1

MULTIVIEW DRAWINGThe purpose of a Multiview Drawing is to represent a three dimensional object on a two dimensional sheet of paper or in a two dimensional drawing space.

Multiview Drawings are used by Engineers, Architects and Contractors to Design and Build tiny objects such as microchips or large objects such as buildings, shopping centers, bridges and interstate interchanges.

Visualizing a Multiview Drawing

2

Orthographic Projection

Projection of points at 90 degrees to a parallel projection plane.

Object Suspended in a Glass Box to Produce 6 Principal Views

3

Unfolding the Glass Box to Produce a Six-View Drawing

U.S. Standard for the Arrangement of the Six Principal Views

4

Application of the Alphabet of Lines to Multiview Drawings

Proper Application of the Precedence of Lines

5

Isometric View of Object

Creating a Three-View Orthographic Drawing

6

Creating a Three-View Orthographic Drawing

Creating a Three-View Orthographic Drawing

7

Creating a Three-View Orthographic Drawing

Creating a Three-View Orthographic Drawing

8

Creating a Three-View Orthographic Drawing

Complete Three-View Orthographic Drawing