+ All Categories
Home > Documents > MUNTERS Automotive Bro Nov16 · 2017. 3. 2. · Munters Dehumidification Solution All Munters...

MUNTERS Automotive Bro Nov16 · 2017. 3. 2. · Munters Dehumidification Solution All Munters...

Date post: 04-Oct-2020
Category:
Upload: others
View: 6 times
Download: 0 times
Share this document with a friend
4
Cost Effective and Energy Efficient Climate Control Optimize production, eliminate condensation & corrosion and reduce operating costs AUTOMOTIVE
Transcript
Page 1: MUNTERS Automotive Bro Nov16 · 2017. 3. 2. · Munters Dehumidification Solution All Munters dehumidifiers provide efficient and consistent humidity control regardless of the ambient

Cost Eff ective and Energy Effi cient Climate ControlOptimize production, eliminate condensation & corrosion and reduce operating costs

AUTOMOTIVE

Page 2: MUNTERS Automotive Bro Nov16 · 2017. 3. 2. · Munters Dehumidification Solution All Munters dehumidifiers provide efficient and consistent humidity control regardless of the ambient

The other air stream dries the rotor so itcan absorb moisture again and this accumulated moisture is then exhausted away externally. We deliver cost effective solutions at the highest quality level, that are manufactured under strict control regulations in our ISO 9001: 2008 and 14001 certified facilities. And our systems can be designed according to your requirements.

Benefits

• Production processes are optimized and remain constant year round

• Condensation is prevented

• Corrosion problems are prevented

• Low operating cost compared to alternative methods

• Testing and environmental conditions are adjustable and can be reproduced time and time again

Munters Dehumidification SolutionAll Munters dehumidifiers provide efficient and consistent humidity control regardless of the ambient or outdoor conditions, ensuring consistent conditions for manufacturing all year round with our patented Honeycombe™ Rotor Technology: two air streams pass simultaneously through two sectors of the desiccant rotor. One air stream is dehumidified to the required humidity level.

Engine and brake testing, exhaustgas measurementTo be able to register reliable measurements even for the lowest emissions, Munters technology helps supply well-defined dilution air purified at specified temperatures and low humidity levels. The system allows for variations in the air-flow, enabling tests to be exactly tailored to specific requirements. Standardized tests for product development and certification can be carried out to simulate summer and winter conditions.

2 Automotive Brochure

Climate ControlMunters is the world leader in humidity control with an extensive range of products and services that help our customers achieve their production goals. In the automotive industry, we have extensive experience delivering cost effective and energy efficient solutions for exhaust testing, parts and materials storage, injection molding, car window manufacturing, paint and coating processes, environmental chambers, and in many other application areas.

Page 3: MUNTERS Automotive Bro Nov16 · 2017. 3. 2. · Munters Dehumidification Solution All Munters dehumidifiers provide efficient and consistent humidity control regardless of the ambient

Reduce defects in laminating, moldingand fabrication processesMunters dehumidification equipment is used during manufacturing of automotive parts to reduce the unwanted effects of moisture. Our equipment creates the proper environment for testing, production assembly, and transportation of components such as safety glass, air bags, tires and plastics, along with many other products.

Storage without wasteMachinery and stored car components sensitive to humidity such as metal parts, electronics, raw materials, etc., run the risk of corroding; leading to waste and rejection of sub-standard parts. This destructive process is arrested by storing and transporting components in a low humidity climate.

Munters expertise and global serviceOur Munters trained service engineers and applications specialists are here to help customers find the right solution for their needs. Our support continues throughout the lifetime of the equipment with our global service network and choice of service plans designed to ensure smooth operation at all times.

