NAILS & STAPLES BOLTS, SCREWS & NUTS WASHERS, CLIPS & … · bolts, screws & nuts washers, clips &...

FASTENERS

NAILS & STAPLES

BOLTS, SCREWS & NUTS

WASHERS, CLIPS & PINS

METAL KEYSTOCK, TUBES & BARS

CONCRETE ANCHORS & ADHESIVES

RIVETS & ACCESSORIES

STAPLE GUNS & TACKING

ANCHORS & ACCESSORIES

THREAD REPAIR KITS

A BSNC COMPANY

ALASKA INDUSTRIAL ALASKA INDUSTRIAL ALASKA INDUSTRIAL HARDWAREHARDWAREHARDWARE 97

Chap03 - Fasteners 2016 FINAL.indd 97 1/23/17 11:11 AM

98 www.ghdalaska.comGHD ORDER DESK 907.279.6691 • 1-800-478-4393

FASTENERS

Common NailsBright

Popular all-purpose nail, used for general con-struction, carpentry and framing. Flat head, dia-mond point and bright finish. Length is from point to underside of head.

Mfg. No. Order No. Size Pkg. Qty.6C1 NLS13145 6d 1 Lb. box8C1 NLS13166 8d 1 Lb. box8C5 NLS13169 8d 5 Lb. box

8D BRIGHT NLS13175 8d 50 Lb. box10C1 NLS13178 10d 1 Lb. box10C5 NLS13181 10d 5 Lb. box16C1 NLS13202 16d 1 Lb. box16C5 NLS13205 16d 5 Lb. box

16D BRIGHT NLS13211 16d 50 Lb. box20C1 NLS13214 20d 1 Lb. box20C5 NLS13217 20d 5 Lb. box

60D BRIGHT NLS13259 60d 50 Lb. box

Common NailsGalvanized

An all-purpose nail for outdoor use, coated to ease penetration and improve holding power. Recom-mended for cedar or redwood.Mfg. No. Order No. Size Pkg. Qty.

6HGC1 NLS13306 6d 1 Lb. box8HGC1 NLS13321 8d 1 Lb. box8HGC5 NLS13324 8d 5 Lb. box8HGC NLS13330 8d 50 Lb. box

16HGC1 NLS13357 16d 1 Lb. box16HGC5 NLS13360 16d 5 Lb. box16HGC NLS13366 16d 50 Lb. box

Concrete Nails

Fluted shank masonry/concrete nails for use on concrete forms.

Mfg. No. Order No. Lgth. In.Pkg. Qty.

212TFMAS1 NLS17449 2-1/2 1 Lb. box212TFMAS5 NLS17452 2-1/2 5 Lb. box

Box NailsGalvanized

With a thin shank designed to reduce splitting. Good choice for fencing projects and recommend-ed for cedar and redwood.

Mfg. No. Order No. Size Pkg. Qty.6HGBX1 NLS12362 6d 1 Lb. box6HGBX5 NLS12365 6d 5 Lb. box8HGBX1 NLS12386 8d 1 Lb. box8HGBX5 NLS12389 8d 5 Lb. box8HGBX NLS12395 8d 50 Lb. box

10HGBX1 NLS12398 10d 1 Lb. box10HGBX5 NLS12401 10d 5 Lb. box16HGBX1 NLS12422 16d 1 Lb. box16HGBX5 NLS12425 16d 5 Lb. box16HGBX NLS12431 16d 50 Lb. box20HGBX1 NLS12434 20d 1 Lb. box20HGBX5 NLS12437 20d 5 Lb. box20HGBX NLS12443 20d 50 Lb. box

Chap03 - Fasteners 2016 FINAL.indd 98 1/19/17 5:11 PM

99AIH ORDER DESK 907.276.7201 • 1-800-478-7201 A BSNC COMPANY

ALASKA INDUSTRIAL ALASKA INDUSTRIAL ALASKA INDUSTRIAL HARDWAREHARDWAREHARDWARE

www.aih.com

FASTENERSFinish Nails

Thin nail used for finishing work. Brad head cupped for easy concealment. With bright finish.

Mfg. No. Order No. Size Pkg. Qty.

Bright6F1 NLS14359 6d 1 Lb. box6F5 NLS14362 6d 5 Lb. box8F1 NLS14374 8d 1 Lb. box8F5 NLS14377 8d 5 Lb. box

Galvanized6HGF1 NLS14472 6d 1 Lb. box8HGF1 NLS14484 8d 1 Lb. box

Roo�ng NailsGalvanized

NLS16464

NLS16647

Features large head for greater holding, sharp point and thin shank for easy penetration. Recom-mended for cedar or redwood.

Mfg. No. Order No. Lgth. In. Pkg. Qty.114EGRFG1 NLS16464 1-1/4 1 Lb. box114EGRFG5 NLS16467 1-1/4 5 Lb. box112EGRFG1 NLS16476 1-1/2 1 Lb. box112EGRFG5 NLS16479 1-1/2 5 Lb. box112EGRFG NLS16485 1-1/2 50 Lb. box2EGRFG1 NLS16500 2 1 Lb. box2EGRFG5 NLS16503 2 5 Lb. box

With Neoprene Washer134EGNEO5 NLS16647 1-3/4 5 Lb. box

Duplex Nails

With two heads. First head for holding strength, second positioned for easy removal with claw or crowbar. For temporary construction applications such as forms or scaffolding.

Mfg. No. Order No. Size Pkg. Qty.

8DUP1 NLS13865 8d 1 Lb. box8DUP5 NLS13868 8d 5 Lb. box

8D NLS50710 8d 50 Lb. box16DUP1 NLS13901 16d 1 Lb. box16DUP5 NLS13904 16d 5 Lb. box

16D NLS50695 16d 50 Lb. box

Joist Hanger NailsGalvanized

For attaching joist hangers to wood studs. Short, heavy gauge nail provides increased holding pow-er without fully penetrating wood.

Mfg. No. Order No. Lgth. In. Pkg. Qty.112HGJST1 NLS14800 1-1/2 1 Lb. box112HGJST5 NLS14803 1-1/2 5 Lb. box

Sinker NailsVinyl Coated

Used primarily as a framing nail. Countersunk head provides flat, even surface with wood. Coated to ease penetration and increase holding power.

Mfg. No. Order No. Size Pkg. Qty.8CTDSKR1 NLS15628 8d 1 Lb. box8CTDSKR5 NLS15631 8d 5 Lb. box

8D/VC NLS50675 8d 50 Lb. box16CTDSKR1 NLS15664 16d 1 Lb. box16CTDSKR5 NLS15667 16d 5 Lb. box

16D/VC NLS50650 16d 50 Lb. box

Casing NailsGalvanized

Coated with zinc for excellent rust resistance. Cupped brad heads for easy concealment. Recom-mended for use with cedar or redwood.

Mfg. No. Order No. Size Pkg. Qty.16HGCAS

1#NLS12950 16d 1 Lb. box

16HGCAS5 NLS12953 16d 5 Lb. box

Spikes

Spike

Galvanized Spike

For extra holding power on large pieces of wood.Mfg.No.

OrderNo.

Lgth.In.

Dia.In.

Pkg.Qty.

8SPK NLS14832 8 3/8 50 Lb. box

10SPK NLS14838 10 3/8 50 Lb. box

12SPK NLS14844 12 3/8 50 Lb. box

Galvanized

8HGSPK NLS14949 8 3/8 50 Lb. box

10HGSPK NLS14955 10 3/8 50 Lb. box

12HGSPK NLS14961 12 3/8 50 Lb. box

Galvanized Staples

For installation of wire fencing or nailing. Made from bent wire with points on both ends. Recom-mended for cedar or redwood.Mfg. No. Order No. Lgth. In. Pkg. Qty.112HGFS5 NLS14195 1-1/2 5 Lb. box

Storage SystemsDrawers

Heavy duty steel construction. Drawers have 24 compartments, a locking mechanism, handle and can be removed from the cabinet. Includes over 2000 assorted pieces of premium grade hardware, grade 5 SAE and grade 8.8 metric nuts and bolts.

Mfg. No.

OrderNo.

No. Drawers

Dim. In.L x W x H

90-800 OLY90800 4 18.7 x 15.8 x 13.5

Screw AssortmentsStainless Steel

Most common sizes of flat & pan head screws nuts & washers. Includes plastic case.

Mfg. No. Order No. Pc. Qty.01000-0001-800 PFC21622 520



FASTENERSFastener Assortments

Stainless Steel

Includes round head slotted screws, flat washers, machine screws, and nuts.

Mfg. No. Order No.Pc. Qty.

W5358 WIM15989 224

Hex BoltsGrade 2

Grade 2 fasteners are typically made of low-carbon steel and are commonly used for wood and general hardware applications where higher strength is not required. They have no radial markings on the head. Zinc Plating helps to prevent corrosion. Hex bolts have a chamfered point to aid insertion into a tapped hole or nut. Length is measured from under the head.

Size In.

Proof Load PSI

Min. Tensile Strength PSI

1/4 – 3/4

55,000 74,000

Over 3/4

33,000 60,000

Hex BoltsZinc-Plated

NC Grade 2.

Order No. Lgth. In. Pkg. Qty.1/4" Diameter

2ZP1434 3/4 1002ZP141 1 100

2ZP14114 1-1/4 1002ZP14112 1-1/2 1002ZP14134 1-3/4 1002ZP142 2 100

2ZP14212 2-1/2 1002ZP143 3 100

2ZP14312 3-1/2 1002ZP144 4 1002ZP145 5 1002ZP146 6 100

5/16" Diameter2ZP51634 3/4 1002ZP5161 1 100

2ZP516114 1-1/4 1002ZP516112 1-1/2 1002ZP516134 1-3/4 1002ZP5162 2 100

2ZP516212 2-1/2 1002ZP5163 3 100

2ZP516312 3-1/2 502ZP5164 4 50

2ZP516412 4-1/2 502ZP5165 5 502ZP5166 6 50

3/8" Diameter2ZP3834 3/4 1002ZP381 1 100

2ZP38114 1-1/4 1002ZP38112 1-1/2 1002ZP38134 1-3/4 1002ZP382 2 100

2ZP38212 2-1/2 502ZP383 3 50

2ZP38312 3-1/2 502ZP384 4 50

2ZP38412 4-1/2 502ZP385 5 50

2ZP38512 5-1/2 502ZP386 6 502ZP387 7 502ZP388 8 502ZP389 9 50

2ZP3810 10 50Order No. Lgth. In. Pkg. Qty.

