Request for Proposal #2019-05-407
Office Furniture
Municipality of the District of Lunenburg
210 Aberdeen Road Bridgewater Nova Scotia Canada B4V 4G8 Phone: 902.543.8181 / Fax: 902.543.7123 / Website: www.modl.ca
Issued: March 10th, 2020
Date of Closing: 4:00 pm, March 27th, 2020
2
Table of Contents
1.0 Request for Proposal
1.1 Background
1.2 Scope of Work
1.3 General Product Requirements
1.4 Product Details
1.5 Privilege Clause
2.0 Contract Terms and Conditions
2.1 Definitions
2.2 Contract Term
2.3 Legislative Requirements
2.4 Indemnity
2.5 Insurance
2.6 Supplier Information Form
2.7 Notices
2.8 Changes, Alterations, Amendments
2.9 Termination
2.10 Assignment
3.0 RFP Submission Information
3.1 Key Dates
3.2 Form of Submission
3.3 Proposal Submission Instructions
3.4 Enquiries
3.5 Amendments, Withdrawal and Disqualification
3
3.6 Costs Related to Solicitation Process
3.7 Conflict of Interest
3.8 MODL’s Rights
4.0 Evaluation and Award
4.1 Evaluation Criteria and Process
4.2 Notification, Award and Debriefing
5.0 RFP Submittal Documentation
5.1 Company Information
5.2 Addenda
5.3 Aesthetics
5.4 Company Profile
5.5 Supplier Statement
6.0 Appendix A – Furniture Schedule & Standard of Acceptance
7.0 Appendix B – Location Plans
8.0 Appendix C – T1204 Supplier Information Form
4
1.0 Request for Proposal
1.1 Background
1.1.1 In this Request for Proposal (“RFP”), the Municipality of the District of Lunenburg (hereinafter “MODL”) is seeking proposals for multi-use commercial grade furniture as well as case goods, from qualified firms. Commercial multi-use furnishing will be predominantly located in private offices, open office work areas, meeting rooms, special purpose spaces as well as general reception rooms. Layouts provided in Appendix B.
The multi-use commercial furnishings supplied for MODL must be light weight, moveable, and durable to accommodate the many uses of the space. All furnishings must be delivered and installed by July 21st, 2020.
1.2 Scope of Work
1.2.1 The Contractor shall supply, deliver and install commercial grade furnishings for all common and staff spaces, and private offices. Suppliers are to submit furniture as specified or with furniture with a similar look, feel, quality and dimensions as noted in Furniture Schedule & Standard of Acceptance document (Appendix A).
1.2.2 As part of the Contract, the Contractor shall meet with the Interior Designer and MODL to review the proposed commercial furnishings prior to final selection and ordering. During this time, the Interior Design will select final colours, fabrics and styles.
1.2.3 The Contractor shall deliver and install all commercial grade furnishings to the new Municipal building (currently under construction) in Cookville, NS no later than July 21th, 2020.
1.3 General Product Requirements
The successful firm shall supply MODL with the following:
1.3.1 Lightweight + Movable + Durable
Commercial furnishings shall be stain repellent. Products used must have a minimum ten-year lifespan. All seating products must hold weights of a minimum of 250 lbs. All commercial furnishings must have a commercial grade heavy-duty wear factor. As the co-working area is an ever-changing event space, commercial furnishings must be lightweight. Pieces must be easily dis-assembled and movable. Commercial furnishings for the co-working area shall be moveable by one person with secure resting positions (such as lockable casters). Chairs shall be stackable. All furniture must be able to fit through a standard 34 inch doorframe.
5
1.3.3 Delivery and Installation
The Contractor shall deliver and install all furnishings by July 21st, 2020. The date of installation shall be arranged with MODL prior to delivery to accommodate construction schedule. The space is all on ground floor. The Contractor is responsible for all unloading, and installation under this Contract.
1.3.4 Warranty
Commercial furnishings supplied shall have a minimum 10-year warranty from date of installation.
1.3.5 Training
Where furniture components require special instruction to move, adjust or to install, training shall be supplied to MODL by the Contractor.
1.4 Product Details
MODL requires furnishings to have a similar look and feel for cohesion of interior spaces, please refer to Appendix A .
1.5 Privilege Clause
MODL reserves the right to reject any or all proposals. The lowest price or any proposal will not necessarily be accepted.
MODL has the right to accept or reject any or all items within the proposal. Specifically, MODL reserves the right to award portions of the works to various vendors based on best overall value.
MODL reserves the right to cancel this RFP if unforeseen problems arise or if information becomes available after the RFP closing date that significantly changes the project.
6
2.0 Contract Terms and Conditions
2.1 Definitions
In this document:
2.1.1 The words “MODL” means Municipality of the District of Lunenburg
2.1.2 The words “Closing Date and Time” means the date and time set out on the cover page for the submission of Proposal(s) after which time no further proposals can be accepted.
2.1.3 The word “Agreement” or “Contract” means the agreement to be entered into between the
successful proponent and MODL for the services requested.
2.1.4 The word “Contractor” means the successful Proponent whose proposal is selected by
MODL and enters into a Contract with MODL for the request herein.
2.1.5 The work “Proponent” means the vendor(s) who submit proposals for the request in this document.
2.1.6 The words “local time” mean the local time at MODL’s address (Atlantic Time Zone).
2.1.7 The words “Proposal(s)”, “Bids” and “Submission(s)” are to be considered as having the same meaning herein and refer to the submission by the Proponent to the request herein.
2.1.8 The words “RFP” means Request for Proposals.
2.1.9 The words “Interior Designer” means By and Large Design Studios Inc.
2.1.10 The words ‘evaluation committee’ means a select group chosen from the ‘interior designer’
team and MODL team.
2.2 Contract Term
Goods shall be delivered to MODL no later than July 21st, 2020. Delivery shall be to the new Municipal Building and to be clear – this proposed contract includes supply, delivery, installation and warranty.
2.3 Legislative Requirements
2.4.1 The Contract shall be construed, interpreted and governed by the applicable laws in force in the Province of Nova Scotia and the laws of Canada applicable therein and the Courts of the Province of Nova Scotia shall have exclusive jurisdiction with respect to all matters relating to this Contract.
2.4.2 The Contractor shall be responsible for compliance with all current Canadian Federal, Provincial and Municipal Acts, Orders, Regulations and Laws which exist or may come into existence during the term of the Agreement.
7
2.4 Indemnity
The Contractor covenants to indemnify and save harmless MODL, its directors, officers, employees and agents from and against any and all liabilities, losses, claims, demands, building damage, costs and expenses (including lawyer’s fees and litigation expenses on a solicitor and client basis) whatsoever to which MODL, its directors, officers, employees and agents may become subject to as a result of the breach of any covenant, agreement, term or condition of this Agreement or as a result of or in connection with the use and occupation of the Premises, by the Contractor or its servants, agents, employees, contractors, invitees or others for whom it is in law responsible or arising out of or resulting from the negligence or wilful misconduct of the Contractor or its servants, agents, employees, contractors, invitees or others for whom it is in law responsible except where caused by the negligence or wilful misconduct of MODL or those for whom it is in law responsible.
2.5 Insurance
Proponents are advised that insurance coverage obligations will be as follows:
The Proponent shall, at all times during the Term of this Agreement and at its sole cost and expense procure, maintain, pay for and keep in full force and effect the following insurance at minimum:
a) Commercial General Liability coverage with MODL as Additional Insured, including Cross Liability and Severability of Interest Clause, Non-Owned Auto Liability coverage, and 30 days advance written notice of policy cancellation or change;
b) Automobile Liability with 15 days advance written notice of policy cancellation or change; and,
All insurance required to be maintained by Proponent shall be provided by insurers maintaining a Minimum AM Best “A-“ financial rating, shall be primary with respect to, and not contributing to or in excess of, any other similar or complementary insurance maintained by the Municipality, and shall be placed with such insurers and in such form and with such deductibles as are acceptable to the Municipality, acting reasonably. Any deductible or self-insured retention in such insurance shall be at the sole cost of Proponent.
