14/03/2019
1
MWO Design of a Colpittsoscillator
RL = 1Kf0 = 1MHzVp = 10V
14/03/2019
2
14/03/2019
3
The quality factor of the circuit is Q = 1.1/0.06 18
Circuit without load (…bis)
14/03/2019
4
14/03/2019
5
14/03/2019
6
• The resistors for base biasing are found from a startingvalue for Vbe equal to 0.6V. Then, they are adjusted to get Ic = 1 mA (DRAW Add Annotation DCIA e DCVA_Nto see the bias point)
• Inductance L is chosen so that its reactance is greaterthan 50 times the load resistance
• Coupling capacitors are chosen so that their reactanceis lower than 1 Ω at oscillation frequency
14/03/2019
7
14/03/2019
8
14/03/2019
9
14/03/2019
10