1/2" Diameter2ZP121 1 50

2ZP12114 1-1/4 502ZP12112 1-1/2 502ZP12134 1-3/4 502ZP122 2 50

2ZP12212 2-1/2 502ZP123 3 50

2ZP12312 3-1/2 252ZP124 4 25

2ZP12412 4-1/2 252ZP125 5 25

2ZP12512 5-1/2 252ZP126 6 252ZP127 7 252ZP128 8 252ZP129 9 25

2ZP1210 10 252ZP1212 12 25

5/8" Diameter2ZP58112 1-1/2 252ZP582 2 25

2ZP58212 2-1/2 252ZP583 3 25

2ZP58312 3-1/2 252ZP584 4 252ZP585 5 252ZP586 6 252ZP587 7 252ZP588 8 252ZP589 9 20

2ZP5810 10 202ZP5812 12 20

3/4" Diameter2ZP342 2 20

2ZP34212 2-1/2 202ZP343 3 20

2ZP34312 3-1/2 202ZP344 4 202ZP345 5 202ZP346 6 202ZP347 7 202ZP348 8 20

2ZP3410 10 202ZP3412 12 15

Hex BoltsGalvanized

NC Grade 2.


HGB141 1 100HGB14112 1-1/2 100HGB142 2 100

HGB14212 2-1/2 100HGB143 3 100

HGB14312 3-1/2 100HGB144 4 100HGB145 5 100HGB146 6 100

5/16" DiameterHGB5161 1 100

HGB516112 1-1/2 100HGB5162 2 100

HGB516212 2-1/2 100HGB5163 3 100

HGB516312 3-1/2 50HGB5164 4 50




www.aih.com

FASTENERSHGB5165 5 50HGB5166 6 50


HGB38112 1-1/2 100HGB382 2 100

HGB38212 2-1/2 50HGB383 3 50

HGB38312 3-1/2 50HGB384 4 50

HGB38412 4-1/2 50HGB385 5 50HGB386 6 50


HGB12112 1-1/2 50HGB122 2 50

HGB12212 2-1/2 50HGB123 3 50

HGB12312 3-1/2 25HGB124 4 25

HGB12412 4-1/2 25HGB125 5 25HGB126 6 25HGB127 7 25


HGB582 2 25HGB58212 2-1/2 25HGB583 3 25HGB584 4 25HGB585 5 25HGB586 6 25

3/4" DiameterHGB34212 2-1/2 20

HGB343 3 20HGB34312 3-1/2 20HGB344 4 20HGB345 5 20HGB346 6 20HGB348 8 20

Hex BoltsGrade 8

Grade 8 bolts are comprised of carbon alloy steel, heat treated in a carbon controlled atmosphere and are generally the most durable and reliable fastener. Higher grade materials, such as carbon alloy steel, allow for greater torque strength in the threads of the bolt. The preload, or thread tension in a fastener is higher when the type of steel being used is grade 8 in quality.

Size In.

Proof Load PSI

Min. Tensile Strength PSI

1/4 – 1 120,000 150,000

Hex BoltsZinc-Plated — Coarse Thread

NC Grade 8.


8NC1412 1/2 1008NC1434 3/4 1008NC141 1 100

8NC14114 1-1/4 1008NC14112 1-1/2 1008NC14134 1-3/4 1008NC142 2 100

8NC14212 2-1/2 1008NC143 3 100

8NC14312 3-1/2 1008NC144 4 100


8NC51634 3/4 1008NC5161 1 100

8NC516114 1-1/4 1008NC516112 1-1/2 1008NC516134 1-3/4 1008NC5162 2 100

8NC516212 2-1/2 1008NC5163 3 100

8NC516312 3-1/2 508NC5164 4 508NC5165 5 508NC5166 6 50

3/8" Diameter8NC3834 3/4 1008NC381 1 100

8NC38114 1-1/4 100

8NC38112 1-1/2 1008NC38134 1-3/4 1008NC382 2 100

8NC38212 2-1/2 508NC38234 2-3/4 508NC383 3 50

8NC38312 3-1/2 508NC384 4 50

8NC38412 4-1/2 508NC385 5 508NC386 6 50

7/16" Diameter8NC7161 1 100

8NC716114 1-1/4 508NC716112 1-1/2 508NC716134 1-3/4 508NC7162 2 50

8NC716212 2-1/2 508NC7163 3 50

8NC716312 3-1/2 258NC7164 4 258NC7165 5 258NC7166 6 25

1/2" Diameter8NC121 1 50

8NC12114 1-1/4 50

8NC12112 1-1/2 508NC12134 1-3/4 508NC122 2 50

8NC12212 2-1/2 50 8NC123 3 50

8NC12312 3-1/2 258NC124 4 25

8NC12412 4-1/2 258NC125 5 258NC126 6 25

9/16" Diameter8NC916112 1-1/2 25

8NC9162 2 258NC916212 2-1/2 258NC9163 3 25

8NC916312 3-1/2 258NC9164 4 258NC9165 5 258NC9166 6 25

5/8" Diameter continued next page8NC58114 1-1/4 258NC58112 1-1/2 258NC58134 1-3/4 258NC582 2 25

8NC58214 2-1/4 25

Order No. Lgth. In. Pkg. Qty.

5/8" Diameter continued from previous page8NC58212 2-1/2 25

8NC583 3 258NC58312 3-1/2 258NC584 4 25

8NC58412 4-1/2 258NC585 5 258NC586 6 258NC587 7 258NC588 8 25

3/4" Diameter8NC34112 1-1/2 20

8NC342 2 208NC34214 2-1/4 208NC34212 2-1/2 208NC34234 2-3/4 208NC343 3 20

8NC34312 3-1/2 208NC344 4 20

8NC34412 4-1/2 208NC345 5 208NC346 6 208NC347 7 208NC348 8 20

7/8" Diameter8NC782 2 10

8NC78212 2-1/2 108NC783 3 10

8NC78312 3-1/2 108NC784 4 10

8NC78412 4-1/2 108NC785 5 108NC786 6 10

1" Diameter8NC1212 2-1/2 10

8NC13 3 108NC1312 3-1/2 108NC14 4 108NC15 5 108NC16 6 108NC17 7 108NC18 8 10



FASTENERSHex Bolts

Zinc-Plated — Fine Thread

NF Grade 8.


8NF1412 1/2 1008NF1434 3/4 1008NF141 1 100

8NF14114 1-1/4 1008NF14112 1-1/2 1008NF14134 1-3/4 100

8NF142 2 100Order No. Lgth. In. Pkg. Qty.

1/4" Diameter8NF14212 2-1/2 100

8NF143 3 1005/16" Diameter

8NF51634 3/4 1008NF5161 1 100

8NF516114 1-1/4 1008NF516112 1-1/2 1008NF516134 1-3/4 100

8NF5162 2 1008NF516212 2-1/2 100

8NF5163 3 1008NF516312 3-1/2 50

8NF5164 4 503/8" Diameter

8NF3834 3/4 1008NF381 1 100

8NF38114 1-1/4 1008NF38112 1-1/2 1008NF38134 1-3/4 100

8NF382 2 1008NF38212 2-1/2 50

8NF383 3 508NF38312 3-1/2 50

8NF384 4 501/2" Diameter

8NF121 1 508NF12114 1-1/4 508NF12112 1-1/2 508NF12134 1-3/4 50

8NF122 2 508NF12212 2-1/2 50

8NF123 3 508NF12312 3-1/2 25

8NF124 4 258NF12412 4-1/2 25

8NF125 5 258NF126 6 25

5/8" Diameter8NF58112 1-1/2 25

8NF582 2 258NF58212 2-1/2 25

8NF583 3 258NF58312 3-1/2 25

8NF584 4 25

Hex BoltsStainless Steel

NC Grade 18-8.


SSB1434 3/4 100

SSB141 1 100

SSB14112 1-1/2 100

SSB142 2 100

SSB14212 2-1/2 100

SSB143 3 100

SSB14312 3-1/2 100

SSB144 4 100

5/16" Diameter

SSB51634 3/4 100

SSB5161 1 100

SSB516112 1-1/2 100

SSB5162 2 100

SSB516212 2-1/2 100

SSB5163 3 100

SSB516312 3-1/2 50

SSB5164 4 50

3/8" Diameter

SSB3834 3/4 100

SSB381 1 100

SSB38112 1-1/2 100

SSB382 2 100

SSB38212 2-1/2 50

SSB383 3 50

SSB38312 3-1/2 50

SSB384 4 50

1/2" Diameter

SSB12112 1-1/2 50

SSB122 2 50

SSB12212 2-1/2 50

SSB123 3 50

SSB12312 3-1/2 25

SSB124 4 25

SSB12412 4-1/2 25

SSB125 5 25

SSB126 6 25

Carriage BoltsZinc-Plated


CAB31634 3/4 100

CAB3161 1 100

CAB316112 1-1/2 100

CAB3162 2 100

1/4" DiameterCAB141 1 100

CAB14112 1-1/2 100

CAB142 2 100

CAB14212 2-1/2 100

CAB143 3 100

CAB14312 3-1/2 100

CAB144 4 100

CAB14412 4-1/2 100

CAB145 5 100

CAB146 6 100


CAB516112 1-1/2 100

CAB5162 2 100

CAB516212 2-1/2 100

CAB5163 3 100

CAB516312 3-1/2 50

CAB5164 4 50

CAB516412 4-1/2 50

CAB5165 5 50

CAB5166 6 50


CAB38112 1-1/2 100

CAB382 2 100

CAB38212 2-1/2 50

CAB383 3 50

CAB38312 3-1/2 50

CAB384 4 50

CAB38412 4-1/2 50

CAB385 5 50

CAB38512 5-1/2 50

CAB386 6 50

CAB387 7 50

CAB388 8 50

CAB389 9 50

CAB3810 10 50




www.aih.com

FASTENERSCarriage Bolts

Zinc-Plated

OrderNo.

Lgth.In.

Pkg.Qty.

1/2" Diameter

CAB12112 1-1/2 50

CAB122 2 50

CAB12212 2-1/2 50

CAB123 3 50

CAB12312 3-1/2 25

CAB124 4 25

CAB12412 4-1/2 25

CAB125 5 25

CAB126 6 25

CAB127 7 25

CAB128 8 25

CAB129 9 25

CAB1210 10 25

CAB1212 12 25

5/8" Diameter

CAB582 2 25

CAB58212 2-1/2 25

CAB583 3 25

CAB58312 3-1/2 25

CAB584 4 25

CAB585 5 25

CAB586 6 25

CAB587 7 25

CAB588 8 25

CAB5810 10 20

CAB5812 12 20

Carriage BoltsGalvanized

Order No. Lgth. In. Pkg. Qty.

1/4" DiameterHGC14112 1-1/2 100HGC142 2 100

HGC14212 2-1/2 100HGC143 3 100

HGC14312 3-1/2 100HGC144 4 100

5/16" DiameterHGC516112 1-1/2 100HGC5162 2 100

HGC516212 2-1/2 100HGC5163 3 100

HGC516312 3-1/2 50HGC5164 4 50

HGC516412 4-1/2 50HGC5165 5 50

HGC516512 5-1/2 50HGC5166 6 50

3/8" DiameterHGC38112 1-1/2 100HGC382 2 100

HGC38212 2-1/2 50HGC383 3 50

HGC38312 3-1/2 50HGC384 4 50HGC385 5 50HGC386 6 50

1/2" Diameter continued on next pageHGC12112 1-1/2 50HGC122 2 50

HGC12212 2-1/2 50HGC123 3 50

HGC12312 3-1/2 25HGC124 4 25

HGC12412 4-1/2 25HGC125 5 25HGC126 6 25

Lag ScrewsZinc-Plated

OrderNo.