Before the Commencement Date of the Work, the Proponent shall provide to the Municipality current certificates of insurance or, at the request of the Municipality, a certified copy of the policies, as well as renewal certificates or policies thereafter for the duration of the Agreement, evidencing the required insurance and recording that the Municipality shall receive 15, 30 or 90 days written notice as outline above prior to cancellation, and prior to a material change of coverage detrimental to the Municipality.
Commercial General Liability
Commercial General Liability insurance on an occurrence basis with a minimum limit of $2,000,000 for bodily injury including death, personal injury and property damage including loss of use, and also covering for (a) blanket contractual liability; (b) owners' and contractors' protective liability; (c) broad form property damage; (d) tenant's legal liability; (e) non-owned
8
automobile liability; (f) contingent employer's liability and (g) products and completed operations liability. Excess or umbrella insurance may be used to achieve the required insured limits.
All Commercial General Liability policies SHALL NOT contain an absolute pollution exclusion.
Automobile Insurance
The Proponent shall take out and keep in force Automobile Insurance (Nova Scotia SPF #1) covering all owned, leased and operated vehicles with a limit of liability not less than $2,000,000 per occurrence for Third Party Liability, in respect of the use or operation of vehicles owned, operated or leased by the Proponent.
2.6 Supplier Information Form
Services shall commence upon the Contractor signing of the Supplier Information Form (Appendix C). Payment shall be made upon successful supply, delivery, installation, training and turnover of the specified furniture.
2.7 Notices
Any notices required or permitted to be given by the Contractor or MODL shall be deemed to have been properly and effectively given if delivered personally, sent by e-mail or sent by registered prepaid mail to the party whom the notice is to be given.
2.8 Changes, Alterations, Amendments
Changes in the terms and conditions of the Contract may be made only by written agreement of the parties.
2.9 Termination
In the event that either party believes that the other materially has breached any obligations under the Contract such party shall notify the breaching party in writing. The breaching party shall have 30 days from the receipt of notice to cure the alleged breach and to notify the non- breaching party in writing that a cure has been effected. If the breach is not cured within the 30 days, the non-breaching party shall have the right to terminate the Contract without further notice.
9
2.10 Assignment
No right of interest in the Contract shall be assigned by either party without the written consent of the other and no delegation owed, or the performance of any obligation by either MODL or the Contractor shall be made without the written consent of the other party.
3.0 RFP Submission Information
3.1 Key Dates
RFP Release Date March 10th, 2020
Deadline for Questions March 20th, 2020
Closing Date March 27th 2020
Estimated Notification Date Early April, 2020
Completion of delivery and installation – all furniture components
July 21st, 2020
3.2 Form of Submission
3.2.1 Submittal Documentation Form
The Proponent must submit an offer with all the mandatory information requested in this RFP. Proponents shall submit Section 5, RFP Submittal Documentation.
3.3 Proposal Submission Instructions
Proposals shall be delivered ONLY to the email addresses specified below. An original, hardcopy document is NOT required.
[email protected] and [email protected]
Electronic Proposals must be submitted by 4:00 pm Atlantic Standard Time, March 27th, 2020. Timely receipt and correct direction of the offers shall be the sole responsibility of the Proponent.
3.4 Enquiries
Proponents shall promptly examine all documents and addenda comprising this RFP and shall report any errors, and seek clarification of apparent errors, ambiguities, or other problems as soon as identified. It is the Proponent’s responsibility to avail themselves of all the necessary information to prepare a compliant proposal in response to this RFP. The Evaluation Committee is under no obligation to seek clarification of a Proponent’s proposal.
10
3.5 Amendments, Withdrawal and Disqualification
After the closing date and time, amendments to a proposal will not be accepted.
In the event that a Proponent wishes to withdraw its Proposal, the Proponent shall immediately notify the Interior Designer by email, before the RFP closing date. Should a proposal be withdrawn, it will be returned to the Proponent after the closing date, and no further consideration will be given to it.
3.6 Costs Related to Solicitation Process
All costs and expenses incurred by the Proponent related to the preparation of the proposal shall be borne by the Proponent. MODL is not liable to pay such costs and expenses or to reimburse or to compensate the Proponent under any circumstance.
MODL shall not be responsible for any costs related to any delays in the RFP, in awarding the agreement, or costs associated with any review or the approval process, or with obtaining any government approvals.
3.7 Conflict of Interest
Proponents must fully disclose, in writing to the Interior Designer, on or before the closing date of the RFP, any circumstances of any possible conflict of interest or what could be perceived as a possible conflict of interest if the Proponent were to become a contracting party pursuant to the RFP. The Evaluation Committee shall review any submissions by Proponents under this provision and may reject any proposals where, in the opinion of the Committee, the Proponent could be in conflict of interest or could be perceived to be in a possible conflict of interest position if the Proponent were to become a contracting party pursuant to this RFP.
3.8 MODL’s Rights
3.8.1 This RFP does not constitute an offer of any nature or kind whatsoever by MODL to any Proponent. MODL reserves the right to accept or reject all proposals, in whole or in part, at the sole discretion of MODL.
3.8.2 Furthermore, MODL reserves the right to:
i. Ask any Proponent to provide proof that they have the necessary management structure, skilled personnel, experience and equipment to perform competently the work identified in this RFP.
ii. Cancel and/or reissue this RFP at any time; MODL will not assume liability for any response preparation costs whatsoever.
iii. Request clarification or supporting data for any point in a Proponent’s proposal. iv. Negotiate with the Proponents subject to the constraints of the mandatory requirements
of this RFP. v. Make changes to this RFP, including substantial changes provided that those changes are
issued by way of a Solicitation Amendment in writing, and is issued prior to the RFP closing
11
date. MODL may do so without incurring any liability whatsoever to any of the Proponents.
vi. Maintain sole ownership of the proposals. All materials submitted by a Proponent in response to any part of this RFP shall become the sole property of MODL without payment or liability for payment.
4.0 Evaluation and Award
4.1 Evaluation Criteria and Process
Proposals will be evaluated on each individual item in response to this RFP. MODL has the right to accept or reject in whole or in part at the sole discretion of MODL.
4.2 Notification, Award and Debriefing
The Interior Designer will provide all rejection and award letters as required by April 10th, 2020.
12
5.0 RFP Submittal Documentation
5.1 Company Information
Request for Proposals: MODL Municipal Services Building. Please submit information as per this table.
Legal Name:
Full Address:
Telephone:
Business (GST) Number:
Name and title of person authorized to sign on behalf of the Proponent (Type or Print)
Signature of person authorized to sign on behalf of the Proponent
Name and title of RFP Contact / Project Manager (Type or Print)
Telephone:
Email:
13
5.2 Addenda
Addenda will be issued by the Interior Designer regarding any changes and answers to questions that may arise during the solicitation period. Completion of this section will ensure that you have received and factored this information into your tender total. Failure to identify addenda issued by the Interior Designer may result in the disqualification of your proposal.
5.3 Aesthetics
Provide the following information by product: (a) Reference item code, (b) Manufacturer, (c) Colour availability and colour samples , and (d) Photo Example
5.4 Company Profile
Provide maximum one (1) page summary of your company. Please include highlights of previous work that relates to the services requested herein. Please provide a WCB clearance letter. The Proponent shall also be responsible for obtaining and providing evidence that any Subcontractor connected with the performance of the professional services agreement are also covered.
5.5 Financial Proposal
Provide unit pricing and total pricing for each commercial furniture type and a breakdown of major components. List any suggestions or deviations from the Product Requirements. Do not include 15% HST. Return a completed version of Appendix A – Furniture Schedule & Standard of Acceptance.
5.6 Supplier Statement
WE: (Supplier Name)
5.6.1 DO HEREBY OFFER to the Municipality of the District of Lunenburg to diligently and faithfully provide the services in accordance with the terms and conditions of the RFP.
