User Manual
MyAir User Manual
2
MyAir User Manual
3
Congratulations on your purchase of a MyAir zone control system. The MyAir system has been specifically designed to offer you air‐conditioning control system technology that incorporates a stylish 7 inch touchscreen, intuitive user operation and built in energy saving features.
GETTING STARTED:
Upon power up, the system will take up to 5 minutes to initialise
If your screen looks like this:
Go to page 5
MyAir User Manual
4
If your screen looks like this
Go to page 23
MyAir User Manual
5
QUICK START GUIDE
Your screen should look like this:
This is your home screen
On your air‐conditioning unit controller:
Select your mode (e.g. COOL or HEAT), set your temperature and turn the air‐conditioner on
On your MyAir Touchscreen:
Press ZONES and select the zones to condition, by pressing the zone name or by pressing OFF or ON
Use the UP and DOWN arrows to adjust the volume of air into each zone
MyAir User Manual
6
GETTING STARTED
On your air‐conditioning unit controller:
On your air‐conditioning unit controller select your mode (e.g. COOL or HEAT), set your temperature and turn the air‐conditioner on.
On your MyAir touchscreen
Press ZONES to bring up the Zones Screen:
ZONES SCREEN
Select the zones to condition, by pressing the zone name or by pressing OFF or ON
The dampers that control the airflow in your MyAir system have the ability to control the air in 5% increments. The percentage of maximum air volume flowing to each zone is indicated below the zone name e.g. 80%
When a zone is turned on, it will default to the last set percentage air volume setting
Use the UP and DOWN arrows next to the zone name to adjust the volume of air into each zone
Press ZONES or any part of the background screen to return to the Home Screen
MyAir User Manual
7
The Home Screen will show any zones that are open, and is a useful reminder to help you save energy by not conditioning rooms you are not using
Pressing a zone name on the home screen will turn that zone OFF
TO CHANGE A ZONE NAME
On the Zones screen, press and hold the zone name for approximately 3 seconds
The following screen will appear:
The cursor will default to the end of the zone name
Press the DEL key to delete characters
Zone names can be up to 14 characters, with the number to the right of the zone name showing how many more characters may be entered
When finished, press DONE
MyAir User Manual
8
SAVING A COMBINATION OF SETTINGS AS A FAVOURITE
If you have a particular combination of settings that you use frequently, this can be saved as a “favourite” for fast and easy recall at any time
The MyAir system will support up to 3 favourites
Set your zones as required on the Zones screen
Press SAVE AS
The below screen will appear:
Press the favourite button you wish to save your settings to
The following screen will display:
MyAir User Manual
9
Pressing yes to proceed will display the Editing Screen:
EDITING SCREEN
MyAir User Manual
10
CHANGE THE NAME OF A FAVOURITE
The cursor will default to the end of the zone name
Press the black DEL key to delete characters
Favourite names can be up to 14 characters, with the number to the right of the favourite name showing how many more characters may be entered
When finished, press DONE
The favourite will now show on the screen below the zones, as shown by the following screen:
Pressing a favourite button will instantly set the zones in the MyAir system to those saved settings
EDIT A FAVOURITE
Press the relevant favourite button
Press Save As and follow previous steps to bring up the Editing Screen
Make your changes
Press DONE to return to the ZONES screen
MyAir User Manual
11
DELETE A FAVOURITE
Press the relevant favourite button
Press Save As and follow previous steps to bring up the
Press and hold the red DELETE button
Press YES to confirm and return to the ZONES screen
TIMERS
The MyAir system features intuitive 7 day scheduling of up to 5 different programs
Press TIMERS to display the following screen:
MyAir User Manual
12
PROGRAMS
Press PROGRAMS to display the following screen:
PROGRAM SCREEN
MyAir User Manual
13
To add a new program press ADD A PROGRAM ‐ the following screen will display:
Enter the Start time for the program to start using the arrows on screen
Enter the Stop time for the program to stop using the arrows on the screen
The duration of the program will display below the days on the screen
Select the days for the program to run by pressing the corresponding day buttons
Press done to return to the Program screen, where your program will now display similar as shown:
MyAir User Manual
14
ENTER PROGRAM NAME
Press and hold the program name (shown as Program 1 above) for up to 3 seconds to display the following screen:
The cursor will default to the end of the program name
Press the black DEL key to delete characters
Program names can be up to 14 characters, with the number to the right of the program name showing how many more characters may be entered
When finished, press DONE
The Program screen will update, similar as shown:
MyAir User Manual
15
SET ZONE CONFIGURATIONS FOR A PROGRAM
Press CONFIGURE ZONES for the relevant program to display the following screen:
MyAir User Manual
16
Press a zone to toggle between ON and OFF for the setting of that zone during the time the program is set to run
Notes: A zone selected as ON during a program will default to its last percentage air volume setting
You will need to set your air‐conditioning unit controller to work in conjunction with your MyAir programs
DISABLE ALL PROGRAMS
If any programs are set, a small yellow dot will appear to the left of the TIMERS button, and also next to the PROGRAMS button
Press DISABLE ALL PROGRAMS to disable all programs on all days
This feature can be used for example when going away on holidays and provides a quick and easy way to ensure you save energy by not having the air‐conditioning running when you are not there
To re‐enable programs go into the relevant area and program as described previously
MyAir User Manual
17
NEW AIR (IF FITTED)
A New Air system can be fitted as an add‐on extra to your MyAir system
New Air allows outdoor air to be introduced to your air‐conditioning system
Note: Introducing outdoor air can reduce running costs if the ambient outside air is more favourable to your target temperature, but can also increase running costs if the outdoor is less favourable to your target temperature. For example, in COOL mode, you can save energy by selecting outdoor air only when the outdoor air is cooler than indoor.
