428 Structured cabling system for the home sectorMY HOME
Structured cabling system for the home sector MY HOME 429
CONTENTSMY HOME – Structured cabling system for the home sector
General features 384
General rules for installation 400
Wiring diagrams 404
TV/SAT IPTV
TV/SAT IPTV
430 Structured cabling system for the home sectorMY HOME
What is the structured cabling system for the home sector?
remote control device
Telephone lineInternet
The advancement of multimedia
services, such as satellite TV and
terrestrial digital systems, internet
telephone systems and television,
have highlighted the need for a
specific cabling system inside the
house, ensuring the distribution of
the available services across various
rooms, avoiding the implementation
of untested solutions, which may
have unpredictable results
always attentive to technological
development and to the above stated
needs, BTicino offers an ideal and
convenient solution for the creation
of a “communication area” inside the
distribution board, which centralises
the devices for the distribution of the
TV/SAT system
Communication area inside the MY HOMe Flatwall distribution board
Telephone System, and the Television
and data signals
a “star” system is used to connect the
cables from the distribution board to
the user sockets in the various rooms
of the house
GEnEraL FEaTUrES
Communication area
TV/SAT IPTV
TV/SAT IPTV
TV/SAT IPTV
TV/SAT IPTV
Multimedia Touch Screen 10”
Touch Screen 3,5”
IPTV
TV/SAT
Structured cabling system for the home sector MY HOME 431
MY HOME AUTOMATION
SYSTEM APPLICATIONS
The home structured cabling system
allows the integration of devices
for the control of the MY HOME
functions a Multimedia Touch
Screen can be connected to the data
network to control all the home
automation functions from a room of
the house, allowing the user can take
advantage of multimedia contents
(audio and video) stored inside
other PCs connected to the network
By integrating the Web Server to
the network, it will be possible to
remotely control the MY HOME
system using a computer or mobile
phone connected to the internet
Telephone system
Data
Access Gateway
TV/SAT IPTV
Access Gateway
GEnEraL FEaTUrES
432 Structured cabling system for the home sectorMY HOME
The devices for the distribution of data, telephone and tv
xDSL fi lter with telephone distribution frame F558 to separate the ADSL data line from the Telephone line. The Telephone line is available on 3 independent outputs.
Power supply F552it provides 9 V, 1.6 A, voltage for the supply of active devices.
Telephone distribution frame F555it can be used to distribute 1 telephone line to 8 diff erent sockets, or 2 telephone lines to 4 sockets.
Access Gateway
TV/SAT IPTV
TV/SAT IPTV
Structured cabling system for the home sector MY HOME 433
Patch module F550C6for patching inside the user socket wiring distribution board. Wire and patch cord connections are concealed inside the distribution board and cannot be seen by the user.
6-way TV/SAT distribution frame F553
for the distribution of the television signal to 6 diff erent TV jacks.
Switch F551for the distribution of 1 data line to 4 diff erent rJ45 sockets.
Web Server F454for local and remote management of MY HOMe applications.
TV/SAT IPTV
TV/SAT IPTVTV/SAT IPTVTV/SAT IPTV
IPTV
Flatwall
GEnEraL FEaTUrES
434 Structured cabling system for the home sectorMY HOME
application examples:telephone, data, TV/SaT, iPTV and video door entry system
This drawing shows the possibility of
distributing, in addition to telephone
and data signals, also the iPTV service
TV/SaT and digital signals
in order to make the iPTV signal
available to the corresponding
decoder, it will be necessary to
install, inside the communication
distribution board, of a special
Gateway access device supplied by
the Supplier of the iPTV service
TV/SAT jacks
rJ45 sockets
Structured cabling system for the home sector MY HOME 435
MY HOMe video door entry systemThe following devices are installed
inside the distribution board:
Gateway access supplied by the
supplier of the iPTV service
data switch F551
TV/SaT distribution frame F553
Telephone distribution frame F555
Patch modules F550C6
xdSL fi lter with telephone
distribution frame F558
TV/SAT IPTV
TV/SAT IPTVTV/SAT IPTV
DSL InTerneT SerVICe
GEnEraL FEaTUrES
436 Structured cabling system for the home sectorMY HOME
application examples: telephone, data and integration with MY HOME for local and remote function control
This drawing shows the possibility
of installing a data and telephone
distribution system integrated with
the MY HOME system, for local and
remote function control
integration is made possible by
using the Web Server device, which
operates as a bridge between the