5.6.2 AND WE HEREBY AFFFIRM AND CERTIFY that we:
i. Have examined to our satisfaction all conditions affecting the Services. ii. Have carefully studied the RFP, including all addenda.
iii. Have not relied on any information or documents provided by or on behalf of MODL other than the
RFP. iv. Have included the information that was required to be submitted, which information forms an
integral part of the Submittal Documentation.
5.6.3 AND WE HEREBY DECLARE, REPRESENT, WARRANT AND AGREE THAT:
v. The proposal has been executed with full authority and is irrevocable, valid and open to
acceptance by MODL for a period of ninety (90) full days from the Closing Date irrespective of the
acceptance of any other proposal or the issue of a notice or acceptance of another proposal. vi. This proposal is made by the undersigned without any connection, knowledge, and comparison of
figures or arrangements with any other person who might submit a proposal for the same Work and is in all respects fair and without collusion or fraud.
vii. Proposed sub-Supplier (if any) have been given the opportunity to study the RFP.
14
6.0 Appendix A – Furniture Schedule & Standard of Acceptance
This page intentionally left blank.
15
8.0 Appendix B – Location Plans
This page intentionally left blank.
16
9.0 Appendix C - T1204 Supplier Information Form
Supplier Information
Legal name of entity or individual /
Address, including postal code
Phone Number
Fax Number
E-mail address
Check one of the business types
1. Individual 2. Unincorporated business 3. Corporations 4. Partnership
Please fill one of the three boxes
GST-HST Number
Business Number
Individual – Contractor SIN
I certify that I have examined the information above, that it is correct and complete, and fully disclose the
identification of this Contractor.
_________________________________________________
Contractor’s Signature
AREA CODE/ITEM Product Name + Code Dealer Manufacturer Product Description Dimensions Price/Unit Quantity Total Price Notes:
RECEPTION (C‐02) F01
WAITING SEATING
Equal toOfgo studio
Liberty sectional seatingA: 5977‐SF‐NA‐TTBK (armless lounge x4)B: 5900‐OQ‐1S‐TTBK (quarter circle x4)
C: 5977‐SF‐WA‐TTBK (dual arms x2), 5977‐SF‐AL‐TTBK (left arm lounge x2), 5977‐SF‐
AR‐TTBK (right arm lounge x2)
Sectional seating, attached in arrangment indicated (include ganging hardware). SEAT: UpholsteredSEAT FINISH: Mid-range vinylBACK: UpholsteredBACK FINISH: Mid-range fabricLegs: Powdercoated metal
5977‐SF‐NA‐TTBK (armless lounge): 21"W x 26"D x 32"H
5900‐OQ‐1S‐TTBK (quarter circle)26"W x 26"D x 17.5"H
5977‐SF‐WA‐TTBK (dual arms)31"W x 26"D x 32"H
5977‐SF‐AL‐TTBK (left arm lounge)26"W x 26"D x 32"H
5977‐SF‐AR‐TTBK (right arm lounge)26"W x 26"D x 32"H
1 $0.00
Equal toHaworth
Very Seminar Chair with Plastic seat
Stacking chair with arms, 4 legs on glides. SEAT: PlasticSEAT FINISH: StandardBACK: PlasticBACK FINISH: StandardFRAME: Polished chrome ARMS: Polypropylene
23.5"W x 22"D x 33.9"H 29 $0.00
Equal toHaworth
Very Seminar Chair with Upholstered seat
Stacking chair with arms, 4 legs on glides. SEAT: UpholsteredSEAT FINISH: Standard fabricBACK: PlasticBACK FINISH: StandardFRAME: Polished chrome ARMS: Polypropylene
23.5"W x 22"D x 33.9"H 25 $0.00
Equal toHaworth
Very Seminar Chair Cart
Stacking cart on casters (holds 8x chairs)
7 $0.00
COUNCIL CHAMBERS (C‐04) F03
FLIP TOP TABLE (MEDIA)
Equal toSteelcase
Groupwork Flip-Top Table with Cast Legs
Flip‐top table on casters.Top: LaminateLegs: Powdercoated metal
Table top: 72" X 30" Height: 30"
1 $0.00
COUNCIL CHAMBERS (C‐04) x50, Reception (C‐02) x4
F02STACKING CHAIR WITH ARMS
(+ CARTS)
06‐Mar‐20
Product Image
MODL
FURNITURE SCHEDULE
A
B
C
A
AA C
CC
CC
B
BB
4'-4
"14'-9"
AREA CODE/ITEM Product Name + Code Dealer Manufacturer Product Description Dimensions Price/Unit Quantity Total Price Notes:Product Image
COUNCIL CHAMBERS (C‐04) x4, COUNCIL LOUNGE (C‐07) x2, RADIO ROOM (C‐09)
x2
F04CONFERENCE CHAIR
Equal toHaworth
Very Conference Chair
Conference chair with arms, 5 star base with casters, height adjustable, back tilt. SEAT: UpholsteredSEAT FINISH: Standard fabricBACK: PlasticBACK FINISH: StandardBASE FINISH: Polished aluminium ARMS: Polypropylene
25"W x 26.7"D x 36.9"H 8 $0.00
COUNCIL CHAMBERS (C‐04)F05
EXECUTIVE CHAIR (COUNCILLORS)
Equal toHaworth
Lotus High Back Executive Chair
High back chair with arms, 5 star base with casters, height adjustable, back tilt. SEAT/BACK: UpholsteredSEAT/BACK FINISH: Standard fabricBASE FINISH: Polished chromeARMS: Upholstered
25.5"W x 25.5"D x 51.25"H 16 $0.00
BOARDROOM (C‐03)F06
CONFERENCE CHAIR
Equal toHaworth
Very Conference Chair
Conference chair with arms, 5 star base with casters, height adjustable, back tilt. SEAT: UpholsteredSEAT FINISH: Standard fabricBACK: PlasticBACK FINISH: StandardBASE FINISH: Polished aluminium ARMS: Polypropylene
25"W x 26.7"D x 36.9"H 14 $0.00
BOARDROOM (C‐03) x6, COUNCIL CHAMBERS (C‐04) x2
F07FLIP TOP TABLE
Equal toSteelcase
Groupwork Flip-Top Table with Cast Legs
Flip‐top table on casters.Top: LaminateLegs: Powdercoated metal
Table top: 48" X 30" Height: 30"
8 $0.00
OFFICES, OPEN WORKSTATIONSF08
TASK CHAIR 1Refer to product description for
performance specification 57 $0.00
•Fully upholstered, dual curve high back backrest 19”w x 25”h (with adjustable headrest option when required).•Back height adjustment system with air lumbar feature.•Various seat pan size option availability, with soft , supportive foam•Infinite Lock Free Float (rocking feature).•Back angle adjustment (multi‐tilt mechanism.•Forward Tilt Lock.•2.5” Depth Adjustable Seat Slider.•Various pneumatic lift/cylinder sizes starting as low as 15 3/4”H.•Carpet or Urethane (hard surface) caster options.•Available in various finishes/fabrics.•Height and width adjustable armrests, with 360 swivel feature and lateral feature and padded arm caps as per CSA Standard Z412‐17 A.3.2.5.3 Armrest: The length, width, and positioning of the armrests shall allow users to support their forearms properly while sitting close enough to the work surface to perform their tasks and shall not be a source of contact stress.
