Date post: | 20-Aug-2015 |
Category: |
Automotive |
Upload: | gbrown03 |
View: | 180 times |
Download: | 0 times |
GOT THE ENGINE IN!
Since I was putting the sr20 into the new shell I got I needed a new motor so I took the stock ka24de that came in my shell and I put it in the red car
SR20DET: When I found the reason my engine kept overheating. The problem turned out to be a blown head gasket worn piston rings and some worn valve seats. Since I had to pull my engine anyway to rebuild it I decided to buy a new shell to put the rebuilt engine in since the red one had pretty bad frame rust.
SHIFTER:Had to be removed so that the transmition could fit back through the dog house (the archway that goes through the center of the car)