TruServicesPunching Tools
MultiTool
Productive punching.The MultiTool integrates up to 10 different punch and die inserts in one tool holder. With the new able to punch up to 40 different diameters with one single tool only.
Your benefits at a glance:� An increased number and variety of tools on the machine.� Shorter set-up and tool-changing times.� A significant increase in productivity when punching small geometries.
Machine Tools/Power ToolsLaser Technology/ElectronicsMedical Technology
� A significant increase in productivity when punching small geometries.� Tools and tool holders can be customized to your needs when it comes to special geometries.� New: MultiCut inserts ensure maximum flexibility in terms of diameter size.
integrates up to 10 different punch and die inserts in one tool holder. With the new MultiCut inserts, you are now able to punch up to 40 different diameters with one single tool only.
A significant increase in productivity when punching small geometries.
NewMultiCut inserts
A significant increase in productivity when punching small geometries.Tools and tool holders can be customized to your needs when it comes to special geometries.
inserts ensure maximum flexibility in terms of diameter size.
Maximum punching productivity.
5-station / 10-station MultiTool
With genuine TRUMPF MultiTools, you are able to
increase the productivity of your punching machine
significantly: up to 10 different punch and die inserts are
combined in one tool holder. As a result, it is possible to
increase the available number of tool stations on your
linear magazine and reduce set-up and tool-changing
times on your machine.
The MultiTool is ideal for processing sheets with different
small punch geometries such as circles, squares or
rectangles of different sizes. And should the desired shape
not be available, then our specialists are happy to develop
special shapes in exact accordance with your needs.
Brand new: MultiCut inserts
When it comes to selecting diameter sizes, you now have
even greater flexibility thanks to the new MultiCut inserts for
the MultiTool. Each punch insert, having four different radii,
can produce four different diameters. Therefore it is possible
to punch 40 different diameters with a 10-station MultiTool -
without having to set-up the machine.
01.04.2014
Melbourne SydneyPhone: 03 9244 3500 Phone: 02 9638 4463Fax: 03 9244 3501 Fax: 02 9638 2230Email: [email protected] Email: [email protected]
40 different punching operations with one tool.
Technical Data
Material Steel, stainless steel, aluminum
Sheet thickness Steel, aluminum: 0.5 - 4.5 mmStainless steel: 0.5 - 3.0 mm
Machine option MultiTool
Programming TruTops V1.0
Punch inserts of different shapes
Technical Data
Material Steel, stainless steel, aluminum
Sheet thickness* 5-station MultiTool: 1.0 - 2.0 mm10-station MultiTool: 1.0 mm
Machine option MultiTool
Programming TruTops V5.0
* For the MultiTool 5-station/10-station with MultiCut inserts apply the same sheet thickness ranges as do with the standard
New
MultiCut punch inserts Punch-up path
the same sheet thickness ranges as do with the standard MultiTool – with quality restrictions.