Painting & CoatingHigh quality finishes and reduced drying times (with shorter drying tunnels) can be achieved when dry air is used during priming, painting and coating processes. Coating specifications often require a maximum Relative Humidity — too often unachievable during humid summer months which often result in premature coating failures, like cracks and blisters. By using humidity and temperature control, the quality of paint and coating processes remains consistent all year round; alleviating costly disruptions in production. This improvement in overall drying consistency in turn reduces rework incidences and keeps manufacturing costs down. Munters equipment also controls containment by using high-efficiency filters and fans, and can clean the air before releasing it into the environment. Additionally, treatment of paint booth exhaust air laden with Volatile Organic Compounds (VOCs), such as solvents, is easily accomplished with Munters Zeol rotor concentrator systems. The system concentrates a large exhaust volume containing a low concentration of VOCs into a small concentrated stream using zeolite Honeycombe™ media. The concentrated VOCs can be efficiently and cost-effectively destroyed in an oxidizer. Munters heat exchangers, such as Thermo-T™, recover heat from energy consuming processes, such as the abatement of paint booth exhaust, at temperatures up to 1093°C (2000°F). Energy can be recovered and returned as process make-up air, used to preheat combustion air, or used for plant or office heating.

Reliable acoustic chambers, wind tunnelsand climate chambersTest and measurement of engines, assemblies and finished vehicles are critical checkpoints in the manufacturing process. Test stations such as wind tunnels, soak boxes, environmental chambers and anechoic chambers require exact environmental conditions to ensure performance measurements are accurate and repeatable— assuring quality targets are met. Munters enables automotive manufacturers to simulate any environmental dew points as low as –70°C (–94°F). Munters solutions are a vital part of test chambers, and provide repeatable and controllable humidity levels for:

• Hot and cold start tests

• Heating and air conditioning performance evaluations

• Windscreen/window defrost/de-mist tests

• Functional, durable and structural assessment in extreme environments

• Component and material performance assessments

• Controlled thermal 'soaks' and solar radiation assessments

Automotive Brochure 3

Page 4: MUNTERS Automotive Bro Nov16 · 2017. 3. 2. · Munters Dehumidification Solution All Munters dehumidifiers provide efficient and consistent humidity control regardless of the ambient

Munters is a global leader in energy efficient air treatment solutions.

Munters manufactures engineered products that can economically control humidity and temperature, provide energy recovery, and/or utilize direct or

indirect evaporative cooling for comfort, process and environmental protection. With permanent or temporary solutions, Munters offers a wide variety of options to meet specific climate, application and budget requirements. Munters has net sales approaching $1 billion USD with more than 20

manufacturing facilities across the globe and sales offices in over 30 countries. Munters employs over 3,000 people worldwide.

For more information see www.munters.com

• Munters locations

Australia Phone +61 2 8843 1580, [email protected] Austria Phone +43 1 6164298-0, [email protected] Belgium & Luxemburg Phone +32 2 240 6868, [email protected] Brazil Phone +55 41 3317 5050, [email protected] Canada Phone +1 905 858 5894, [email protected] China Phone +86 10 8041 8000, [email protected] Czech Republic Phone +420 544 211 434, [email protected] Denmark Phone +45 4495 3355, [email protected] Finland Phone +358 40 186 3074, [email protected] France Phone +33 1 3411 5757, [email protected] Germany Phone +49 40 87 96 90-0, [email protected] India Phone +91 20 6681 8900, [email protected] Italy Phone +39 0183 521 377, [email protected] Japan Phone +91 3 5970 0021,[email protected] Korea +82 2 761 8701, [email protected] Mexico Phone +52 722 270 4029, [email protected] Netherlands Phone +31 172 43 32 31, [email protected] Poland Phone +48 58 305 35 17, [email protected] Singapore Phone +65 6744 6828, [email protected] South Africa Phone +27 11 971 9700, [email protected] Spain & Portugal Phone +34 91 640 09 02, [email protected] Sweden & Norway Phone +46 8 626 6300, [email protected] Switzerland Phone +41 52 3438886, [email protected] Thailand Phone +66 2 6422 6703, [email protected] Turkey Phone +90 216 548 1444, [email protected] UAE +971 4881 3026, [email protected] United Kingdom & Ireland Phone +44 1480 432243, [email protected] USA Phone +1 800 843 5360, [email protected] Vietnam Phone +84 8 3825 6838, [email protected]

Munters Corporation

Tel: (800) 843-5360 E-mail: [email protected] www.munters.com

BR0051-00 11/16


Recommended