AREA CODE/ITEM Product Name + Code Dealer Manufacturer Product Description Dimensions Price/Unit Quantity Total Price Notes:Product Image
MEETING ROOMS (01, 05, 46)F09
CONFERENCE CHAIRExisting Chair to be re‐used (total quantity
is 18x) N/A N/A N/A N/A 17 $0.00
MEETING ROOMS (01, 05, 46)F10
MEETING ROOM TABLE
Equal toOfgo studio
My Zone Table
Meeting table with 1x power module (tabletop box with a 20A duplex receptacle and 2x class 2 USB outlets)Top: LaminateLegs: Powdercoated metal
Table top: 72" X 36" Height: 30" 3 $0.00
MAYOR (03)F11
3X PERSON ROUND MEETING TABLE
Equal to Global
Swap Table SWP501
36" DIA. Round meeting table, disc baseTop: LaminateBase: Brushed chrome
36" DIA. x 29"H 1 $0.00
OFFICES x24, MAYOR (03) x3, CAO (04) x2
F12GUEST CHAIR
Equal to Haworth
Maari 4 leg chair
Guest chair with arms, 4 leg base. SEAT: UpholsteredSEAT FINISH: Standard fabricBACK: PlasticBACK FINISH: StandardFRAME: Powdercoated
23"W x 21.5"D x 33"H 29 $0.00
CAO (04)F13
2X PERSON ROUND MEETING TABLE
Equal to Global
Swap Table
30" DIA. Round meeting table, disc baseTop: LaminateBase: Brushed chrome
30" DIA. x 29"H 1 $0.00
AREA CODE/ITEM Product Name + Code Dealer Manufacturer Product Description Dimensions Price/Unit Quantity Total Price Notes:Product Image
STAFF ROOM (21)F14
STOOL
Equal toHaworth
Very Wire Stool Counter Height
Hard shell stool with sled base. Height to suit 3' counter height. SEAT: PlasticSEAT FINISH: StandardBACK: PlasticBACK FINISH: StandardFRAME: Polished chrome
23"W x 23"D x 39"H 8 $0.00
STAFF ROOM (21)F15
LUNCH CHAIR
Equal toHaworth
Very Wire Stacker Chair
Hard shell chair with arms and sled base. SEAT: PlasticSEAT FINISH: StandardBACK: PlasticBACK FINISH: StandardFRAME: Polished chrome ARMS: Polypropylene
21.8"W x 23.3"D x 30.6"H 4 $0.00
STAFF MEETING ROOM 1 (41)F21
STAFF MEETING CHAIR
Equal toHaworth
Very Conference Chair
Conference chair with arms, 5 star base with casters, height adjustable, back tilt. SEAT: UpholsteredSEAT FINISH: Standard fabricBACK: PlasticBACK FINISH: StandardBASE FINISH: Polished aluminium ARMS: Polypropylene
25"W x 26.7"D x 36.9"H 10 $0.00
STAFF MEETING ROOM 1 (41)F22
STAFF MEETING TABLE
Equal toOfgo studio
My Zone Table
Meeting table with 2x power modules (tabletop box with a 20A duplex receptacle and 2x class 2 USB outlets) and cable snakes to suitTOP: LaminateLEGS: Powdercoated metal
Table top: 132" X 48" Height: 30" 1 $0.00
OFFICES (2x FOR EACH FINANCE OFFICE), OPEN WORKSTATIONS, PLAN MULTI OFF
(36), CO‐OP STUDENTS (48)
F23MOBILE PEDESTAL
TO FIT UNDER STANDARD DESK HEIGHT
Equal toHaworth
X‐Series Mobile Pedestal with Cushion top
Metal constuction mobile pedestal with cushion top, integrated finger pulls, 2x drawers (file drawer to bottom)METAL FINISH: PowdercoatedCUSHION TOP: Mid‐range fabric
15"W x 23"D x 22"H 58 $0.00
AREA CODE/ITEM Product Name + Code Dealer Manufacturer Product Description Dimensions Price/Unit Quantity Total Price Notes:Product Image
PLAN MULTI OFF (36)F24
PLANNING TABLE
Equal toOfgo studio
My Zone Table
Planning table Top: LaminateLegs: Powdercoated metal
Table top: 72" X 36" Height: 30" 1 $0.00
$0.00
WORKSTATIONSAREA CODE/ITEM Product Name + Code Dealer Manufacturer Product Description DIMENSIONS Price/Unit Quantity Total Price Notes:
OFFICES (08, 09, 10, 11, 22, 23, 24, 28, 29, 30, 31, 32 ,33, 43, 44, 45)
TYPE 1A (100 SF)Refer to plans for description Refer to plans for dimensions
16 $0.00
REFER BELOW LINE ITEM FOR ELECTRIC SIT‐TO‐STAND DESK & KEYBOARD TRAY PERFORMANCE
SPECIFICATIONS
ADMIN SUPPORT 02 TYPE 1B (ADMIN)Refer to plans for description Refer to plans for dimensions
2 $0.00
REFER BELOW LINE ITEM FOR ELECTRIC SIT‐TO‐STAND DESK & KEYBOARD TRAY PERFORMANCE
SPECIFICATIONS
OFFICES ( 06, 07, 13, 14, 15, 16, 26, 27) TYPE 2 (120 SF)Refer to plans for description Refer to plans for dimensions
8 $0.00
REFER BELOW LINE ITEM FOR ELECTRIC SIT‐TO‐STAND DESK & KEYBOARD TRAY PERFORMANCE
SPECIFICATIONS
OFFICES (03, 04) TYPE 3 (145 SF)Refer to plans for description Refer to plans for dimensions
2 $0.00
REFER BELOW LINE ITEM FOR ELECTRIC SIT‐TO‐STAND DESK & KEYBOARD TRAY PERFORMANCE
SPECIFICATIONS
6x POD (RECEP WORK STATIONS 35)Refer to plans for description Refer to plans for dimensions
1 $0.00
REFER BELOW LINE ITEM FOR ELECTRIC SIT‐TO‐STAND DESK & KEYBOARD TRAY PERFORMANCE
SPECIFICATIONS
4x POD (WORKSTATIONS 42)Refer to plans for description Refer to plans for dimensions
2 $0.00
REFER BELOW LINE ITEM FOR ELECTRIC SIT‐TO‐STAND DESK & KEYBOARD TRAY PERFORMANCE
SPECIFICATIONS
SINGLE (OPEN AREA 12)Refer to plans for description Refer to plans for dimensions
3 $0.00
REFER BELOW LINE ITEM FOR ELECTRIC SIT‐TO‐STAND DESK & KEYBOARD TRAY PERFORMANCE
SPECIFICATIONS
STUDENT DESKS (CO‐OP STUDENTS 48)Refer to plans for description Refer to plans for dimensions
4 $0.00
REFER BELOW LINE ITEM FOR ELECTRIC SIT‐TO‐STAND DESK & KEYBOARD TRAY PERFORMANCE
SPECIFICATIONS
THROUGHOUT ELECTRIC SIT‐TO‐STAND DESKSRefer to product description for
performance specification 49 $0.00
THROUGHOUT KEYBOARD TRAYSRefer to product description for
performance specification 49 $0.00
$0.00
$0.00
OPEN WORK AREAS
Total Price
Product Image
Sub‐total price
Sub‐total price
• Height and tilt adjustable keyboard platform, measuring 27”w x 11”d (with no palm support)• Attached to a lever‐free, low profile mechanism• The keyboard mechanism may have to be cut or a mounting kit installed in order to install thekeyboard tray around the support bar of the electric base procured.
• Adjustable in various widths and depths to accommodate work surface size ranges.• Sturdy, stable frame that can hold up to 300 lbs; middle support for stability.•Quiet motor and quick transition between working heights.• Easy use touch pad preferably with set height feature.• Available in various finishes.• Adjust in height range from 22.6”H from the floor to 48”H from the floor as per CSA Standard forHeight Adjustable Work Surfaces ‐ A.3.3.3
FURNITURE SELECTIONS REV 06Municipality of The District of LunenburgMunicipal Building
UP
WORKSTATIONS42
OPEN AREA12
ENG. DIR13
ENG. STAFF 314
SHARED MTG15
ED DIR.16
CUSTODIAL17
VEST.18
U W/C19
ADD MEET SPACE20
STAFF ROOM21
FIN STAFF 122
FIN STAFF 223
FIN DIR. 224
VEST.25
FIN FIR. 126
PLAN DIR.27
PLAN STAFF 128
PLAN STAFF 229
REC STAFF 330
ADMIN DIR.06
D. CAO07
ADMIN STAFF 108
ADMIN STAFF 209
ADMIN STAFF 310
ADMIN STAFF 411
STAFF MEET RM 141
STAFF MEET RM 248
DOCCENTRE
38FINANCE STOR.
