N2004 Tools 1 - Tractor Parts-Combine Parts-Farm Equipment ... · TOOLS 553 T OOLS Professional...

548

TOOLS

TOOLS

TOOLS SECTION

TOOLS

549

TOOLS

TOOLSProfessional Hand Tools

550

TOOLS

TOOLS

Professional Hand Tools

TOOLS

551

TOOLS

PROFESSIONAL HANDTOOLS

Each tool features an attractive theft resistant, highly visible, consumer oriented retail package.

All Performance Tool Professional Hand Tools feature theirUnconditional, “Hassle-Free” LIfetime Warranty.

®

Performance Tool extends the following warranty, and only to original retail purchasers: If any tool ever fails to give complete satisfaction, it may be returned, along with original sales receipt, for a free replacement of like

grade and quality, postage prepaid to Performance Tool.

®

®

• Fully polished chrome plating create a professional appearance that compliments the top-level quality.

• Forged from premier quality chrome vanadium steel then nickel plated to resist corrosion.

Sockets, Wrenches & Accessories

1/4" DRIVE SOCKET SETS

6 Point Standard Sockets

PART NO.456-7203

MFG. NO.W36002

SAE Standard 10 Piece SetCONTAINS SIZES

5/32”, 3/16”, 7/32”, 1/4”, 9/32”5/16”, 11/32”, 3/8”, 7/16”, 1/2”

PART NO.456-7204

MFG. NO.W36202

Metric 10 Piece SetCONTAINS SIZES

4mm, 5mm, 6mm, 7mm, 8mm,9mm, 10mm, 11mm, 12mm, 13mm

6 Point Deep Well Sockets

PART NO.456-7205

Mfg. No.W36300

SAE Deep Well 10 Piece SetContains Sizes

5/32”, 3/16”, 7/32”, 1/4”, 9/32”5/16”, 11/32”, 3/8”, 7/16”, 1/2”

PART NO.456-7206

Mfg. No.W36400

Metric Deep Well 10 Piece SetContains Sizes

4mm, 5mm, 6mm, 7mm, 8mm,9mm, 10mm, 11mm, 12mm, 13mm

RECESSEDEDGES

Professional Hand Tools-1/4" Drive Socket Sets

552

TOOLS

TOOLS

1/4" DRIVE SOCKETS

SIZE5/32”3/16"7/32"1/4"

9/32"5/16"11/32"3/8"

7/16"1/2"

PART NO.456-7223456-7224456-7225456-7226456-7227456-7228456-7229456-7230456-7231456-7232

MFG. NO.W36005W36006W36007W36008W36009W36010W36011W36012W36014W36016

PART NO.456-7243456-7244456-7245456-7246456-7247456-7248456-7249456-7250456-7251456-7252


SAE Deep WellSAE Standard

6 Point SAE Standard & Deep Well Sockets

6 Point Metric Standard & Deep Well Sockets

SIZE4mm5mm6mm7mm8mm9mm

10mm11mm12mm13mm

PART NO.456-7233456-7234456-7235456-7236456-7237456-7238456-7239456-7240456-7241456-7242


PART NO.456-7253456-7254456-7255456-7256456-7257456-7258456-7259456-7260456-7261

MFG. NO.W36404W36405W36406W36407W36408W36409W36410W36411W36412

Metric Deep WellMetric Standard

CHROMEVANADIUMCONSTRUCTED


RECESSEDEDGES

1/4” DRIVE SOCKET RAIL

MFG NO.W36000

PART NO.456-7222

18” Long - Holds 14 Sockets

LIFETIMEWARRANTY


TOOLS

553

TOOLS

Professional Hand Tools-1/4" Drive Ratchets1/4" Drive Attachments

1/4" DRIVE RATCHETS

MFG. NO.W36106

ROUND HEAD RATCHETS Designed with 42 gear teeth for all round performance.

PART NO.456-7209

Round Head Ratchet Quick Release,Stubby,Round Head Ratchet

MFG. NO.W36113

PART NO.456-7210

MFG. NO.W36114

PART NO.456-7211

Flexhead, Stubby,Round Head Ratchet

Quick Release Teardrop Ratchet Quick Release Teardrop Flexhead Ratchet


1/4" DRIVE ATTACHMENTS

LIFETIMEWARRANTY

LENGTH5-1/2”

LENGTH3-3/4”

LENGTH3-3/4”

TEARDROP RATCHETS Larger gear teeth in the ratchet mechanism designed with higher torque & added strength.

MFG. NO.W36101

PART NO.456-7207

LENGTH5-3/4” MFG. NO.

W36102PART NO.456-7208

LENGTH5-15/16”

Flex Handle Spinner Handle Thumbwheel Ratchet

Extensions

MFG. NO.W36118

PART NO.456-7213

LENGTH5-15/16”

MFG. NO.W36124

PART NO.456-7215

LENGTH6”

MFG. NO.W36123

PART NO.456-7214

MFG. NO.W36142W36143W36146W36940

PART NO.456-7217456-7218456-7219456-7220

LENGTH2”3”6”

3 Piece Set: 2”, 3”, 6”

Universal Joint

MFG. NO.W36130

PART NO.456-7216

SocketAdapter

MFG. NO.W36157

PART NO.456-7221

1/4” Drive to 3/8” Drive

554

TOOLS

TOOLS

PROFESSIONAL HANDTOOLS LIFETIME

WARRANTY



Supplied w/Molded Case

PART NO.456-7262

MFG. NO.W38911

SAE Standard 20 Piece SetCONTAINS

Sockets, Standard Sizes: 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”,Deep Sizes: 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”,

Spark Plug Sockets: 5/16” & 11/16”, Universal Joint,Teardrop Ratchet, Extensions: 3” & 6”

PART NO.456-7263

MFG. NO.W38914

CONTAINSSockets, Standard mm Sizes: 10, 11, 13, 14, 15, 16, 17, 19,

Deep mm Sizes: 10, 11, 12, 13, 14, 15, 16, 17, 19,Spark Plug Sockets: 16mm & 21mm, Universal Joint,

Teardrop Ratchet, Extensions: 3” & 6”

Metric 23 Piece Set

6 Point Standard Socket Sets 6 Point Deep Well Socket Sets

PART NO.456-7264

MFG. NO.W38002


1/4”, 5/16”, 3/8”, 7/16”,1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”

PART NO.456-7265

MFG. NO.W38202


10mm, 11mm, 12mm, 13mm,14mm, 15mm, 16mm, 17mm,

18mm, 19mm

PART NO.456-7266

MFG. NO.W38300


3/8”, 7/16”,1/2”, 9/16”, 5/8”,11/16”, 3/4”, 13/16”, 7/8”, 15/16”

PART NO.456-7267

MFG. NO.W38402


10mm, 11mm, 12mm, 13mm,14mm, 15mm, 16mm, 17mm,

18mm, 19mm

Professional Hand Tools-3/8" Drive Ratchets3/8" Drive Spark Plug Sockets

TOOLS

555

TOOLS

Professional Hand Tools-3/8" Drive Sockets

PROFESSIONAL HANDTOOLS LIFETIME

WARRANTY

3/8" DRIVE SOCKETS

SIZE1/4"

5/16"3/8"

7/16"1/2"9/16”5/8”

11/16”3/4”

13/16”7/8”

1-5/16”1-3/8”

PART NO.456-7299456-7300456-7301456-7302456-7303456-7304456-7305456-7306456-7307456-7308456-7309456-7310456-7311

MFG. NO.W38008W38010W38012W38014W38016W38018W38020W38022W38024W38026W38028W38030W38032

PART NO.456-7359456-7360456-7361456-7362456-7363456-7364456-7365456-7366456-7367456-7368456-7369456-7370456-7371


SAE DeepSAE Standard


RECESSEDEDGES


SIZE6mm7mm8mm9mm

10mm11mm12mm13mm14mm15mm16mm17mm18mm19mm20mm21mm22mm

PART NO.456-7312456-7313456-7314456-7315456-7316456-7317456-7318456-7319456-7320456-7321456-7322456-7323456-7324456-7325456-7326456-7327456-7328

MFG. NO.W38206W38207W38208W38209W38210W38211W38212W38213W38214W38215W38216W38217W38218W38219W38220W38221W38222

PART NO.- -

456-7372456-7373456-7374456-7375456-7376456-7377456-7378456-7379456-7380456-7381456-7382456-7383456-7384

- -456-7385456-7386

MFG. NO.- -

W38407W38408W38409W38410W38411W38412W38413W38414W38415W38416W38417W38418W38419

- -W38421W38422

Metric DeepMetric Standard

SIZE1/4"

5/16"3/8"

7/16"1/2"9/16”5/8”

11/16”3/4”

13/16”7/8”

15/16”1”

PART NO.456-7329456-7330456-7331456-7332456-7333456-7334456-7335456-7336456-7337456-7338456-7339456-7340456-7341


PART NO.456-7387456-7388456-7389456-7390456-7391456-7392456-7393456-7394456-7395456-7396456-7397456-7398456-7399


SAE DeepSAE Standard


3/8” Drive Socket Rail18” Long - Holds 14 Sockets

PART NO.456-7298

MFG. NO.W38000


SIZE6mm7mm8mm9mm

10mm11mm12mm13mm14mm15mm16mm17mm18mm19mm20mm21mm22mm

PART NO.456-7342456-7343456-7344456-7345456-7346456-7347456-7348456-7349456-7350456-7351456-7352456-7353456-7354456-7355456-7356456-7357456-7358

MFG. NO.W38806W38807W38808W38809W38810W38811W38812W38813W38814W38815W38816W38817W38818W38819W38820W38821W38822

PART NO.- -

456-7400456-7401456-7402456-7403456-7404456-7405456-7406456-7407456-7408456-7409456-7410456-7411456-7412

- -- -- -

MFG. NO.- -

W38707W38708W38709W38710W38711W38712W38713W38714W38715W38716W38717W38718W38719

- -- -- -

Metric DeepMetric Standard

556

TOOLS

TOOLS

3/8" DRIVE RATCHETS

3/8" DRIVE SPARK PLUG SOCKETS

LIFETIMEWARRANTY


ROUND HEAD RATCHETS Designed with 42 gear teeth for all round performance.

TEARDROP RATCHETS Larger gear teeth in the ratchet mechanism designed with higher torque & added strength.

PART NO.456-7270456-7271456-7272456-7273456-7274456-7275456-7276

456-7277456-7278456-7279

MFG. NO.W38106W38107W38108W38109W38101W38102W38103

W38112W38113W38115

DESCRIPTIONRound Head

Quick Release, Round HeadRound Flexhead

Quick Release, Round FlexheadQuick Release, Teardrop

Quick Release, Teardrop FlexheadQuick Release, Teardrop Flexhead

with Bent HandleStubby Round Head

Quick Release, Stubby Round HeadQuick Release, Stubby Round Flexhead

LENGTH7-7/8”7-7/8”

10-5/8”10-5/8”7-5/8”

11”11”

3-15/16”3-15/16”

5-1/4”

NO.1234567

89

10

PART NO.456-7413456-7414456-7415456-7416456-7417456-7418

MFG. NO.W38160W38163W38164W38162W38161W38165

DESCRIPTIONStandardStandardStandard

Extra LongFlexible ExtensionFlexible Extension

SAESIZE5/8”3/4”

13/16”5/8”5/8”

13/16”

EXTERNALHEX3/4”7/8”7/8”3/4”

--

OVERALLLENGTH

2-9/16”2-9/16”2-9/16”5-1/8”3-1/4”

3-5/16”


TOOLS

557

TOOLS

Professional Hand Tools-3/8" Drive Attachments

LIFETIMEWARRANTY



3/8" DRIVE ATTACHMENTSFlex Handle & Sliding T-Bar Handle

MFG. NO.W38118W38120

PART NO.456-7280456-7281

LENGTH11”6”

DESCRIPTIONFlex Handle

Sliding T-Bar Handle

Socket Adapters

MFG. NO.W38158W38159W30934

PART NO.456-7296456-7297456-7269

FEMALE TO MALE3/8” to 1/2”3/8” to 1/4”

4 PIECE SET:1/4” to 3/8”, 3/8” to 1/4”3/8” to 1/2”, 1/2” to 3/8”

Thumbwheel RatchetMFG. NO.

W38123PART NO.456-7282

Universal JointsMFG. NO.

W38130W30933

PART NO.456-7295456-7268

DESCRIPTION3/8”

3 Piece Set: 1/4”, 3/8”, 1/2”

Wobble Extensions

MFG. NO.W38141W38144W38148W38149W38151

PART NO.456-7290456-7291456-7292456-7293456-7294

LENGTH1-3/4”

3”6”8”

10”

Increased Angle Flexibility

Extensions

MFG. NO.W38140W38143W38146W38148W38150W38152

PART NO.456-7284456-7285456-7286456-7287456-7288456-7289

LENGTH1-3/4”

3”6”8”

10”4 Piece Set: 1-3/4”, 3”, 6”, 8”

NEW!10 PC. 3/8" DRIVE CROW FOOT WRENCH SETS• Compact wrenches are ideal for

access to confined areas• Popular SAE and Metric sizes• Heat Treated alloy drop forged steel• Polished chrome plated finish• Metric W452 set includes

10,12,13,14,15,16,17,18,19,21mm• SAE W453 set includes

3/8,7/16,1/2,9/16,5/8,11/16,3/4, 13/16,7/8, and 1"

MAP NO. MFG.NO. DESCRIPTION456-8600 W453 SAE CROWFOOT SET456-8700 W452 METRIC CROWFOOT SET

558

TOOLS

TOOLS

LIFETIMEWARRANTY





PART NO.456-7419

MFG. NO.W32901

SAE Standard 26 Piece SetCONTAINS

Sockets, Standard Sizes: 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”,7/8”, 15/16”, 1”, Deep Sizes: 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 7/8”, 15/16”,

1-3/16”, Spark Plug Sockets: 5/8” & 13/16”, Universal Joint, Teardrop Ratchet, 10” Flexhandle, Extensions: 3” & 5”

PART NO.456-7420

MFG. NO.W32904

Metric 26 Piece SetCONTAINS

Sockets, Standard mm Sizes: 12, 13, 14, 16, 17, 19, 21, 22, 23, 24, 27,Deep mm Sizes: 13, 14, 15, 16, 17, 18, 19, 21,

Spark Plug Sockets: 16mm & 21mm, Universal Joint, Teardrop Ratchet, 10” Flexhandle, Extensions: 3” & 5”

6 Point Deep Well Socket Sets

PART NO.456-7421

MFG. NO.W32002


1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16, 1”

PART NO.456-7422

MFG. NO.W32202

Metric 9 Piece SetCONTAINS SIZES12mm, 13mm, 14mm, 15mm, 16mm, 17mm,18mm, 19mm, 22mm

PART NO.456-7423

MFG. NO.W32300


1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”

PART NO.456-7424

MFG. NO.W32400


12mm, 13mm, 14mm, 15mm,16mm, 17mm, 18mm, 19mm

Professional Hand Tools-1/2" Drive Ratchets1/2" Drive Attachments

6 Point Standard Socket Sets

TOOLS

559

TOOLS

Professional Hand Tools-1/2" Drive Sockets

PROFESSIONAL HAND TOOLS

1/2" DRIVE SOCKETS

LIFETIMEWARRANTY

SIZE3/8"

7/16"1/2"9/16”5/8”

11/16”3/4”

13/16”7/8”

15/16”1”

1-1/16”1-1/8”

1-3/16”1-1/4”1-1/2”

PART NO.456-7440456-7441456-7442456-7443456-7444456-7445456-7446456-7447456-7448456-7449456-7450456-7451456-7452456-7453456-7454456-7455

MFG. NO.W32012W32014W32016W32018W32020W32022W32024W32026W32028W32030W32032W32034W32036W32038W32040W32048

PART NO.- -- -

456-7526456-7527456-7528456-7529456-7530456-7531456-7532456-7533456-7534456-7535456-7536

- -456-7537

- -

MFG. NO.- -- -

W32316W32318W32320W32322W32324W32326W32328W32330W32332W32334W32336

- -W32340

- -

SAE DeepSAE Standard6 Point SAE Std. & Deep Sockets

PART NO.456-7483456-7484456-7485456-7486456-7487456-7488456-7489456-7490456-7491456-7492456-7493456-7494456-7495456-7496456-7497456-7498


PART NO.- -- -

456-7554456-7555456-7556456-7557456-7558456-7559456-7560456-7561456-7562456-7563456-7564

- -456-7565

- -

MFG. NO.- -- -

W32616W32618W32620W32622W32624W32626W32628W32630W32632W32634W32636

- -W32640

- -

SAE DeepSAE Standard12 Point SAE Std. & Deep Sockets

SIZE3/8"

7/16"1/2"9/16”5/8”

11/16”3/4”

13/16”7/8”

15/16”1”

1-1/16”1-1/8”

1-3/16”1-1/4”1-1/2”

SIZE10mm11mm12mm13mm14mm15mm16mm17mm18mm19mm20mm21mm22mm23mm24mm25mm26mm27mm28mm29mm30mm31mm32mm33mm34mm35mm36mm

PART NO.456-7499456-7500456-7501456-7502456-7503456-7504456-7505456-7506456-7507456-7508456-7509456-7510456-7511456-7512456-7513456-7514456-7515456-7516456-7517456-7518456-7519456-7520456-7521456-7522456-7523456-7524456-7525

MFG. NO.W32810W32811W32812W32813W32814W32815W32816W32817W32818W32819W32820W32821W32822W32823W32824W32825W32826W32827W32828W32829W32830W32831W32832W32833W32834W32835W32836

PART NO.456-7566456-7567456-7568456-7569456-7570456-7571456-7572456-7573456-7574456-7575456-7576456-7577456-7578456-7579456-7580456-7581456-7582456-7583

- -- -- -- -- -- -- -- -- -

MFG. NO.W32710W32711W32712W32713W32714W32715W32716W32717W32718W32719W32720W32721W32722W32723W32724W32725W32726W32727

- -- -- -- -- -- -- -- -- -

Metric DeepMetric Standard12 Point Metric Std. & Deep Sockets

SIZE10mm11mm12mm13mm14mm15mm16mm17mm18mm19mm20mm21mm22mm23mm24mm25mm26mm27mm28mm29mm30mm31mm32mm33mm34mm35mm36mm

PART NO.456-7456456-7457456-7458456-7459456-7460456-7461456-7462456-7463456-7464456-7465456-7466456-7467456-7468456-7469456-7470456-7471456-7472456-7473456-7474456-7475456-7476456-7477456-7478456-7479456-7480456-7481456-7482

MFG. NO.W32210W32211W32212W32213W32214W32215W32216W32217W32218W32219W32220W32221W32222W32223W32224W32225W32226W32227W32228W32229W32230W32231W32232W32233W32234W32235W32236

PART NO.456-7538456-7539456-7540456-7541456-7542456-7543456-7544456-7545456-7546456-7547456-7548456-7549456-7550456-7551456-7552

- -- -

456-7553- -- -- -- -- -- -- -- -- -

MFG. NO.W32410W32411W32412W32413W32414W32415W32416W32417W32418W32419W32420W32421W32422W32423W32424

- -- -

W32427- -- -- -- -- -- -- -- -- -

Metric DeepMetric Standard6 Point Metric Std. & Deep Sockets

RECESSEDEDGES

560

TOOLS

TOOLS

1/2" DRIVE RATCHETS

LIFETIMEWARRANTY


TEARDROP RATCHETSLarger gear teeth in the ratchet mechanism designed with higher torque & added strength.