BUS wiring of the MY HOME system,
and the data network wiring system
This solution makes it possible to use
the 10” Multimedia Touch Screen
to control the home automation
functions, and to share the
multimedia content of other storage
devices connected to the data
network
Multimedia Touch Screen 10”
TV/SAT jacks
rJ45 sockets
remote control device
if the network has an internet
connection, it will be possible to
control all the home automation
function also remotely, using a PC, or
a mobile phone
The following devices are installed
inside the distribution board:
Gateway access supplied by the
supplier of the adSL service
Web Server F454
data switch F551
TV/SaT distribution frame
F553
Flatwall
Structured cabling system for the home sector MY HOME 437
xdSL fi lter with telephone
distribution frame F558
Telephone distribution frame F555
Patch modules F550C6
GEnEraL FEaTUrES
438 Structured cabling system for the home sectorMY HOME
Home structured cabling requires
a STar type structure: the user
socket connection cables meet in a
central point called “star centre” or
communication area
This is the area where the
connections with the access networks
for distribution of various services
(Telephone system, TV/SaT…),
as well as all active information
management and distribution
devices, are located in general, the
communication area is created by
grouping together all the devices in
an appropriate distribution board
to be installed near the general
distribution board of the home
in new or refurbished homes, where
the MY HOME FLaTWaLL solution has
been selected as the general electric
distribution board (for example, to
also centralise the MY HOME devices),
the communication area must be
created inside the distribution board
itself
Communication areas inside the MY HOMe FLATWALL distribution board
Cabling structure and components for the home sector
User socket
User socket
User socket
Structured cabling system for the home sector MY HOME 439
in addition to the distribution board
the following items can be identified:
Signal handling and distribution
devices;
Cables for the connection of the
devices to the various user sockets;
User sockets with connectors split
by service type
User socket
User socket
User socket
TV/SAT IPTV TV/SAT IPTV
GEnEraL FEaTUrES
440 Structured cabling system for the home sectorMY HOME
Cabling structure and components for the home sector
THE DEVICES FOR THE
DISTRIBUTION OF SIGNALS
The management of the data
network
To ensure the connection of several
computers to the data network
and the sharing of the internet
connection, the “Switch” device F551
must be used
The internet network connection
The connection to the internet
network requires an adSL modem,
which may also be supplied by the
internet Service Provider (iSP)
Switch F551
Patch modulesF550C6
WIRING DIAGRAM
rJ45 socket rJ45 socket
L4665L20/L40 patch cord
Switch F551
To the ADSL modem
TV/SAT IPTVTV/SAT IPTV
TV/SAT IPTVTV/SAT IPTV
Structured cabling system for the home sector MY HOME 441
For a detailed description of the listed devices see the corresponding technical
sheets .
The management of telephone
signals
The telephone signal does not
require any special management
devices, with the exception of a
special filter F558, which separates
the telephone signal from the digital
signal for the adSL modem The
device has 3 filtered outputs for
the connection of three telephone
jacks For more complex systems, a
distribution frame F555 can be used
to replicate one telephone line to
eight output lines intended for the
respective telephone connectors
WIRING DIAGRAM
XDSL filter F558
Telephone distribution frame F555
Patch modulesF550C6
rJ45 socket
rJ45 socket rJ45 socket
rJ45 socket
Telephone line
L4665L20/L40 patch cord
XDSL filter F558
TV/SAT IPTV
TV/SAT IPTV
TV/SAT IPTV
TV/SAT IPTV
GEnEraL FEaTUrES
442 Structured cabling system for the home sectorMY HOME
Cabling structure and components for the home sector
The management of the
television signals
The distribution of the television
signal (both terrestrial and satellite),
to several TV jacks, is entrusted to
the TV/SaT distribution frame F553,
which has one input connector and
six output connectors if the aerial
system provides mixed analogue and
digital signals, only one device will be
needed
WIRING DIAGRAM
Telephone distribution frame F555
Patch moduleF550C6
Socket rJ45
Socket rJ45 Socket rJ45
Socket rJ45
Patch cordL4665L20/L40
Switch F551
Patch module F550C6
if, on the other hand, the system
provides two separate signals, one
analogue and one digital, with
separate cables, one distribution
frame and the corresponding TV
connectors shall be used for each
signal
TV/SAT IPTV
TV/SAT IPTV
TV/SAT IPTV
TV/SAT IPTV