Lgth.In.

Pkg.Qty.

1/4" DiameterLAG141 1 100

LAG14112 1-1/2 100LAG142 2 100

LAG14212 2-1/2 100LAG143 3 100

LAG14312 3-1/2 100LAG144 4 100

LAG14412 4-1/2 100LAG145 5 100LAG146 6 100


LAG516112 1-1/2 100LAG5162 2 100

LAG516212 2-1/2 100LAG5163 3 100

LAG516312 3-1/2 50LAG5164 4 50

LAG516412 4-1/2 50LAG5165 5 50LAG5166 6 50


LAG38112 1-1/2 100LAG382 2 100

LAG38212 2-1/2 50LAG383 3 50

LAG38312 3-1/2 50LAG384 4 50

LAG38412 4-1/2 50LAG385 5 50LAG386 6 50LAG387 7 50LAG388 8 50


LAG12212 2-1/2 50LAG123 3 50

LAG12312 3-1/2 25LAG124 4 25

LAG12412 4-1/2 25LAG125 5 25LAG126 6 25LAG127 7 25LAG128 8 25LAG1210 10 25OrderNo.

Lgth.In.

Pkg.Qty.

5/8" DiameterLAG583 3 25LAG584 4 25LAG585 5 25LAG586 6 25LAG588 8 25LAG5810 10 20LAG5812 12 20

3/4" DiameterLAG343 3 20LAG344 4 20LAG345 5 20LAG346 6 20LAG348 8 20



FASTENERSLag ScrewsGalvanized

OrderNo.

Lgth.In.

Pkg.Qty.

1/4" DiameterHGL14112 1-1/2 100HGL142 2 100

HGL14212 2-1/2 100HGL143 3 100HGL144 4 100HGL145 5 100HGL146 6 100

5/16" DiameterHGL516112 1-1/2 100HGL5162 2 100

HGL516212 2-1/2 100HGL5163 3 100

HGL516312 3-1/2 50HGL5164 4 50

HGL516412 4-1/2 50HGL5165 5 50HGL5166 6 50

3/8" DiameterHGL38112 1-1/2 100HGL382 2 100

HGL38212 2-1/2 50HGL383 3 50

HGL38312 3-1/2 50HGL384 4 50

HGL38412 4-1/2 50HGL385 5 50HGL386 6 50OrderNo.

Lgth.In.

Pkg.Qty.

1/2" DiameterHGL12112 1-1/2 50HGL122 2 50

HGL12212 2-1/2 50HGL123 3 50

HGL12312 3-1/2 25HGL124 4 25HGL125 5 25HGL126 6 25HGL127 7 25HGL128 8 25

5/8" DiameterHGL583 3 25HGL584 4 25HGL585 5 25HGL586 6 25

Lag ScrewsStainless Steel

OrderNo.

Lgth.In.

Pkg.Qty.

1/4" Diameter

SSLG141 1 100SSLG14114 1-1/4 100SSLG14112 1-1/2 100

SSLG142 2 100SSLG14212 2-1/2 100

SSLG143 3 100SSLG14312 3-1/2 100

SSLG144 4 100

5/16" DiameterSSLG5161 1 100

SSLG516112 1-1/2 100SSLG5162 2 100

SSLG516212 2-1/2 100SSLG5163 3 100

SSLG516312 3-12 50SSLG5164 4 50SSLG5165 5 50

3/8" DiameterSSLG38112 1-1/2 100

SSLG382 2 100SSLG38212 2-1/2 50

SSLG383 3 50SSLG384 4 50SSLG385 5 50SSLG386 6 50

All ThreadThreaded Rods

Zinc-plated steel.OrderNo.

Thread Size

Lgth.In.

10-24 Thread SizeALL102436 36

1/4" Thread SizeALL1412 12ALL1436 36ALL1472 72ALL14120 120

5/16" Thread SizeALL51612 12ALL51636 36ALL51672 72

3/8"Thread SizeALL3812 12ALL3836 36ALL3872 72ALL38120 120

7/16" Thread SizeALL71636 36

1/2" Thread SizeALL1212 12ALL1236 36ALL1272 72ALL12120 120




1" Thread SizeALL136 36ALL172 72ALL1120 120

Rod Couplings

OrderNo.

ThreadSize

Pkg.Qty.

RDC14 1/4"-20 50RDC516 5/16"-18 30RDC38 3/8"-16 30RDC12 1/2"-13 30RDC58 5/8"-11 20RDC34 3/4"-10 20RDC78 7/8" - 9 10RDC1 1 10

RDC118 1-1/8" - 7 10

Hanger Bolts

OrderNo.

Lgth.In.

Pkg.Qty.

1/4" DiameterPFC13229 2-1/2 100

3/8" DiameterPFC22290 3 100PFC09792 4 50




www.aih.com

FASTENERSAnchor Bolts

Hot-dipped galvanized. Includes nut.

Mfg. No. Order No. Dia. In. Lgth. In.FB5810 KIRAB5810 5/8 10

Acoustical Eye Lags

For use with tie wire, ceiling wire, and jack chain applications.

Order No. Dia. In. Lgth. In. Pkg. Qty.PFCEYELAG 1/4 3 25

Machine Screws

Phillips slot.

OrderNo.

Lgth.In.

ThreadSize

Pkg.Qty.

Flat Head — Stainless SteelPFC12193 3/4 1/4"-20 50PFC12195 1 1/4"-20 50PFC12197 1-1/2 1/4"-20 50PFC12198 2 1/4"-20 25

Pan Head — Stainless SteelPFC12213 1/2 8-32 100PFC12214 3/4 8-32 100PFC12219 1 8-32 100PFC12223 3/4 10-24 100PFC12225 1 10-24 100PFC12227 1-1/2 10-24 50PFC12228 2 10-24 50PFC12229 1/2 1/4"-20 100PFC12231 1 1/4"-20 50PFC12233 1-1/2 1/4"-20 50PFC12235 2 1/4"-20 25

Flat Head — ZincPFC13183 1/2 6-32 100PFC13186 3/4 6-32 100PFC13188 1 6-32 100PFC13190 1-1/2 6-32 100PFC13218 2 6-32 100PFC13219 1/2 8-32 100PFC13222 3/4 8-32 100PFC13223 1 8-32 100PFC13224 1-1/2 8-32 100PFC13225 2 8-32 50PFC13226 2-1/2 8-32 100PFC13227 3 8-32 100PFC13232 1/2 10-24 100PFC13240 3/4 10-24 100

PFC13241 1 10-24 100PFC13242 1-1/4 10-24 100PFC13243 1-1/2 10-24 50PFC13258 2 10-24 50PFC13262 3 10-24 50PFC13264 1/2 1/4"-20 100PFC13267 3/4 1/4"-20 50PFC13268 1 1/4"-20 50PFC13269 1-1/2 1/4"-20 50PFC13272 2-1/2 1/4"-20 25PFC13273 2 1/4"-20 25PFC13274 3 1/4"-20 25PFC13276 4 1/4"-20 25

Machine ScrewsRound Head — Phillips

Round head with Phillips slot. Zinc.OrderNo.

Lgth.In. Thread Size

Pkg. Qty.

PFC13098 1/2 8-32 100

PFC13102 3/4 8-32 100

PFC47233 1 8-32 100

PFC13111 1-1/2 8-32 50

PFC13113 2 8-32 50

PFC13119 2-1/2 8-32 50

PFC13122 3 8-32 50

PFC13124 1/2 10-24 100

PFC13125 3/4 10-24 100

PFC13126 1 10-24 100

PFC13127 1-1/4 10-24 100

PFC13128 1-1/2 10-24 50

PFC13129 2 10-24 50

PFC13130 3 10-24 50

PFC13132 1/2 10-32 100

PFC13135 3/4 10-32 100

PFC13138 1 10-32 100

PFC13140 1-1/2 10-32 50

PFC13142 2 10-32 50

PFC13146 1/4 1/4-20 100

PFC13154 3/4 1/4-20 50

PFC13159 1 1/4-20 50

PFC13165 1-1/4 1/4-20 50

PFC13169 1-1/2 1/4-20 50

PFC13175 2 1/4-20 25

PFC13176 2-1/2 1/4-20 25

PFC13177 3 1/4-20 25

PFC13178 4 1/4-20 25

Hex Nuts

Order No. Thread SizePkg. Qty.

Zinc PlatedNZP1420 1/4"-20 100

NZP51618 5/16"-18 100

NZP3816 3/8"-16 100

NZP71614 7/16"-14 50

NZP1213 1/2"-13 50

NZP5811 5/8"-11 25

NZP3410 3/4"-10 20

NZP789 7/8"-9 15

NZP18 1"-8 10

NZP1187 1-1/8"-7 10

NZP1147 1-1/4"-7 10

Stainless Steel

SSN1420 1/4"-20 100

SSN51618 5/16"-18 50

SSN3816 3/8"-16 50

SSN1213 1/2"-13 50

SSN5811 5/8"-11 25

Hex Nuts

Galvanized.

Order No. Thread Size Pkg. Qty.HGN1420 1/4"-20 NC 100

HGN51618 5/16"-18 NC 100

HGN3816 3/8"-16 NC 100

HGN1213 1/2"-13 NC 50

HGN5811 5/8"-11 NC 25

HGN3410 3/4"-10 NC 20

HGN789 7/8"-9 NC 15



FASTENERSMachine Screw Nuts

Order No. Thread Size Pkg. Qty.PFC72665 6-32 100PFC72666 8-32 100PFC72667 10-24 100PFC72672 10-32 100PFC13047 12-24 100PFC72669 1/4"-20 100

Stainless SteelPFC14906 6-32 100PFC14908 8-32 100PFC12107 10-24 100PFC12104 1/4-20 100

Hex Nuts

Grade 8.Order No. Thread Size Pkg. Qty.