37
ENG STAFF 143
ENG STAFF 244
ED STAFF 245
ED STAFF 146
STORAGE47
STORAGE51
ELEC.50
COMM.39
U W/C 40
CORRIDOR 55
CORRIDOR53
CORRIDOR54
REC STAFF 330
REC STAFF 231
REC STAFF 132
REC DIR.33
BOARDROOMC-03
COUNCIL CHAMBERSC-04
CL.C-13
VEST.C-06
COUNCIL LOUNGEC-07
RADIO RMC-09
STORAGE RMC-10
WCWC-01
WCWC-02
WCWC-03
WCWC-04
WCWC-05
WCWC-06 VEST.
C-01
RECEPTIONC-02
MTG ROOM01
MTG ROOM03
CAO04
ADMIN SUPPORT02 SHARED MTG
05ADMIN DIR.
06D. CAO
07
DOCCENTRE
38
FINANCE STOR.37
PLAN MULTI OFF36
RECEPTION WORKSTATIONS
35
FAMILY WCC-12
STORAGE34
U W/C 52
CORRIDOR55
GN W/CC-11
U W/CC-08
O.W. CL.C-14
AVC-05 KEYPLAN
OVERALL FURNITURE PLAN PART 1
F02
F03 F02F02
F02F02
F02F02
F02F02
F02F02
F02F02
F02F02
F02
F02F02
F02F02
F02F02
F02
F02F02
F02F02
F02
F02
F02
F02F02
F02
F02F02
F02
F02
F02
F02
F02F02
F02
F02F02
F02
F02
F04
F04
F04
F04
F05
F05
F05
F05
F05
F05
F05
F05
F05
F05 F05 F05F05
F05
F05
F05
F06
F06
F06
F06
F06
F06
F06F06
F06F06
F06
F06
F06
F06
F07
F07
F07F07
F07
F07
F08 F08
F08 F08
F08 F08
F08
F08
F09 F09
F09F09
F09 F09
F10
F08 F08
F11 F13
F12F12
F12
F12
F12
F08 F08 F08
F12 F12 F12
11 12 13 14 15 16 17
A
B
C
D
E
F
G
H
I
J
10
8y*
8x
9
8
6
5
4
3
2
1
M
L
K
Lx
Ly
Kx
Ky
Mx
7
7x
7y
E01
E19 E01
E01
E01
E01
E01
E01
E01
E01
E01
E01
E01
E01
E01
E01
E01
E01
E01
E01
E01
E01
E01
E01
E01
E03
E04
E05
E08
E11
E12
E13
E14
F12
F08
E18
F12
F08
E07
REC STAFF 330
REC STAFF 231
REC STAFF 132
REC DIR.33
BOARDROOMC-03
COUNCIL CHAMBERSC-04
CL.C-13
VEST.C-06
COUNCIL LOUNGEC-07
RADIO RMC-09
STORAGE RMC-10
WCWC-01
WCWC-02
WCWC-03
WCWC-04
WCWC-05
WCWC-06
VEST.C-01
RECEPTIONC-02
MTG ROOM01
MAYOR03
CAO04
ADMIN SUPPORT02
SHARED MTG05
ADMIN DIR.06
D. CAO07
DOCCENTRE
38
FINANCE STOR.37PLAN MULTI OFF
36
RECEP. WORKSTATIONS
35
STORAGE34
U W/C 52
CORRIDOR55
GN W/CC-11
U W/CC-08
O.W. CL.C-14
F23
F08
F08F23
F24
F23
F17
F18
F18
F25
F25
F23
E06
E16 ONSHELFABOVE
F04
F04
F04
F04F07
F07
F02
F02
F02F02
FAMILY WCC-12
05
I-702
01
I-702
04
I-702
03
I-702
02
I-702
05
I-701
AVC-05
DUAL
DUAL
F12
F01
F08
F08
F08
F08
F02
F02
F02
F02
F08F08
F08F09F09
F09
F09
F09F10
F09
FURNITURE SELECTIONS REV 06Municipality of The District of LunenburgMunicipal Building
UP
WORKSTATIONS42
OPEN AREA12
ENG. DIR13
ENG. STAFF 314
SHARED MTG15
ED DIR.16
CUSTODIAL17
VEST.18
U W/C19
ADD MEET SPACE20
STAFF ROOM21
FIN STAFF 122
FIN STAFF 223
FIN DIR. 224
VEST.25
FIN FIR. 126
PLAN DIR.27
PLAN STAFF 128
PLAN STAFF 229
REC STAFF 330
ADMIN DIR.06
D. CAO07
ADMIN STAFF 108
ADMIN STAFF 209
ADMIN STAFF 310
ADMIN STAFF 411
STAFF MEET RM 141
STAFF MEET RM 248
DOCCENTRE
38FINANCE STOR.
37
ENG STAFF 143
ENG STAFF 244
ED STAFF 245
ED STAFF 146
STORAGE47
STORAGE51
ELEC.50
COMM.39
U W/C 40
CORRIDOR 55
CORRIDOR53
CORRIDOR54
REC STAFF 330
REC STAFF 231
REC STAFF 132
REC DIR.33
BOARDROOMC-03
COUNCIL CHAMBERSC-04
CL.C-13
VEST.C-06
COUNCIL LOUNGEC-07
RADIO RMC-09
STORAGE RMC-10
WCWC-01
WCWC-02
WCWC-03
WCWC-04
WCWC-05
WCWC-06 VEST.
C-01
RECEPTIONC-02
MTG ROOM01
MTG ROOM03
CAO04
ADMIN SUPPORT02 SHARED MTG
05ADMIN DIR.
06D. CAO
07
DOCCENTRE
38
FINANCE STOR.37
PLAN MULTI OFF36
RECEPTION WORKSTATIONS
35
FAMILY WCC-12
STORAGE34
U W/C 52
CORRIDOR55
GN W/CC-11
U W/CC-08
O.W. CL.C-14
AVC-05 KEYPLAN
OVERALL FURNITURE PLAN PART 2
F08 F08 F08 F08 F08
F08F08F08
F08 F08 F08
F08 F08
F08 F08
F08
F08 F08
F08
F08F08F08
F09
F09F09
F09 F09F10
F12 F12
F12F12F12
F12 F12
F14
F14
F14
F14
F14
F14
F14
F14
F15 F15 F15 F15 F16
F16
F17
F18
F18
F19
F20
E01
E02
E03
F21 F21 F21 F21
F21 F21 F21 F21
F21 F21F22
F12
F08
F12
F08
F12
04
I-70101
I-701
02
I-70103
I-701
UP
15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
A
B
C
D
E
F
Ex
Fx
Fy
G
H
Hx
I
J
E03
E04
E05
E08
E12
E13
E14
E15
F12 F12
F12
F08
F12
F08
F12
F12F12 F12
F12
F08
E01 E01 E01
E01
E01E01 E01 E01
E01 E01 E01
E01
E01
E01
WORKSTATIONS42
OPEN AREA12
ENG. DIR13
ENG. STAFF 314
ED DIR.16
CUSTODIAL17
VEST.18
U W/C19
ADD MEET SPACE20
STAFF ROOM21
FIN STAFF 122
FIN STAFF 223
FIN DIR. 224
VEST.25
FIN FIR. 126
PLAN DIR.27
PLAN STAFF 128
PLAN STAFF 229
REC STAFF 330
REC STAFF 231
ADMIN DIR.06
D. CAO07
ADMIN STAFF 108
ADMIN STAFF 209
ADMIN STAFF 310
ADMIN STAFF 411
STAFF MEET RM 141
FINANCE STOR.37
ENG STAFF 143
ENG STAFF 244
ED STAFF 245
MEETING46
STORAGE47
STORAGE51
ELEC.50
COMM.39
U W/C 40
CORRIDOR 55
CORRIDOR53
CORRIDOR54
E11
E18
E07
DOCCENTRE
38
E06
E16 ONSHELFABOVE
02
I-705
01
I-705
F08 F08F08
1 1
F08 F08
F08F08 F23F23
F23 F23
CO-OP STUDENTS48
NEWPR.