TV/SAT IPTV
TV/SAT IPTV
Structured cabling system for the home sector MY HOME 443
Signal patching
With this operation it is possible
to reconfigure over time the
correspondence between the user
sockets and the devices in the
communication area it is performed
using special patch modules F550C6,
to which the wiring cables are
connected
The connection with the devices
is performed using patch cords
L4665L20 and L4665L40
The special geometrical conformation
of the device (vertical cable input)
means that the wiring and the patch
cords can be concealed inside the
communication distribution board
WIRING DIAGRAM
TV/SAT distribution frameF553
TV/SAT system
TV/SAT socket
TV/SAT socket
TV/SAT socket
TV/SAT socket
TV/SAT socket
SAT decoder
TV/SAT distribution frameF553
GEnEraL FEaTUrES
444 Structured cabling system for the home sectorMY HOME
THE WIRING
in home structured cabling systems
two types of cables are used:
coaxial cables for the distribution
of the television signal;
4 pair twisted cable for the
transmission of telephone and
data signals
The CEi 306-2 (*) guide calls for a
so-called “basic” wiring characterised
by 1 cable with 4 symmetrical pairs
and 1 Coaxial cable destined to the
corresponding rJ45 type connectors
for data transmission, and to coaxial
connectors for the television
The same guide recommends
a so called “advanced” wiring,
characterised by 2 cables with 4
symmetrical pairs for data/telephone
services, and 2 coaxial cables for TV
signals
COAXIAL CABLE
The coaxial cable consists of a central
rigid or flexible conductor, insulated,
using dielectric material, from an
external cylindrical conductor called
“shield”
CABLE WITH 4 SYMMETRIC
PAIRS
Used for data and telephone
transmission, this cable consists
of 4 pairs of twisted cables it is
available with (STP, S-FTP) or without
(UTP) external shield For both, the
characteristic impedance is 100
Ohms
Shielded cable (STP)
Unshielded cable (UTP)
The performance in terms of
maximum frequency of the
transmitted signal, is expressed in
categories as below:
Category 5: data transmission up to
100 Mbit/s
Category 5e: data transmission up to
1000 Mbit/s (100 MHz)
Category 6: data transmission up to
1000 Mbit/s (250 MHz)
Category 6a: data transmission up to
10 Gbit/s (500 MHz)
due to the current transmission
requirement, the CEi guide
recommends 5e category cables
However, in order to prepare the
network for future applications,
category 6 or 6a cables are
recommended The typical use
requires capping with rJ45
connectors
Cavo COAXIAL
nOTe (*): CeI 306-2. Guide for telecommunication and multimedia distribution wiring inside residential buildings.
The Coaxial cable for Television
applications has a characteristic
impedance of 75 Ohms and a
diameter between 4 and 7 mm
Cabling structure and components for the home sector
L4279C6
nT4279C6
L4202D
AM5979C6
n4279C6
HC4269F
HS4214D
n4210D
L4269F
Structured cabling system for the home sector MY HOME 445
THE USER SOCKET
in the system configuration described
so far, each branch of the “Star
centre” reaches, and ends in, a user
socket normally consisting of one or
more connectors
There are two types of connectors for
the home data network:
TV signal coaxial connector
rJ45 standard connector with 8
contacts for telephone system and
data signals
For the connection of telephone devices with rJ11 connectors to rJ45 type connectors, the use of the rJ45/rJ11 adapter cable, L4664, is recommended
TV COnneCTOrS
Shielded TV and SAT COnneCTOrS in die-cast enclosure
Data network and telephone system connectors
rJ45 connectors
446 Structured cabling system for the home sectorMY HOME
Main requirements
DESIGN CRITERIA
during the design of the home data
network system, it is important that
the following aspects are defined in
orderly sequence:
Functions required (data, Telephone
system, TV);
Selection of the installation solutions
based on the features of the building
irrespective of the type of system and
the required functions, it is necessary
that the PLaniMETrY, as well as a
GEnEraL FUrniTUrE PLan, are made
available to the installer it must also
be considered that on a design and
installation point of view the creation
of a home data network system is
not very different from that of a
traditional electric power system
STANDARDS
The design and installation of the
home data network system must be
performed following the indications
and requirements contained in the
following documents:
CEI 306-2: Guide for
telecommunication and multimedia
distribution wiring inside residential
buildings
CEI 64-100/1: residential building
Guide for the presetting of the
infrastructures for electric, electronic,
and communication systems
Part 1: Building risers