8NT1420 1/4"-20 NC 1008NT1428 1/4"-28 NF 1008NT51618 5/16"-18 NC 1008NT51624 5/16"-24 NF 1008NT3816 3/8"-16 NC 1008NT3824 3/8"-24 NF 1008NT71614 7/16"-14 NC 508NT1213 1/2"-13 NC 508NT1220 1/2"-20 NF 508NT91612 9/16"-12 NC 258NT5811 5/8"-11 NC 258NT5818 5/8"-18 NF 258NT3410 3/4"-10 NC 208NT789 7/8"-9 NC 158NT18 1"-8 NC 10

LocknutsNylon

Order No. Thread Size Pkg. Qty.NLN1024 10/24 NC 100NLN1032 10/32 NF 100NLN1420 1/4"-20 NC 100NLN1428 1/4"-28 NF 100NLN51618 5/16"-18 NC 100NLN51624 5/16"-24 NF 100NLN3816 3/8"-16 NC 100NLN3824 3/8"-24 NF 100NLN71614 7/16"-14 NC 100NLN1213 1/2"-13 NC 100NLN1220 1/2"-20 NF 100NLN91612 9/16"-12 NC 50NLN5811 5/8"-11 NC 50NLN5818 5/8"-18 NF 50NLN3410 3/4"-10 NC 50NLN789 7/8"-9 NC 25NLN18 1"-8 NC 25

Stainless SteelPFC14910 6-32 SS 100PFC12120 8-32 SS 100PFC12122 10-24 SS 100PFC12127 1/4-20 SS 100SSLN1420 1/4"-20 100SSLN51618 5/16"-18 100SSLN3816 3/8"-16 50SSLN1213 1/2"-13 25

Grade 88LN1420 1/4"-20 GR8 1008LN51618 5/16"-18 GR8 1008LN3816 3/8"-16 GR8 1008LN71614 7/16"-14 GR8 1008LN1213 1/2"-13 GR8 1008LN91612 9/16"-12 GR8 508LN3410 3/4"-10 GR8 508LN5811 5/8"-11 GR8 50

Wingnuts

Zinc-plated.

Order No. Thread Size Pkg. Qty.PFC72823 10-24 100PFC72824 1/4"-20 50PFC72825 5/16"-18 50PFC72826 3/8"-16 25PFC72827 1/2"-13 10

WashersSAE

Zinc-plated.Order No. Trade Size Pkg. Qty.

PFC72971 #6 100PFC72972 #8 100PFC72973 #10 100PFC30300 #12 100PFC30301 1/4 100PFC30302 5/16 100PFC30303 3/8 100PFC30304 7/16 105PFC30305 1/2 55PFC92980 9/16 43PFC92981 5/8 36PFC92982 3/4 21

Cut WashersZinc-Plated

Order No. Trade Size Pkg. Qty.PFC30282 1/4 100PFC30288 5/16 100PFC30289 3/8 100PFC72418 7/16 50PFC72419 1/2 50PFC30292 9/16 50PFC30293 5/8 50PFC30294 3/4 25PFC30295 7/8 25PFC30296 1 25PFC21081 1-1/8 25PFC42963 1-1/4 19PFC42986 1-1/2 13

Cut WashersGalvanized

Order No. Trade Size Pkg. Qty.5GW14 1/4 7465GW516 5/16 4505GW38 3/8 3355GW12 1/2 1295GW58 5/8 645GW34 3/4 455GW78 7/8 32




www.aih.com

FASTENERSFlat Washers

A325

Hardened steel and zinc-plated construction.

Order No. Size In. Pkg. Qty.Hardened Steel

PFC21387 1/4 100PFC21389 5/16 100PFC21390 3/8 100PFC21391 7/16 50PFC21407 1/2 50PFC21427 9/16 25PFC21440 5/8 25PFC21451 3/4 20PFC21514 7/8 10PFC21548 1 10

Zinc PlatedPFC39216 1/4 54PFC39188 5/16 36PFC39187 3/8 24PFC39092 7/16 22PFC39091 1/2 18PFC39090 5/8 12PFC39723 3/4 8

Flat WashersStainless Steel

Order No. Size Pkg. Qty.PFC12139 #6 100PFC12141 #8 100PFC12143 #10 100PFC12145 1/4" 100

Lock Washers

Order No. Trade Size Pkg. Qty.Zinc-Plated

PFC42903 8 100PFC42904 10 100PFC42905 1/4 100PFC42906 5/16 100PFC42907 3/8 100PFC42908 7/16 100PFC42909 1/2 100PFC42910 9/16 100PFC42911 5/8 100PFC42912 3/4 100

Stainless SteelPFC14921 6 100PFC12128 8 100PFC12130 10 100PFC12132 1/4 100

SSL14 1/4 100SSL516 5/16 100SSL12 1/2 100

Hardened AlloyPFC60331 1/4 100PFC60333 5/16 100PFC60335 3/8 100PFC60337 7/16 100PFC60339 1/2 100PFC56332 9/16 100PFC60341 5/8 100PFC60343 3/4 100PFC60345 7/8 100PFC60347 1 100

GalvanizedPFC71851 1/4 100PFC71852 5/16 100PFC71853 3/8 100PFC71854 1/2 100PFC71855 5/8 100PFC71856 3/4 100

Cut WashersStainless Steel

Order No. Size In.Pkg. Qty.

SSW14 1/4 100SSW38 3/8 100

SSW516 5/16 100SSW12 1/2 100

Fender Washers

Large area. Zinc-plated.

Order No. ID In. OD In. Pkg. Qty.PFC42992 3/16 1-1/4 100PFC42993 1/4 1 100PFC42995 1/4 1-1/2 100PFC42996 5/16 1-1/4 100PFC42990 3/8 1-1/2 100PFC42999 1/2 2 100

Fender WashersStainless Steel

Grade 18-8 stainless steel construction. Size name corresponds to matching screw or bolt sizes.

Order No. ID In. OD In. Pkg. Qty.PFC12146 #8 (5/32) 3/4 100PFC12370 3/16 1 100PFC12152 1/4 1-1/4 50

Finish Washers

Nickel-plated.

Order No. Trade Size Pkg. Qty.PFC73001 6 100PFC73002 8 100PFC73003 10 100PFC73004 12 50

Foundation WashersSquare

Galvanized construction.

Order No. Dim. In. Pkg. Qty.KIR58GSW 5/8 x 3 x 3 50



FASTENERSTapping Screws

Stainless Steel — Phillips Drive

Flat Head

Pan HeadOrderNo.

TradeSize

Lgth.In.

Pkg.Qty.

Flat HeadPFC12239 #6 1/2 100PFC12249 #6 3/4 100PFC12251 #6 1 100PFC12257 #8 1/2 100PFC12259 #8 3/4 100PFC12261 #8 1 100PFC12265 #8 1-1/2 50PFC12267 #8 2 50PFC12270 #10 1/2 100PFC12274 #10 3/4 100PFC12275 #10 1 100PFC12279 #10 1-1/2 50PFC12280 #10 2 50PFC12283 #12 3/4 100PFC12287 #12 1 100PFC12288 #12 1-1/2 50PFC12293 #12 2 25

Pan HeadPFC15039 #6 3/4 100PFC12295 #6 1 100PFC12300 #8 1/2 100PFC12302 #8 3/4 100PFC12304 #8 1 100PFC12306 #8 1-1/2 100PFC12310 #8 2 50PFC12312 #10 1/2 100PFC12314 #10 3/4 100PFC12316 #10 1 100PFC12317 #10 1-1/2 50PFC12318 #10 2 50PFC12320 #12 1/2 100PFC12322 #12 3/4 100PFC12323 #12 1 50PFC12324 #12 1-1/2 50PFC12328 #12 2 25

Sheet Metal ScrewsPan Head — Phillips

Self-DrillingOrderNo.

ThreadSize

Lgth.In.

Pkg.Qty.

PFC62275 6-20 3/8 100PFC62276 6-20 1/2 100PFC62243 8-18 3/4 100PFC62241 8-18 1/2 100PFC62244 8-18 1 100PFC62245 8-18 1-1/2 50PFC62246 10-16 1/2 100PFC62248 10-16 3/4 100PFC62249 10-16 1 100

Sheet Metal Screws Pan Head — Combo Drive

Tapping

Order No. Trade Size Lgth. In. Pkg. Qty.PFC98803 6 1/2 150PFC98806 6 5/8 150PFC98807 6 3/4 130PFC98790 6 1 100PFC98791 6 1-1/4 80PFC98792 6 1-1/2 60PFC00080 8 3/8 130PFC00109 8 1/2 130PFC00140 8 5/8 100PFC00232 8 3/4 100PFC98821 8 1 80PFC00029 8 1-1/4 80PFC00040 8 1-1/2 60PFC00059 8 2 50PFC98455 10 1/2 100PFC29798 10 3/4 80PFC98357 10 1 80PFC98367 10 1-1/4 100PFC98439 10 1-1/2 75PFC98441 10 2 50PFC13180 12 3/4 60PFC98460 12 1 50PFC29800 12 1-1/2 35PFC98468 12 2 30PFC13022 14 1/2 100PFC98505 14 3/4 40PFC98507 14 1 35PFC98509 14 1-1/2 30PFC98516 14 2 20

Self-Drilling ScrewsHex Washer Head

Zinc-plated.

Order No. Trade SizeLgth. In. Pkg. Qty.

No. 2 Point PFC62252 8 1/2 100PFC62254 8 3/4 100PFC62255 8 1 100PFC62256 8 1-1/4 100PFC62257 8 1-1/2 50PFC62258 10 1/2 100

No. 3 PointPFC62260 10 3/4 100PFC62261 10 1 100PFC62262 10 1-1/4 100PFC62263 10 1-1/2 50PFC62264 12-14 3/4 100PFC62265 12-14 1 50PFC62266 12-14 1-1/4 50PFC62267 12-14 1-1/2 50PFC07374 14-14 2 25PFC46403 14-14 3 25

Sheet Metal ScrewsHex Head — Tapping

OrderNo.

TradeSize

Lgth.In.

Pkg.Qty.

PFC75057 6 3/8 100PFC75058 6 1/2 100PFC75060 6 3/4 100PFC75073 8 1/2 100PFC75075 8 3/4 100PFC75076 8 1 100PFC75078 8 1-1/2 50PFC75080 8 2 50PFC75092 10 1/2 100PFC75094 10 3/4 100PFC75095 10 1 50PFC75096 10 1-1/4 50PFC75097 10 1-1/2 50PFC75099 10-24 2 50PFC75123 14 3/4 50PFC75124 14 1 50PFC75126 14 1-1/2 50PFC75128 14 2 25




www.aih.com

FASTENERSSheet Metal Screws

Slotted Hex Head — TappingStainless Steel

Stainless steel construction.Order No. Trade Size Lgth. In.

Pkg. Qty.

PFC12338 8 1/2 100

PFC12341 8 3/4 100

PFC12343 8 1 100

PFC12349 10 1/2 100

PFC12355 10 3/4 100

PFC12356 10 1 100

PFC12357 10 1-1/2 50

PFC12359 12 3/4 100

PFC12362 12 1 50

PFC12366 12 1-1/2 50

Self-Drilling ScrewsTeks® — Heavy-Duty

Includes washer.

Order No. Size Pkg. Qty.