1/2" DRIVE ATTACHMENTS

ROUND HEAD RATCHETDesigned with 42 gear teeth for all round performance.

PART NO.456-7426456-7427456-7428

MFG. NO.W32101W32102W32106

DESCRIPTIONQuick Release, Teardrop

Quick Release, Teardrop FlexheadRound Head

LENGTH9-3/4”

11”9-7/8”


PART NO.456-7429456-7430456-7431456-7432

MFG. NO.W32118W32119W32120W32121

LENGTH10”15”18”24”

FLEX HANDLES EXTENSIONS

UNIVERSALJOINTS

MFG. NO.W32130W30933

PART NO.456-7439456-7268

DESCRIPTION1/2”

3 Piece Set: 1/4”, 3/8”, 1/2”

MFG. NO.W32143W32145W32150W32153

PART NO.456-7433456-7434456-7435456-7436

LENGTH3”5”

10”20”

SOCKET ADAPTERS

MFG. NO.W32157W32158

PART NO.456-7437456-7438

FEMALE TOMALE

1/2” to 3/8”1/2” to 3/4”

1/2” Drive Socket Rail18” Long - Holds 14 Sockets

PART NO.456-7425

MFG. NO.W32000

Professional Hand Tools-1/2" Drive Sockets & Attachments

NEW!1/2" DRIVE SAESPARK PLUG SOCKETS• Chrome Vanadium

Construction• Lifetime Warranty• 2 9/16" Overall Length

MAP NO. MFG.NO. DESCRIPTION456-8676 W32160 5/8" with ¾" External Hex456-8677 W32163 13/16" with 7/8" External Hex

TOOLS

561

TOOLS


LIFETIMEWARRANTY



Part No.456-7584

Mfg. No.W34904

SAE Standard 21 Piece SetContains

Sockets Sizes: 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 1-5/16” 1-3/8”, 1-7/16”, 1-1/2”, 1-5/8”, 1-3/4”, 1-13/16”, 1-7/8”, 2”,Teardrop Ratchet, T-Handle, Extensions: 4”, 8” & 16”

3/4" DRIVE RATCHETS

ROUND HEAD RATCHETDesigned with 43 gear teeth for all round performance.

TEARDROP RATCHETLarger gear teeth in the ratchet mechanism

designed with higher torque & added strength.

MFG. NO.W34100W34101

PART NO.456-7586456-7587

DESCRIPTIONQuick Release, Teardrop

Round Head

LENGTH19-11/16”19-11/16”

Professional Hand Tools-3/4” Socket Sets

562

TOOLS

TOOLS

3/4" DRIVE SOCKETS & ATTACHMENTSLIFETIMEWARRANTY


SIZE7/8”

15/16”1”

1-1/16”1-1/8”

1-3/16”1-1/4”

1-5/16”1-3/8”

1-7/16”1-1/2”

1-9/16”1-5/8”

1-11/16”1-3/4”

1-13/16”1-7/8”

2”2-1/16”2-1/8”

2-3/16”2-1/4”2-3/8”

PART NO.456-7596456-7597456-7598456-7599456-7600456-7601456-7602456-7603456-7604456-7605456-7606456-7607456-7608456-7609456-7610456-7611456-7612456-7613456-7614456-7615456-7616456-7617456-7618

MFG. NO.W34528W34530W34532W34534W34536W34538W34540W34542W34544W34546W34548W34550W34552W34554W34556W34558W34560W34564W34566W34568W34570W34572W34574

SAE Standard

12 Point SAE Standard Sockets

SIZE22mm23mm24mm25mm26mm27mm28mm29mm30mm32mm33mm35mm36mm38mm40mm41mm42mm46mm50mm55mm

PART NO.456-7619456-7620456-7621456-7622456-7623456-7624456-7625456-7626456-7627456-7628456-7629456-7630456-7631456-7632456-7633456-7634456-7635456-7636456-7637456-7638

MFG. NO.W34822W34823W34824W34825W34826W34827W34828W34829W34830W34832W34833W34835W34836W34838W34840W34841W34842W34846W34850W34855

Metric Standard

12 Point Metric Sockets

Flex Handle & Sliding T-Bar Handle

Extensions

Socket AdaptersUniversal Joint


RECESSEDEDGES

MFG. NO.W34120W34121

PART NO.456-7588456-7589

LENGTH19”18”

DESCRIPTIONFlex Handle

Sliding T-Bar Handle

MFG. NO.W34144W34148W34151

PART NO.456-7590456-7591456-7592

LENGTH4”8”

16”

MFG. NO.W34157W34158

PART NO.456-7593456-7594

FEMALE TO MALE3/4” to 1/2”3/4” to 1”

MFG. NO.W34130

PART NO.456-7595

Professional Hand Tools-3/4” Sockets & Attachments

TOOLS

563

TOOLS

Professional Hand Tools-Star & Hex Sockets

LIFETIMEWARRANTY


STAR & HEX SOCKETS

PART NO.456-7639

MFG. NO.W38802

Star Bit 12 Piece Set

CONTAINS SIZES1/4”, 3/8”, 1/2” Drive: T-10, T-15,

T-20, T-25, T-27, T-30, T-40, T-45, T-47, T-50, T-55, T-60

SIZET-10T-15T-20T-25T-27T-30T-40T-45T-47T-50T-55T-60

PART NO.456-7644456-7645456-7646456-7647456-7648456-7649456-7650456-7651456-7652456-7653456-7654456-7655

MFG NO.W36810W36815W36820W36825W36827W36830W38840W38845W38847W38850W38855W32860

1/4”, 3/8”, 1/2” Drive

Star Bit Sockets

DRIVE1/4”1/4”1/4”1/4”1/4”1/4”3/8”3/8”3/8”3/8”3/8”1/2”


PART NO.456-7642

MFG. NO.W38870

SAE Hex Bit 8 Piece Set(3/8” Drive)

CONTAINS SIZES1/8”, 9/64”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, 3/8”

PART NO.456-7643

MFG. NO.W38890

Metric Hex Bit 8 Piece Set(3/8” Drive)

CONTAINS SIZES3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm

SIZE1/8”

9/64”5/32”3/16”7/32”1/4”

5/16”3/8”

PART NO.456-7656456-7657456-7658456-7659456-7660456-7661456-7662456-7663

MFG. NO.W38874W38875W38876W38877W38878W38879W38880W38881

3/8” Drive

SAE Hex Bit Sockets

SIZE3mm4mm5mm6mm7mm8mm9mm

10mm

CAT. NO.456-7664456-7665456-7666456-7667456-7668456-7669456-7670456-7671

MFG NO.W38893W38894W38895W38896W38897W38898W38899W38900

3/8” Drive

Metric Hex Bit Sockets

564

TOOLS

TOOLS

LIFETIMEWARRANTY


COMBINATION WRENCH SETS

PART NO.456-7672

MFG. NO.W30202

SAE Standard Length 10 Piece SetCONTAINS SIZES

1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”,

3/4”, 13/16”

STANDARD & EXTENDED LENGTHS WRENCHES

STUBBY LENGTH WRENCHES

PART NO.456-7673

MFG. NO.W30002

Metric Standard Length 10 Piece SetCONTAINS SIZES

10mm, 11mm, 12mm, 13mm,14mm, 15mm, 16mm, 17mm, 18mm, 19mm

PART NO.456-7674

MFG. NO.W30302

SAE Extended Length 10 Piece SetCONTAINS SIZES

1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”,

3/4”, 13/16”

PART NO.456-7675

MFG. NO.W30102

Metric Extended Length 10 Piece SetCONTAINS SIZES

10mm, 11mm, 12mm, 13mm,14mm, 15mm, 16mm, 17mm, 18mm, 19mm

PART NO.456-7676

MFG. NO.W30200

SAE Standard Length 7 Piece SetCONTAINS SIZES

5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 3/4”

PART NO.456-7677

MFG. NO.W30001

Metric Standard Length 7 Piece SetCONTAINS SIZES

10mm, 12mm, 13mm, 14mm,15mm, 16mm, 18mm,

PART NO.456-7678

MFG. NO.W30507

SAE Stubby Length 7 Piece SetCONTAINS SIZES

3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”

PART NO.456-7679

MFG. NO.W30607

Metric Stubby Length 7 Piece SetCONTAINS SIZES

10mm, 12mm, 13mm, 14mm,15mm, 18mm, 19mm


SAE Standard Sizes Metric Sizes

Professional Hand Tools-Combination Wrench Sets

TOOLS

565

TOOLS

565

FLARE NUT WRENCHES & SETS

Flare Nut Wrench Sets

ADJUSTABLE WRENCHES

PART NO.456-7755

MFG. NO.W30430

SAE 4 Piece SetCONTAINS SIZES

1/4” X 5/16”, 3/8” X 7/16”,1/2” X 9/16”, 5/8” X 11/16”

PART NO.456-7756

MFG. NO.W30431


9 X 11mm, 10 X 12mm,13 X 14mm, 16 X 18mm

SAE SizesSIZE

3/8” X 7/16”1/2” X 9/16”5/8” X 11/16”3/4” X 7/8”

PART NO.456-7757456-7758456-7759456-7760

MFG. NO.W30402W30403W30404W30405

Flare Nut Wrenches

Metric SizesSIZE

9 X 11mm10 X 12mm13 X 14mm15 X 17mm16 X 18mm19 X 21mm

PART NO.456-7761456-7762456-7763456-7764456-7765456-7766

MFG. NO.W30409W30410W30413W30415W30416W30419

LENGTH

4”6”8”10”12”

PART NO.456-7784456-7785456-7786456-7787456-7788

MFG. NO.W30704W30706W30708W30710W30712

Professional Hand Tools-Combination Wrench Sets

LIFETIMEWARRANTY


COMBINATION WRENCHES

Metric Sizes

SAE Standard Sizes

SIZE1/4”

5/16”3/8’

7/16”1/2”

9/16”5/8”

11/16”3/4”

13/16”7/8”

15/16”1”

1-1/16”1-1/8”1-1/4”

PART NO.456-7680456-7681456-7682456-7683456-7684456-7685456-7686456-7687456-7688456-7689456-7690456-7691456-7692456-7693456-7694456-7695


SAE Standard LengthLENGTH

3-7/8”4”

4-1/2”5-1/8’5-3/4”6-5/8”7-1/8”8-1/8”

9”10-1/8”

11”12-1/8”12-3/4”14-1/4”

15”16-1/8”

SIZE6mm7mm8mm9mm

10mm11mm12mm13mm14mm15mm16mm17mm18mm19mm20mm21mm22mm23mm24mm25mm

PART NO.456-7696456-7697456-7698456-7699456-7700456-7701456-7702456-7703456-7704456-7705456-7706456-7707456-7708456-7709456-7710456-7711456-7712456-7713456-7714456-7715

MFG. NO.W30006W30007W30008W30009W30010W30011W30012W30013W30014W30015W30016W30017W30018W30019W30020W30021W30022W30023W30024W30025

Metric Standard LengthLENGTH

3-7/8”3-7/8”4-1/8”4-5/8”4-7/8”5-1/8”5-5/8”5-3/4”6-5/8”7-1/8”8-1/8”8-1/8”

9”9’

10-1/4”10-1/4”10-7/8”10-7/8”12-1/4”

13”

STANDARD& EXTENDED

LENGTHS

566

TOOLS

TOOLS

Professional Hand Tools-Pliers

LIFETIMEWARRANTY


PLIERS• Manufactured from top quality carbon steel.

• Each plier features EZ grip, double cushioned handles for a firm yet comfortable grip.

COMBINATION PLIERS

Slip Joint

Groove Joint

DESCRIPTION6” Slip Joint8” Slip Joint

10” Slip Joint9-1/2” Groove Joint

12” Groove Joint16” Groove Joint

PART NO.456-7789456-7790456-7791456-7792456-7793456-7794

MFG. NO.W30720W30721W30722W30741W30743W30745

RUGGEDCONSTRUCTIONSPECIALTY PLIERS

DESCRIPTION6” Diagonal8” Diagonal8” Linesman6” Long Nose

6” Curved Long Nose8” Long Nose

PART NO.456-7795456-7796456-7797456-7798456-7799456-7800

MFG. NO.W30725W30726W30728W30731W30732W30733

Diagonal

Linesman Long Nose

Curved Long Nose

LOCKING PLIERS

Curved JawLong Nose

Straight Jaw

DESCRIPTION5” Curved Jaw7” Curved Jaw

10” Curved Jaw10” Straight Jaw6-1/2” Long Nose

9” Long Nose

PART NO.456-7801456-7802456-7803456-7804456-7805456-7806

MFG. NO.W30752W30754W30756W30757W30758W30760

TOOLS

567

TOOLS

LIFETIMEWARRANTY


SCREWDRIVERS• Premier quality, 100% acetate handles & top quality chrome vanadium shafts.

• Blackened tips for added strength & durability

BLADESIZE1/8”3/8”

3/16”3/16”1/4”1/4”1/4’

5/16”3/8”3/8”

1/4”stubby5/16”

PART NO.456-7822456-7823456-7824456-7825456-7826456-7827456-7828456-7829456-7830456-7831456-7832456-7833

MFG. NO.W30970W30983W30986W30987W30988W30989W30990W30991W30992W30993W30994W30995

SHAFTLENGTH

3”12”3”6”4”6”8”6”8”

10”1-1/2”

8”

SLOTTED SCREWDRIVERS

PHILLIPS SCREWDRIVERS

BLADESIZE

#0#1#1#2#2#2

#2 stubby#3#4

PART NO.456-7813456-7814456-7815456-7816456-7817456-7818456-7819456-7820456-7821

MFG. NO.W30960W30961W30962W30963W30964W30965W30967W30968W30969

SHAFTLENGTH

2-1/2”3”6”4”6”8”

1-1/2”6”8”

STARDRIVERS

STARSIZET-10T-15T-20T-25T-27T-30

PART NO.456-7807456-7808456-7809456-7810456-7811456-7812

MFG. NO.W30810W30815W30820W30825W30827W30830

General Purpose Hand Tools-Screwdrivers

NEW!PRO STYLE 7 PC.NUT DRIVER SET• Pro style poly-polypropylene handles• Chrome plated drop forge steel shafts• Hollow shanks• Includes 3/16,1/4, 5/16,

11/32, 3/8, 7/16, & ½"MAP NO. MFG.NO.456-4047 W950

NEW!3/8" DRIVE IMPACT DRIVER W2500P• Loosen rusted bolts, screws, etc.• Reversible action• Includes 4 bits: #2 & #3

Phillips, and 5/16" &3/8" Slotted

• Handy storage case

MAP NO. MFG.NO. DESCRIPTION456-571 W2500P Impact Driver Kit456-572 W250036 Replacement 4 pc Bit Set

568

TOOLS

TOOLS

General Purpose Hand Tools-Tool Sets

• Fully polished Pro Style 3/8” Dr. Ratchet• 3/8” & 1/4” Dr. SAE & Metric sockets:

extension, 1/4” adapter, 3/8” U-Joint, spark plug sockets• Long nose plier & diagonal cutter, 10 SAE & Metric combination wrenches,

6” adjustable wrench• 3 pc high visibility screwdriver set, 20 pc specialty bit set with Star,

Robertson, Hex, Phillips & Reg. bits, Magnetic bit driver and 10 pc bit boots• Pro style wire crimper, 12 V tester, electrical tape, assorted wire terminals• Detail brush, break-away knife, heavy duty blow molded casePART NO.

456-667

GENERAL TOOL SETS

119 pc. MULTI-USE TOOL SET

MFG. NO.W1193

• T-10, T-15, T-20, T-25, T-30 and T-40 Star bits• R-1 & R-2 Robertson bits • 3/16 & 1/4 Slotted bits• 1/8, 5/32, 3/16 & 1/4” Hex bits• 3 ea. #2 Phillips double-ended 110mm bits• 2 ea. #2 Hi Torque bits• #2 Phillips 100mm bits • #2 Hi Torque 100mm bits• #2 & #3 Phillips double-ended 65mm bits• #1, #2 & #3 Hi Torque double-ended 65mm bits• 6mm Slotted double-ended 45mm bit• 1/4” hex to 1/4” square drive adaptor• 7/32, 1/4, 9/32, 5/16, 3/8, 7/16 & 1/2”

1/4”-hex-drive 6 point nutdrivers• Magnetic hex extension• 1/16, 3/32, 1/8, 5/32 & 3/16” drill bits• 2 ea. 10-bit capacity belt clips• 4-bit capacity bit holder• Blow molded storage case

45 pcPOWERBIT SETPART NO.456-580

MFG. NO.W1352

NEW!59 pc. DRILL ANDPOWER BIT SETContains:• 21 Titanium coated drill bits

ideal for drilling metal,woodand plastic.Titanium coatinglast up to 6 timeslonger.