7'-7
1/4
"
F08
F12
OFFICE15
FURNITURE SELECTIONS REV 06Municipality of The District of LunenburgMunicipal Building
UP
WORKSTATIONS42
OPEN AREA12
ENG. DIR13
ENG. STAFF 314
SHARED MTG15
ED DIR.16
CUSTODIAL17
VEST.18
U W/C19
ADD MEET SPACE20
STAFF ROOM21
FIN STAFF 122
FIN STAFF 223
FIN DIR. 224
VEST.25
FIN FIR. 126
PLAN DIR.27
PLAN STAFF 128
PLAN STAFF 229
REC STAFF 330
ADMIN DIR.06
D. CAO07
ADMIN STAFF 108
ADMIN STAFF 209
ADMIN STAFF 310
ADMIN STAFF 411
STAFF MEET RM 141
STAFF MEET RM 248
DOCCENTRE
38FINANCE STOR.
37
ENG STAFF 143
ENG STAFF 244
ED STAFF 245
ED STAFF 146
STORAGE47
STORAGE51
ELEC.50
COMM.39
U W/C 40
CORRIDOR 55
CORRIDOR53
CORRIDOR54
REC STAFF 330
REC STAFF 231
REC STAFF 132
REC DIR.33
BOARDROOMC-03
COUNCIL CHAMBERSC-04
CL.C-13
VEST.C-06
COUNCIL LOUNGEC-07
RADIO RMC-09
STORAGE RMC-10
WCWC-01
WCWC-02
WCWC-03
WCWC-04
WCWC-05
WCWC-06 VEST.
C-01
RECEPTIONC-02
MTG ROOM01
MTG ROOM03
CAO04
ADMIN SUPPORT02 SHARED MTG
05ADMIN DIR.
06D. CAO
07
DOCCENTRE
38
FINANCE STOR.37
PLAN MULTI OFF36
RECEPTION WORKSTATIONS
35
FAMILY WCC-12
STORAGE34
U W/C 52
CORRIDOR55
GN W/CC-11
U W/CC-08
O.W. CL.C-14
AVC-05 KEYPLAN
OFFICE TYPE 3 (145 SF)
F11 / F13 - MEETING TABLEF12 - GUEST CHAIR
6'-0"
7'-0
"
2'-6
"
2'-0"
1'-6
"
STORAGE TOWER 60 "H.
WHITEBOARD SURFACE
TACKABLE SURFACE
GENERAL NOTES:BASE FED PANELS48" FABRIC PANELS C/W12" HIGH GLASS STACKERLAMINATE WORKSURFACESMETAL STORAGE TOWER
36/60 36/60
36/6
048
/60
36/60 36/60
42/6
0GROMMETLOCATION TOBEDETERMINEDON SITE
LOW STORAGE W/CUSHION TOP 22"H,DRAWERS UNDER
WALL MOUNTEDCLOSED UPPERSTORAGE FROM54" AFF TO 72" AFF
MODESTY PANEL
TACKABLE SURFACE
5'-6" 4'-0"
6'-0"
2'-6
"3'
-0"
1'-6
"
F08
F11 / F13
F12
F12
F12
F23
ELECTRIC SIT-TO-STANDWORK SURFACE BASE
FIXED WORK SURFACE,STANDARD DESK HEIGHT
5'-0"
6'-0"
2'-6
"5'
-0"
FIXED WORK SURFACE,STANDARD DESK HEIGHT
1'-6
"
WALL MOUNTEDCLOSED UPPERSTORAGE FROM54" AFF TO 72" AFF
MODESTY PANEL
TACKABLE SURFACE
ELECTRIC SIT-TO-STANDWORK SURFACE BASE
FIXED WORKSURFACE,STANDARD DESKHEIGHT
F12
3'-0
"
1'-0"
BOOKCASEW/ 5X ADJ.SHELVES,72"H.
F23
F23
F12
BOOKCASEW/ 5X ADJ.SHELVES,72"H.
MODESTY PANEL
ELECTRIC SIT-TO-STANDWORK SURFACE BASE
6'-0"
2'-6
"3'
-0"
1'-0"
1'-0
"
1'-0"
2'-0"
2'-0"
1'-0"
3'-0
"
WALL MOUNTEDCLOSED UPPERSTORAGE FROM54" AFF TO 72" AFF
TACKABLE SURFACE
FIXED WORK SURFACE,STANDARD DESKHEIGHT
F23
F08
F08
F08
GROMMET LOCATION TO BEDETERMINED ON SITEGROMMET LOCATION
TO BE DETERMINEDON SITE
GROMMET LOCATION TO BEDETERMINED ON SITE
ELECTRIC SIT-TO-STANDWORK SURFACE BASE
FIXED WORK SURFACE,STANDARD DESK HEIGHT
GENERAL NOTES:LAMINATE WORKSURFACESAND STORAGE UNITS
GENERAL NOTES:LAMINATE WORKSURFACESAND STORAGE UNITS
GENERAL NOTES:LAMINATE WORKSURFACESAND STORAGE UNITS
NOTE: REFER TO SCHEDULE FOR ADDITIONAL DETAILSREFER OVERALL FURNITURE PLANS FOR OFFICE ORIENTATION (ALLOW TO MIRROR TO SUIT)
F23 - MOBILE PEDESTAL
TYPICAL 145 SF OFFICE
FURNITURE SELECTIONS REV 06Municipality of The District of LunenburgMunicipal Building
UP
WORKSTATIONS42
OPEN AREA12
ENG. DIR13
ENG. STAFF 314
SHARED MTG15
ED DIR.16
CUSTODIAL17
VEST.18
U W/C19
ADD MEET SPACE20
STAFF ROOM21
FIN STAFF 122
FIN STAFF 223
FIN DIR. 224
VEST.25
FIN FIR. 126
PLAN DIR.27
PLAN STAFF 128
PLAN STAFF 229
REC STAFF 330
ADMIN DIR.06
D. CAO07
ADMIN STAFF 108
ADMIN STAFF 209
ADMIN STAFF 310
ADMIN STAFF 411
STAFF MEET RM 141
STAFF MEET RM 248
DOCCENTRE
38FINANCE STOR.
37
ENG STAFF 143
ENG STAFF 244
ED STAFF 245
ED STAFF 146
STORAGE47
STORAGE51
ELEC.50
COMM.39
U W/C 40
CORRIDOR 55
CORRIDOR53
CORRIDOR54
REC STAFF 330
REC STAFF 231
REC STAFF 132
REC DIR.33
BOARDROOMC-03
COUNCIL CHAMBERSC-04
CL.C-13
VEST.C-06
COUNCIL LOUNGEC-07
RADIO RMC-09
STORAGE RMC-10
WCWC-01
WCWC-02
WCWC-03
WCWC-04
WCWC-05
WCWC-06 VEST.
C-01
RECEPTIONC-02
MTG ROOM01
MTG ROOM03
CAO04
ADMIN SUPPORT02 SHARED MTG
05ADMIN DIR.
06D. CAO
07
DOCCENTRE
38
FINANCE STOR.37
PLAN MULTI OFF36
RECEPTION WORKSTATIONS
35
FAMILY WCC-12
STORAGE34
U W/C 52
CORRIDOR55
GN W/CC-11
U W/CC-08
O.W. CL.C-14
AVC-05 KEYPLAN
6'-0"
7'-0
"
2'-6
"
2'-0"
1'-6
"
STORAGE TOWER 60 "H.
