersion in water. To make sure the ALCI is functioning properly and the exclusive water sensing system (ALCI) is working,perform the following test.

1. Plug in straightener and press test button on plug.2. Straightener will stop working. There will be an audible click and reset button will pop out.3. To reset ALCI with a reset button: Unit should be unplugged. Then push reset button in, and reinsert plug into outlet.4. Be sure to repeat test every time you use straightener to confirm ALCI is operational.5. If ALCI is not functioning properly, return straightener to service center.6. It is important that if immersion occurs, this unit be brought to a service center. Do not try to reset. Should the straightener go off and the

reset button pop out during use, this could indicate a malfunction in the straightener. Remove plug from outlet and allow the dryer to cool.Reset the ALCI. Reinsert plug into outlet. Straightener should function normally. If not, return to service center for examination and repair.

Test Button

Reset Button

12

normal to thick hair 8 seconds). NOTE: The combination of heat and steam gives the hair body and ensures long lasting results.

The appliance has no automatic steam function, but as long as the steam button is pressed the steam will be released.

6. Open the plates and allow the strand to gently glide out.

7. Repeat steps 2 to 6 on the remaining sections of hair.

8. To achieve the desired result you may need to repeat the process.

9. To release steam, press the steam button. Make sure the CB Steam Styler™ is 3 inches (7-8 cm) away from the scalp.


Using the Hair Crimper1. Wash your hair thoroughly (optional), dry and comb it straight.

2. Apply hair styling lotion in moderate quantities (optional).

3. Insert the hair crimper plates. Turn the CB Steam Styler™

on and let it heat up.

4. Split your hair into approximately 2 inches (5 cm) wide strands and place each section of hair between the heated plates as close as

possible to the hairline. CAUTION: Be careful not to get burnt.

5. Close the plates down with the hair in between. Hold the appliance in this position according to your hair type (thin hair 5 seconds,

normal to thick hair 8 seconds). NOTE: The combination of heat and steam gives the hair body and ensures long lasting results.


6. Open the plates and allow the strand to gently glide out. Crimp your hair down from the hairline to the end of the strand.

7. Repeat steps 2 to 6 on the remaining sections of hair.

8. To achieve the desired result you may need to repeat the process.



Steam ButtonWater Tank

Light IndicatorFlat Plates

Cleaning

Brush

3. California Beauty® Steam Styler™ Product Features

07

Steam Button – steam is produced when the steam button is pressed down.

Water Tank – detaches for easy fill. Use either distilled water or hot/cold tap water.

Light Indicator – indicates the CB Steam Styler™ is “ON” when lit. When blinking indicates the CB Steam Styler™ is heating up.

Temperature Regulator – regulates the temperature by turning Temperature Regulator Button clockwise.

Flat Plates – included for straightening and quick touch-ups.

Cleaning Brush – use for cleaning plates.

Rating: ETL/cETL – 120V 60Hz 180W

GS – 220-240V 50-60Hz 145W

08

One Wave Plates - create big

wave pattern and flip

Multiple Wave Plates - create small

wave pattern

Detangler Plate (used with Flat

Plate) - untangle knots,

works even on curly hair

4. Optional Items

Pouch – store CB Steam Styler™,

plates and accessories

Hair Crimper – crimps hair to add

waves

Hair Brush – for everyday brushing

11

NOTE: Do not stop for more than two (2) seconds at any one point on the section being styled. Whichever technique you use,

repeat the process a few times for smooth, shiny and silky hair. Normally one pass would be sufficient.

9. For the final finish shake your head lightly and comb backward.



Using the Detangler1. Wash your hair thoroughly (optional), and dry it.

2. Prepare the CB Steam Styler™ by inserting detangler plate (this plate is used in combination with flat plate with holes).

3. Separate out a tangled section of hair. Place it between the open plates. CAUTION: Be careful not to get burnt.

4. Gently close the plates with the hair in between.

5. Slowly glide CB Steam Styler™ forward from the hairline to the end of the hair section to unlock knots and detangle hair.

NOTE: Repeat the process a few times for smooth, shiny and silky hair. Normally one pass would be sufficient.



Styling Wavy Hair 1. Wash your hair thoroughly (optional), dry and comb it straight.