• 34 assorted bits: 1" length Phillips, Slotted, Square Drive,Starbits and Pozidrive bits; 2" length Phillips, Slotted, and Square Drive; Double ended Phillips and Pozidrive bits, Counter Sink and bit holders

• Handy carrying cases help get the tools to the job• Clamshell packaging

MAP NO. MFG.NO.456-573 W1357

NEW! 56 pc DRILL AND BIT PROJECT SET Features-• Slotted, Slotted Extra Long,

Phillips,Phillips Extra Long,Star and Pozidrive bits

• Magnetic Quick changebit extension

• 29 assorted drill bits• Hole saws and hole saw mandrel• Center punch, Countersink, Quick

Read Tape Measureand Pocket Level

• Clamshell packagedMAP NO. MFG.NO.456-574 W1349

125 pc DRILL AND BIT PROJECT SETFeatures-• 67 Crv Bits - Slotted, Phillips, Hex Star,

Hi-Torque Robertson & Combo• 7 SAE and 7 METRIC Assorted Nut Drivers• Magnetic Quick Change Bit Extension &

28 Drill Bits• 4 Hole Saws, Hole Saw Mandrel, ¼" Center

Punch, Counter Sink, Bit Holders, Screw Finders

MAP NO.456-577

MFG. NO.W1347

TOOLS

569

TOOLS

GENERAL PURPOSE HAND TOOLSCOMBINATION WRENCHES

MEETS OR EXCEEDS ANSISTANDARD B107.1

THESE WRENCHES ARE MADE OF HEATTREATED VANADIUM STEEL. FULL PATTERN,RAISED PANEL DESIGN, WITH POLISHED,CHROME PLATED FINISH.LIFETIME WARRANTYCOMBINATION WRENCHESALL 12 POINT

PART NO.456-3209456-3211456-3213456-3215456-3217456-3219456-3221456-3223456-3225456-3229456-3231456-3233456-3235456-3237456-3241

SIZE1/4"5/16"3/8"7/16"1/2"9/16"5/8"11/16"3/4"7/8"15/16"1"1-1/16"1-1/8"1-1/4"

MFG.NO.W320BW321BW322BW323BW324BW325BW326BW327BW328BW330BW331BW332BW333BW334BW340B

COMBINATION WRENCH SETS

14 PC. COMBINATIONWRENCH SETS

SAE3/8" - 1-1/4" drop forged alloy steel.Carefully milled and broached open-ings. Fully polished ends and raised

panels. Each in fitted roll-up kit.

METRIC6mm-22mm drop forged alloy steel.Carefully milled and broached open-ings. Fully polished ends and raised

panels. Each in fitted roll-up kit.

Mechanics Quality

PART NO.456-565456-567

TYPESAE

METRIC

General Purpose Hand Tools-Combination Wrenches

NEW!6 PC. COMBINATION WRENCH SETS• Drop forged chrome plated carbon steel• Handy vinyl pouch• Full pattern raised panel design• Available SAE and METRICW1106 SAE set contains: 7/16,1/2,9/16,5/8,11/16 & ¾"W1106M METRIC set contains: 8,10,12,13,14 & 15mmMAP NO. MFG.NO. DESCRIPTION456-562 W1106 SAE Set456-563 W1106M METRIC Set

NEW!12 PC.COMBINATION WRENCH SETS WITH RACK• Metal rack for storage on wall or in tool box• Full pattern raised panel design• Drop forged chrome plated carbon steel• Available SAE and METRICW1065 SAE set contains: ¼,5/16,3/8,7/16,1/2,9/16,5/8,11/16¾,13/16, & 7/8"W1066 METRIC set contains: 6,7,8,9,10,11,12,13,14,17 &19mmMAP NO. MFG.NO. DESCRIPTION456-560 W1065 SAE Set456-561 W1066 METRIC Set

570

TOOLS

TOOLS

General Purpose Hand Tools-Combination Wrench DisplaySAE Stubby Wrench SetsAdjustable Wrenches, Pipe Wrenches

GENERAL PURPOSE HAND TOOLS

COMBINATION WRENCH DISPLAYThis 50 piece combination wrench display containsthe most popular wrenches. Display is compact forcounter use. Contains 5 pcs of 3/8", 10 of 7/16", 15of 1/2", 15 of 9/16", and 5 of 5/8". Wrenches aredrop forged, chrome plated alloy steel, and full pat-tern, with raised panels.

PART NO.456-8256

MFG. NO.W50SAE

ADJUSTABLE WRENCHES

PIPE WRENCHES

• MADE OF FINE QUALITY STEEL• DROP FORGED STEEL JAWS• TOUGH RED ENAMEL FINISH• PROFESSIONAL USE

HEAVY DUTY - PROFESSIONAL QUALITY

ADJUSTABLE WRENCHES

PART NO.456-8250

• HEAVY DUTY DROP FORGED STEEL• FULLY POLISHED HEADS• TEAL COLOR CUSHION GRIP HANDLES• SIZES: 6, 8 & 10 IN.• PACKED IN STURDY TRAY FOR EASY

TOOLBOX ORGANIZATION

MFG. NO.W80016

3 PC. ADJUSTABLE WRENCH SET

PART NO.456-8405456-8406456-8407456-8408

MFG. NO.W1133-8B

W1133-10BW1133-14BW1133-18B

SIZE8"

10"14"18"

• Drop forged carbon steel• Chrome plated• Fully polished head• Sizes 6" thru 12" are carded• Sizes 15" thru 24" are bulk

MAP NO. MFG.NO. SIZE456-4053 W6C 6"456-4054 W8C 8"456-8233 W10C 10"456-8234 W12C 12"456-8235 W415C 15"456-4060 W418P 18"456-8236 W424P 24"

TOOLS

571

TOOLS

• Drop forged carbon steel• Polished chrome plated finish• Stubby design allows use in confined areas• SAE sizes: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16 & 3/4 in.• Metric sizes: 10, 12, 13, 14, 15, 17 & 19 mm.

7 PC. SAE STUBBYWRENCH SETS

PART NO.456-575456-576

MFG. NO.W80054W80055

TYPESAE

Metric

NEW!LIGHTED 3/8" DRIVE QUICKRELEASE RATCHET • Convenient one-handed operation• Comfortable ABS Handle• 100,000+Hour Bulb• 12v Battery Included• ANSI approvedMAP NO. MFG.NO.456-578 W1521

NEW!31 pc. 3/8" DRIVE SOCKET SETWITH QUICK RELEASE LIGHTEDRATCHETContains: • 3/8" LED Lighted QuickRelease Ratchet• 12 - Chrome Vanadium 12 point

SAE StandardSockets - Sizes: 5/16,3/8,7/16,1/2,9/16,5/8,11/16,3/4,13/16,7/8,15/16, & 1"

• 12 - Chrome Vanadium 12 pointMETRIC standardSockets - Sizes: 8,9,10,11,12,13,14,15,16,17,18 & 19mm

• 2- Spark Plug sockets (5/8"/16mm &13/16"/21mm)

• 3 and 6" Extensions and U-Joint• 100,000+ Hour Bulb• 12v Battery included

MAP NO. MFG.NO.456-579 W1522


General Purpose Hand Tools-Ratchets & Combination Wrenches

572

TOOLS

TOOLS

456-7900

456-7901

456-7905


NEW!COUNTER TOP DISPLAYS - DUAL DRIVE STUBBY RATCHETS

These new dual drive ratchets feature-• Comfortable rubber cushion grip handle• 72 gear teeth for speed and durability• Chrome Vanadium steel construction• Compact stubby design make these tools

perfect for working in tight spots• Wrenches are packaged in beautiful color

countertop display cartons

¼" & 3/8" DUAL DRIVE STUBBY RATCHETMAP NO. MFG. NO.456-7902 W38110

¼" & 3/8" DUAL DRIVE STUBBY RATCHETWITH FLEX HEADMAP NO. MFG.NO.456-7903 W38111

3/8" & ½" DUAL DRIVE STUBBY RATCHETMAP NO. MFG.NO.456-7904 W32110

NEW! PRECISION STUBBYADJUSTABLE WRENCH • Stubby adjustable wrench has precision craftedthumb screw for smooth operation• Features a 1" rule for precision adjustment• Packaged 12 per color countertop display

MAP NO. MFG.NO.456-7920 W30702

456-7902456-7904

456-7903

456-7920

NEW!COUNTERTOP DISPLAYS - COMFORT GRIP DUAL DRIVE RATCHETSThese new dual drive ratchets feature-• Comfortable rubber cushion grip handle• 72 gear teeth for speed and durability• Chrome Vanadium steel construction• Standard length and cushion grip for extraleverage• Wrenches are packaged in beautiful colorcountertop display cartons

1/4" & 3/8" DUAL DRIVE RATCHETMAP NO. MFG.NO.456-7900 W38116

3/8" & ½" DUAL DRIVE RATCHETMAP NO. MFG.NO.456-7901 W32111

3/8" DRIVE OFFSET RATCHETMAP NO. MFG.NO.456-7905 W38117

General Purpose Hand Tools-Ratchets& Adjustable Wrench

TOOLS

573

TOOLS

CRESCENT GROOVE JOINT PLIERS

GROOVE-JOINT PLIERS, DROP FORGED"UNDERCUT" GROOVES, PLASTIC HANDLES

The R27C has five grooves. The R212C has sixgrooves and opens wide for use by plumbers onunions and fixtures. The HL120P have elevengrooves so that all size objects are easily andsecurely held.

PART NO.456-4516456-4519

MFG. NO.R212CHL120P

SIZE12"20"

CAPACITY2-1/8"5-1/2"

PART NO.456-4585

• Heat treated alloy steel• Fully polished heads• 6” slip joint, long nose & diagonalcutter and 7” lineman’s plier

• Popular teal color cushion grip handles• Packed in sturdy tray for easy toolbox organization

MFG. NO.W80014

4 PC. PLIER SET

SLIP JOINT PLIERS

CEE TEE COMBINATION

DROP-FORGED FROM CARBON STEEL AND ACCURATELYMACHINED FOR BEST GRIPPING AND TURNING OF ROUNDOBJECTS SUCH AS PIPES, RODS, STUDS, PIN ANDCONNECTIONS. AN ALL PURPOSE TOOL.

LENGTH6"

Bolt & Nut

MFG. NO.H26

PBN6

PART NO.455-46248455-46161

• HEAT TREATED ALLOY STEEL• DROP FORGED FOR STRENGHT• POLISHED HEADS• BLACK MATTE CUSHION GRIPS

LENGTH6"8"

MFG. NO.W1120PCW1121PC

PART NO.456-4110456-4120

MINI-PLIER, POCKET SIZE, IDEAL FOR TOOL BOX,KITCHEN, CAR, SPORT PACK, TACKLE BOX. POL-ISHED, NICKEL, CHROME PLATED WITH PLASTICHANDLE.

CRESCENT MINI PLIERS

LENGTH4”

MFG. NO.G24CV

PART NO.456-4576

CAPACITY3/4”

General Purpose Hand Tools-Crescent Groove Joint PliersPlier Set

Slip Joint Pliers, Crescent Mini Pliers


NEW!5 PC. MINI-PLIER SETIncludes 1 of each of Long Nose,Flat Nose, Diagonal Cutter, BentNose, & End NipperMAP NO. MFG.NO.456-4582 W1132

574

TOOLS

TOOLS

8 IN 1 MAGNETIC LIGHTEDSCREWDRIVER DISPLAY

INCLUDES:• TELESCOPING RETRIEVER• DUAL LIGHTS IN HANDLE ILLUMINATE DARK,

CONFINED AREAS• USES 2 AAA BATTERIES (NOT INCLUDED)• SHAFT MOUNTED BIT HOLDER• 6 SCREWDRIVER BITS: #1, 2, & 3 PHILLIPS &

1/8, 3/16, & 1/4 SLOTTED• MAGNETIC RETRIEVER EXTENDS TO 23 1/2"

PART NO.456-445

MFG. NO.W971

SOLD 10 UNITS PERDISPLAY BOX

General Purpose Hand Tools-Screwdriver DisplayScrewdriver Sets

• Pro style PVC handles• Chrome Vanadium shafts• Magnetic tips• Hex Bolsters on larger drivers• 8 Red Slotted, 5 Yellow Phillips, 3 Purple Stardrivers,

5 Forest Green Nutdrivers and 1 Purple Tack Puller• Packed in sturdy tray for easy toolbox organization

CONTAINS EACH OF THE FOLLOWING:3/8" X 8" 1/4" X1-1/2" 5/16" X 6" 3" X NO. 1 PHILLIPS1/4" X 4" 4" X NO. 2 PHILLIPS3/16" X 3" 1-1/2" X NO. 2 PHILLIPS

• Orange high visibility pro-style handles• Heat treated alloy steel shafts• Magnetic tips


• 22-1/2” overall length for hard to reach areas• 2- color plastic & rubber comfort grip handles• Chrome vanadium steel shafts with magnetic tips• Contains: #2 Phillips, #3 Phillips 1/4” Slotted

LONG SHAFT 3 PIECE SET

22 PIECE SET

8 PIECE SET

MFG. NO.W3893

PART NO.456-4046

MFG. NO.W80022

PART NO.456-4048

MFG. NO.W901S

PART NO.456-4041

MFG. NO.W924

SCREWDRIVER DISPLAY

• PRO-STYLE HANDLES• MAGNETIC TIPS• HEAT TREATED ALLOYSTEEL SHAFTS

CONTAINS: #1 AND #2PHILLIPS, INCLUDING MECHANICS, CABINET,ELECTRICIAN ANDGENERAL ALL-PUR-POSE SCREW-DRIVERS.

50 PC. MIXED SLOTTED AND PHILLIPS.

PART NO.456-4051

MFG. NO.W901D

•3/16” & 1/4” Slotted, #1& #2 Phillips, T-15 & T-20 Star, S2 SquareForward, Reverse andLock Chrome VanadiumSteel Contruction.

NEW! HI-TORQUE RATCHETINGSCREWDRIVER WITH BITS

PART NO.456-448

SOLD 12UNITS PER

DISPLAYBOX

TOOLS

575

TOOLS

General Purpose Hand Tools-Specialty Pick & Screwdriver SetStardriver Set, T-Handle Hex Key Set

Pry Bar Set, Magnetic Tray


MAP NO.456-4042

• Magnetic tips• High visibility handles• Contains: Curved Hook, Offset 45º Hook,

90º Hook, Straight Pick, 1/8” Slotted screwdriver, #0 Phillips screwdriver, T-15 & T-20 Stardrivers

MFG. No.W941

8 PC. SPECIALTY PICK & SCREWDRIVER SET

4 PC. PRY BAR SET

MAGNETIC TRAY

MAP NO.456-4045

5 PC. STARDRIVER SET• Pro style purple PVC handles• Chrome Vanadium shafts with

magnetic tips• Sizes: T-10, T-15, T-20,

T-25 & T-30• Packed in sturdy tray for easy

tool box organization

MFG. NO.W80025

MAP NO.456-4044

• 5 SAE & 5 Metric sizes• Heat treated alloy steel shafts• T-grips add comfort & torque• Bonus storage tray

MFG. NO.W80277

10 PC. T-HANDLEHEX KEY SET

MAP NO.456-4043

• Drop forged steel• Black finish• Contains: 8”, 12”, 18” & 24” sizes

MFG. NO.W2020

MAP NO.456-4640

• Stainless steel construction• Keep small metal parts & tools from loss• Even works sideways or upside-down

MFG. NO.W1264

NEW!3-1/2 Lb. MAGNETICRETRIEVER • Extends to 25"• Heavy duty magnetic tipretrieves objects

up to 3 ½ pounds• Handy pocket clip

MAP NO. MFG. NO.456-4040 W1254

NEW!SPECIALTY PICK SET • Hardened tips• Knurled center grips• Great for retrieving small

parts, nuts, etc.• Contains 90 double end

scribe for etching Metals and soft materials

• Use to easily remove and install O-rings/Seals

MAP NO. MFG. NO.456-447 W80750

576

TOOLS

TOOLS

Vise-Grip Locking Pliers

VISE-GRIP LOCKING PLIERSSTRAIGHT JAWS WITHOUT WIRE CUTTER

LOCKING "C" CLAMP

CURVED JAWS WITHOUT WIRE CUTTER

CURVED JAWS WITH WIRE CUTTER

LONG NOSE LOCKING PLIERS WITH WIRE CUTTER 6LNMODEL6LN

CHAIN CLAMP 20R

PART NO.456-3001456-3003

LENGTH10"7"

MODEL10R7R

JAWADJ.1 1/4"1 1/8"

JAWTHICK.

5/8"7/16"

WEIGHTEACH16 OZ.14 OZ.

PART NO.456-3019456-3017

LENGTH11"6"

MODEL11R6R

JAWADJ.3 3/4"

2"

THROATHEIGHT

3 3/4"2"

THROATDEPTH

2 5/8"1 1/2"

WEIGHTEACH28 OZ.

7 1/2 OZ.

PART NO.456-3011456-3013

JAWTHICK.

3/8"5/15"

JAWADJ.1 7/8"1 5/8"

WEIGHTEACH16 OZ.12 OZ.

LENGTH10"7"

MODEL10CR7CR

PART NO.456-3005456-3007456-3009

MODEL10WR7WR5WR

LENGTH10"7"5"

JAWADJ.1 7/8"1 5/8"1 1/8"

JAWTHICK.

3/8"5/16"1/4"

WEIGHTEACH16 OZ.12 OZ.6 OZ.

NORMALLENGTH

6"

JAWLENGTH

1 3/4"

WEIGHTEACH6 OZ.

JAWTHICK.1/8" ATTIPS,

5/16" ATBASE

JAW ADJ.

OPENS TO2 1/4" AT

TIPS, 1" ATBASE

PART NO..456-3014

MODEL6LN

WEIGHTEACH27 OZ.

MODEL20R

PARTNO..

456-3027

CHAINLENGTH

19”

TOOLS

577

TOOLS

Vise-Grip Locking Bar ClampsCombination Wrench Sets, Prosnip Offset Snips

Convertible Snap Ring Pliers, Fence Pliers

VISE-GRIPLOCKING

BAR CLAMPS

* CLAMP ITEMS TOO LARGE FOR REGULAR C-CLAMPS.

* JAW ADJUSTS 0-10", 0-18" IN LARGER SIZE.* SELF-LEVELING SWIVEL PADS.* ADJUSTABLE CLAMPING PRESSURE.* EASY LOCKING AND QUICK-RELEASE ACTION.* SELF-ENERGIZING, ADJUSTABLE JAWS.