WHITEBOARD SURFACE
TACKABLE SURFACE
GENERAL NOTES:BASE FED PANELS48" FABRIC PANELS C/W12" HIGH GLASS STACKERLAMINATE WORKSURFACESMETAL STORAGE TOWER
36/60 36/60
36/6
048
/60
36/60 36/60
42/6
0GROMMETLOCATION TOBEDETERMINEDON SITE
LOW STORAGE W/CUSHION TOP 22"H,DRAWERS UNDER
WALL MOUNTEDCLOSED UPPERSTORAGE FROM54" AFF TO 72" AFF
MODESTY PANEL
TACKABLE SURFACE
5'-6" 4'-0"
6'-0"
2'-6
"3'
-0"
1'-6
"
F08
F11 / F13
F12
F12
F12
F23
ELECTRIC SIT-TO-STANDWORK SURFACE BASE
FIXED WORK SURFACE,STANDARD DESK HEIGHT
5'-0"
6'-0"
2'-6
"5'
-0"
FIXED WORK SURFACE,STANDARD DESK HEIGHT
1'-6
"
WALL MOUNTEDCLOSED UPPERSTORAGE FROM54" AFF TO 72" AFF
MODESTY PANEL
TACKABLE SURFACE
ELECTRIC SIT-TO-STANDWORK SURFACE BASE
FIXED WORKSURFACE,STANDARD DESKHEIGHT
F12
3'-0
"
1'-0"
BOOKCASEW/ 5X ADJ.SHELVES,72"H.
F23
F23
F12
BOOKCASEW/ 5X ADJ.SHELVES,72"H.
MODESTY PANEL
ELECTRIC SIT-TO-STANDWORK SURFACE BASE
6'-0"
2'-6
"3'
-0"
1'-0"
1'-0
"
1'-0"
2'-0"
2'-0"
1'-0"
3'-0
"
WALL MOUNTEDCLOSED UPPERSTORAGE FROM54" AFF TO 72" AFF
TACKABLE SURFACE
FIXED WORK SURFACE,STANDARD DESKHEIGHT
F23
F08
F08
F08
GROMMET LOCATION TO BEDETERMINED ON SITEGROMMET LOCATION
TO BE DETERMINEDON SITE
GROMMET LOCATION TO BEDETERMINED ON SITE
ELECTRIC SIT-TO-STANDWORK SURFACE BASE
FIXED WORK SURFACE,STANDARD DESK HEIGHT
GENERAL NOTES:LAMINATE WORKSURFACESAND STORAGE UNITS
GENERAL NOTES:LAMINATE WORKSURFACESAND STORAGE UNITS
GENERAL NOTES:LAMINATE WORKSURFACESAND STORAGE UNITS
F12 - GUEST CHAIR F23 - MOBILE PEDESTAL
OFFICE TYPE 2 (120 SF)
NOTE: REFER TO SCHEDULE FOR ADDITIONAL DETAILSREFER OVERALL FURNITURE PLANS FOR OFFICE ORIENTATION (ALLOW TO MIRROR TO SUIT)
TYPICAL 120 SF OFFICE
FURNITURE SELECTIONS REV 06Municipality of The District of LunenburgMunicipal Building
UP
WORKSTATIONS42
OPEN AREA12
ENG. DIR13
ENG. STAFF 314
SHARED MTG15
ED DIR.16
CUSTODIAL17
VEST.18
U W/C19
ADD MEET SPACE20
STAFF ROOM21
FIN STAFF 122
FIN STAFF 223
FIN DIR. 224
VEST.25
FIN FIR. 126
PLAN DIR.27
PLAN STAFF 128
PLAN STAFF 229
REC STAFF 330
ADMIN DIR.06
D. CAO07
ADMIN STAFF 108
ADMIN STAFF 209
ADMIN STAFF 310
ADMIN STAFF 411
STAFF MEET RM 141
STAFF MEET RM 248
DOCCENTRE
38FINANCE STOR.
37
ENG STAFF 143
ENG STAFF 244
ED STAFF 245
ED STAFF 146
STORAGE47
STORAGE51
ELEC.50
COMM.39
U W/C 40
CORRIDOR 55
CORRIDOR53
CORRIDOR54
REC STAFF 330
REC STAFF 231
REC STAFF 132
REC DIR.33
BOARDROOMC-03
COUNCIL CHAMBERSC-04
CL.C-13
VEST.C-06
COUNCIL LOUNGEC-07
RADIO RMC-09
STORAGE RMC-10
WCWC-01
WCWC-02
WCWC-03
WCWC-04
WCWC-05
WCWC-06 VEST.
C-01
RECEPTIONC-02
MTG ROOM01
MTG ROOM03
CAO04
ADMIN SUPPORT02 SHARED MTG
05ADMIN DIR.
06D. CAO
07
DOCCENTRE
38
FINANCE STOR.37
PLAN MULTI OFF36
RECEPTION WORKSTATIONS
35
FAMILY WCC-12
STORAGE34
U W/C 52
CORRIDOR55
GN W/CC-11
U W/CC-08
O.W. CL.C-14
AVC-05 KEYPLAN
6'-0"
7'-0
"
2'-6
"
2'-0"
1'-6
"
STORAGE TOWER 60 "H.
WHITEBOARD SURFACE
TACKABLE SURFACE
GENERAL NOTES:BASE FED PANELS48" FABRIC PANELS C/W12" HIGH GLASS STACKERLAMINATE WORKSURFACESMETAL STORAGE TOWER
36/60 36/60
36/6
048
/60
36/60 36/60
42/6
0GROMMETLOCATION TOBEDETERMINEDON SITE
LOW STORAGE W/CUSHION TOP 22"H,DRAWERS UNDER
WALL MOUNTEDCLOSED UPPERSTORAGE FROM54" AFF TO 72" AFF
MODESTY PANEL
TACKABLE SURFACE
5'-6" 4'-0"
6'-0"
2'-6
"3'
-0"
1'-6
"
F08
F11 / F13
F12
F12
F12
F23
ELECTRIC SIT-TO-STANDWORK SURFACE BASE
FIXED WORK SURFACE,STANDARD DESK HEIGHT
5'-0"
6'-0"
2'-6
"5'
-0"
FIXED WORK SURFACE,STANDARD DESK HEIGHT
1'-6
"
WALL MOUNTEDCLOSED UPPERSTORAGE FROM54" AFF TO 72" AFF
MODESTY PANEL
TACKABLE SURFACE
ELECTRIC SIT-TO-STANDWORK SURFACE BASE
FIXED WORKSURFACE,STANDARD DESKHEIGHT
F12
3'-0
"
1'-0"
BOOKCASEW/ 5X ADJ.SHELVES,72"H.
F23
F23
F12
BOOKCASEW/ 5X ADJ.SHELVES,72"H.