2. Apply hair styling lotion in moderate quantities (optional).

3. Insert either one waved or multiple waved plates, depending on the amount of waviness you want. Turn the CB Steam Styler™ on and let it

heat up.

4. Split your hair into approximately 2 inches (5 cm) wide strands and place each section of hair between the heated plates as close as

possible to the hairline. CAUTION: Be careful not to get burnt.

5. Close the plates down with the hair in between. Hold the appliance in this position according to your hair type (thin hair 5 seconds,

10

6. Hair StylingHair Straightening

1. Wash your hair thoroughly (optional), dry and comb it straight.

2. Prepare the CB Steam Styler™ by inserting flat plates.

3. Separate out a section of hair - width of 3 fingers; the thinner the section, the more evident the result.

4. Apply hair styling lotion in moderate quantities (optional)

5. Place each hair section, one at a time, between the open straightening plates, as close as possible to the hairline.

CAUTION: Be careful not to get burnt.


7. Slowly glide CB Steam Styler™ forward from the hairline to the end of the hair section, and then let hair hang in front of your face.

NOTE: Do not stop for more than two (2) seconds at any one point on the section being styled. Whichever technique you use,

repeat the process a few times for smooth, shiny and silky hair. Normally one pass would be sufficient.



Hair Volume1. Wash your hair thoroughly (optional), dry and comb it straight.

2. Prepare the CB Steam Styler™ by inserting flat plates.

3. Separate out a section of hair - width of 3 fingers; the thinner the section, the more evident the result.

4. Apply hair styling lotion in moderate quantities (optional)

5. Place each hair section, one at a time, between the open straightening plates, as close as possible to the hairline.

CAUTION: Be careful not to get burnt.


7. Rotate using an upward motion to lift the lower section of your hair from the scalp and create volume.

8. Slowly glide CB Steam Styler™ forward from the hairline to the end of the hair section, and then let hair hang in front of your face.

09

5. Operating InstructionsPlease read these operating instructions carefully before you begin using the CB Steam Styler™. In no event will the prod-uct supplier or manufacturer be liable for any special, incidental or consequential damages by incorrect operation.

Preparing CB Steam Styler™1. Remove the Water Tank located in the middle of the CB Steam Styler™ by pulling it out. NOTE: The CB Steam Styler™ should be unplugged.

2. Open the water tank chamber by pulling out the rubber plug. Fill it with either distilled water or hot/cold tap water. Do not use any other

liquids. To reduce or eliminate the occurrence of mineral deposit, we recommend the use of de-mineralized or distilled water in the Main

Unit. However regular tap water can also be used.

3. Close the rubber plug and put the filled water tank back by snapping into place.

4. Choose appropriate pair of plates, make sure the plate with “up” go on top and the plate with “down” go on the bottom. To change plates

press the release buttons on each side of the plate and slide it out or in.

Warning! To avoid the danger of getting burnt, allow the plates to cool down prior to changing them.

5. Place the CB Steam Styler™ on its non-slip rubber base onto an even surface, and plug into the wall socket. Test safety plug (120V) units only.

6. Turn the Temperature Regulator to the temperature setting that is most suited to your hair.

7. For first-time users, those with fine hair or chemically treated hair or if you are unsure of your hair condition, it is advisable to start with a

lower temperature setting (1-4). Do not heat to setting 5 or above as it could damage your hair.

• For normal hair use middle temperature. Turn the temperature regulator button clockwise to "5" to reach the middle

temperature between 300ºF to 340ºF (150ºC to 170ºC).

• For healthy, thick and coarse hair, it is safe to apply more heat with the max temperature setting to “10” between 375ºF to 410ºF (190ºC to 210ºC ) .

8. The LED light will blink while the CB Steam Styler™ is heating up. The light will stop blinking once the exact operating temperature is

reached. The CB Steam Styler™ is set to the optimum temperature for your hair and this temperature is constantly maintained.

NOTE: The unit can also be used without the steam.


Date post:	27-Aug-2020
Category:	Documents
Upload:	others
View:	2 times
Download:	0 times

Multi-purpose Professional Hair Iron · 2016. 2. 19. · 16 03 Thank you for purchasing the...

Documents