PFC13077 #14 x 2" 25

PFC23791 #12-14 x 1-1/2" 25

PFC23961 #14-14 x 3/4" 25

PFC23859 #14-14 x 1" 25

PFC23913 #14-14 x 1-1/2" 25

PFC23825 #12-14 x 3/4" 50

PFC23776 #12-14 x 1" 50

PFC23817 #12 x 3/4" 50

PFC23772 #12 x 1" 250

PFC23784 #12 x 1-1/2" 250

PFC23837 #14 x 1" 250

PFC23898 #14 x 1-1/2" 250

PFC16020 #14 x 2" 250

Self-Drilling ScrewsK-Lath — Phillips

Order No. Size Pkg. Qty.

PFC19243 8-18 x 1/2" 100

PFC19258 8-18 x 3/4" 100

PFC19265 8-18 x 1" 100

PFC19273 8-18 x 1-1/4" 100

PFC12745 #8 x 9/16" 1 Lb.

PFC12747 #8 x 3/4" 1 Lb.

PFC12751 #8 x 1-1/4" 1 Lb.

PFC12744 #8 x 9/16" 5 Lb.

PFC12746 #8 x 3/4" 5 Lb.

PFC12748 #8 x 1" 5 Lb.

PFC12749 #8 x 1" 1 Lb.

PFC12750 #8 x 1-1/2" 5 Lb.

Pocket Hole Screws1-1/2" Washer Head

Type 17 auger tip that self-taps its own hole, elimi-nating the need to predrill in even the hardest ma-terials.

Mfg. No. Order No. Size / Thread

Pkg. Qty

SML-C150-500 KRG41332 #8 coarse 500

Phillips Bugle Head CoarseDrywall Screws

General purpose screws for use on sheet rock and other materials.

Mfg.No.

OrderNo. Ga.

Lgth. In.

Pkg.Qty.

BlackCS114 8M/

BOXNAR10313 6 1-1/4 8000

114CDWS1 NAR10301 6 1-1/4 1 Lb. box114CDWS5 NAR10304 6 1-1/4 5 Lb. boxCS158 5M NAR10334 6 1-5/8 5000

158CDWS 1# NAR10319 6 1-5/8 1 Lb. box158CDWS 5# NAR10322 6 1-5/8 5 Lb. box

CS6200 NAR10352 6 2 35002CDWS 1# NAR10337 6 2 1 Lb. box2CDWS 5# NAR10340 6 2 5 Lb. box

212CDWS 1# NAR10370 8 2-1/2 1 Lb. box212CDWS 5# NAR10373 8 2-1/2 5 Lb. box

CS300 NAR51108 8 3 20003CDWS 1# NAR10391 8 3 1 Lb. box3CDWS 5# NAR10394 8 3 5 Lb. box

Yellow114GS1 NAR10880 6 1-1/4 1 Lb. box114GS5 NAR10883 6 1-1/4 5 Lb. box158GS1 NAR10901 6 1-5/8 1 Lb. box158GS5 NAR10904 6 1-5/8 5 Lb. box2GS1 NAR10913 6 2 1 Lb.

box2GS5 NAR10916 6 2 5 Lb. box

212GS1 NAR10931 8 2-1/2 1 Lb. box212GS5 NAR10934 8 2-1/2 5 Lb. box3GS1 NAR10946 8 3 1 Lb. box3GS5 NAR10949 8 3 5 Lb. box

Bugle Head Drywall ScrewsSelf-Drilling

Used for fastening drywall to 14-20 gauge metal studs. Posi-Grip drill point provides easier cutting and faster penetration. Black phosphate.

Mfg. No. Order No. Ga.

Lgth. In.

Pkg. Qty.

SD114 NAR51329 6 1-1/4 8000SD1141 NAR51589 6 1-1/4 1 Lb. boxSD1145 NAR51605 6 1-1/4 5 Lb. box



FASTENERSPhillips Head Multi-Purpose Wood

Screws

For outdoor applications. Yellow zinc.

Mfg. No. Order No. Ga.Lgth. In. Pkg. Qty.

GS114 NAR10889 6 1-1/4 8000GS158

5MNAR51137 6 1-5/8 5000

GS200 NAR51138 6 2 3500GS212 NAR51139 8 2-1/2 2500GS300 NAR51141 8 3 2000

Primeguard Exterior Screws

NAR 10255

NAR 53142Corrosion resistant screws for outdoor applica-tions.

Mfg. No. Order No. Ga. Lgth. In.

Pkg. Qty.

Combo Drive

P158S1 NAR10255 8 1-5/8 1 Lb. box

P158S5 NAR10256 8 1-5/8 5 Lb. box

P212S1 NAR10261 9 2-1/2 1 Lb. box

P212S5 NAR10262 9 2-1/2 5 Lb. box

P3S1 NAR10264 9 3 1 Lb. box

P3S5 NAR10265 9 3 5 Lb. box

P4S1 NAR10270 10 4 1 Lb. box

P4S5 NAR10272 10 4 5 Lb. box

Star Drive

PSTB1 NAR53142 9 3 1 Lb. box

P3STBK NAR53143 9 3 5 Lb. box

Wood ScrewsHeavy-Duty — TimberLok®

Heat treated steel construction with corrosion-re-sistant coating. Features sharp point, tapered head and aggressive thread.

Mfg.No.

Order No.

Lgth.In.

Pkg.Qty.

FMTLOK04-12 FAS41484 4 12

FMTLOK06-12 FAS41485 6 12

FMTLOK08-12 FAS41486 8 12

FMTLOK10-12 FAS41487 10 12

FMTLOK04-50 FAS40018 4 50

FMTLOK06-50 FAS40004 6 50

FMTLOK08-50 FAS40009 8 50

FMTLOK10-50 FAS40014 10 50

FMTLOK04-250 FAS40020 4 250

FMTLOK06-250 FAS40003 6 250

FMTLOK08-250 FAS40008 8 250

FMTLOK10-250 FAS40013 10 250

Flathead ScrewsHeadLok®

Spider Drive™ system design for high level bit engagement and drivability, and includes spider drive bit.

Mfg. No. Order No.Lgth. In.

Pkg. Qty.

FMHLGM278-12 FAS41488 2-7/8 12

FMHLGM412-12 FAS41489 4-1/2 12

FMHLGM006-12 FAS41490 6 12

FMHLGM278-50 FAS41060 2-7/8 50

FMHLGM412-50 FAS41058 4-1/2 50

FMHLGM006-50 FAS41059 6 50

FMHLGM278-500 FAS41034 2-7/8 500

FMHLGM412-250 FAS41035 4-1/2 500

FMHLGM006-250 FAS41036 6 250

Pole Barn ScrewsWoodbinder

Order No. Size Pkg. Qty.PFC13051 #10 x 2" 50PFC13053 #10 x 3" 50PFC13052 #10 x 2-1/2" 50PFC13049 #10 x 1" 100PFC13050 #10 x 1-1/2" 100PFC24255 #10 x 2-1/2" 250PFC24125 #10 x 1-1/2" 500

Wood ScrewsFlat Head — Phillips

OrderNo.

TradeSize

Lgth.In.

Pkg.Qty.

PFC74201 4 1/2 100

PFC74203 4 3/4 100

PFC13024 4 1 100

PFC74212 6 1/2 100

PFC74214 6 3/4 100

PFC74216 6 1 100

PFC74217 6 1-1/4 100

PFC74218 6 1-1/2 100

PFC74220 6 2 100

PFC74231 8 1/2 100

PFC74233 8 3/4 100

PFC74235 8 1 100

PFC74236 8 1-1/4 100

PFC74237 8 1-1/2 100

PFC74239 8 2 50

PFC74241 8 2-1/2 50

PFC74242 8 3 50

PFC74262 10 3/4 100

PFC74263 10 1 100

PFC74264 10 1-1/4 100

PFC74265 10 1-1/2 50

PFC74267 10 2 50

PFC74268 10 2-1/2 50

PFC74269 10 3 25

PFC74282 12 1 100

PFC74283 12 1-1/4 50

PFC74284 12 1-1/2 50

PFC74286 12 2 50

PFC74287 12 2-1/2 50

PFC74288 12 3 25

PFC74292 1/4 1 50

PFC74293 1/4 1-1/4 50

PFC74294 1/4 1-1/2 50

PFC74296 1/4 2 25

PFC74297 1/4 2-1/2 25

PFC74298 1/4 3 20




www.aih.com

FASTENERSBrass Wood Screws

Flat Head — Phillips Drive

Brass construction.OrderNo.

TradeSize

Lgth.In.

Pkg.Qty.

PFC75944 6 3/4 100

PFC75945 6 1 50

PFC75946 6 1-1/4 50

PFC75947 6 1-1/2 50

PFC75961 8 1/2 50

PFC75963 8 3/4 50

PFC75964 8 1 50

PFC75965 8 1-1/4 50

PFC75966 8 1-1/2 25

PFC75967 8 2 25

PFC75982 10 1 25

PFC75983 10 1-1/4 25

PFC75984 10 1-1/2 25

PFC75985 10 2 25

PFC75993 12 1-1/2 25

PFC75994 12 2 15

Exterior ScrewsCombo Head

Galvanized base with ceramic finish coat. Combi-nation drive coarse thread screws with high cor-rosion-resistant, long life coating. Compliant for treated lumber. Type 17 drill tip drives into wood without pre-drilling.

Mfg. No. Order No. Screw Dim.P212S25M NAR52138 #9 x 2-1/2

P3S2M NAR52196 #9 x 3P4S1M NAR52129 #10 x 4

Exterior ScrewsStar Drive

Lifetime guarantee against rust and corrosion, Type 17 point reduces need to predrill. For pa-tio and deck construction. Countersinking bugle head prevents heads from popping out and leaves smooth finish.

Mfg. No. Order No. Screw Dim.P3STBBK NAR52932 #9 x 3”

StrutsGalvanized

Steel construction featuring electrogalvanized finish.

Mfg. No. Order No. Dim. In. H x W x LRP1000T10PG UNI04489 1-5/8 x 1-5/8 x 120RP4100T10PG UNI04490 1-5/8 x 13/16 x 120

Clevis SpliceGalvanized

9/16" hole diameter. Carbon steel construction. Features 4-holes.

Mfg. No. Order No. Dim. In. L x WRP1377EG UNI04537 1-5/8 x 7-1/4

Beam ClampsGalvanized

Durable, cast iron construc-tion. Provides rod or insulator support. Meets the physical requirements of ASTM A1011 SS GR 33.

Mfg.No.

OrderNo.

FlangeWidth In.

LoadRating Lbs

RP2894-50EG

UNI04471 1/2 x 7/8 400

RP2894-37EG

UNI04470 3/8 x 7/8 350

RP2894-25EG

UNI04469 1/4 x 7/8 150

Conduit Clamps

Steel construction featuring electrogalvanized finish. Fits rigid, IMC, pipe, and EMT.

Mfg. No. Order No. Size In. O.D. In.RP1211EG UNI04496 1/2 .706 - .840RP1212EG UNI04497 3/4 .922 - 1.25RP1213EG UNI04498 1 1.163 - 1.315RP1214EG UNI04499 1-1/4 1.74 - 1.9RP1215EG UNI04500 1-1/2 1.74 - 1.9RP1217EG UNI04501 2 2.197 - 2.375

Spring Nuts

Steel, electrogalvanized construction. Features 20 threads. Includes 5 per package.

