NEW!Arlington’s newest vapor barrier product
prevents air infiltration around single gang
boxes – without the need for a gasket.
Designed for new work, VB1 is easy to
install on most plastic or steel single gang
boxes.
Use the supplied #6-32 screws to
temporarily hold the VB1 in place during
the installation of 1/2" or 5/8" drywall.
Once the drywall is installed remove
the #6-32 screws and install the device.
Secure device box to framing member
per manufacturer’s instructions.
You can also fasten the VB1 to the
framing member using the flashed-over
holes in the flange.
1 Stauffer Industrial ParkScranton, PA 18517800/233.4717 • Fax 570/562.0646www.aifittings.com
Vapor Barrier Cover for Single Gang Boxes
NEW!
more onreverse
Prevents Air Infiltration around Steel or Plastic Boxes
CATALOG UPC/DCI/NAED DESCRIPTION UNIT/STD NUMBER MFG #01 8997 PKG
VB1 16430 Non-metallic 20 vapor barrier cover for single gang plastic or steel box Includes (2) #6-32 screws, 3/4 inches long
VB1
VB1__ 0220/15M
Distributed by
© 2020 Arlington Industries, Inc.
Easy installation on most single gang boxes...
Economical. No gasket required.
Helps meet energy saving codes where applicable.
VB1 covers a plastic or steel single gang box.
Holes in flangeship flashed-over
Use either device screw holes or the flashed-over holes
to hold the VB1 cover in place during drywall installation.
Option 1
Option 2
After drywall installation is complete install receptacle and cover.
For help
Obtaining
ENERGY
STARrating
Made in USA
VB1 spc sht.qxp_3810/4010AST spec sheet 4/1/20 7:46 AM Page 1