PROSNIP OFFSET SNIPS• EASIER TO USE THAN CON

VENTIONAL METAL SNIPS• CUTS IN THREE

DIRECTIONS• FORGED STEEL BLADES• EXCLUSIVE WIRE CUTTER• COMFORTABLE CURVED

HANDLE• KEEPS HANDS SAFELY

ABOVE CUT MATERIAL• RIGHT OR LEFT CUTTING

INCLUDES TIP KIT OF FIVE COLOR CODED PAIRS OF TIPSIN SIZES .036, .047 AND .070 STRAIGHT AND BENT 90° INA SMALL DURABLE PLASTICPOUCH WITH HEX WRENCH.

PUSH BUTTON CONVERTIBLE TO ORFROM EXTERNAL AND INTERNAL ACTION.

EXTERNAL RING SIZES: 1/4 THRU 2" / 10MM THRU 8MMINTERNAL RING SIZES: 3/8 THRU 2" / 7MM THRU 48MM

CONVERTIBLE SNAP RING PLIERSINTERNAL AND EXTERNAL REPLACEABLE TIP FENCE PLIERS - TOOLS

FOR USE ON METAL OR WOOD POSTS, WITH NOOTHER TOOLS NEEDED. HEAVY LOCK-JOINT CON-STRUCTION WITH OVAL FACED JAWS. STARTING ANDPULLING POINT IS ON ONE JAW, CORRUGATED HAM-MER HEAD ON THE OTHER. GOOD STAPLE PULLERAND LUG LIFTER - WIRE STRETCHER IN BACK OFJOINT. WIRE CUTTER ON EACH SIDE WILL CUT DOU-BLE STRAND BARBED WIRE. HIGHLY POLISHED HEADWITH GUN METAL HANDLES, KNURLED GRIP.

FULLY DROP FORGED ALLOY TOOL STEEL, TEMPERED AND HARDENED. POLISHED HEADS. PVC CUSHIONED GRIP HANDLES. COMES WITH CORRUGATED HAM-MER HEAD, PULLING POINT, STAPLE PULLER, WIRESPLICER, WIRE CUTTERS, WIRE STRETCHER.

LENGTH14-3/8”

PART NO.456-3126

SIZE0 - 10”

MFG. NO310S

DEPTH2-5/8”

PART NO.456-3202

LENGTH9” RH

MFG. NO20SR

CUTCAP.

2”

PART NO.456-1234456-1236

MFG. NO.1234

14

DESCRIPTIONCOMPLETE PLIER

REPLACEMENT TIP KIT

CRESCENT FENCE PLIERS

IMPORT FENCE PLIERS

LENGTH10"

MFG. NO.193410V

PART NO.456-4551

LENGTH10-3/4"

PART NO.456-211

NEW! HEAVY DUTY C-CLAMPS• Helpful for compressing brake caliper pistons• Heavy duty malleable iron construction• Tough enamel finish• Carded for pegboard displayMAP NO. SIZE MFG.NO.456-4162 3" W206C456-4163 4" W207C456-4164 5" W213C456-4165 6" W214C456-4166 8" W215C

578

TOOLS

TOOLS

Impact WrenchAir Ratchet, Air Ratchet Set23 Inch Tool Box & Tray, 4-Way Lug Wrenches

PART NO.456-4300

MFG. NO.M558DB

• 1/2" drive• Built in air regulator• Well balanced design

PART NO.456-4310

MFG. NO.M564DB

Contains:• 3/8" drive air ratchet• 7 impact sockets: 3/8" - 3/4"• 3" extension• 3" impact screwdriver bits• 3" bits extension• Universal joint• Storage case

PART NO.456-4301

MFG. NO.M560DB

• 3/8" drive• Easy to use• Many uses in auto service

work and light duty assembly

IMPACT WRENCH

AIR RATCHET

13 PC. AIR RATCHET SET

NEW! PROFESSIONAL IMPACTSOCKET SETS

SAE 3/8" Drive 8 pc.Deep Impact Socket Set Pegboard Theft Resistant Packaging Contains sizes: 3/8", 7/16", ½", 9/16",5/8", 11/16", 3/4", and 13/16"

MAP NO. MFG.NO.456-4302 M594DB

NEW!METRIC 3/8"DriveDeep Impact Socket Set Pegboard Theft Resistant PackagingContains sizes: 10, 11, 12, 13, 14, 16, 17& 19 MM


TOOLS

579

TOOLS

NEW!SAE ½" Drive Deep ImpactSocket SetPegboard Theft Resistant PackagingContains sizes: 3/8", 7/16", ½", 9/16",5/8", 11/16", 3/4", 13/16", 7/8", 15/16",& 1"


NEW!METRIC ½" Drive Deep ImpactSocket Set Pegboard Theft Resistant PackagingContains sizes: 10, 11, 12, 13, 14, 16,17, 19, 21, 22, & 24 MM


NEW! SAE 8 PC. ¾" Drive ImpactSocket Set Pegboard Theft Resistant PackagingPackaged in Metal BoxContains sizes: 1-1/16" thru 1-1/2"

MAP NO. MFG.NO.456-4306 M790

NEW! SAE 8 PC. ¾"Drive Deep ImpactSocket Set Packaged in Metal BoxContains sizes: 1-1/16" thru 1-1/2"

MAP NO. MFG.NO.456-4307 M791

NEW! SAE 11 PC. ¾"Drive TruckImpact Socket Set Packaged in Metal BoxContains sizes: ¾" thru 1-1/2" and 13/16"Square

MAP NO. MFG.NO.456-4308 M792

Socket Sets

580

TOOLS

TOOLS

AIR IMPACT WRENCHES

NEW!AIR HAMMER KIT WITH 5 CHISELS • For general repair work, cutting andexhaust system work• Built-in air regulator-3000 Blows permin-1/4"NPT inlet• 3/8"Hose ID-90 PSI-4 CFM• Quick change spring safety retainer• Includes 5 heat treated chisels

MAP NO. MFG.NO.456-4313 M668

NEW!AIR OPERATED 1/4" DIE GRINDER • For detail work and finishing• Variable Speed Throttle• 1/4"Collet-22000 RPM-1/4"NPT Inlet-

3/8"Hose I.D.• 90 PSI-6 CFM

NEW! 3/8" DRIVE IMPACT WRENCH • Our most economical 3/8" drive pistolgrip impact wrench• Built-in air regulator-8000 rpm-125 lbstorque-1/4"NPT Inlet• 3/8" I.D. Hose- 90 PSI-3 CFM• Well balanced design for easy use -right or left handed

MAP NO. MFG.NO.456-4309 M621

NEW!½" DRIVE IMPACT WRENCH • Medium powered impact wrench• Built-in air regulator-7,000 RPM-280LBS torque-1/4"NPT inlet• 3/8" Hose I.D.-90 PSI- 4 CFM• Well Balanced Design

MAP NO. MFG. NO.456-4311 M623

NEW!¾" DRIVE IMPACT WRENCH • Built-in air regulator• 4200 RPM-700 LBS Torque-1/4"NPTInlet• 3/8" Hose I.D.-90 PSI-7 CFM

MAP NO. MFG.NO.456-4312 M627


Impact WrenchImpact Hammer

TOOLS

581

TOOLS

4-WAY LUG WRENCHES23 INCH TOOLBOX & TRAY

• Blade holder in lid protects 7 1/4" saw blade from being dulled or damaged

• Tray handle holds set of 3/8" sockets, pencils, blades and more

• Deep lift-out tray has 322 cubic inches of storage and is compartmanted for heavy duty sockets or hand tools

• Side pockets in box hold Tuff-Tainer storage boxes, cords and more

• 2100 cubic inches of usable storage• Lifetime warranty

MAP NO.847-1404

MFG NO.23802

MAP NO.456-4631

DESCRIPTION20" 4-WAY LUG WRENCHCHROME PLATEDFOR 3/4", 13/16", 7/8" & 19MM

25" 4-WAY LUG WRENCHCHROME PLATEDFOR 7/8", 15/16", 1" & 1 1/16"

MFG. NO.W-1

MFG. NO.W-11

NEW!AIR OPERATED UTILITYCUT-OFF TOOLGreat for cutting many types of sheetmetal, fiberglass,bolts, muffler clamps,etc. Complete with metal blade guard.20,000 RPM-3/8"Arbor Hole-1/4"NPTInlet-3/8"Hose I.D. 90 PSI-4 CFM

MAP NO. MFG. NO.456-4314 M563DB

AIR TOOLS

MAPT NO.456-4632

NEW!AIROPERATED4" ANGLEGRINDER For manycleaning,de-burring and smoothing applications• Side handle for easier handling• 12000 RPM-4" Wheel Dia-1/4" NPT

inlet-3/8"Hose I.D.• 90 PSI-6 CFM

MAP NO. MFG.NO.456-4316 M658

NEW!PRODUCTION SPRAY GUN • For automotive, marine and shop painting applications• 1000 cc spun aluminum siphon cup• 1.8mm Needle and Nozzle set• 8-10" Spray Pattern-1000cc cup capacity-3/8"NPS Fluid Inlet• ¼"NPS Air inlet-3/8"Hose ID-up to 70PSI-up to 12 CFM


Air Cutting ToolSpray Gun

4-Way Lug Wrench

582

TOOLS

TOOLS

Battery TesterAnti-Freeze TesterFilter Wrenches, Bench Vise

MAP NO.374-820374-821

MFG. NO.W1666CW1667C

MAP NO.374-840374-841

MFG. NO.W1655CW1656C

ANTI-FREEZE TESTERS

BATTERY TESTERS

• HARDENED STEELINSERT JAWS.

• POSITIVE DUALLOCKING SWIVELBASES

• PERMANENT PIPE JAWS

• EXTRA LARGE ANVIL• DURABLE BLACK

FINISH

PACKED 1 TO A SHIPPING CARTON

Lifetime Warranty!

HEAVY DUTY SWIVELOIL FILTER WRENCHES

LARGE 3 1/2” TO 3 7/8”

MAP NO.422-27

MFG. NO.W177C

HEAVY DUTY BENCH VISES

MAP NO. MFG NO. SIZE456-4202 MV-4 4" Jaws456-4203 MV-5 5" Jaws456-4205 MV-6 6" Jaws

SMALL 2 7/8” TO 3 1/4”

MAP NO.422-26

MFG. NO.W187C

Head rotates 360 for standard or pipejaw vise operation• Head locks automatically• Dual lock down with 360 base rotation

MAP NO. MFG.NO.456-4204 MV-10

NEW!HEAVY DUTY MULTI VISES

Available in either Pocket Style or Dial Type. Pocket style has color coded balls for easy readings.Dial type with large dial face will detect overcharges,will test all 6 and 12 volt systems, and hot or cold

Available in either Pocket Style or Dial Type.Pocket style has color coded balls for easyreadings. Dial type has large scale and pointerfor accurate readings.Measures freezing pointfor winter and boiling point for summer. Dialtype is also calibrated in C and F.

TOOLS

583

Hydraulic Bottle JacksHydraulic Service Jacks

Jack Stands

ALL HYDRAULIC JACKS & JACK STANDS ARE CONSTRUCTED WITH QUALITY MATERIALSAND WORKMANSHIP AND WILL GIVE YOU MANY YEARS OF TROUBLE FREE USE.

HYDRAULIC BOTTLE JACKS• ADJUSTABLE TOP SCREW• HEAVY DUTY BASE• YELLOW IN COLOR

PART NO.457-2320457-2321457-2322457-2323457-2324457-2325

MFG.NO.W1621W1623W1625W1628W1632W1633

LIFT RANGE7 1/8" - 13 1/2"7 5/8" - 14 5/8"8 1/2" - 16 1/4"

9" - 17 7/8"9 1/4" - 18 1/2"9 1/2" - 18 3/8"

DESCRIPTION2 TON HYD. BOTTLE JACK4 TON HYD. BOTTLE JACK6 TON HYD. BOTTLE JACK8 TON HYD. BOTTLE JACK12 TON HYD. BOTTLE JACK20 TON HYD. BOTTLE JACK

HYDRAULIC SERVICE JACKS• HEAVY DUTY CONSTRUCTION• LONG FRAME DESIGN• YELLOW IN COLOR

PART NO.457-2326

457-2327

MFG.NO.W1612

W1617

LIFT RANGE5" - 19 1/4"

5 1/2" - 21 1/4"

DESCRIPTION2-1/2 TON (5000 LB. CAPACITY)SERVICE FLOOR JACK3 TON (6000 LB. CAPACITY)SERVICE FLOOR JACK

JACK STANDS• LEVER ACTION FOR EASY ADJUSTMENTS• WIDE HEAVY DUTY BASE• DUCTILE IRON SADDLE AND PAWL• YELLOW IN COLOR

PART NO.457-2339457-2340457-2341

MFG.NO.W41021W41022W41023

LIFT RANGE11 1/4" - 16 3/4"

DESCRIPTION2 TON JACK STANDS3 TON JACK STANDS6 TON JACK STANDS(1 PAIR)

ALL HYDRAULIC JACKS AND JACK STANDS ARE WARRANTY TO BE FREE FROM DEFECTS IN MATERIALSAND WORKMANSHIP UNDER NORMAL USE AND SERVICE. FREE REPLACEMENT ON PRODUCTS WITHIN 90DAYS FROM DATE OF PURCHASE, AFTER 90 DAYS AND UP TO 1 YEAR REPLACEMENT AT NO CHARGE ANYPARTS TO BE DEFECTIVE AND UNDER WARRANTY.

TOOLS

584

TOOLS

TOOLS

ALL HYDRAULIC JACKS & JACK STANDS ARE CONSTRUCTED WITHQUALITY MATERIALS AND WORKMANSHIP AND WILL GIVE YOU MANY

YEARS OF TROUBLE FREE USE.

NEW!2 ¼ TON TROLLEY JACK WITH CASE • 4500 LB Capacity• 5-1/4" to 15-1/2" Lift Range• Heavy Duty Construction• Clean and Easy storage with plastic case

MAP NO. MFG.NO.457-2329 W1611

NEW!3 TON RAPID LIFT FLOOR JACK Rapid Lift feature allows you to quicklyraise jack into position under the vehicle • 6,000 LB Capacity• 4-5/8" to 19-3/4" Lift Range

MAP NO. MFG. NO.457-2328 W1616

Note: Repair Kits and parts are available for all hydraulic jacks and liftequipment. Please call our customer service department for details.

NEW!ROLL-AROUND STOOL WITH TOOL TRAYAdjustable, swivel seat with pin lock design easilyadjusts to 6 positions from 17" to 23"• Convenient 15" diameter tool tray• Shielded 2" swivel casters allow easy 360 movement• Fully padded seat cushion• 2" replacement caster assembly

MAP NO. MFG.NO.457-2600 W85009

Floor JacksRoll-Around Stool

TOOLS

585

CreeprsCalipers-Electronic Digital, Dial

Lufkin Tape Measure-Carded

ELECTRONIC DIGITAL

Features:•Larger LCD window, larger digits and

high contrast for easy reading•No display of invalid zeroes •Glass window instead of plastic•Attractive blue colored LCD display with

color coded soft buttons •Complete on/off switch•Chip board sealed into plastic readout

box to be dust and waterproof

Features:•6" Dial caliper for sae & metric measurements•Single revolution .100", reading .001"•Covered rack, thumb roll•stainless steel•Attractive case•Made in China

PART NO.456-5001

DIALCALIPERS

PART NO.456-5000

LUFKIN TAPE MEASURE - CARDED

PART NO. SIZE MFG. NO.455-45854 1/4" X 10' 45854

TOOLS

NEW! 36" 4 CASTER LOW BOY CREEPER

• 36" x 17" x 3 ½" Creeper Size• Powder coated, heavy duty, tubular steel frame• Shielded 2-1/2" swivel casters allow easy 360 movement• Fully padded deck with cushion headrest• 2-1/2" Replacement caster assembly

NEW!C FRAME CREEPER SEAT • Heavy duty, tubular steel design formaximum strength• Convenient 11-1/2" x 12-1/2" tooltray• Shielded 2-1/2" swivel casters alloweasy 360 movement• Fully padded seat cushion• 2-1/2" Replacement caster assembly

MAP NO. MFG.NO.457-2602 W85007

MAP NO. MFG.NO.457-2601 W85004

457-2602

457-2601

586

TOOLS

TOOLS

Tape Measures

PART NO.455-45200455-45205455-45210

SIZE5/8” x 12’3/4” x 16’1” x 25’

MFG.NO.412416425

• Nylon coated steel blades lasts up to 10 times longer than other coatings.• Blade tip has 3 rivets for long life on 16’, 25’.• Thick high carbon steel blade insures a minimum of 7.5 foot blade

extension on 1” blades.• Impact-resistant case construction designed ergonomically for comfort

and strength.• Top control SPEED LOCK holds blade securely.• Superior internal mechanism provides smooth operation.• Durable steel belt clip.• Available in chrome or yellow cases

TM

PART NO.455-45220455-45225455-45227*455-45230

SIZE5/8” x 12’3/4” x 16’1” x 25’

1” x 25”/7.5m

MFG.NO.491249164925

4925IM

Chrome Case Yellow Case

* Inch/Metric Graduations

TAPE MEASURES

DURA NY-Coat K-74 SERIES POWER TAPESTM

OPEN REEL FIBERGLASS TAPE• Exclusive 2 color printed blade-white for inch scale, yellow for engineering scale• Heavy-duty construction• High impact-resistant yellow ABS frame• Fiberglass tape will not rot, corrode or distort• Numbers and graduations are printed in black• Comfortable rubber hand grip• Withstands over 440 pounds of pulling force• Non-conductive material protects user from electrical shock• Resists stretching, even in extreme temperatures• Blade hooks firmly allowing one person to measure easily and accurately

PART NO.455-45242

SIZE1/2” x 100’

MFG.NO.6611

ABS CLOSED CASE FIBERGLASS TAPES• Fits comfortably in hand• High impact resistant ABS case• Fiberglass blade will not, corrode or distort• Numbers and graduations are painted in black on both two sides for easy reading• Reinforced leader and plated steel end hook• Blade hooks firmly allowing one person to measure easily and accurately

PART NO.455-45250455-45252

SIZE1/2” x 50’

1/2” x 100’

MFG.NO.350

3100

TOOLS

587

TOOLS

587

Nicholson Files-Mill FilesHalf Round Files, Round Files

Chain Saw Files-Round Smooth, Tungsten Point File

NICHOLSON FILES

CHAIN SAW FILES - ROUND SMOOTH

TUNGSTEN POINT FILETUNGSTEN POINT FILES ARE FOR DRESSING DISTRIBUTOR POINTS THATARE TIPPED WITH TUNGSTEN, IRIDIUM AND SIMILAR METALS. FILES ARE 51/4 INCHES OVERALLAND DOUBLE CUT. CHISEL TIP OFFILE ENTERS SLOTS OR GAPS EASILY. APPROXIMATESIZE 5/16"/8MM X .044"/1.10MM.