Press the NEW AIR button to display the screen as follows:
To manually turn on outdoor air, press NEW (OUTDOOR) AIR ON
A yellow dot to the left of the NEW AIR button will appear
To manually turn off outdoor air, press NEW (OUTDOOR) AIR OFF
A red dot to the left of the NEW AIR button will appear
Notes: If New Air is on (either manually or quick timer as described below) it is recommended to set a Stop Timer – see Advanced New Air Timer
If New Air is on an INFO button will appear on the Home Screen to display messages to you
MyAir User Manual
18
NEW AIR TIMERS
QUICK TIMER
Press the QUICK NEW AIR TIMER button to show the following screen:
Pressing an amount of time as shown above will enable New (Outdoor) air for the period of time selected before turning off
ADVANCED NEW AIR TIMER
Press EDIT NEW AIR TIMER to display the following screen:
MyAir User Manual
19
The screen will default to the DISABLE option
STOP TIMER
Press STOP TIMER ONLY to display the following screen:
Set the time for New Air to turn off using the arrows on screen
MyAir User Manual
20
DAILY TIMER
From the Home Screen, press NEW AIR, EDIT NEW AIR TIMER and DAILY TIMER to display the following screen:
Set the start and stop times using the arrows on screen
MyAir User Manual
21
SETTINGS:
Pressing the SETTINGS button will display the following screen:
Adjust screen brightness and toggle screen beeps on and off using the + and – keys on screen
MyAir User Manual
22
7 DAY TRIAL
The MyAir system is fitted with a 7 day trial feature, and control can be disabled to the system after 7 days. A code from the dealer you purchased the system through is required to resume full operation.
To fully activate the system, go to SETTINGS and ENTER ACTIVATION CODE.
MyAir User Manual
23
QUICK START GUIDE
Your screen should look like this:
This is your home screen
Press MODE and select your desired mode of operation (COOL, HEAT, FAN ONLY or OFF)
Press MODE or anywhere on the background of the screen to return to the home screen
Select your Target Temperature by using the UP and DOWN arrows
Press ZONES and select the zones to condition, by pressing the zone name or by pressing OFF or ON
Use the UP and DOWN arrows to adjust the volume of air into each zone
MyAir User Manual
24
GETTING STARTED
Press MODE and select your desired mode of operation (COOL, HEAT, FAN ONLY or OFF)
Press MODE or anywhere on the background of the screen to return to the Home screen
Set your Target Temperature by using the UP and DOWN arrows.