CEI 64-100/2: residential building
Guide for the presetting of the
infrastructures for electric, electronic,
and communication systems
Page 2: dwellings (apartments)
CEI EN 50173-1: information
technology - Structured cabling
systems
Part 1: General requirements
CEI EN 50173-4: information
technology - Structured cabling
systems Page 4: Homes
DEFINITION OF THE FUNCTIONS
REQUIRED
The design of the data network
system requires a good knowledge
of the multimedia functions to be
installed around the home as a way
of example, attached is the table of
CEi 306-2 guide For each application
this table shows the features of the
corresponding wiring setup to be
implemented for the multimedia
network
* In order to take advantage of the fl exibility of the home wiring system, it is recommended that also for the telephone system service a 4 symmetrical pair cable is used, connected to a RJ45 socket, instead of the traditional twisted pair connected to the RJ11/12 socket. In this case, the same rJ45 socket used to connect the pc to the local ethernet network can be reused, for example, to connect a standard analogue telephone to the telephone line, without any intervention required on the horizontal wiring. The only action needed will be the patching of the termination of the corresponding cable in the Star centre, moving the connector from the ethernet switch to the telephone distribution frame. To connect a telephone unit with rJ11 socket to the rJ45 socket, use the corresponding cable rJ11/rJ45 L4664.
Selection of the cable by application type
CABLES SERVICE BAND CABLE USED
TV(terrestrial + satellite)
47...2150 Mhz COAXIAL
Traditional telephone system* 1 Mhz 1 symmetric pair
LAN 1 Gb/s 4 symmetric pairs
Structured cabling system for the home sector MY HOME 447
Creation of the communication area
ZONE FOR HOME WIRING
DEVICES
This area is occupied by the patch
modules connecting the user
sockets to the Star centre, as well
as all devices for the appropriate
distribution of the various signals to
the sockets themselves
On an installation point of view,
it is recommended that the
communication area is split in two
specific zones:
zone for the installation of
Gateway access devices
zone for home wiring devices
ZONE FOR GATEWAY ACCESS
DEVICES
This area is occupied by all active
and non active equipment, with
corresponding wiring for the
connection of the electric services
coming from the outside of the
home, such as:
Telephone line;
TV/SaT system from the central
unit downstream the aerials
an example of active device for
this area is the adSL modem with
integrated switch, and if applicable
the Gateway device for the signals
coming from the optic fiber network
On the other hand, a non active
device can be the filter for the
separation of the telephone signal
from the adSL data signal
For the operation of active devices, it
will be necessary to allow for
230 V power supply sockets, with the
corresponding disconnection and
protection devices in case of indirect
contact and overload
it must be considered that both
devices and wiring of the telephone
and data networks must be kept
separate from the 230 V electric
power supply devices and wiring
it will therefore be necessary to
also allow for partitions or similar
solutions for the separation of the
systems
if the FLaTWaLL switchboard is used,
a specific compartment is available
for the installation of multimedia
devices
Zone for home wiring devices
Zone for Gateway Access devices
GEnEraL rULES FOr inSTaLLaTiOn
448 Structured cabling system for the home sectorMY HOME
Positioning of the user sockets
it is recommended that 2 rJ45
sockets (data and telephone) and 1
TV jack are installed in each room,
every 3 75 m of the perimeter of
the room (ref CEi En 50173-4) The
number of sockets in each room
must, in any case, be such that
from each zone it will be possible
to reach the user point using a PC
or telephone connection cord not
longer than 5 metres without causing
any transit problems inside the
room Obviously, this requirement
must be assessed also taking into
account the current or future
position of the furniture, so that
the use of of the user sockets is not
prevented by the positioning of the
furniture For the power supply of
the connected devices, on the side
of each user socket one or more
230 V power supply sockets must
also be installed, inside dedicated
device holding boxes if no precise
design is available, the miminum
requirements recommended for each
standard room of the house could be
as follows:
example of a possible home wiring system.
Star centre distribution board
DIAGRAM
For the connection of telephone devices with rJ11 connectors to rJ45 type sockets, use the rJ45/rJ11 adapter cable L4664.