PRINCIPAL USE IS TO FILE CIRCULAR OPEN-INGS OR CONCAVE SURFACES. TAPEREDSLIGHTLY TOWARDS POINT. ALL 6", 8" 10"FILES ARE SINGLE CUT, 12" ARE DOUBLE CUT.

THIS NEW ROUND SMOOTH CHAIN SAW FILE IS APRODUCT OF EXTENSIVE RESEARCH AND DEVELOPMENT IN THE ENGINEERINGLABORATORIES OF NICHOLSON. FIELD TESTS BY

CHAIN SAW USERS AND COMPETITIVE TESTS BYMANY LEADING CHAIN SAW MANUFACTURERSPROVE THAT THE NEW ROUND SMOOTH CHAINSAW FILE IS THE SMOOTHEST-FEELING, FASTEST-CUTTING AND BEST-FINISHED.

FOR SHARPENING MILL OR CIRCULAR SAWS. ALSO FORDRAW-FILING AND FINISHING METALS. ALL SIZESTAPERED SLIGHTLY IN WIDTH, 12" AND 14" SLIGHTLY IN THICKNESS FOR ABOUT ONE-THIRD OF LENGTH. TWO SQUARE EDGES. SINGLE-CUTON SIDES AND EDGES.

ROUNDED ON ONE SIDE. FLAT ON THE OTHER. USED ON CONCAVE AND CONVEX AS WELL AS FLAT SURFACES. BACKS OF ALL HALF ROUND BASTARDFILES ARE DOUBLE-CUT. THE FLATSIDES OF ALL HALF ROUND FILES ARE DOUBLE-CUT.

SIZE6"8"

10"12"

PART NO.455-11716455-11904455-12019455-12134

MFG. NO.11716119041201912134

PKG.1212126

SIZE6"8"

10"12"14"

PART NO.455-08354455-08497455-08642455-08737455-08832

MFG. NO.0835408497086420873708832

PKG.12121266

PKG.126

MFG. NO.0499505094

SIZE10"12"

PART NO.455-04995455-05094

PART NO.455-01576455-01609455-01753455-01876455-01964

MFG. NO.0157601609017530187601964

SIZE1/8" X 6"

5/32" X 6"3/16" X 8"7/32" X 8"1/4" X 8"

PKG.1212121212

Continued on next page.

PKG.12

MFG. NO.02373

SIZE5-1/4”

PART NO.455-02373

MILL FILES

HALF ROUND FILES

ROUND FILES

588

TOOLS

TOOLS

Nicholson Files-Taper Files-SlimTaper Files-Extra SlimMetal Ferruled Handles

TAPER FILES - SLIMNICHOLSON FILES

TRIANGULAR SAW FILES ARE MADE FOR FILING ALL TYPES OF SAWS WITH 60°ANGLE TEETH. SINGLE CUT. EDGES SET AND CUT FOR FILING GULLETS BETWEENSAW TEETH.

TAPER FILES - EXTRA SLIM

METAL FERRULED HANDLESMADE FROM SEASONED WHITE BIRCH WITH NICKEL

PLATED FERRULES. SHELLAC FINISH.

Hornet 1/4" thick wheels fea-ture 2-1/2 layers of reinforc-

ing.

PART NO.455-14224455-14290

PKG.1212

LENGTH6"8"

WIDTH11/32"15/32"

MFG. NO.1422414290

NO.123

FILE SIZE10" - 12"

8"6"

PKG121312

MFG. NO.214852149421503

PART NO.455-21485455-21494455-21503

Hornet Delivers!• Performance

Hornet outcuts and outlasts any wheel in it's class!

• QualityWheel after wheel, Hornet has proven to be one of Brilliant's most consistent quality products!

• ValueAmong competitive priced wheels on the market, Hornet is by far a superior value.

PART NO.455-14698

PKG.12

LENGTH7”

WIDTH5/16”

MFG. NO.14698

Hornet Depressed Center Grinding WheelsDIMENSION DIA. X THICKNESS

X ARBOR4" x 1/4" x 5/8"

4-1/2" x 1/4" x 7/8"4-1/2" x 1/4" x 5/8"-11

7" x 1/4" x 5/8"-119" x 1/4" x 5/8"-11

MFG. NO.

2161021613216142162021622

QTY.

2525201010

TYPE

GP27GP27GP27GP27GP27

PART NO.

466-1250466-1251466-1252466-1253466-1254

Hornet Chop Saw Blades

GP27 - General PurposeXFC - General Purpose, Extra Fast Cutting (1-ply reinforcing)

DIMENSION DIA. X THICKNESSX ARBOR

12" X 3/32" x 1"14" X 3/32" x 1"

MFG. NO.

2051121505

QTY.

1010

TYPE

XFCXFC

PART NO.

466-1255466-1256

TOOLS

589

TOOLS

4 1/2' Angle GrinderKnife and Tool Sharpener

Scissors Sharpener

4 1/2" ANGLE GRINDER

DescriptionSupplied with 1 grinding wheel, 1 specialwrench, 1 protective wheel guard, 1 extra pairof carbon brushes, and handle for right or lefthand grinding.

Specifications• Plastic body ,metal wheel guard.• Overall length: 11 inches• 4 1/2" disc / bore 16 mm• Spindle thread: M10• Speed: 10,000 RPM-NO LOAD• Voltage / frequency: 110 Volt / 60 HZ Motor• Power: 450 Watts• 90 day warranty - Damage caused by abuse,

usage, or alteration, or accident is not covered.

KNIFE AND TOOL SHARPENERFinally, a Knife Sharpener anyone can use! No more messy oilsor stones. In about 10 seconds, you can sharpen knifes (evenserrated knifes), cleavers, axes, hoes, and many other cuttingtools. The large handle fits either hand safely and securely. Thefull length guard protects fingers. Sharpening blades areDiamond Honed Tungsten Carbide and provide years of reliableuse. AccuSharp will not rust and can be cleaned with soap andwater, or in the dishwasher. Replacement sharpening blades areavailable. Sportsmen, Cooks, Craftsmen, Gardeners and manymore, all need the easy-to-use, affordable AccuSharp Knife andTool Sharpener.

PART NO.450-1707

ShearSharp is an amazing device designed to take the mys-tery out of sharpening your general purpose scissors, hedgeclippers, tin snips and the like. The large handle fits eitherhand safely and securely. The full length guard protects fin-gers. Sharpening blades is Diamond Honed Tungsten Carbideand provide years of reliable use. ShearSharp will not rustand can be cleaned with soap and water, or in the dishwash-er. If you own a pair of scissors, you will want to have theeasy-to-use, affordable ShearSharp Scissors Sharpener.

SCISSORS SHARPENER

Place this display on your sales counter, this display will giveyour customer an opportunity to try the AccuSharp before theybuy it, and you know that once they try it, They buy it!

Replacement blades

PART NO.462-1

MFG. NO.50100

PART NO.450-1706

PART NO.450-1709

PART NO.450-1708

Call for detail on how toreceive diplay free.

590

TOOLS

TOOLS

Hacksaw Frames and BladesBolt Cutters

NO. 2012

LENNOX "HACKMASTER 2" BLADES

MAP NO.456-20110456-20111456-20116456-20117

100 to Bulk Box

Sold Individually

REF. NO.20110-018HE20111-024HE20116-218HE20117-224HE

LENGTH, WIDTH, & THICKNESS10" X 1/2" X .02510" X 1/2" X .02512" X 1/2" X .02512" X 1/2" X .025

TEETH18241824

LENNOX "HACKMASTER"HEAVY-DUTY ALUMINUM HANDLE HACKSAWFRAME WITH 12" / 300MM BI-METAL BLADE.PACKED ONE PER BOX

MAP NO.456-20912

MECHANICS QUALITYIMPORT HEAVY DUTY HACKSAW FRAME

EXTRA STURDY PISTOL GRIP FRAME.ADJUSTABLE FOR 8", 10" AND 12" BLADES.FRAME COMPLETE WITH 12" BLADES.

MAP NO.456-1222

HACKSAW FRAMES AND BLADES

BOLT CUTTERS

Ruggedly built all-purpose forged steel boIt cutters are ideal for cutting concrete reinforcing rods, medi-um tensile and soft bolts, rods, rivets, bars, chains, cables, etc. Versatile short cutting edge to accom-modate chain links. Hold-firm rubber grips. Built to last.

MAP NO. MFG.NO. DESCRIPTION456-9173 BC-18 18"Bolt Cutter456-9180 BC-24 24"Bolt Cutter456-9190 BC-30 30"Bolt Cutter456-9193 BC-36 36"Bolt Cutter

TOOLS

591

TOOLS

NEW!DELUXE TUBULAR HACKSAW • Adjusts to accommodate standard8,10,12" Blades• Heavy Duty Tubular Frame• Molded aluminum handle with handguard

MAP NO. MFG.NO.456-1230 W730

NEW!PROFESSIONAL HEAVY DUTY HACK-SAW • Die cast handle• Blade can be positioned for 45 or 90angle cutting• Uses standard 12" blades• Can be used as a versatile keyhole saw

MAP NO. MFG.NO.456-1232 W732

NEW!RETRACTABLE UTILITY KNIFE • Heavy duty all metal construction• Retractable blade adjusts to 3 positions• Extra blade included (stored in handle)

MAP NO. MFG.NO.450-1701 W745C

NEW!5 PC. REPLACEMENT UTILITYKNIFE BLADESBlades fit W745C knife and many others.

MAP NO. MFG.NO.450-1702 W744

Hacksaw Frames and Blades

592

TOOLS

TOOLS

Punches-Pins PunchesExtra Long Pin PunchesCenter Punches, Lining Up Punches

PUNCHES

ALL PUNCHES ARE 6" LONG.

CAREFULLY HAMMER FORGED OF HIGH GRADESTEEL, HARDENED AND TEMPERED.

BLACK LACQUER .

PIN PUNCHES

EXTRA LONG PIN PUNCHES

LINING UP PUNCHES

MAP NO. MFG. NO. TOOL NO. POINT DIA.STEEL456-1641 21001 413 3/32" 5/16"456-1642 21002 413 1/8" 5/16"456-1643 21003 413 5/32" 5/16"456-1644 21004 413 3/16" 3/8"456-1646 21100 414 3/16" 1/2"456-1647 21011 413 7/32" 1/2"456-1648 21103 414 1/4" 1/2"

CENTER PUNCHES

CENTER PUNCHESHAMMER FORGED OF HIGH GRADE STEEL.

HEADS AND POINTS POLISHED. BLACKLAQUER FINISH

MAPNO.456-1712456-1713456-1714

MFG. NO.240012400224003

TOOLNO.415415416

DIA. STEEL5/16"3/8"1/2"

LENGTH

4-1/4"5"6"

ALL PUNCHES ARE 9" LONG

MAP NO. MFG. NO. TOOL NO. POINT DIA.STEEL456-1657 21502 443 1/4" 3/8"456-1658 21503 443 5/16" 7/16"456-1659 21504 443 3/8" 1/2"

MAP NO.456-1681456-1684456-1687456-1688456-1689

MFG. NO.2201122003220062200722008

TOOL NO.466458461462463

POINT5/32”1/4”

3/16”1/4”

5/16”

LENGTH8”

12”12”14”16”

TOOLS

593

TOOLS

Chisels, Punches & Tools-Pilot PunchesCold Chisels, Extra Long Cold Chisel

Pinch Bars, Rolling Head Bar

FOR REMOVAL OF ROLL OR SPRING PINSPILOT PUNCHES

PAT.NO. 3,099,876

THESE PILOT PUNCHES HAVE BEEN CAREFULLY DESIGNED:• TO SPEED UP PIN REMOVAL, SAFELY• TO CENTER PERFECTLY OVER PIN• TO ELIMINATE DAMAGE TO PIN OR WALL OF HOLE• TO DRIVE PIN COMPLETELY THROUGH HOLE WITHOUT

STICKING PUNCHTWELVE SIZES MATCH ALL STANDARD PIN DIAMETERS AND MAXIMUM LENGTHS

CHISELS, PUNCHES & TOOLSPART NO.456-2001456-2002456-2003456-2004456-2005456-2006456-2007456-2008456-2009456-2010456-2011456-2012

MFG. NO.250002500125002250032500425005250062500725008250092501025011

TOOLNO.112-1112-2112-3112-4112-5112-6112-7112-8112-9112-10112-11112-12

SIZE

1/16"5/64"3/32"1/8"5/32"3/16"7/32"1/4"5/16"3/8"7/16"1/2"

COLD CHISELS

COLD CHISELS ( HEAVY DUTY)MAYHEW HAMMER - FORGED CHISELS. MADE OF HIGH GRADE STEEL. NOTED FOR CUTTING QUALITY AND DURABILTY. BLACK LACQUER FINISH. HEADS AND BITS FULLY POLISHED.

PART NO.456-1402456-1403456-1404456-1405456-1406456-1407456-1408

MFG. NO.10201102021020510209102121021610220

TOOL NO.70707070707070-1

DIA. STEEL5/16"3/8"1/2"5/8"3/4"7/8"1 X 7/8"

LENGTH5"5-1/2"6"6-1/2"7"8"8"

EXTRA LONG COLD CHISEL NO. 110 EXTRA LONG COLD CHISELSHAMMER FORGED FROM HIGH GRADE STEEL.

NOTED FOR CUTTING AND DURABILITY. BLACKLACQUER FINISH. PART

NO.456-1490

MFG. NO.10213

TOOLNO.110-3/4"

DIA. STEEL5/8"

LENGTH

12"

PART NO.456-1561456-1562

MFG. NO.4000040001

TOOLNO.468469

DIA. STEEL1/2"5/8"

FORGED FROM HIGH GRADE STEEL. HARDENED AND TEMPERED BLACK LACQUER FINISH. FULL POLISHED TAPER ANDBLADE. FOR PRYING, ALIGNMENT WORK ANDMANY OTHER PURPOSES. ONE END TAPER ANDOTHER END CURVED LEVERAGE BLADE.

PINCH BARS

LENGTH

14"16"

PART NO. MFG. NO. DIA. STEEL LENGTH456-1565 40102 5/8" 18"

ROLLING HEAD BAR A PRY AND ALIGNING BAR WITH A LONG POINTED TAPER AND 90° ROLLING HEAD. IDEAL FOR ALIGNING HOLES.ROLLING HEAD AND LONG HANDLE PROVIDE TREMENDOUS LEVERAGE. ESPECIALLY USEFUL FOR PRYING IN LIMITED CLEARANCE AREAS, SUCH AS BEHIND GEARS. HOT FORMED FROM ALLOY STEEL AND HEAT TREATED FOR EXTRA STRENGTH.

594

TOOLS

TOOLS

Chisels & Punches-Line-Up Punch KitPilot Punch Kits36 Pc. Pilot Punch Display, No. 1 Punch/Chisel Display

TOOL MFG. NO. SIZECOLD

CHISEL70

1/2", 5/8", 3/4"

CENTER PUNCH

416 1/2"

LINE UP PUNCH

466 5/32"

PIN PUNCH 4133/32", 1/8", 3/16", 1/4"

SOLID PUNCH

400 3/16"

CONTAINS 3 EACH OF THE FOLLOWING TOOLS:

This 4-piece Line-up Punch Set contains 1/8", 5/32", 3/16", and 1/4" line-up/driftpunch. Made from high quality chrome vanadium steel, these All-Americanmade tools are hardened & tempered their entire length for maximum durability.These are just the tools you need for aligning the holes in metal pieces throughwhich rivets, pins or bolts are inserted. And they come packaged in a rugged,heavy duty plastic pouch.

PART NO.456-2035

12 PIECE1 EACH OF SIZES

1 THRU 12(1/16”-1/2”)

6 PIECE 1 EACH OF SIZES

4 THRU 9(1/8”-5/16”)

LINE-UP PUNCH KIT

NO. 1 PUNCH / CHISEL DISPLAY CONTAINS 30 FAST SELLING TOOLS

PART NO.456-2033

CHISELS & PUNCHES

KIT NO.125-K

PILOT PUNCH KITS

36 PC. PILOT PUNCH DISPLAY

COUNTER OR PEG-BOARD DISPLAY

3 EACH OF ALL SIZES 1 THRU 12.

DISPLAY BLOCK 10" X 4 1/2" X 1 5/8"COMPLETE WITH REMOVABLE HANGERS FOR PEG-BOARD USE. A PRINTED PRICE STRIP WITHSTOCK NUMBER, SIZE, AND PRICE OF EACH ITEMATTACHED TO DISPLAY.

PART NO.456-2031

KIT NO.106-K

PART NO.456-2032

KIT NO.112-K

DISPLAY NO.112-D

PART NO.456-1746

MFG. NO.80219

TOOLS

595

TOOLS

751K Punch & Chisel KitScrew Extractor Set

Open Stock Screw Extractors

6 TOOLS PACKED IN PLASTIC POUCH

751K PUNCH & CHISEL KIT

SCREW EXTRACTOR SET

OPEN STOCK SCREW EXTRACTORS

THE FIVE MOST USED SCREW EXTRACTORS IN AHANDY, SEE-THROUGH PLASTIC KIT OF TOUGH AND LAST-ING VINYL.SET INCLUDES: 474-1101,1102,1103,1104 & 1105.

PART NO.456-1742

WEIGHT: 2 LBS. 4 OZ.

QTY.

111111

TOOLNO.7070

413413400415

MFG. NO.