Note: Setting very low temperatures on COOL mode, or very high temperatures on HEAT mode will not cool or heat your zones faster, but will cause your air‐conditioner to run longer to achieve the target temperature, resulting in higher energy usage
MyAir User Manual
25
SELECTING ZONES
Press ZONES to bring up the Zones Screen:
ZONES SCREEN
Select the zones to condition, by pressing the zone name or by pressing OFF or ON
The dampers that control the airflow in your MyAir system have the ability to control the air in 5% increments. The percentage of maximum air volume flowing to each zone is indicated below the zone name e.g. 80%
When a zone is turned on, it will default to the last set percentage air volume setting
Use the UP and DOWN arrows next to the zone name to adjust the volume of air into each zone
Press ZONES or any part of the background screen to return to the Home Screen
The Home Screen will show any zones that are open, and is a useful reminder to help you save energy by not conditioning rooms you are not using
Pressing a zone name on the home screen will turn that zone OFF
MyAir User Manual
26
TO CHANGE A ZONE NAME
On the Zones screen, press and hold the zone name for approximately 3 seconds
The following screen will appear:
The cursor will default to the end of the zone name
Press the DEL key to delete characters
Zone names can be up to 14 characters, with the number to the right of the zone name showing how many more characters may be entered
When finished, press DONE
MyAir User Manual
27
SAVING A COMBINATION OF SETTINGS AS A FAVOURITE
If you have a particular combination of settings that you use frequently, this can be saved as a “favourite” for fast and easy recall at any time
The MyAir system will support up to 3 favourites
Set your zones as required
Press SAVE AS
The below screen will appear:
Press the favourite button you wish to save your settings to
The following screen will display:
MyAir User Manual
28
Pressing yes to proceed will display the Editing Screen:
EDITING SCREEN
MyAir User Manual
29
CHANGE THE NAME OF A FAVOURITE
The cursor will default to the end of the zone name
Press the black DEL key to delete characters
Favourite names can be up to 14 characters, with the number to the right of the favourite name showing how many more characters may be entered
When finished, press DONE
The favourite will now show on the screen below the zones, as shown by the following screen:
Pressing a favourite button will instantly set the zones in the MyAir system to those saved settings
EDIT A FAVOURITE
Press the relevant favourite button
Press Save As and follow previous steps to bring up the Editing Screen
Make your changes
Press DONE to return to the ZONES screen
MyAir User Manual
30
DELETE A FAVOURITE
Press the relevant favourite button
Press Save As and follow previous steps to bring up the
Press and hold the red DELETE button
Press YES to confirm and return to the ZONES screen
TIMERS
The MyAir system features 2 types of timer – a turn on and turn off timer, and intuitive 7 day scheduling of up to 5 different programs
Press TIMERS to display the following screen:
MyAir User Manual
31
PROGRAMS
Press PROGRAMS to display the following screen:
PROGRAM SCREEN
To add a new program press ADD A PROGRAM ‐ the following screen will display:
MyAir User Manual
32
Enter the Start time for the program to start using the arrows on screen
Enter the Stop time for the program to stop using the arrows on the screen
The duration of the program will display below the days on the screen
Select the days for the program to run by pressing the corresponding day buttons
Press done to return to the Program screen, where your program will now display similar as shown:
MyAir User Manual
33
ENTER PROGRAM NAME
Press and hold the program name (shown as Program 1 above) for up to 3 seconds to display the following screen:
The cursor will default to the end of the program name
Press the black DEL key to delete characters
Program names can be up to 14 characters, with the number to the right of the program name showing how many more characters may be entered
When finished, press DONE
The Program screen will update, similar as shown:
MyAir User Manual
34
SET ZONE CONFIGURATIONS FOR A PROGRAM
Press CONFIGURE ZONES for the relevant program to display the following screen:
Press a zone to toggle between ON and OFF for the setting of that zone during the time the program is set to run
Notes: A zone selected as ON during a program will default to its last percentage air volume setting
MyAir User Manual
35
ON and OFF TIMER
From the Home Screen, press TIMERS, and then TIMER to display the following screen:
COMBINED ON AND OFF TIMER
The number of hours shown under SWITCH ON TIMER is the number of hours before the system starts
Also shown is the actual time the system will switch on
The number of hours shown under SWITCH OFF TIMER is the number of hours after the start time that the system stops.
Also shown is the actual time the system will switch off
Use the arrows on screen to adjust the relevant times, or use the quick options to the right of screen – Switch on (or off) in 30 minutes, 1 hour or 2 hours
Note: These are once only timers, they do not repeat each day
ON OR OFF TIMER
To use as an ON timer, set the SWITCH ON TIMER as described above, and ensure the OFF TIMER says OFF
MyAir User Manual
36
The SWITCH OFF TIME should display DISABLED
To use as an OFF timer, set the SWITCH OFF TIMER as described above, and ensure the SWITCH ON TIMER says OFF
The SWITCH ON TIME should display DISABLED
You can quick add 30mins, 1hr, 2hrs using the buttons on the right hand side.
Note: These are once only timers, they do not repeat each day.