MODESTY PANEL
ELECTRIC SIT-TO-STANDWORK SURFACE BASE
6'-0"
2'-6
"3'
-0"
1'-0"
1'-0
"
1'-0"
2'-0"
2'-0"
1'-0"
3'-0
"
WALL MOUNTEDCLOSED UPPERSTORAGE FROM54" AFF TO 72" AFF
TACKABLE SURFACE
FIXED WORK SURFACE,STANDARD DESKHEIGHT
F23
F08
F08
F08
GROMMET LOCATION TO BEDETERMINED ON SITEGROMMET LOCATION
TO BE DETERMINEDON SITE
GROMMET LOCATION TO BEDETERMINED ON SITE
ELECTRIC SIT-TO-STANDWORK SURFACE BASE
FIXED WORK SURFACE,STANDARD DESK HEIGHT
GENERAL NOTES:LAMINATE WORKSURFACESAND STORAGE UNITS
GENERAL NOTES:LAMINATE WORKSURFACESAND STORAGE UNITS
GENERAL NOTES:LAMINATE WORKSURFACESAND STORAGE UNITS
OFFICE TYPE 1A (100 SF) & 1B (ADMIN)
F12 - GUEST CHAIR
F23 - MOBILE PEDESTAL
ADMIN SUPPORT02
F23
MODESTY PANEL
ELECTRIC SIT-TO-STANDWORK SURFACE BASE
6'-0"
WALL MOUNTEDCLOSED UPPERSTORAGE FROM54" AFF TO 72" AFF
TACKABLE SURFACE
FIXED WORK SURFACE,STANDARD DESKHEIGHT
F08
GROMMET LOCATION TO BEDETERMINED ON SITE
GENERAL NOTES:LAMINATEWORKSURFACESAND STORAGEUNITS
LAMINATETRANSACTION TOP
1'-6"
5'-0
"
OFFICE TYPE 1A: TYPICAL 100 SF OFFICE
OFFICE TYPE 1B: TYPICAL ADMIN
NOTE: REFER TO SCHEDULE FOR ADDITIONAL DETAILSREFER OVERALL FURNITURE PLANS FOR OFFICE ORIENTATION (ALLOW TO MIRROR TO SUIT)
FURNITURE SELECTIONS REV 06Municipality of The District of LunenburgMunicipal Building
UP
WORKSTATIONS42
OPEN AREA12
ENG. DIR13
ENG. STAFF 314
SHARED MTG15
ED DIR.16
CUSTODIAL17
VEST.18
U W/C19
ADD MEET SPACE20
STAFF ROOM21
FIN STAFF 122
FIN STAFF 223
FIN DIR. 224
VEST.25
FIN FIR. 126
PLAN DIR.27
PLAN STAFF 128
PLAN STAFF 229
REC STAFF 330
ADMIN DIR.06
D. CAO07
ADMIN STAFF 108
ADMIN STAFF 209
ADMIN STAFF 310
ADMIN STAFF 411
STAFF MEET RM 141
STAFF MEET RM 248
DOCCENTRE
38FINANCE STOR.
37
ENG STAFF 143
ENG STAFF 244
ED STAFF 245
ED STAFF 146
STORAGE47
STORAGE51
ELEC.50
COMM.39
U W/C 40
CORRIDOR 55
CORRIDOR53
CORRIDOR54
REC STAFF 330
REC STAFF 231
REC STAFF 132
REC DIR.33
BOARDROOMC-03
COUNCIL CHAMBERSC-04
CL.C-13
VEST.C-06
COUNCIL LOUNGEC-07
RADIO RMC-09
STORAGE RMC-10
WCWC-01
WCWC-02
WCWC-03
WCWC-04
WCWC-05
WCWC-06 VEST.
C-01
RECEPTIONC-02
MTG ROOM01
MTG ROOM03
CAO04
ADMIN SUPPORT02 SHARED MTG
05ADMIN DIR.
06D. CAO
07
DOCCENTRE
38
FINANCE STOR.37
PLAN MULTI OFF36
RECEPTION WORKSTATIONS
35
FAMILY WCC-12
STORAGE34
U W/C 52
CORRIDOR55
GN W/CC-11
U W/CC-08
O.W. CL.C-14
AVC-05 KEYPLAN
LAMINATETRANSACTIONTOP MOUNTEDTO PANEL
1'-0"
1'-0
"
4'-6"
LAMINATETRANSACTION TOPMOUNTED TO PANEL
RECEPTION WORKSTATIONS
35
OPEN AREA12
WORKSTATIONS42
3'-6
"
1'-0"
3'-0
"
3'-0
"
1'-0"
72" H. BOOKCASE 72" H. BOOKCASE
RECEPTIONC-02
F08
F08
F08
F08
F02
F02
F02
F02
RECEPTIONCOUNTER NOTINCLUDED INFURNITURE SCOPE
OPEN WORK AREAS
TYPICAL WORKSTATION
6'-0"
7'-0
"
2'-6
"
2'-0"
1'-6
"
STORAGE TOWER 60 "H.
WHITEBOARD SURFACE
TACKABLE SURFACE
GENERAL NOTES:BASE FED PANELS48" FABRIC PANELS C/W12" HIGH GLASS STACKERLAMINATE WORKSURFACESMETAL STORAGE TOWER
36/60 36/60
36/6
048
/60
36/60 36/60
42/6
0GROMMETLOCATION TOBEDETERMINEDON SITE
LOW STORAGE W/CUSHION TOP 22"H,DRAWERS UNDER
WALL MOUNTEDCLOSED UPPERSTORAGE FROM54" AFF TO 72" AFF
MODESTY PANEL
TACKABLE SURFACE
5'-6" 4'-0"
6'-0"
2'-6
"3'
-0"
1'-6
"
F08
F11 / F13
F12
F12
F12
F23
ELECTRIC SIT-TO-STANDWORK SURFACE BASE
FIXED WORK SURFACE,STANDARD DESK HEIGHT
5'-0"
6'-0"
2'-6
"5'
-0"
FIXED WORK SURFACE,STANDARD DESK HEIGHT
1'-6
"
WALL MOUNTEDCLOSED UPPERSTORAGE FROM54" AFF TO 72" AFF
MODESTY PANEL
TACKABLE SURFACE
ELECTRIC SIT-TO-STANDWORK SURFACE BASE
FIXED WORKSURFACE,STANDARD DESKHEIGHT
F12
3'-0
"
1'-0"
BOOKCASEW/ 5X ADJ.SHELVES,72"H.
F23
F23
F12
BOOKCASEW/ 5X ADJ.SHELVES,72"H.
MODESTY PANEL
ELECTRIC SIT-TO-STANDWORK SURFACE BASE
6'-0"
2'-6
"3'
-0"
1'-0"
1'-0
"
1'-0"
2'-0"
2'-0"
1'-0"
3'-0
"
WALL MOUNTEDCLOSED UPPERSTORAGE FROM54" AFF TO 72" AFF
TACKABLE SURFACE
FIXED WORK SURFACE,STANDARD DESKHEIGHT
F23
F08
F08
F08
GROMMET LOCATION TO BEDETERMINED ON SITEGROMMET LOCATION
TO BE DETERMINEDON SITE
GROMMET LOCATION TO BEDETERMINED ON SITE
ELECTRIC SIT-TO-STANDWORK SURFACE BASE
FIXED WORK SURFACE,STANDARD DESK HEIGHT
GENERAL NOTES:LAMINATE WORKSURFACESAND STORAGE UNITS
GENERAL NOTES:LAMINATE WORKSURFACESAND STORAGE UNITS
GENERAL NOTES:LAMINATE WORKSURFACESAND STORAGE UNITS
NOTE: REFER TO SCHEDULE FOR ADDITIONAL DETAILSREFER OVERALL FURNITURE PLANS FOR WORKSTATION ORIENTATION (ALLOW TO MIRROR TO SUIT)REFER TO ADJACENT PLANS FOR ATYPICAL ITEMS (INCLUDING TRANSACTION TOPS AND ADDITIONAL BOOKCASES)
CO-OPSTUDENTS
48
6'-0"6'-0"
6'-0"6'-0"
2'-6
"
2'-6
"
ELECTRICSIT-TO-STANDWORKSURFACES
LAMINATETRANSACTIONTOP MOUNTEDTO PANEL
1'-0"
1'-0
"
4'-6"
LAMINATETRANSACTION TOPMOUNTED TO PANEL
RECEPTION WORKSTATIONS
35
OPEN AREA12
WORKSTATIONS42
3'-6
"
1'-0"
3'-0
"
3'-0
"
1'-0"
72" H. BOOKCASE 72" H. BOOKCASE
RECEPTIONC-02
F08
F08
F08
F08
F02
F02
F02
F02
RECEPTIONCOUNTER NOTINCLUDED INFURNITURE SCOPE
F23 - MOBILE PEDESTAL