102051020921002210042000224002

SIZE

1/25/81/8

3/163/163/16

NAME

COLD CHISELCOLD CHISEL

PIN PUNCHPIN PUNCH

SOLID PUNCHCENTER PUNCH

MFG. NO.73215

PART NO.474-1215

PART NO.474-1101474-1102474-1103474-1104474-1105474-1106474-1107

MFG. NO.73101731027310373104731057310673107

SHANK SIZE3/16"3/16"1/4"

5/16"3/8"

7/16"1/2"

BOLT SIZE1/4" & 5 /16"

3/8"7/16"

1/2" & 9/16"5/8"

3/4" & 7/8"1"

DRILL SET1/8"

3/16"15/64"5/16"3/8"

7/16"1/2"

596

TOOLS

TOOLS

Eklind Fold-Up Hex Key Sets Inch and MetricFold-Up Torx Key Set, Fold-Up Screwdriver Set

METRIC SIZES

EKLINDFOLD-UPHEX KEY SETSINCH AND METRIC

SNAPS TO WORKPOSITION FORLEVERAGE. USE ATANY ANGLE.

FOLDS UPLIKE AKNIFE

MADE IN

USA

FITS NEW-TYPERECESSED SCREWSIN LATE-MODEL CARS ANDAPPLIANCES.

FOLD-UPTORX KEY SET

STOP SEARCHING FOR THE RIGHT SIZE HEX KEY.CHOOSE FROM SIX HANDY FOLD-UP SETS, EACH WITH A SERIES OF HEX KEY SIZES. KEYS ARE TOPQUALITY 8650 CHROME NICKEL ALLOY STEEL, DRAWNTO A TOLERANCE OF +.000-.001, WITH SQUARE-CUT,AND SHARP HEX CORNERS FOR PRECISE FIT TO HEXSOCKETS. PRECISION HARDENED AND TEMPEREDFOR EXTRA TORQUE.

FOLD-UPSCREWDRIVER SET

NEW COMBINATION TOOL WITH FIVE SCREW DRIVERBLADES IN ONE COMPLETE UNIT WHICH FOLDS LIKE APOCKET KNIFE. ALL BLADES MADE FROM HIGH QUALITYSTEEL, HARDENED AND TEMPERED. EACH BLADE CANBE USED STRAIGHT OUT OR AT RIGHT ANGLES FOREXTRA LEVERAGE. EACH UNIT CONTAINS ONE EACH-NO. 1 PHILLIPS TYPE, 1/4, 3/16, AND 1/8 IN. FLAT BLADEAND ONE 3/16 IN. HOLE PUNCH AWL.

SEVEN MOST POPULAR TORX KEYS IN ONE CONVENIENTHANDLE ELIMINATES SEARCHING FOR THE RIGHT SIZETOOL. EACH KEY CAN BE USED STRAIGHT OUT OR ATRIGHT ANGLES FOR EXTRA LEVERAGE. THE U.S. MANUFACTURED EKLIND TORX KEY SET OFFERS THESEVEN MOST USED SIZES: T-10 THROUGH T-40. THEYARE MADE OF TOP QUALITY CHROME NICKLE ALLOYSTEEL, PRECISION MACHINED AND HARDENED FOR LONGLIFE AND PRECISE FIT.

USESTRAIGHT, OR ATRIGHT ANGLESFOR EXTRALEVERAGE

DESCRIPTION

#81 (small) .050, 1/16,5/64, 3/32, 7/64, 1/8,

9/64, 5/32#91-S (small) .050,

1/16, 5/64, 3/32, 7/64,1/8, 9/64, 5/32, 3/16

#91 (medium) 5/64, 3/32, 7/64, 1/8, 9/64,

5/32, 3/16, 1/4#51 (large) 3/16, 7/32,

1/4, 5/16, 3/8

PART NO.

456-1301

456-1302

456-1303

456-1304

HANDLE

LENGTH3"

3-5/8"

4-1/4"

5-1/4"

HANDLELENGTH

3-5/8"(92.1 MM)

5-1/4"(133.3 MM)

DESCRIPTION

# M-17 (small) 1.5, 2,2.5, 3, 4, 5, 6 MM

# M-15 (large) 4, 5, 6, 8, 10 MM

PART NO.

456-1310

456-1311

DESCRIPTION

7 Torx Keys in 1 HandleT-10, T-15, T-20,

T-25, T-27, T-30, T-40

PART NO.

456-1308

HANDLELENGTH

4-1/4"

DESCRIPTION

5-IN-1 SET

PART NO.

456-1325

HANDLE LENGTH

3-5/8"

TOOLS

597

TOOLS

METAL BOXED SETS

15 KEYS, SHORT ARM SERIES, INCH SIZES:.028, .035, .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64,5/32, 3/16, 7/32, 1/4, 5/16, 3/8. WEIGHT 3.0 LBS.

18 KEYS, SHORT ARMS SERIES, INCH SIZES: .028, .035, .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16,3/8, 1/2, 9/16, 5/8. WEIGHT 3.4 LBS.

HEX KEYS AND SETSOPEN STOCK

SHORT ARM

MADE FROM ALLOY STEEL, HEAT TREATED, OILQUENCHED AND TEMPERED. IDENTIFICATION

SIZE AND USA STAMPED ON EACH KEY.

LONG ARM

9 PIECE LONG ARM SET

18 PIECE HEX KEY SET

UTILITY SETSHORT SIZES: . 050" - 7/32".

LONG SIZES: 1/16" - 5/16"

9 PIECE LONG SETLONG SIZES: 5/64" -3/8"

IDEAL FOR THE REFRIGERATION AND OIL BURNER TRADES WHERE EXTRA

LENGTH IS REQUIRED.

PART NO.456-5481

MFG. NO.86819

SIZE5/8"

MFG. NO.88031

PART NO.456-5141

PART NO.456-5461456-5471

MFG. NO.8681786818

SIZE1/2"

9/16"

MFG. NO.88029

PART NO.456-5660

MFG. NO.88030

PART NO.456-5662

MFG. NO.88038

PART NO.456-5201

Hex Key Sets

598

TOOLS

TOOLS

Hanson Drill Bits-Open Stock, High Speed Steel Drill13-Pc. High Speed Drill SetImported Drill Bit Assortment, Titanium Drill Bit Assortment

DRILLCO DRILL BITS

PART NO.474-514

IMPORTED DRILL BIT ASSORTMENT

29-PC. HIGH SPEED DRILL SET

FRACTIONAL SIZES1/16" THRU 1/4" FOR1/4" CHUCKS

POPULAR SET IN YELLOW UNBREAKABLE HINGED PLASTICCASE BLISTER CARDED (8-1/2" W X 7" H) FOR PEGBOARD DIS-PLAY. CONTAINS 13 FULL JOBBERS LENGTH HIGH SPEEDSTEEL DRILLS IN STRAIGHT SHANK 601 SERIES, SIZES: 1/16 ,5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16,13/64, 7/32,15/64 &1/4".

FULL JOBBER LENGTH(STRAIGHT-SHANK) POLISHED.COMPLETELY INSERTED IN AMETAL INDEX. SIZES: 1/16" THRU1/2" IN 64THS. BOXED.


HIGH SPEED STEEL DRILL1/2" REDUCED SHANK6" OVERALL LENGTH

SILVER AND DEMING TYPE DRILLS FOR DRILLIG33/64" THRU 1-1/2" CHUCK. THREE "FLATS" HOLDDRILL SECURELY IN CHUCK. ALLSIZES 6" OVERALL LENGTH.

OPEN STOCKJOBBERS LENGTH, HIGH SPEED STEEL DRILLS, FRACTIONAL SIZES -STRAIGHT SHANK THE MOST POPULAR SIZES FOR GENERAL USE INMETAL OR WOOD. SIZES THRU 1/4" IN SHELF PACK ENVELOPE OF 10EACH: SIZES 17/64" THRU 1/2" STANDARD. PACKAGED IN CARDBOARDTUBE.

TITANIUM DRILL BIT ASSORTMENT


FULL JOBBER LENGTH(STRAIGHT-SHANK) POLISHED.COMPLETELY INSERTED IN AMETAL INDEX. SIZES: 1/16" THRU1/2" IN 64THS. BOXED.

PART NO.474-520

PART NO.474-4474-5474-6474-7474-8474-9

474-10474-11474-12474-13474-14474-15474-16474-17474-18474-19474-20474-21474-22474-23474-24474-25474-26474-27474-28474-29474-32

MFG. NO.601046010560106601076010860109601106011160112601136011460115601166011760118601196012060121601226012360124601256012660127601286012960132

SIZE1/16"5/64"3/32"7/61"1/8"

9/64"5/32"11/64"3/16"

13/64"7/32"

15/64"1/4"

17/64"9/32"

19/64"5/16"

21/64"11/32"23/64"

3/8"25/64"13/32"27/64"7/16"

29/64"1/2"

PART NO.474-134474-136474-138474-140474-142474-144474-146474-148474-150474-152474-154474-156474-158474-160474-162474-164

SIZE17/32"9/16"

19/32"5/8"

21/32"11/16"23/32"

3/4"25/32"13/16"27/32"

7/8"29/32"15/16"31/32"

1"

MFG. NO.90134901369013890140901429014490146901489015090152901549015690158901609016290164

MFG. NO.60134

PART NO.474-504

TOOLS

599

TOOLS

Brooms-Street BroomPlastic Street Push Broom

Floor Broom, Warehouse Broom, Wisk Broom

BROOMS

WISK BROOM

WIDE FLARE ON ENDS ALLOWS CLOSE SWEEPING TO CURBS. FOR WET OR DRY SWEEPING IN DAIRY BARNS, STREET SWEEPING, HIGHWAY WORK, ETC.

STREET BROOMPALMYRA STALK STREET PUSH BROOMS. SPECIALLY TREATED PALMYRASTALK. STAPLE SET IN SMOOTH SANDED HARD-WOOD BLOCK. LENGTH OFTRIM: 6 1/4 INCHES. PACKED 6 PER CARTON.

PART NO.

452-1027452-1304

DESCRIPTION

BROOM (LESS HANDLE)THREADED HANDLE

SIZE

16" WIDE15/16" X 5'

PLASTIC STREET PUSH BROOMBROWN POLYPROPYLENE PLASTIC. STAPLE SET IN SMOOTH SANDEDHARDWOOD BLOCK. LENGTH OF TRIM: 5 1/2 INCHES. PACKED 6 PERCARTON.

PART NO.

452-1032452-1728

DESCRIPTION

BROOM (LESS HANDLE)TAPERED HANDLE

SIZE

16" WIDE1-1/8" X 5'

FLOOR BROOM

INDIVIDUALLY PACKED

BLACK PLASTIC BRISTLES. STAPLE SET IN CLEAR LACQUERED HALF-ROUND HARDWOOD BLOCK. FOR WET ORDRY SWEEPING ROUGH OR SEMI-SMOOTH CONCRETE, WOOD,ASPHALT, ETC. LENGTH OF TRIM: 3 1/8 INCHES.

PART NO.

452-1053

SIZE

24" WIDE

DESCRIPTION

FLOOR BROOM W/ HANDLE

MADE OF BEST QUALITY SELECTED BROOM CORN. REINFORCED WITH COARSE FIBRE. SEWED 4 TIMES. REINFORCED WITH A WIRE BAND. MADE ON A HEAVY DUTY HANDLE. THIS BROOM WAS DESIGNED FOR SWEEPING SMOOTH AND ROUGH SURFACES HAVING MODERATE AND HEAVY DIRT ACCUMULATIONS. PACKED 12 PER BUNDLE.

PART NO.

452-1101

DESCRIPTION

WAREHOUSE BROOM

WAREHOUSE BROOM

MADE OF SELECTED FINE BROOM CORN. SEWED TWO TIMES. CADMIUM PLATED RING CAP. THIS IS BEST QUALITY WHISK BROOM FOR HOME, OFFICE AND AUTOMOBILE. OVERALL LENGTH: 11 INCHES PACKED12 PER CARTON.

PART NO.

452-1110

DESCRIPTION

WISK BROOM

600

TOOLS

TOOLS

Braces, Handles, and BrushesWire Brushes

BRACES, HANDLES, AND BRUSHES

WIRE BRUSHES

CURVED HANDLE WIRE SCRATCH BRUSHES

ROUND CARBON STEEL WIRE. STAPLE SET INSMOOTH WAX. TUMBLED HARDWOOD BLOCK.

PART NO. BLOCK SIZE: 452-1310 14 INCHES LONG X 1INCH WIDE

LENGTH OF TRIM: 1 1/8 INCHESPACKED 12 PER CARTON

SHOE HANDLE WIRE SCRATCHBRUSHES

FILLING MATERIAL IS STAPLE SET IN SMOOTHWAX. TUMBLED HARDWOOD BLOCK. BLOCKSIZE: 10 INCHES LONG X 1 INCH WIDE .LENGTH OF TRIM: 1 1/8 INCHES

PART NO. NO. OF ROWS452-1303 4 ROWS X 16 ROWS

PACKED 12 PER CARTON.

WOOD THREADED HANDLESFOR REGULAR LINE FLOOR BRUSHESSELECTED HARDWOOD WITH CLEAR LACQUERED FINISH. ONE END ROUNDED &OTHER END THREADED TO FIT STANDARDFLOOR BRUSH BLOCKS. DIAMETER: 15/16"PACKED 12 PER CARTON.

PART NO. LENGTH 452-1304 5 FT.

WOOD TAPERED HANDLESFOR DECK, WINDOW & ROOF BRUSHES, SQUEEGEES, STREET BROOMS, ETC. MADE OF NO.1 STRAIGHT-GRAIN HARDWOOD SMOOTHLYSANDED WITH ONE END ROUNDED AND THE OTHEREND TAPERED. DIAMETER: 1 1/8 INCHES PACKED 12 PER CARTON

PART NO. LENGTH 452-1728 5 FT.

HANDLES

HEAVY DUTY HANDLE BRACE, COMPATIBLE WITH ALLHANDLES, PROMOTING LONGER HANDLE LIFE. MADEOF ALUMINUM BAR STOCK. COMPLETE WITH ALLSCREWS AND WING NUTS.

PART NO.452-1742

NO. 99 BRACE

HEAVY DUTYHANDLE BRACE

TOOLS

601

TOOLS

Emory ClothFlashlight, Batteries

Flashlights by Garrity, Safety Goggles

• SAFETY EYE GUARD• CLEAR OPTICAL PLASTIC• VENTILATED FOR COMFORT• PROTECTS AGAINST DUST, SPARKS, ETC.• CAN BE WORN OVER EYEGLASSES

INDUSTRIAL HEAVY DUTYRUBBER FLASHLIGHT

• Advanced Santoprene Thermoplastic Rubber Housing• 50% Brighter Krypton Bulb• Chemical, Impact And Shock Resistant• Uses 2-D Cells Or Heavy Duty Power (Shown At Right)

FLASHLIGHT BATTERIESPOWERSHOT BATTERY

• Replaces 2 Individual D Cells• Quicker Cartridge Loading Action• 3-Volts - 2-Cell Alkaline Power

EMORY CLOTH

TUFF LITE®

• 100% Heavy Duty Rubber• Lifetime Warranty• Includes Eveready Batteries• Waterproof• Super Bright Krypton Bulb

MINI TUFF LITE®

• 100% Heavy Duty Rubber• Lifetime Warranty• Includes Eveready Batteries• Waterproof• Super Bright Krypton Bulb

MFG. NO.7232

PART NO.800-300

MFG. NO.CV-RBR20G

PART NO.800-301

High Quality Utility Cloth Packaged 50 Yards Per Box. 1" Width.

PART NO.456-2251456-2253456-2254456-2255

DESCRIPTION 100 GRIT180 GRIT280 GRIT400 GRIT

FLASHLIGHTS BY

MFG. NO.6009FB

PART NO.800-303

MFG. NO.6015FB

PART NO.800-304

SAFETY GOGGLES

DESCRIPTIONSafety Goggles (Indirect Vent)

Plastic Safety Goggles

PART NO.752-8110752-8111

602

TOOLS

TOOLS

HINGES

Hinges-Full Mortise Hinges, Bolt HooksStrap HingesHinge Hasps, Screw Hooks

FULL MORTISE HINGESPLATED

BOLT HOOKSPLAIN STEEL

STRAP HINGESPLAIN STEEL

1970BOLT HOOKS

1973SCREW HOOK & STRAP

HINGE WITHOUT SCREWS

1804LIGHT NARROW

RIVETED PINWITHOUT SCREWS

PART NO. SIZE 675-27681 5/8" X 8" 675-27701 3/4" X 10"

PART NO.675-27781675-27801675-27841

SIZE8"

10"14"

PART NO.675-21961

SIZE 3” X 3”

HINGE HASPSPLATED

1911SAFETY HASP

WITHOUTSCREWS

1915LOOSE STAPLESAFETY HASP

WITHOUT SCREWS

PART NO. SIZE 675-26651 2-1/2"

PART NO.675-27001675-27021675-27041

SIZE3-1/2"4-1/2"

6"

STRAP HINGESPLATED

PART NO.675-25691675-25711675-25731675-25751675-25771

SIZE 4"5"6"8"

10"

1902HEAVY STRAP

WITHOUTSCREWS

SCREW HOOKSPLAIN STEEL

1974SCREW HOOK

PART NO.675-28021675-27961675-27981

SIZE1/2" X 4"5/8" X 5"3/4" X 6"

TOOLS

603

TOOLS

Electrical Tape, Duct TapeStrapping Tape, Teflon Tape

Masking Tape, Carton Sealing Tape, Tape Dispenser

ELECTRICAL TAPE DUCT TAPE

TAPE DISPENSER

CARTON SEALING TAPE

MASKING TAPE

FOR USE WITH 802-7 CARTON SEALING TAPE.

EASY HANDLING AND UNIFORM QUALITY MAKE THIS TAPE AN EXCELLENT ALL PURPOSE ELECTRICALTAPE FOR THE HANDYMAN OR FOR THEPROFESSIONAL. COLOR BLACK7 MILS THICK. U.L. APPROVED.

UNPLASTICIZED PVC BACKING WITH CREEP-RESISTANT RUBBER BASED ADHESIVE. EXCELLENT RESISTANCE TOAGING, WEATHER, OILS AND SOLVENTS.