Mfg. No. Order No. Hole Dia. In.RP1006T1420EG UNI04479 1/4

RP1008EG UNI04480 3/8RP1010EG UNI04481 1/2

Angle BracketsUniversal — Galvanized

1/2" hole diameter. Carbon steel construction. 90-degree angled plate bracket.

Mfg. No. Order No. Dim. In. L x WRP2484EG UNI04535 4 x 1-5/8

Angle BracketsGalvanized

9/16" hole diameter. Hot rolled carbon steel construction. 90-degree angle bracket featur-ing 4-holes.

Mfg. No. Order No.Dim. In. L

x WRP1325EG UNI04472 4-1/2 x 1-1/8

Angle BracketsGalvanized

Carbon steel construction. 2-hole, 90-degree an-gled plate bracket.




FASTENERSFlat Brackets

Galvanized

1/2" hole diameter. Hot rolled carbon steel con-struction.

Mfg. No. Order No. Dim. In. L x WHole Qty.

RP1065EG UNI04473 3-1/2 x 1-5/8 2RP1067EG UNI04475 7-1/4 x 1-5/8 4

Corner BracketGalvanized

1/2" hole diameter. Hot rolled steel construction. 3-hole, corner plate bracket.


T-Shaped BracketsGalvanized

9/16" hole diameter. Carbon steel construction. 4-hole, tee plate bracket.


Square WashersGalvanized

Square construction featuring steel, electrogalva-nized finish. Includes 5 per package.

Mfg. No. Order No.Hole Dia.

In.RP1062EG UNI04476 5/16RP1063EG UNI04477 318RP1064EG UNI04478 1/2

Injection Adhesive Anchoring SystemsAC100+ GOLD®

POW8478SD

POW8490SD

Two-component vinylester adhesive anchoring system designed for bonding threaded rod and reinforcing bar hardware into drilled holes in con-crete and masonry based materials. Includes mix-ing nozzle. Meets ICC-ES AC308 criteria and ASTM E 1512 specs.

Mfg. No. Order No. Size8478SD POW8478SD 10 oz.

8490SD POW8490SD 29 oz.

Manual Injection ToolsAC100+ Gold™

High performance manual injecting tool for AC100+™ adhesive.

Mfg. No. Order No. Size Oz.

08495 POW08494 29

Adhesive Mixing NozzlesAC100+™ & PE1000+™

Replacement mixing nozzles. For use with 29oz. AC100+™ adhesive and 13 oz. PE1000+™ epoxy.

Mfg. No. Order No. Pkg. Qty.08294 POW08294 2

Adhesive Anchoring SystemsPE1000+

Two-component, high strength epoxy adhesive anchoring system. Designed for bonding threaded rod and reinforcing bar hardware into drilled holes in concrete based materials.

Mfg. No. Order No. Size Fl. Oz.

0500SD POW0500SD 13

0502SD POW0502SD 20

Manual Injection ToolsPE1000+™ Adhesive

High performance manual injecting dispensing tool for injecting PE1000+™ adhesive.

Mfg. No. Order No. Size Oz.

08298 POW08298 13 & 20 adhesives

Concrete ScrewsTapper®

Designed to meet the needs of most light to medi-um duty applications in concrete, block and brick.

Mfg.No.

OrderNo.

Dia.In.

Lgth.In.

Pkg.Qty.

Hex Head 02700 POW02700 3/16 1-1/4 10002702 POW02702 3/16 1-3/4 10002722 POW02722 1/4 1-3/4 10002724 POW02724 1/4 2-1/4 10002726 POW02726 1/4 2-3/4 10002728 POW02728 1/4 3-1/4 100

2730SD POW02730 1/4 3-3/4 100Phillips Flat Head

02740 POW02740 3/16 1-1/4 10002742 POW02742 3/16 1-3/4 10002762 POW02762 1/4 1-1/4 10002764 POW02764 1/4 2-1/4 10002766 POW02766SD 1/4 2-3/4 10002768 POW02768 1/4 3-1/4 100




www.aih.com

FASTENERSConcrete Screws

Tapper®

Hex head concrete screw is fully threaded for light gauge metal attachment. 5/16" hex head with #3 Phillips. 100 per package.

Mfg. No. Order No. Lgth. In..2200SD POW2200SD 1-3/42202SD POW2202SD 2-1/42204SD POW2204SD 2-3/42206SD POW2206SD 3-1/42208SD POW2208SD 4

Concrete ScrewsTapper®

Phillips flat head concrete screw is fully threaded for light gauge metal attachment. 5/16" hex head with #3 Phillips. 100 per package.

Mfg. No. Order No. Lgth. In..2212SD POW2212SD 2-1/42214SD POW2214SD 2-3/42216SD POW2216SD 3-1/42218SD POW2218SD 4

Concrete AnchorsWedge-Bolt®

Zinc plated, carbon steel body screw anchor with finished hex head. Steel threads along body tap into hole during installation. Designed for struc-tural loading in cracked and uncracked concrete. Use Wedge-Bits™ that match the nominal anchor diameter to drill holes for the anchors.

Mfg. No.

OrderNo.

Size In.Dia. x L

Pkg.Qty.

7210SD POW7210SD 1/4 x 3 100

7224SD POW7224SD 3/8 x 3 50

7244SD POW7244SD 1/2 x 3 50

7246SD POW7246SD 1/2 x 4 50

7262SD POW7262SD 5/8 x 4 25

7266SD POW7266SD 5/8 x 6 25

Concrete BitsSDS-max® — SpeedX™

High drilling speed with inclined side cutters for fast concrete drilling. Compact head for fast dust removal and long life. Active-centering tip pro-vides quick, accurate starts. Wear mark indicator assures accuracy of hole diameter.

Mfg.No.

OrderNo.

Size In.Dia. x L.

UsableLgth. In.

HC5081 BSHHC5081 1-3/8 x 21 16

Concrete SDS-Plus BitsWedge-Bit™

For proper performance the Wedge-Bolt® anchors must be installed with a Wedge-Bit™. It has a spe-cifically matched tolerance range designed to pro-vide optimum performance for the anchor.

Mfg. No.

OrderNo.

Size In.Dia. x L

Usable Lgth. In.

01314 POW01314 1/4 x 6 401316 POW01316 3/8 x 6 401320 POW01320 1/2 x 6 401324 POW01324 5/8 x 8 6

Wedge Expansion AnchorsPower Stud+™ SD1

Fully threaded, torque-controlled, wedge expan-sion anchor is designed for consistent perfor-mance in cracked and un-cracked concrete. Tested in accordance with ACI 355.2 and ICC-ES AC 193. For use in concrete under the design provisions of ACI 318.

Mfg. No. Order No.Lgth. In. Pkg. Qty.

1/4" Diameter7400SD1 POW7400SD1 1-3/4 1007402SD1 POW7402SD1 2-1/4 1007404SD1 POW7404SD1 3-1/4 100

3/8" Diameter7410SD1 POW7410SD1 2-1/4 507412SD1 POW7412SD1 2-3/4 507415SD1 POW7415SD1 3-3/4 507416SD1 POW7416SD1 5 50

1/2" Diameter7420SD1 POW7420SD1 2-3/4 507422SD1 POW7422SD1 3-3/4 507423SD1 POW7423SD1 4-1/2 507424SD1 POW7424SD1 5-1/2 507426SD1 POW7426SD1 7 50

5/8" Diameter7430SD1 POW7430SD1 3-1/2 257432SD1 POW7432SD1 4-1/2 257433SD1 POW7433SD1 5 257434SD1 POW7434SD1 6 257436SD1 POW7436SD1 7 257438SD1 POW7438SD1 8-1/2 25

3/4" Diameter7440SD1 POW7440SD1 4-1/4 207441SD1 POW7441SD1 4-3/4 207442SD1 POW7442SD1 5-1/2 207444SD1 POW7444SD1 6-1/4 207446SD1 POW7446SD1 7 207448SD1 POW7448SD1 8-1/2 107449SD1 POW7449SD1 10 10



FASTENERSSplit Fast Anchors

Flat Head

High-grade steel construction for use in concrete, stone and hard masonry. Exerts expansive pres-sure on inner walls of pre-drilled holes, creating secure mounting. 1/4" diameter; minimum embed-ment 1-1/8".

Order No. Lgth. In. Pkg. Qty.PFC24458 1-1/2 100PFC24460 2 100PFC24461 2-1/2 100PFC24464 3 100PFC24470 4 100

Nail Drive AnchorsZamac Nailin®

The Zamac Nailin® is a nail drive anchor which has a body formed from Zamac alloy. Drive nails are carbon steel. The anchor can be used in con-crete, block, brick or stone.

Mfg. No. Order No.

Dia. In.

Lgth. In.

Pkg. Qty.

02806 POW02806 1/4 3/4 10002808 POW02808 1/4 1 10002814 POW02814 1/4 1-1/4 10002820 POW02820 1/4 1-1/2 10002826 POW02826 1/4 2 100

Nail Drive AnchorsZamac Hammer-Screw®

The Zamac Hammer-Screw® is a unique, one-step nail drive anchor featuring a Phillips type flat head and a screw thread for use in concrete, block, brick or stone.Mfg. No. Order No. Dia. In. Lgth. In. Pkg. Qty.

02842 POW02842 1/4 1-1/4 10002844 POW02844 1/4 1-1/2 100

Drop-In AnchorsZinc

Can be used in solid con-crete, hard stone, and solid block base materials.

Mfg. No. Order No. Size In.

Pkg. Qty.

06324 POW06324 1/4 10006326 POW06326 3/8 5006328 POW06328 1/2 5006320 POW06320 5/8 2506312 POW06312 3/4 10

Drop-In AnchorsSetting Tool

For setting drop-in anchors.

Mfg. No. Order No. Size In.06305 POW06305 1/406307 POW06307 3/806309 POW06309 1/206311 POW06311 5/806313 POW06313 3/4

Concrete Forming SpikesDuplex Head

The SPIKE® anchor is a one-piece, tamper-proof vibration resistant anchor for use in con-crete, block, brick or stone. The SPIKE® anchor is formed with an S-shaped configuration at the working end of the anchor to create an expansion mechanism.

Mfg. No. Order No. Dia. In.

Lgth. In.

Pkg. Qty.

03794 POW03794 1/4 2-3/4 100

Adhesive Anchoring AccessoriesHand Pump / Dust Blower

Used in preparation with various anchoring appli-cations and for supporting proper anchor instal-lation.

Mfg. No. Order No. Desc.08280 POW08280 Dust blowout pump

Wire BrushesHole Clean Out

Steel wire brush for cleaning out holes in concrete or masonry before installing mechanical or epoxy anchor system.

Mfg.No.

OrderNo.