When required timers are set press START TIMER to save and return to the Home Screen
CLEAR TIMERS
Press CLEAR TIMER to disable all timers and clear setting fields
REVIEWING TIMERS
Press the TIMER button on the Home Screen
Any set programs or timers will display as a summary as follows:
MyAir User Manual
37
If any programs or timers are set, a small yellow dot will appear to the left of the TIMERS button, and also next to the relevant TIMER or PROGRAM button
DISABLE ALL TIMERS AND PROGRAMS
Press DISABLE ALL to disable all Start/Stop/Start and Stop Timers, and all programs on all days
This feature can be used for example when going away on holidays and provides a quick and easy way to ensure you save energy by not having the air‐conditioning running when you are not there
To re‐enable timers and programs go into the relevant area and program as described previously
MyAir User Manual
38
NEW AIR (IF FITTED)
A New Air system can be fitted as an add‐on to your MyAir system
New Air allows outdoor air to be introduced to your air‐conditioning system
Note: Introducing outdoor air can reduce running costs if the ambient outside air is more favourable to your target temperature, but can also increase running costs if the outdoor is less favourable to your target temperatue. For example, in COOL mode, you can save energy by selecting outdoor air only when the outdoor air is cooler than indoor.
Press the NEW AIR button to display the screen as follows:
To manually turn on outdoor air, press NEW (OUTDOOR) AIR ON
A yellow dot to the left of the NEW AIR button will appear
To manually turn off outdoor air, press NEW (OUTDOOR) AIR OFF
A red dot to the left of the NEW AIR button will appear
Notes: If New Air is on (either manually or quick timer as described below) it is recommended to set a Stop Timer – see Advanced New Air Timer
If New Air is on an INFO button will appear on the Home Screen to display messages to you
MyAir User Manual
39
NEW AIR TIMERS
QUICK TIMER
Press the QUICK NEW AIR TIMER button to show the following screen:
Pressing an amount of time as shown above will enable New (Outdoor) air for the period of time selected before turning off
MyAir User Manual
40
ADVANCED NEW AIR TIMER
Press EDIT NEW AIR TIMER to display the following screen:
The screen will default to the DISABLE option
MyAir User Manual
41
STOP TIMER
Press STOP TIMER ONLY to display the following screen:
Set the time for New Air to turn off using the arrows on screen
Choose FAN ONLY or KEEP AIRCON MODE
FAN ONLY is the most energy efficient (disables outdoor compressor)
KEEP AIRCON MODE does not affect the outdoor compressor – outdoor compressor will run depending on selected mode, target temperature and ambient indoor conditions
When finished press DONE to return to the Home Screen
MyAir User Manual
42
DAILY TIMER
From the Home Screen, press NEW AIR, EDIT NEW AIR TIMER and DAILY TIMER to display the following screen:
Set the start and stop times using the arrows on screen
Choose FAN ONLY or KEEP AIRCON MODE
FAN ONLY is the most energy efficient (disables outdoor compressor)
KEEP AIRCON MODE does not affect the outdoor compressor – outdoor compressor will run depending on selected mode, target temperature and ambient indoor conditions
When finished press DONE to return to the Home Screen
MyAir User Manual
43
SETTINGS:
Pressing the SETTINGS button will display the following screen:
Adjust screen brightness and toggle screen beeps on and off using the + and – keys on screen
MyAir User Manual
44
7 DAY TRIAL
The MyAir system is fitted with a 7 day trial feature, and control can be disabled to the system after 7 days. A code from the dealer you purchased the system through is required to resume full operation.
To fully activate the system, go to SETTINGS and ENTER ACTIVATION CODE
MyAir User Manual
45
TROUBLESHOOTING
Most issues can be resolved by a system reset, much like re‐booting a computer
Turn off the isolating switch to your air‐conditioning system for 30 seconds and turn back on – this is usually located on the wall near the outdoor compressor unit (Ensure this does turn the power to your MyAir screen off)
Allow up to 5 minutes for the system to initialise
System not Cooling or Heating
Check:
Correct Mode selection
The outdoor air‐conditioning unit is running
The zone is on (if the zone is set to a low percentage, increase the percentage to 100% temporarily to check for correct zone operation)
Outdoor air is OFF
If the above doesn’t help, contact the dealer you purchased the system through for further assistance
Air flowing into a zone that is turned off
Your MyAir system has an in‐built safety feature, which will alleviate any excess pressure in the ductwork to a zone (sometimes more than 1) as selected by your installer. When the system is functioning in this mode, it will display a "C" below the zone name which can be reviewed in the zones screen
Excessive air flowing into a zone
Review zones and percentage air volume setting. If a "C" is showing below the zone name, this is the system safety feature alleviating excess air pressure
Not enough air flowing into a zone
Review zones and percentage air volume setting. Temporarily increase the air volume percentage to 100%
System turns on by itself
Review Timers and ensure there are no unknown timers operating