PART NO.802-2

PACKED10

SIZE3/4” X 60 FT.

POLYETHYLENE COATED CLOTH. WATER-PROOF PRESSURE SENSITIVE TAPE WITH A VERYHIGH TACK LEVEL. A STRONG, FLEXIBLE, ALL PURPOSE DUCT TAPE. ( STANDARD GRADE, COLOR SILVER)

PART NO.802-8

PACKEDBULK

SIZE2” X 60 YDS.

CLEAR

PART NO.802-9

STRAPPING TAPEMONO-DIRECTIONAL STRAPPINGOR FILAMENT TAPE. GLASS

REINFORCED POLYESTER BACKEDTAPE WITH EXCELLENT STRENGTHAND GOOD ADHESION.

PART NO.802-3

802-10

PACKEDBULKBULK

SIZE1” X 60 YDS.

3/4” X 60 YDS.

TEFLON TAPECHEMICALLY INERT, WITHSTANDS ALKALIES, ACIDS, OILS, AND SOLVENTS. TEMPERATURE RANGE: -400° F. TO + 600° F. CAN BE USED ON IRON, STAINLESS STEEL, COPPER, BRASS, PLASTICS, GLASS AND SYNTHETIC RUBBER.

PART NO.802-11

PACKEDBULK

SIZE1/2” X 520”

AN EXCELLENT ALL PURPOSE, GENERALINDUSTRIAL MASKING TAPE OFFERING ABALANCE OF QUICKSTICK, PANELADHESION AND HOLDING PROPERTIES.

PART NO.802-7

PACKED6

SIZE2” X 55 YDS

PART NO.802-5802-6

PACKED124

SIZE3/4” X 60 YDS2” X 60 YDS

604

TOOLS

TOOLS

Plastic TarpsTarp StrapsCorrugated Bin Boxes

PLASTIC TARPS

TARP STRAPSAMERICAN MADE

SOLD 50/BOX

SPECIAL FEATURESTear proof, will not rip as ordinary tarpaulin. Three times stronger than 8 oz. duck tarpaulin.Washable - wipes clean with a damp cloth. Light weight tarp approx. 4.5 oz. per square yard.Rust-resistant grommets approximately 3 feet apart for tying down. Rope is sewn into hem to assure strength of edges. Corner patches for extra strength.

SIZE8' X 12'9' X 12'

10' X 12'10' X 15'10' X 20'12' X 12'12' X 16'16' X 20'18' X 24'

PART NO.758-1104758-1105758-1107758-1109758-1111758-1116758-1117758-1126758-1127

MAKES NEAT BINS FOR BOLTS, PIPEFITTINGS AND MANY OTHER ITEMS.

PRICED AND PACKAGED 50 PER BUNDLE

PLEASE ORDER IN BUNDLE QUANTITIESNOTE: WHEN QUANTITY OF ONE IS ORDERED, YOU WILL RECIEVE A BUNDLE OF 50.

CORRUGATED BIN BOXES

PART NO.805-15805-19805-21805-31

LENGTH15"19"21"31"

SIZES12" X 2" X 4-1/2"12" X 4" X 4-1/2"12" X 6" X 4-1/2"

12" X 12" X 4-1/2"

PART NO.802-255802-256802-257802-259

IMPORTSOLD 100/BOX

PART NO.435-2510435-2511435-2531

LENGTH15"21"31"

TOOLS

605

TOOLS

Particle MaskWork Gloves-Split Cowhide, Brown Jersey, Plastic Dot

Leather Drivers, Welders, Nitrile Gloves, PVC Coated Chemical Resistant

3M BRAND NONTOXIC PARTICLE MASK

PROVIDES COMFORTABLE PROTECTION AGAINST NUISANCE DUSTS AS DEFINED BY OSHA.

MASK FILTER OFFERS MINIMAL BREATHING RESISTANCE. THE WORKER FEELSCOOL AND COMFORTABLE WHILE STOPPING IRRITATING NUISANCE DUSTS.STRAP EXERTS LESS FORCE AGAINST HEAD THAN ANY COMPETITIVE MASK.

LIGHTWEIGHT, ONLY 1/7 OF AN OUNCE.

WORK GLOVES

SPLIT COWHIDE PLASTIC DOTBROWN JERSEY

9 OZ BROWN COTTON JERSEYGLOVE WITH KNIT WRIST.

SOLD IN BUNDLE QUANTITIES UNLESS OTHERWISE NOTED.

PART NO. PACKED752-102 12 PER BUNDLE

• COTTON FABRIC BACK• ELASTIC WRIST STRAP• SAFETY CUFF• PALM LINING

KNIT WRIST WITH THUMB ANDBACK OF INDEX FINGER DOUBLEREINFORCED WITH PLASTIC DOTS.

Chemical resistant Nitrile Gloves bringpeace of mind when working with most liq-uids - solvents, alcohols, acids, caustics,oils and fats. Unlike rubber or neoprenegloves, Nitrile Gloves won't weaken or swellin most petroleum solvents.

PART NO.752-107

PACKED12 PER BUNDLE

NITRILE GLOVES

PART NO.752-108

PACKED12 PER BUNDLE

PVC COATED CHEMICAL RESISTANT

PART NO.752-110

PACKED12 PER BUNDLE

LEATHER DRIVER’S

PART NO.752-104752-105752-106

SIZEMediumLarge

X-large

• KEYSTONE THUMB

PACKED12 PER BUNDLE

WELDERS

PART NO.752-103

• Russet color• Reinforced straight thumb• Kevlar sewn• Sold by the pair

PARTICLE MASK

MFG. NO.8500

PART NO.752-8500

PKG. QTY. 50

PART NO.752-109

PACKED12 PER BUNDLE

606

TOOLS

TOOLS

Igloo Water Coolers400 Series

759-5702759-5701

• FLIP-SPOUT DESIGN FOR EASY POURING OR SIPPING.• SLIM-GRIP DOMED LID MAKES OPENING AND CLOSING EASY.• EASY TO CLEAN LINER RESISTS STAINS AND ODORS.•WIDE-MOUTH OPENING MAKES FILLING AND CLEANING A SNAP.•SWING-UP BAIL HANDLE FOR COMFORTABLE CARRYING.• ULTRATHERM FOAM INSULATED TO KEEP DRINKS COLD LONGER.• FLIP SPOUT IS DESIGNED WITH SIDE FINGER GRIPS TO PRO-MOTE

CLEANLINESS.

WATER COOLERS

DESCRIPTION

1/2 GALLON PITCHER / JUG1 GALLON JUG WITH FLIP SPOUT

3 GALLON INDUSTRIAL WATER COOLER- YELLOW5 GALLON INDUSTRIAL WATER COOLER- YELLOW10 GALLON INDUSTRIAL WATER COOLER- YELLOW

PART NO.

759-5702759-5701759-5703759-5705759-5710

MFG. NO.

22262206431451

4101

759-5710759-5705759-5703

• ALL PLASTIC RUST PROOF CONSTRUCTION• HIGH QUALITY ULTRATHERM INSULATION TO HOLD THE COLD LONGER.• PLASTIC DRIP-PROOF, RECESSED PUSHBUTTON SPIGOT• PURE WHITE PLASTIC LINER• WIDE MOUTH PRESSURE FIT LID WITH MOLDED-IN CONTOUR HANDLE• HEAVY DUTY SIDE HANDLES, REINFORCED FOR STRENGTH (5 & 10 GAL. MODELS) • REINFORCED BAIL HANDLE (3 GAL. MODEL)• "DRINKING WATER" IMPRINT MEETS OSHA

REQUIREMENTS

400 SERIES

TOOLS

607

TOOLS

Rubber Feed Buckets Heavy DutyRubber Trailer Mat Heavy Duty

PVC Walk Mats

RUBBER FEED BUCKETSHEAVY DUTY

RUBBER TRAILER MATHEAVY DUTY

• HEAVY DUTY FLOOR MATS ARE PERFECT FOR TRAILERS, STALLS, WALKWAYS AND WASHDOWN AREAS.• RUBBER SURFACE PROVIDES SAFE FOOTING AND ABSORBS SHOCK.• EASY TO CLEAN SURFACE REDUCES BEDDING COSTS AND CUTS CLEANING TIME.• MATS CAN BE INSTALLED OVER ANY SURFACE AND ARE EASILY TRIMMED FOR A CUSTOM FIT.• CHANNELED BOTTOM KEEPS MOISTURE AWAY AND HELPS PREVENT ROTTING AND BUILDUP.• HIGH QUALITY MATS ARE PRECISION CUT TO ENSURE TIGHT FIT.

• DURABLE - FLEXIBLE - VERSATILE• LAST 2 TIMES LONGER THAN PLASTIC BUCKETS &

FEEDERS• CHROME PLATED HANDLE ON BUCKETS• PRECISION MOLDED • MANUFACTURED FROM RECYCLED RUBBER

PRODUCTS

DESCRIPTIONTHREE QUART FEEDERTHREE GALLON FEEDERSIX & HALF GALLON FEEDER

DESCRIPTIONEIGHT QUART PAILTWELVE QUART PAILEIGHTEEN QUART PAILEIGHTEEN QUART PAIL FLAT SIDE

PART NO.235-704235-705235-706235-707

PART NO.235-701235-702235-703

DESCRIPTION4' X 6' X 3/4" RUBBER TRAILER MAT

PART NO.235-710

PVC WALK MATS• COMFORTABLE, DURABLE, TOUGH PVC MATERIAL.• ATTRACTIVE EASY TO CLEAN NON-SLIP SURFACE.• FOR HOME, WORK, OR ANYWHERE YOU STAND.• ENGINEERED FOR PROPER LEG AND BACK SUPPORT.• PROTECTS FLOORS AND CARPET FROM DAMAGE.• PROTECTS TOOLS FROM DAMAGE IF THEY FALL.

DESCRIPTION2' X 3' PVC COUNTER WALK MAT2' X 5' PVC COUNTER WALK MAT

PART NO.354-1354-2

608

TOOLS

TOOLS

Utility ScoopUtility PanTrough-O-Matic Automatic Float Valves

TROUGH-O-MATIC AUTOMATIC FLOAT VALVESThe Miller "Little Giant" Trough-O-Matic Float Valves are the perfect way to automate the water supply to stock tanks,troughs, and barrells. They are easy to install and have a 375 gallon per hour capacity. The one piece plastic floatis blow molded from durable polyethylene and is maintenance free. Trough-O-Matic Float Valves contain adjustablebrackets to control the water level and a reversible neoprene valve seat for longer life.

TM 825 STANDARD PLASTIC TROUGH-O-MATIC FLOAT VALVE• POPULAR RUGGED PLASTIC CASE MOLDED FROM HIGH GRADE POLYSTYRENE FOR ADDED STRENGTH AND DURABILITY• SAFE AND EASY TO USE• ALL PARTS ARE REPLACEABLE• KEEPS OPEN TANKS FILLED WITH FRESH WATER

TM 830 STANDARD ALUMINUM TROUGH-O-MATIC FLOAT VALVE

The easy way to automate stock tanks

PLASTIC UTILITY PAN IS MADE FROM A DURABLEPOLYETHYLENE-POLYPROPYLENE BLEND13 1/2" DIAMETER X 4" HEIGHT

• 7 QUART CAPACITY• EASY TO CLEAN• MULTIPLE USES FOR THE HOUSEHOLD, DOGS,

CATS, AND OTHER ANIMALS.

UTILITY SCOOP UTILITY PAN

HEAVY DUTY UTILITY SCOOP IS A ONE PIECE MOLDEDHANDLE WITH HANGER MADE FROM HIGH IMPACTSTYRENE.

• LIGHT WEIGHT AND BREAK RESISTANT• FOOD HANDLING APPROVED• 5-PINT CAPACITY FOR UNLIMITED USES

MFG. NO.90

PART NO.235-101

MFG. NO.91

PART NO.235-102

PART NO. DESCRIPTION235-103 3/4" GHT VALVE

• DURABLE ALUMINUM CASE WITH BRASS ORIFICE• ALL PARTS ARE REPLACEABLE• EASY TO INSTALL


• SAME AS MODEL TM825 , BUT COMPLIES WITH BASIC BACKSIPHONING REGULATIONS

• ALL PARTS ARE REPLACEABLE• NO TOOLS NECESSARY FOR INSTALLATION

TM825AS ANTI-SIPHON PLASTIC TROUGH-O-MATIC FLOAT VALVE


TOOLS

609

TOOLS

Handles

HOLLOWBACK PATTERN SHOVELHANDLES WITH SHOULDER

BENT PATTERNS LONG SINGLE BENT SHOVEL HANDLES WITH SHOULDER HOLLOWBACK

- 1-1/2" DIAMETER WITH SAW SLOT 9" EYE CHUCK

HANDLESEACH HANDLE IS LABELED TO IDENTIFY THE HANDLE AND ITS PURPOSE. HANDLES WILL

REPAIR TOOLS MADE BY AMES, UNION, TRUE TEMPER, KELLER, AND MANY OTHERS.

STRAIGHT LONG SHOVEL HANDLESWITHOUT SHOULDER

STRAIGHT RAZORBACK STYLEEYE WITH SLOT - 9-1/2" EYE CHUCK

PART NO. LENGTH PCS. CTN. WT. CTN.451-21829 30" 12 20 LBS.

PART NO. LENGTH PCS. CTN. WT.CTN.451-21828 54" 12 24 LBS.


SPADING FORK HANDLES1-1/2" DIA. 5/8" BORE


EYE HOE HANDLE

HOLLOWBACK PATTERN SHOVELHANDLES WITHOUT SHOULDER

LONG SINGLE BENT SHOVEL HANDLES BENTRAZORBACK STYLE, WITHOUT SHOULDER

EYE SLOTTED9-1/2" EYE CHUCK


DESCRIPTION60" EYE HOE HANDLE

PART NO.451-21811

1 3/4" ROUND EYE

DEE SINGLE BENT SHOVELAND SCOOP HANDLES

BENT RAZORBACK STYLEWITHOUT SHOULDER

EYE SLOTTED9-1/2" EYE CHUCK

LIGHTER BEND WITH FERRULE AND SQUARE HOLE CAPS.

DEE SINGLE BENT SHOVELOR SCOOP HANDLES

WITH SHOULDER HOLLOWBACK

WITH SAW SLOT9" EYE CHUCKTUBULAR DEE


You can find all thesetools and more at our

web site:www.modernusa.comMake Modern Ag Parts

Your #1 choice!

610

TOOLS

TOOLS

Grain ScoopHammers-Claw Hammer, Engineers HammersBall Pein Hammers, Double Face Hammers, Sledge Hammers

ENGINEERS HAMMERS

SLEDGE HAMMERSDOUBLE FACED BLACKSMITH SLEDGES

HIGH CARBON STEEL, HEAT TREATED.MACHINED, POLISHED FACE. TOP GRADE HANDLE.

SLEDGE HAMMERS, HEAT TREATED, FULLY DROP FORGED &TEMPERED, FLAME GRAINED HICKORY HANDLE.

D HANDLE ALUMINUM WESTERN GRAINSCOOP WITH POLY GRIP HANDLE

GRAIN SCOOP

HAMMERS

• NO. 10 SIZE• LARGE 14 1/2" X 17 3/4" BLADE• ETCHED FINISH• 27" LACQUERED ASH HANDLE• BIG FIST D-HANDLE POLY GRIP

PART NO.450-1076

CLAW HAMMER

CLAW HAMMER, 16 OZ. NAIL, PAINTEDBELL FACE, CLEAR FINISH HICKORY HANDLE

MFG. NO.1563

PART NO.450-4516

HICKORY HANDLES

BALL PEIN HAMMERS

MFG. NO.15141515151615181519

PART NO.450-5108450-5112450-5116450-5124450-5132

SIZE8 OZ.

12 OZ.16 OZ.24 OZ.32 OZ.

PART NO. MFG. NO. SIZE450-1556 907 2 LBS.450-1557 909 3 LBS.

HEAVY DUTY DOUBLE FACE HAMMER, DROPFORGED, HEAT TREATED, BLACK ENAMELED HEAD WITH POLISHED FACE.

DOUBLE FACE HAMMERS

SIZE2 LBS.3 LBS.4 LBS.

PART NO.450-31102450-31106450-31108

MFG. NO.902903904

SIZE6 LBS.8 LBS.

10 LBS.12 LBS.

PART NO.450-31112450-31114450-31116450-31118

MFG. NO.8906890889108912

TOOLS

611

TOOLS

Axes & Axe HandlesHammer Handles

AXESDROP FORGED STEEL, FLOSSY BLACK FIN-ISH, HEAT TREATED, 1-1/2" HIGHLY POL-ISHED CUTTING EDGE. FLAME FINISH HICK-ORY HANDLES

WIDTH2 1/2 X 1/2

HANDLE LENGTH

36"

SIZE

3-1/2 lbs.

PART NO.

450-30220

MICHIGAN

DOUBLE BIT

WIDTH3 X 1/2

HANDLE LENGTH

36"

SIZE

3-1/2 lbs.

PART NO.

450-30240

PICK MATTOCKWIDTH

1 1/2 X 1/2

SIZE5 lbs.

PART NO.450-30301

CUTTER MATTOCKWIDTH

1 1/2 X 1/2

SIZE5 lbs.

PART NO.450-30307

WIDTH2 1/2 X 1/2

AXE HANDLESFIRE FINISHED-WATERPROOF SEALER. HANDLES ARE FURNISHED WITH WEDGES (WHERE REQUIRED).EXCELLENT HANDLES AT COMPETITIVE PRICES.UNUSUAL SALES APPEAL TOGETHER WITH THE ABILITYTO WITHSTAND HARD SERVICE.

HAMMER SIZE36"36"

PART NO.

451-19100451-19140

TYPE

Single BitDouble Bit

MATTOCK HANDLEWIDTH

2 1/2 X 1/2

HANDLE LENGTH

36"

SIZE

5 to 6 lbs.

PART NO.

451-19220

ENGINEER HAMMERHANDLES WIDTH

2 1/2 X 1/2

PART NO.451-19423

HAMMERSIZE3 to 4 lbs.

LENGTH16"

WIDTH3 X 1

BALL PEIN HAMMERHANDLES

PART NO.451-19403451-19405451-19407451-19415

HAMMER SIZE8 to 12 oz.