Dia.In.

Lgth. In.

Hole Dia. In.*

08284 POW08284 3/8 6-3/4 7/1608285 POW08285 1/2 6-3/4 9/1608286 POW08286 5/8 7-7/8 11/1608287 POW08287 3/4 7-7/8 7/808289 POW08289 1 11-7/8 1-1/808290 POW08290 1-1/4 11-7/8 1-3/808291 POW08291 1-1/2 11-7/8 1-1/2

* ANSI Hole Size

Drill Adaptersfor Steel Brush

Attaches to drill chuck for fast cleanout with steel brushes (sold seperately).

Mfg. No. Order No. Desc.08296 POW8296 For 3/8" and 1/2" chucks

Rod Hanging SystemsVertigo®

One-piece, all steel threaded fastening system for suspending steel threaded rod vertically overhead in pipe hanging, fire protection, electrical conduit and cable-tray applications.

Mfg. No.

OrderNo.

Rod Size In.

Screw Shank and Lgth. In.

Pkg. Qty.

Steel Vertical Hanger07158 POW07158 3/8 1/4–20 x 1 10007159 POW07159 3/8 1/4–20 x 1-1/2 100

Wood Vertical Hanger07162 POW07162 3/8 3/8 x 2-1/2 100

07163 POW7163 1/4 1/4 x 2 100

07165 POW07165 3/8 1/4 x 2 100

07203 POW07203 3/8 1/4 x 1 100

Vertigo SocketsUniversal

1/4" hex shaft fits drill or impact driver for fast in-stallation of vertigo threaded rod hangers.

Mfg. No. Order No. Color07187 POW07187 Red




www.aih.com

FASTENERSPowder-Actuated Tools

Semi-Automatic Kit

Low velocity, semi-automatic .27 caliber tool used to install .300 head drive pins, 8mm head drive pins and 1/4"-20 threaded studs, up to 3" in total length. Uses 10 load strips at high speed and re-petitive volume applications. The P3500™ Deluxe Kit includes: safety glasses, disposable ear plugs, allen wrenches, wire brushes, tool lubricant, spall guard, pin starter kit, and plastic case.

Mfg.No.

OrderNo.

PinLgth. In.

Lgth.In.

Wt. Lbs.

52000 POW52000 1/2 — 3 13-5/8 5

Powder-Actuated ToolsSingle-Shot

The P2201™ is a low velocity, single-shot, .22 caliber tool used to install .300 head drive pins, 8mm head drive pins and 1/4"-20 threaded studs, up to 3" in total length. The P2201™ is designed for maintenance or residential contractors.

Mfg.No.

OrderNo.

Pin Lgth. In.

Lgth.In.

Wt. Lbs.

52007 POW52007 1/2 – 3 12-1/2 4.3

Powder-Actuated ToolsHammer Drive

The P1000™ is a .22 caliber, hammer actuated do-it-yourself tool. Engineered for high reliability, low maintenance, and speed. Used in remodeling, electrical fixtures, maintenance and telecommuni-cation applications.

Mfg.No.

OrderNo.

Pin Lgth. In.

Lgth. In.

Wt. Lbs.

52013 POW52013 1/2 – 3 13 3

Drive Pins

Drive pins for permanently fastening fixtures to concrete, some types of concrete block and A36 or A572 structural steel. Head size: .300"; Shank size: .145".

Mfg. No. Order No. Lgth. In. Pkg. Qty.

50022 POW50022 3/4 10050026 POW50026 1 10050032 POW50032 1-1/4 10050034 POW50034 1-1/2 10050038 POW50038 2 10050044 POW50044 2-1/2 100

Drive PinsWith Washers

Drive pins with 7/8" washers provide resistance to pullover. For permanently fastening fixtures to concrete. Head size: .300": shank size: .145".


50090 POW50090 1 10050092 POW50092 1-1/4 10050094 POW50094 1-1/2 10050096 POW50096 2 10050098 POW50098 2-1/2 10050100 POW50100 3 100

Powder-Actuated ToolsPowder Loads

POW50504

POW50630, POW50626, POW50622Powder-actuated tool loads.

Mfg. No. Order No. Color

Pkg. Qty.

.22 Caliber Single Loads50504 POW50504 Green 10050506 POW50506 Yellow 100

.27 Caliber Strip Loads

50622 POW50622 Green 1050626 POW50626 Yellow 1050630 POW50630 Red 10

Flat BarsSteel

1/8" thick. Zinc-plated.Mfg. No. Order No. Dim. In. L x W

1201/11088 STW11088 36 x 3/41203/11090 STW11090 36 x 11205/11092 STW11092 36 x 1-1/4

Flat Steel BarsWeldable

Mfg. No. Order No.Dim. In. H x

W x L0701/11647 STW50701 1/8 x 1/2 x 360703/11649 STW51610 1/8 x 1/2 x 720704/11650 STW50704 1/8 x 3/4 x 360705/11651 STW51411 1/8 x 3/4 x 48

0706/11652 STW50706 1/8 x 3/4 x 720707/11653 STW50707 1/8 x 1 x 360708/11654 STW11654 1/8 x 1 x 48

000709/11655 STW11655 1/8 x 1 x 720710/11656 STW50710 1/8 x 1-1/4 x 360711/11657 STW51412 1/8 x 1-1/4 x 480712/11658 STW50712 1/8 x 1-1/4 x 720713/11659 STW50713 1/8 x 1-1/2 x 360714/11660 STW51413 1/8 x 1-1/2 x 480717/11663 STW51414 1/8 x 2 x 480719/11665 STW50719 1/8 x 3 x 360749/11686 STW50749 1/4 x 1-1/2 x 360751/11688 STW50751 1/4 x 1-1/2 x 72

11828 STW11828 1/4 x 3 x 72

Hot Rolled Steel PlatesWeldable

Used in a variety of industrial and farm machinery welding applications. Plain finish.

Mfg. No. Order No. Dim. In.

11806 STW11806 1/4 x 4 x 1211807 STW11807 1/4 x 12

x 12



FASTENERS

Angle BarsSteel

Zinc-plated. 1/8" thickness.

Mfg. No. Order No. Dim. In. H x W x L52301/11123 STW11123 3/4 x 3/4 x 36

11124 STW11124 1 x 1 x 3652303/11125 STW52303 1-1/4 x 1-1/4 x 36

Angled Steel BarsWeldable

13 ga. steel.

Mfg. No. Order No. Dim. In. H x W x L0804/11700 STW50804 1/8 x 3/4 x 360805/11701 STW53411 1/8 x 3/4 x 480806/11702 STW53611 1/8 x 3/4 x 720807/11703 STW50807 1/8 x 1 x 360808/11704 STW53401 1/8 x 1 x 480809/11705 STW53601 1/8 x 1 x 720810/11706 STW50810 1/8 x 1-1/4 x 360811/11707 STW53412 1/8 x 1-1/4 x 480813/11709 STW50813 1/8 x 1-1/2 x 360814/11710 STW53413 1/8 x 1-1/2 x 480815/11711 STW53613 1/8 x 1-1/2 x 720817/11713 STW53414 1/8 x 2 x 48

11719 STW11719 1/4 x 1-1/2 x 36

Slotted Steel StrapsZinc-Plated

Flat, zinc-plated, slotted, steel strap. 18 ga.

Mfg. No. Order No. Dim. In. W x L1433/11142 STW51433 2-1/4 x 36

11145 STW11145 2-1/4 x 72

Slotted BarsGalvanized

1-3/8" wide, 14 gauge steel.

Mfg. No. Order No. Lgth. In.1401/11139 STW60301 361402/11140 STW60401 481403/11141 STW60601 72

Perforated Angle BarsSteel

Measures 1-1/4" x 1-1/4".

Mfg. No. Order No. Lgth. Ft.

12 Ga.1533/11133 STW51533 3

1536/11135 STW51536 6

16 Ga.1153/11136 STW51553 3

1156/11138 STW51556 6

Steel Slotted Angle BarsZinc-Plated

Mfg.No.

OrderNo.

Dim. In.H x W x L

SteelGauge

1513/11112 STW515131-1/4 x 1-1/4

x 36 18

1516/11115 STW515161-1/4 x 1-1/4

x 7218

61101/11104 STW611011-1/2 x 1-1/2

x 1214

Slotted Angle BarsGalvanized

Measures 1-1/2" H x 1-1/2" W. 14 gauge

Mfg. No. Order No. Lgth. In.1503/11111 STW61601 721501/11109 STW61301 36

Steel Slotted Angle BarsZinc-Plated — Offset

14 gauge steel.

Mfg. No. Order No. Dim. In. H x W x L

11117 STW51523 2-1/4 x 1-1/2 x 36

1524/11118 STW51524 2-1/4 x 1-1/2 x 48

Round RodsCold Rolled

36" length. Zinc-plated.

Mfg. No. Order No. Dia.In.1600/11150 STW30301 3/161601/11151 STW30302 1/41602/11152 STW30303 5/161603/11153 STW30304 3/830305/11223 STW30305 7/161604/11154 STW30306 1/21605/11155 STW30307 5/81606/11156 STW30308 3/430310/11166 STW30310 1




www.aih.com

FASTENERSSteel Rods

Weldable — Round

Mfg. No. Order No. Dim. In. Dia. x L0001/11593 STW50001 1/4 x 36

0002/11594 STW31402 1/4 x 48

0003/11595 STW31602 1/4 x 72

0004/11596 STW50004 5/16 x 36

0005/11597 STW31403 5/16 x 48

0008/11600 STW31404 3/8 x 48

0012/11604 STW31405 1/2 x 48

0401/11627 STW80401 1/8 x 36

0402/11628 STW31400 1/8 x 48

0403/11629 STW80403 3/16 x 36

0404/11630 STW31401 3/16 x 48

KeystockSteel

12" length. Zinc-plated.

Mfg. No. Order No. Size In.1650/11172 STW40101 1/8

1653/11173 STW40103 3/16

1656/11174 STW40105 1/4

1659/11175 STW40106 5/16

1662/11176 STW40107 3/8

5100/11185 STW40108 7/16

1665/11177 STW40109 1/2

Steel BarsWeldable — Square

Mfg. No. Order No. Thick. In. Lgth. In.0601/11643 STW80601 3/8 360604/11645 STW50604 1/2 36

Steel TubesWeldable — Round

Plain finish.Mfg. No. Order No. Dim. In. Dia. x L

11747 STW11747 1/2 x 3611748 STW11748 3/4 x 3611749 STW11749 1 x 36

Steel TubesWeldable — Square

Mfg. No. Order No. Dim. In. W x L1001/11735 STW51001 1/2 x 361003/11737 STW51003 1/2 x 721004/11738 STW51004 3/4 x 361005/11739 STW45411 3/4 x 481006/11740 STW51006 3/4 x 721007/11741 STW51007 1 x 361008/11742 STW45412 1 x 481009/11743 STW51009 1 x 72

Steel TubesPerforated — Telescoping

Zinc plated. 12-gauge. Smaller size can be inserted into next biggest diameter to create telescoping effect. Mfg. No. Order No. Dim. In. W x L

11190 STW11190 1 x 7211196 STW11196 1-1/2 x 72

Telescoping Steel Tube Accessories

STW11206 STW11207

Steel construction, 10 guage and zinc plated. Used to strengthen or hold together telescoping steel tubes.