ROOM TYPE DEVICES TO BE USED
Kitchen 1 RJ45 socket (on worktop level) + 1 TV/SAT jack
Main bedroom 3 RJ45 sockets (2 of which for the telephone on bedside cabinets) + 1 TV/SAT jack
Second bedroom 2 RJ45 sockets (bedside cabinet and desk) + 1 TV/SAT jack
Living / sitting room 2 RJ45 sockets + 1 TV/SAT jack
Study 2 RJ45 sockets
Tavern 2 RJ45 sockets + 1 TV/SAT jack
Gym 1 RJ45 socket
Technical room (laundry room/boiler room, etc.)
1 RJ45 socket
1 2 3 4 5 6 7 8
EIA 568 B
Structured cabling system for the home sector MY HOME 449
User socket wiring
Cat. 6 UTP Connectors
in order to ensure access to all types
of services (data, telephone system,
and TV), the user socket must be
fitted with rJ45 connectors (female
type), and coaxial connectors for
aerial systems, with electric features
compatible with the ones of the
corresponding connection cables
RJ45 CONNECTORS
For the connection of modular rJ45
connectors to the 4 symmetric pair
data cable, two solutions can be
implemented, regulated by
Tia/Eia 568a or Tia/Eia 568B
standards respectively
These two standards are completely
similar in terms of performance and
supported applications The only
difference is that pair 2 and pair 3 are
switched
The main trend is to install systems
using the Tia/Eia 568B standard
connection requirements
By using this type of wiring, both the
signals for the distribution of the data
TV COAXIAL SOCKET
For the distribution of TV services
in the residential network wiring
system it is necessary to install
the Coaxial cable, which must be
connected, in the user sockets, to
the corresponding F or iEC type TV
jack (male type) The socket must be
compatible with the cable features
and must assure the transmission,
without relevant attenuation, of the
television signal with frequencies
up to 2 150 GHz BTicino has a wide
range of die-cast aluminium TV jacks
for the distribution of TV SaT and FM
radio signals
service and those for the telephone
system will be available on all the
pins of the connector, as shown in
the following table
rJ45 connector cablato secondo lo standard TIA/eIA 568B.
TV coaxial socket
From the table it is clear that pins 7 and 8 are not used. However, there are special applications that also require these pins.
RJ45 APPLICATION PIN NUMBER
1 2 3 4 5 6 7 8
Telephone system (analogue digital)
ISDN
Ethernet 10/100/1000 Mps
PLT1
a bIN
a bOUT
LINE
Power
(*) (*)
(*) (*)
F550C6 F550C6
F552F551
F558PLT1
230 Vac
450 Structured cabling system for the home sectorMY HOME
System with 3 active telephone jacks and 4 active data sockets
ITEM DESCRIPTION DIN MOD. QUANTITY
F551F552F558PLT1F550C6L4665L40/L20See catalogue
Switch 10/100 MbsPower supplyADSL filterProtect. against lightningPatch modulePatch cableRJ45 connector
41221
111111711
POTS+ADSLexternal telephone line
STAr CenTre
rJ45 sockets
nOTe (*): sockets preset for future patching
WirinG diaGraMS
adSL modem
PLT1
a bIN
a bOUT
LINE
L1 L2 L2L1
L1+L2L1
Power
(*)
(*)
F550C6
F558PLT1
F550C6F550C6 F550C6
230 Vac
F551
F555
F552 F551
Structured cabling system for the home sector MY HOME 451
System with 6 active telephone jacks and 6 active data sockets
ITEM DESCRIPTION DIN MOD. QUANTITY
F558PLT1F555F551
ADSL filterProtect. against lightningTel. distribution frameSwitch 10/100 Mbs
2244
1112
ITEM DESCRIPTION DIN MOD. QUANTITY
F550C6 F552L4665L40/L20See catalogue
Patch module Power supplyPatch cableRJ45 connector
11
1411514
nOTe (*): sockets preset for future patching
STAr CenTre
rJ45 sockets
POTS+ADSLexternal telephone line
adSL modem
PLT1
a bIN
a bOUT
LINE
Power
L1 L2 L2L1
L1+L2L1
F550C6
F558PLT1
F550C6F550C6
230 Vac
F551F555 F552
WirinG diaGraMS
452 Structured cabling system for the home sectorMY HOME