16 to 20 oz.24 to 28 oz.32 to 48 oz.

LENGTH12"14"16"

16-1/2"

SLEDGE HANDLE

WIDTH 2 1/2 X 1/2

HANDLE LENGTH

36"

SIZE

6 to 12 lbs.

PART NO.

451-19001

612

TOOLS

TOOLS

PARMAK ELECTRIC FENCERS -BATTERY MODELS

MODEL MAG. 12 U.O.

PARMAK MAGNUM 12 U.O. LOW IMPEDANCE12 volt solid state advanced circuitry. New compact design.Equipped with performance meter that shows condition offence. Low impedance - for livestock or predator control -medium to large pastures. Shocks through wet weeds andbrush. Weatherproof, portable - outdoor model. Use with 12volt storage battery. Charges up to 30 miles. Complete withbattery clamps. UL listed.

PART NO.465-1105

LESS BATTERY

12 VOLT BATTERY OPERATED

PARMAK STANDARD 12 A new addition to the Parmak line of top quality electricfencers. This low cost 100% solid state model is for indoorinstallation. Charges long lengths of fence. Housed in heavydeep drawn steel case with attractive baked enamel finish.Charges up to 15 miles of fence. UL listed.

PART NO.465-1104

LESS BATTERYMODEL STD-12


PARMAK SOLAR-PAKAmerica's first solar powered electric fencer is equipped with the lateststate-of-the-art solar panel. Increased output, longer life. Solar Pak elimi-nated the need of expensive battery replacement or inconvenient charging.For the first time you can have power line convenience in a battery fencer.Solar Pak will operate for 21 days in total darkness. Weatherproof, outdoormodel. Charges up to 25 miles of fence. Complete with 6-volt Gel battery.UL listed.

MAP NO. MFG.NO. DESCRIPTION465-1101 DF-SP-LI 6v Solar-Pak Fence Charger465-1102 66-8116-920 Replacement Panel465-1126 66-8117-901 Replacement 6v Battery465-1128 951 6v Taper Charger


MODEL DF-SP-LI

Parmak Electric Fencers - Battery Models

NEW FOR 2004 FROM PARMAK !DELUXE FIELD 6 VOLT BATTERY OPERATED FENCER• New compact lightweight design • Small to medium pastures• 100% solid-state with increased shock output• Compact-design, weatherproof, portable-outdoor model• Built-in operational light• Uses Ray-O-Vac #641 or equivalent 6v battery• Charges up to 25 miles of fence

MAP NO. MFG.NO. DESCRIPTION465-1111 DFLIUO-2113 Deluxe Field 6v Fencer465-1126 66-8117-901 Replacement 6v Battery

TOOLS

613

TOOLS

Parmak Electric Fencers - Powerline ModelsParmak Parts & Accessories

PARMAK ELECTRIC FENCERS - POWERLINE MODELS

PARMAK SUPER ENERGIZER

The most powerful Parmak model. Low impedance designed specifically for large pastures - single or multi-wire high tensile fences. Advanced solid state circuitryfeaturing Parmak's exclusive built-in performancemeter. Shocks through wet weeds and brush. Ideal forcontrolled grazing of livestock including sheep and predatorcontrol. For indoor installation. Charges over 50 milesof fence. UL listed.

MODEL FM

MODEL SE-2

PART NO.465-1108

110-20 VOLT AC OPERATION

MODEL MARK 6 PART NO.465-1107

PARMAK MULTI-POWER MARK 6Totally redesigned for the 90's. Low impedance for medium tolarge pastures - single or multi-wire high tensile fence.Advanced solid state circuitry featuring Parmak's exclusivebuilt-in performance meter. Shocks through wet weeds and brush. Ideal for livestock and predator control. For indoorinstallation. Charges up to 30 miles of fence. UL listed.


PARMAK FIELDMASTER

The all new low impedance model for small to medium pastures. Advanced solid state circuitry. Shocks throughwet weeds and brush. Built-in operational light. For indoorinstallation. Charges up to 15 miles of fence. UL listed.

PART NO.465-1109


MODEL MAG. 12-SP

Solar powered, uses free energy from the sun. Lowimpedance for maximum power, longer life, no operatingcosts. America's first solid state solar powered electricfencer. Features the latest state-of-the-art solar panel.Solar Pak has all the great Magnum 12 features plus solarpower. Complete with sealed 12 volt Gel battery.Weatherproof, portable outdoor model. Charges up to 30miles of fence. UL listed.

PARMAK MAGNUM 12 SOLAR-PAK 12 VOLT BATTERY OPERATED

MAP NO. MFG.NO. DESCRIPTION465-1106 MAG12SP Magnum Solar-Pak Fencer465-1131 960 Replacement Panel465-1122 66-817-902 Replacement 12v.Battery465-1129 952 12v Taper Charger

614

TOOLS

TOOLS

America's longest and finest line of electric fence equipment

Part No.465-2103

Mfg.No.460

Part No.465-2205

Essential to make spot checks in the field. Tells whetherfence is working and helps locate faults such as opens,short, and partial grounds. Lamp protected by resistor.

Single Lamp Tester

Mfg.No.SNUG-STP-25

SUPER SNUG for T posts. Fits 1.25 & 1.33 lb/ft T posts.Large flange prevents arcing, Solid wire holders takeheavy barbed, electric fence wire and polywire. Snaps onand around post. Molded of high density polyethylene withUV inhibitors for all-weather performance. Yellow

T - Post InsulatorsDesigned to perform with solid state electric fence shockers

Extended Length T - Post InsulatorsDesigned to perform with solid state electric fence shockers

Extends wire1" from post

Part No.465-2206

Mfg.No.SNUG-X5TP-25

EXTENDED LENGTH SNUG for T posts. Extendswire 5" from face of post. Use to sure up saggingfield fence...otherwise same as STP. Yellow

Part No.465-2242

Part No.465-2601465-2602

Part No.465-2603465-2604

Part No.465-2606

Part No.465-2607

WESTERN SCREW-TIGHT for round posts. Dare'snumber one selling insulator. Fits 1/4" to 9/16" diameter posts and 5/8" fiberglass t posts. Extendswire 1" from post. Installs without tools. Adjustablewhile current is "on". High density polyethylene withUV inhibitors. Yellow

Round Post InsulatorsDesigned to perform with solid state electric fence shockers

Mfg.No.1728-25

Wood Post InsulatorsDesigned to perform with solid state electric fence shockers

SNUG 1728 INSULATORS for wood posts. Extends wire1" from post. Flexible base fits round and flat sided posts.Single headed nails supplied, easily removed. Molded ofhigh density polyethylene with UV inhibitors. Yellow

Insulated Spring Gate Handles

'OLD FAITHFUL' High quality, hi-impact styrene insures long andtrouble-free life. Measures 4 3/4" between flanges. All metalparts plated. Heavy stamped steel hook. Enclosed spring stretches 3 1/2" to keep wire taut. Red.

Polytape & PolywireHighly visible, lightweight and easy to use. A combination ofweather resistant polyethylene and strong stainless steelwire conductors.POLYTAPE. Woven of white UV resistant polyethylene andstainless conductor wires. 1/2" wide with five conductors.Install with tape insulators only. Imported

POLYWIRE. White polyethylene cord woven of UVresistant polyethylene with three strands of strong stainless steel wire. Imported

Mfg.No.2334-25

T-Post Insulator

Round Post InsulatorFits 1/4" to 9/16" dia. posts.

Plastic Corner Insulators

Sold 25per bag

Sold 25per bag

Sold 25 per bag

Sold 25per bag

Mfg.No.23272346

Size1/2" x 656'

1/2" x 1312'

Mfg.No.23272346

Length820'

1312'

Mfg.No.2336-25

Fits 1.25 & 1.33 lb/ft T-post

Sold 25per bag

Sold 25per bag

DARE Farm Products

Part No.465-2609

Mfg.No.2769

Use with polywire and steel wire gauges 9thru 18. Molded of strong, non-conductiveresin.

Wire Tightener

Sold 5 per bag

RUB'RGATE soft pliable rubber outer case internally reinforced with semi-rigid, non-conductive vinyl inner tube. This provides a firm grip and acts as an extra layer of insulation. Generous, sensibly spaced flanges allow plenty ofhand room. Large heavy stamped steel plated safety hook.Enclosed spring stretches 3 1/2" to keep wire taut. Yellow.

Insulated Spring Gate Handle

Part No.465-2421

Mfg.No.2356-10

Porcelain Corner InsulatorHeavy duty porcelain corner and end post insulator. Imported

Sold 10per carton

EXTENDED LENGTH SNUG for T posts. Extends wire3" from backside of T posts. Snaps on and around post-insulator faces backwards. Fits 1.25 & 1.33 lb/ft Tposts.

Reverse Extended Length T - Post Insulators

Sold 25 per bag

Electric Fence Equipment

Part No.465-2261

Mfg.No.503

Part No.465-2610

Mfg.No.1247

Part No.465-2231

Mfg.No.WESTERN-RP-25

Part No.465-2222

Mfg.No.BW-KK-10

Sold 10per bag

HEAVY DUTY CORNER KNOB Large flanges. Heavy center section. Large enough to withstand strain of fence wire and offercomplete insulation. Flexible tabs speed installation. Not recommended for high tensile. Molded of high density polyethylene with carbon black for superior UV resistance.Performs in any climate. Black only.

Part No.465-2632

Mfg.No.SNUG-RT-25

PARMAK PARTS AND ACCESSORIES

PULSER 4 PRONG FOR USE IN OTHER BRANDFENCERS REQUIRING 4 PRONG TYPE

MFG. No.66-7125-542

Part No.465-1127

TOOLS

615

TOOLS

Electric Fence Equipment

Part No.465-2615

Part No.465-2617

SNUG SWP INSULATOR for wood posts. Heavier andtougher than the others. Insulator rest on 3/4" nail surface. Won't tear or crack. Flexible base fits round offlat sided posts. Molded of high density polyethylene withUV inhibitors for all weather durability. Complete withnail. Yellow.

Wood Post InsulatorDesigned to perform with solid state electric fence shockers

Wood Post InsulatorDesigned to perform with solid state electric fence shockers

PINLOCK INSULATOR FOR WOOD POSTS. Heavy cross sections withstand the pressure of high tensilefencing. Attached pin, locks and unlocks fence wire. Large flange

prevents 'shorts' and arcing. Molded of high density polyethylenewith carbon black for superior UV resistance. Performs in any climate. Complete with nails. Black

Part No.465-2613

Mfg.No.SNUG-XLSTP-25

EXTRA LENGTH SNUG for t-posts. extends wire 2" fromface of post...otherwise same as STP insulators. Yellow.


T POST TOP'R SAFETY TOP AND ELECTRIC FENCE INSULATOR. Fits all steel T posts, 1.01, 1.25 & 1.33 lb/ft. Protectshorses and other valuable livestock from sharp, jagged T posts tops.Large heavy-duty cap/insulator can be installed with wire holdersfacing front, back, right or left. Molded of high density polyethylene with UV inhibitors for all weather performance. Yellow.


Mfg.No.2027

Mfg.No.16d-25

Porcelain InsulatorsPORCELAIN LINE INSULATORS Produced from speciallyformulated electrical porcelain for superior dielectric andmechanical strength. Imported. Complete with 10d doubleheaded nail and poly washer.

Part No.465-2621

Mfg.No.1360

Electric Fence TesterFIVE-O-LITE. Graduated electric fence tester actually showshow many volts are at the charger or on the fence line.Voltages are plainly marked on the case - 625, 950, 2,000,3,300 and 5,000 volts

Electric Fence Posts

STEP-IN POLY POST. Ideal for temporary electric fencing such as controlled grazing/pasture managment. Lightweight, self-insulating, andconvenient to use. Stong H section post molded of black UV resistantpolypropylene. Eight wire holders for steel wire, poly wire and type up to1 1/2 wide. Spaced 6" to 37" from ground up. Sharp metal spikes end ofpost easliy stepped into hard ground. 48" long.

Gripple In-Line Wire Splice

System Gripple is the easy way to join and tension wire. It can be usedin either of two ways: as an in-line joiner or as an anchor. Inside theGripple wire joiner, each wire moves in one direction only, passing overhigh precision gear-toothed rollers. The moment any load is applied inthe opposite direction, the rollers bite, locking the wires.

Part No.465-2628

Gripple Tensioning ToolA powerful tool in the range, generating over 600lbs ofload. Designed for universal use on all Gripple wire joiners. Ideal for initial tensioning, Repairs and generalmaintenance. For use on smooth wire only.

Mfg.No.2885

Sold 25 per bag

Sold 25 per bag

Sold 10per bag

Sold 25per bag

Sold 10 per bag

Part No.465-2640

High Tension Measuring SpringInstall in each fence line together with strainer. Necessary tokeep wires taut during temperature changes. Use to determinetension on wires. All parts are hot dip galvanized and exceedtype III specifications.

High Tension DisplayAn attractive wooden display that show some ofDare's high tension fence supplies. Comes withboard displaying other high tension productsavailable from Dare. Size 33" x 33". Assembled

Mfg.No.2279

Contact customer service or your territory manager fordetails on how to receive display free.

Part No.465-2618465-2619

Mfg.No.2802-25

2799-25 heavy-duty

Porcelain InsulatorsPORCELAIN LINE INSULATORS Produced from speciallyformulated electrical porcelain for superior dielectric andmechanical strength. Imported. Small and large porcelaininsulator with lag bolt. Use for line and corners.

Sold 25per bag

Part No.465-2614

Mfg.No.2550-25

PINLOCK INSULATOR FOR T-POSTS. Fits 1.25 & 1.33lb/ft posts. Heavy cross sections withstand the pressure ofhigh tensile fencing. Large flange prevents 'shorts' and arc-ing. Molded of high density polyethylene with carbon blackfor superior UV resistance. Performs in any climate. Black


Sold 25 per bag

Part No.465-2612

Mfg.No.2249-25

Sold 25per bag

Part No.465-2611

Mfg.No.SUNG-SWP-25

Extends wire1" from post

DARE Farm Products

Part No.465-2631

Mfg.No.1713

Part No.465-2630

Mfg.No.1703

Strainer HandleUse to tighten strainer no. 1703. Tension measuringscale on handle. Heavy riveted construction. Zinc plated.

Part No.465-2629

Mfg.No.1703

High Tension Wire Strainer/TightenerInstall in fence line to periodically renew tension.Heavy cast cog with spring loaded latch. Hot dip zinccoated frame exceeds type III specifications. No rawuncoated steel edges. Use handle no. 1701 to tighten.

Part No.465-2626465-2627

Mfg.No.28822883

ModelMediumLarge

Size Wire10-14 ga7-11 ga

Part No.465-2623

Mfg.No.2400

616

TOOLS

TOOLS

ELECTRIC FENCE WIRE

FENCE STRETCHERS

MODEL 400

MODEL 405

PART NO. 475-405

* INCORPORATES AN EASYRELEASE HOLDING RATCHET.

PART NO. 475-400

* MAKES FENCE REPAIRS IN HALF THE TIME* FREES HANDS TO WORK WITH THE WIRE* BUILT FOR HEAVY USE* HEAVY GAUGE STEEL CONSTRUCTION* ALL STEEL MAIN RATCHET BAR 1 1/4" WIDE,

5/16" THICK, 24" ACTION * 1,000 LB. PULL* YELLOW ENAMEL FINISH

FIRST QUALITY SILVER BRIGHTGALVANIZED, MEDIUM-HARD

STEEL WIRE.

*Priced and Sold Each

PART NO.465-2305465-2306465-2308465-2307

SIZE14 GA.-1/4 MI.14 GA.-1/2 MI.17 GA.-1/2 MI.17 GA.-1/4 MI.

WEIGHT22 LBS.45 LBS.25 LBS.11 LBS.

REELS PERCASE

2224

Electric Fence Wire

TOOLS

617

TOOLS

THE MOSQUITO MAGNET™“This Isn’t a Gadget, it’s a Science”

The Mosquito Magnet ™

The Mosquito Magnet™ mimics a large mammal by using the patented Counterflow Technology™ to emit a plume of carbon dioxide, heat and moisture, which when com-bined with octenol, is irresistible to mosquitoes, no-see-ums, biting midges, black flies,and sandflies. The Mosquito Magnet™ simultaneously attracts biting insects and vacu-ums the insects into a net where they dehydrate and die. Self-powered by a 20-lb propane tank. No electric killing grid or pesticides are used.

Mosquito Magnet™ ProPART NO.460-1000

Replacement Nets (3 pack)PART NO.460-1002

Tank CoverPART NO.460-1006

How the Mosquito Magnet Attracts Biting Insects

Mosquito Magnet™ LibertyPART NO.460-1001

Replacement Nets (6 pack)PART NO.460-1003

OctenolPART NO.460-1004(6 pack)

PART NO.460-1005(3 pack)

Environmentally friendlyUses no pesticides

No harmful substances released

Entomologists have proven that bloodseeking insects, including mosquitoes, sand fliers (no-see-ums),and black flies, navigate to a hose by following the carbon dioxide emitted from that hose. In fact,researchers have identified the receptors and the particular neuron used to navigate. The patented counter-flow technology inside the Mosquito Magnet™ catalytically produces the proper mix of carbon dioxide,water vapor, and humidity, then emits a plum of carbon dioxide to attract the biting insects. They are drawnto the source of plume where they are vacuumed into a net and desicate. A standard 20-lb (9.1 kilograms)propane tank makes the Mosquito Magnet™ as easy to use as a gas grill. The fuel tank lasts three weeks,burning 24 hours per day. Propane tank not included.

The Mosquito Magnet™ Pro usually controls one acre of land, but more of may be needed if the area isheavily wooded or swampy. The Mosquito Magnet™ Liberty covers 3/4 of an acre.

The Mosquito Magnet™ is best placed between the area that needs protection (patio, pool, porch, restau-rant, etc.) and the insect source, i.e. woods, swamp, mangroves, etc.

Inside View of theMosquito Magnet™

Date post:	03-Aug-2020
Category:	Documents
Upload:	others
View:	5 times
Download:	2 times

N2004 Tools 1 - Tractor Parts-Combine Parts-Farm Equipment ... · TOOLS 553 T OOLS Professional...

Documents