+ All Categories
Home > Documents > Multibowl Wellhead System - McClinton Energy Group Wellhe… · WELLHEAD SWECO’s Multi-Bowl...

Multibowl Wellhead System - McClinton Energy Group Wellhe… · WELLHEAD SWECO’s Multi-Bowl...

Date post: 07-May-2018
Category:
Upload: lecong
View: 219 times
Download: 5 times
Share this document with a friend
1
© 2012 McClinton Energy Group. All right reserved. McClinton Energy Group 11200 W I-20 E Odessa, Texas 79768 USA Tel: (432) 563-5500 Fax: (432) 563-5506 www.mcclintonenergy.com Multi-Bowl Wellhead System Energy GROUP cClinton WELLHEAD SWECO’s Multi-Bowl Systems support and seal two strings of pipe in a single head. They consist of two pieces: a lower housing and an upper housing-installed as one complete unit. If the intermediate casing sticks, the mandrel casing hanger can not be used. The two housings can be separated and the emergency slip-style casing hanger can easily be installed. SWECO’s Multi-Bowl Systems come complete with wear bushings, running tools, standard and emergency packoff, and combination test plug/running-retrieving tool. Features Ÿ Field proven Ÿ Saves rig time by reducing installation time Ÿ Increases safety by reducing BOP / diverter handling Ÿ Fluted mandrel casing hanger allows cement returns Outlets Ÿ Studded Side Outlets Flexibility Ÿ Standard equipment Ÿ Emergency equipment Manufacturing Standard Ÿ API-6A Availability Ÿ 11” 5,000 psi wp systems Ÿ 11” 10,000 psi wp systems Ÿ 13-5/8” 5,000 psi wp systems Ÿ 13-5/8” 10,000 psi wp systems Ÿ 10-3/4”, 9-5/8” and 8-5/8” surface casing compatibility Ÿ 7-5/8” and 7” intermediate casing compatibility Ÿ 2-7/8” and 2-3/8” tubing compatibility Ÿ Additional sizes available upon request Bottom Connections Ÿ Slip-on weld Ÿ Slip-on weld with O-ring Ÿ Threaded (8rd, Buttress)
Transcript

© 2012 McClinton Energy Group. All right reserved.

McClinton Energy Group

11200 W I-20 E Odessa, Texas 79768 USA

Tel: (432) 563-5500Fax: (432) 563-5506www.mcclintonenergy.com

Multi-Bowl Wellhead System

EnergyG R O U P

cClinton

W E L L H E A D

SWECO’s Multi-Bowl Systems support and seal two strings of pipe in a single head. They consist of two pieces: a lower housing and an upper housing-installed as one complete unit. If the intermediate casing sticks, the mandrel casing hanger can not be used. The two housings can be separated and the emergency slip-style casing hanger can easily be installed.

SWECO’s Multi-Bowl Systems come complete with wear bushings, running tools, standard and emergency packoff, and combination test plug/running-retrieving tool.

Features

Ÿ Field provenŸ Saves rig time by reducing installation timeŸ Increases safety by reducing BOP / diverter handlingŸ Fluted mandrel casing hanger allows cement returns

Outlets

Ÿ Studded Side Outlets

Flexibility

Ÿ Standard equipmentŸ Emergency equipment

Manufacturing Standard

Ÿ API-6A

Availability

Ÿ11” 5,000 psi wp systemsŸ11” 10,000 psi wp systemsŸ13-5/8” 5,000 psi wp systemsŸ13-5/8” 10,000 psi wp systemsŸ10-3/4”, 9-5/8” and 8-5/8” surface casing compatibilityŸ7-5/8” and 7” intermediate casing compatibilityŸ2-7/8” and 2-3/8” tubing compatibilityŸAdditional sizes available upon request

Bottom Connections

Ÿ Slip-on weldŸ Slip-on weld with O-ringŸ Threaded (8rd, Buttress)

Recommended