System with Gateway access, 6 telephone jacks, 4 data sockets, 1 iPTV jack, and 6 TV/SaT jacks
STAr CenTre
Gateway access (*)
rJ45 sockets
POTS+ADSLexternal telephone line
IPTV output
ITEM DESCRIPTION DIN MOD. QUANTITY
(*)F558PLT1F555F553F551
Access GatewayADSL filterProtect. against lightningTelephone distrib. frameHub TVSwitch 10/100 Mbs
22444
111111
ITEM DESCRIPTION DIN MOD. QUANTITY
F550C6F552L4665L40/L20See catalogueSee catalogue
Patch modulePower supplyPatch cableRJ45 connectorTV connecor
11
11114116
nOTe (*): Device supplied by the supplier of the IPTV service
PLT1
a bIN
a bOUT
LINE
Power
L1 L2 L2L1
L1+L2L1
F550C6
F553
Structured cabling system for the home sector MY HOME 453
Down from TV/SAT aerial TV distribution board with mixer
IPTV decoder SAT receiver
Television set with integrated DTT decoder (if the television is not fitted with one, connect it to the TV jack using an external DTT decoder)
TV jacks
type 4214D
PLT1
a bIN
a bOUT
LINE
L1 L2 L2L1
L1+L2L1
PowerPower
F550C6
F558PLT1
F550C6F550C6 F550C6
230 Vac230 Vac
F551 F551F555
F552F552
WirinG diaGraMS
454 Structured cabling system for the home sectorMY HOME
STAr CenTre
rJ45 sockets
POTS+ADSLexternal telephone line
System for distribution of telephone system, data network, TV/SaT signal
adSL Modem
PLT1
a bIN
a bOUT
LINE
L1 L2 L2L1
L1+L2L1
PowerPower
F553
Multiswitch
Structured cabling system for the home sector MY HOME 455
DTT decoder
TV jacks
B variant
Down from aerial
TO THe MY HOMe VIDeO DOOr enTrY SYSTeM
TV central unit IF/IF central unit Multiswitch
type 4214D
SAT receiverTV
ITEM DESCRIPTION DIN MOD. QUANTITY
F558PLT1F555F551F550C6F552F553L4665L40/L20See catalogueSee catalogueo
ADSL filterProtect. against lightningTelephone distrib.frameSwitch 10/100 MbsPatch modulePower supplyHub TVPatch cableRJ45 connectorTV connecor
2244114
1112112113116
PLT1
a bIN
a bOUT
LINE
Power
L1 L2 L2L1
L1+L2L1
F550C6
PLT1
F550C6F550C6
230 Vac
F551F555F552
346020
InOUT
Modem (*)
WirinG diaGraMS
456 Structured cabling system for the home sectorMY HOME
System with Wireless router modem external to the distribution board for the management of 4 data sockets
rJ45 sockets
rJ45 sockets
POTS+ADSLexternal telephone line
Note (*): If the Modem has an rJ11 input connector use the
L4664 adapter cable
STAr CenTre
ITEM DESCRIPTION DIN MOD. QUANTITYF558PLT1F555F551F552F550C6L4665L40/L20See catalogue
ADSL filterProtect. against lightningTelephone distrib.frameSwitch 10/100 MbsPower supplyPatch modulePatch cableRJ45 connector
22441.51
11111121212
PLT1
a bIN
a bOUT
LINE
Power
L1 L2 L2L1
L1+L2L1
SCS AI SCS AV
ETHERNET
F550C6
PLT1
F550C6
230 Vac
F551F555 F552
F558
F454
Structured cabling system for the home sector MY HOME 457
integration of the data and telephone system network with the MY HOME system, for local or remote function control
rJ45 sockets
10” Multimedia Touch Screen for local control
POTS+ADSLexternal telephone line TO THe MY HOMe SYSTeM
STAr CenTre
To the telephone system rJ45 sockets system
ITEM DESCRIPTION DIN MOD. QUANTITY
F454HC/HS4659F558PLT1F555
Web serverMultimedia Touch ScreenADSL filterProtect. against lightningTel. distribution frame
10
224
11111
ITEM DESCRIPTION DIN MOD. QUANTITY
F551F550C6F552L4665L40See catalogue
Switch 10/100 MbsPatch modulePower supplyPatch cableRJ45 connector
411
191108
adSL modem
F551 F551
F551
WirinG diaGraMS
458 Structured cabling system for the home sectorMY HOME
Expansion of the number of data sockets
The number of rJ45 sockets for data transmission shown in the electric diagrams can be extended by using several F551 switches in cascade, as shown in the example:
rJ45 sockets
rJ45 sockets
adSL modem
ITEM DESCRIPTION DIN MOD. QUANTITY
F551 Switch 10/100 Mbs 4 3