Mfg. No. Order No. Desc.

11206 STW11206 Inside angle bracket

11207 STW11207 Gusset

Aluminum BarsFlat

Mfg. No. Order No. Dim. In. H x W x L6201/11288 STW56201 1/8 x 3/4 x 366205/11292 STW56205 1/8 x 1 x 366207/11294 STW56207 1/8 x 1 x 726215/11299 STW56215 1/8 x 1-1/2 x 366217/11301 STW56217 1/8 x 1-1/2 x 726220/11303 STW56220 1/8 x 2 x 36

Aluminum BarsAngle

Mfg No. Order No. Dim. In. H x W x L6405/11329 STW56405 1/8 x 3/4 x 36

6410/11333 STW56410 1/8 x 1 x 36

6412/11335 STW56412 1/8 x 1 x 72

6415/11338 STW56415 1/8 x 1-1/2 x 36

6417/11340 STW56417 1/8 x 1-1/2 x 72

6425/11347 STW56425 1/16 x 3/4 x 36

6427/11349 STW56427 1/16 x 3/4 x 72

6430/11351 STW56430 1/16 x 1 x 36

6432/11353 STW56432 1/16 x 1 x 72

6434/11355 STW56434 1/16 x 1-1/2 x 36



FASTENERSAluminum Rods

Round


6010/11273 STW56010 3/8 x 36

11277 STW11277 1/2 x 36

Brass RodsRound


0302/11518 STW32302 3/16 x 36

0303/11519 STW32303 1/4 x 36

0304/11520 STW50304 5/16 x 36

0305/11521 STW50305 3/8 x 36

0306/11522 STW50306 1/2 x 36

Aluminum TubesRound

Mfg. No. Order No. Dim. In Dia. x L6712/11399 STW56712 3/4 x 726718/11404 STW56718 1 x 72

Aluminum TubesSquare

Mfg. No. Order Dim. In. W x L6607/11388 STW56607 3/4 x 726615/11389 STW56615 1 x 366617/11391 STW56617 1 x 72

Aluminum Trim Channels

Aluminum construction. Used to tightly encase 3/4" plywood or plexiglass.

Mfg. No. Order No. Dim. In. W x L

11385 STW11385 3/4 x 96

Steel SheetsWeldable

Weldable steel sheet.

Mfg. No. Order No. Dim. In. L x W16 Ga.

11763 STW11763 12 x 2411766 STW11766 24 x 24

22 Ga.18015/11811 STW18015 6 x 1818025/11812 STW18025 6 x 2418055/11815 STW18055 12 x 1818065/11816 STW18065 12 x 2418095/11817 STW18095 24 x 241812/11778 STW51812 24 x 36

Steel SheetsStainless

22 gauge, stainless steel sheet.

Mfg. No. Order No. Dim. In. L x W11591 STW57601 18 x 6

Steel SheetsGalvanized

26 gauge steel.

Mfg. No. Order No. Dim. In. L x W19035/11225 STW19035 12 x 1819045/11226 STW19045 12 x 2419055/11227 STW19055 24 x 24

Sheet MetalSteel — Perforated

16 gauge (.0598") construction. Features 3/16" x 1/4" staggered holes. Weldable.

Mfg. No. Order No. Dim. In.2205/11796 STW52205 24 x 24

Expanded Steel SheetsWeldable

13 gauge

Mfg.No.

OrderNo.

MeshWidth In.

Dim. In.L x W

2102/11780 STW52102 3/4 24 x 24

2202/11795 STW52202 1/2 24 x 24




www.aih.com

FASTENERSAluminum Sheets

.025" thick.

Mfg. No. Order No. Dim. In. L x W20015/11483 STW20015 6 x 1820025/11484 STW20025 6 x 2420055/11486 STW20055 12 x 1820095/11487 STW20095 24 x 24

Tread Plates

Mfg.No.

OrderNo.

Dim. In.L x W

Thick.In.

Standard Aluminum2050/11248 STW52050 12 x 24 .063

Steel2220/11799 STW52220 12 x 24 .075

Hitchpins

Red plastisol-coated head. Constructed from heat-treated, high tensile steel. Includes hairpin clip.

Mfg.No.

OrderNo.

ShaftDia. In.

UsableLgth. In.

H12/00113 DHH00113 1/2 3-5/800123 DHH00123 5/8 5-1/2

H43/00133 DHH00133 3/4 6-1/2H100-45 DHH00253 1 4-1/2

Lynchpins

Yellow zinc-plated with flag. Fits top link and lift pins.Mfg. No.

Order No.

Shaft Dim. In.Dia. x L

FitsCategory

OALIn.

81911 DHH81911 3/16 x 1-1/8 0 1-5/881922 DHH81922 1/4 x 1-1/4 1 2-1/881933 DHH81933 5/16 x 1-1/4 1 & 2 2-1/8

Wirelock Pins

Yellow zinc-plated with flag. 2" shank length.

Mfg. No.

Order No.

Shaft Dim. In.Dia. x L

OALIn.

WireType

81975 DHH81975 1/4 x 1-3/4 2-1/4 Round81971 DHH81971 1/4 x 2-1/4 3 Square21992 DHH81992 3/8 x 1-3/4 2-5/16 Round21994 DHH81994 3/8 x 2-1/2 3-7/16 Square81981 DHH81981 5/16 x 2-1/4 3 Square81987 DHH81987 5/16 x 2-1/4 3 Round

Clevis PinsAdjustable

Multiple holes for multiple length applications. Extra length can be cut off if needed. Yellow zinc-plated finish. Clamshell packed.

Mfg. No.

OrderNo.

Dia.In.

Lgth.In.

Pkg.Qty.

32720 DHH32720 1/4 2 432730 DHH32730 5/16 2 332740 DHH32740 3/8 2 232742 DHH32742 3/8 3 232758 DHH32758 7/16 3 232765 DHH32765 1/2 2-1/2 232770 DHH32770 1/2 4 2

Clevis Pin SetsAdjustable

Kwic Kit Set Contents

Dim. In. Qty.3/16 x 1-1/2 4

1/4 x 2 35/16 x 1-1/2 3

5/16 x 2 33/8 x 2 37/16 x 2 2

Clevis Pin Sets

Mfg. No. Order No. Desc.15008 DHH15008 18-pc. Kwic Kit

Clevis PinsAssortment

Most popular clevis pin assortment set.

Mfg. No. Order No.Pc. Qty.

W5359 WIM15990 74



FASTENERS

Bent Pins

Universal pin for use on agricultural, recreational, industrial and construction equipment. Replaces clevis pins; easy to install and remove. Zinc-plated. Includes hairpin clip. Individually packed.

Mfg. No.

OrderNo.

Dia.In.

UsableLgth. In.

30312 DHH30312 1/2 330320 DHH30320 5/8 3

Hitchpin Clips

Constructed from zinc-plated spring steel wire. Clamshell packaging for display or resale.

Mfg. No.

OrderNo.

WireDia. In.

Fits HoleSize In.

OALIn.

Pkg.Qty.

30821 DHH30821 .062 5/64 1-5/16 930841 DHH30841 .093 7/64 2 1030850 DHH30850 .125 9/64 2-9/16 630860 DHH30860 .125 9/64 1-15/16 630870 DHH30870 .148 5/32 2-15/16 530880 DHH30880 .177 3/16 3-3/4 2

Hitchpin Clip Sets

Also known as hairpin clips.Set Contents

Kwic Kit – 11070 Kwic-Pak – 17070

Clip No.Wire

Sz. In. Qty.ClipNo.

WireSz. IN. Qty.

237 .054 25 237 .054 4225 .072 25 228 .093 4228 .093 12 216 .125 4211 .125 12 210 .148 3210 .148 4208 .177 2

Hitchpin SetsMfg. No. Order No. Desc.

11070 DHH11070 80-pc. Kwic Kit

17070 DHH1707015-pc. Kwic-

Pak

Cotter Pin SetsKwic-Pak

For agricultural, industrial and home use.SET CONTENTS

Dimension Inches Dia. x L Qty.3/32 x 1 10

3/32 x 1-1/2 101/8 x 1 5

1/8 x 1-1/2 55/32 x 1 4

5/32 x 1-1/2 43/16 x 1-1/2 4

3/16 x 2 41/4 x 2 25/16 x 2 2

Cotter Pin SetsMfg. No. Order No. Desc.

17010 DHH1701050-pc. cotter pin Kwic-

Pak

Woodruff Key SetsKwic Kit

SET CONTENTS

No. Size In. Qty.#3 1/8 x 1/2 10#5 1/8 x 5/8 10#6 5/32 x 5/8 5#9 3/16 x 3/4 5#A 1/4 x 7/8 5#15 1/4 x 1 5

Woodruff Key Sets


11110 DHH1111040-pc. Kwic

Kit

Safety ClipsStainless Steel

Non-corrosive, non-slip design. Replaces hair-pin clips and cotter pins in many industrial uses. Carded.

Mfg. No.

OrderNo.

WireDia. In.

OALIn.

Pkg.Qty.

10282 DHH10282 1/8 2-1/2 2410290 DHH10290 5/32 3-3/4 24

Hardware Caddies1000 pc. Hardware Assortment

For craft and household applications. Includes wood, sheet metal and machine screws, hex nuts, washers, picture hangers, pushpins/thumbtacks, nails, plastic anchors, cup hooks and two empty trays. 1000 pieces.


W5199 WIM15899 Hardware caddy

E-Clip SetsKwic Kit

Set Contents

No. Size In. Qty.E-18 3/16 30E-25 1/4 30E-37 3/8 15E-50 1/2 10E-62 5/8 10E-75 3/4 5

E-Clip Sets


11030 DHH11030100-pc. Kwic

Kit




www.aih.com

FASTENERSAlligator Clips

Assortment

24pc Alligator Clip Assortment.

Includes: (8) Pieces Mini Alligator Clips,

(4) Pieces Alligator Clips 2"(6) Pieces Alligator Clips 1-1/2"

(2) Pieces Charging Clips 10 Amp(2) Pieces Charging Clips 25 Amp(2) Pieces Charging Clips 30 Amp.

Mfg. No. Order No. Desc.W5209 WIM10667 24-Pc Set.

Roll PinsAssortment

Includes varying lengths from 5/32" to 3/16".

Mfg. No. Order No. Pc. Qty.

W5340 WIM15940 120

Hardware Assortments

WIM15900

WIM15905

WIM15910

WIM15912

WIM15914

WIM15915

Mfg. No. Order No. Desc.W5200 WIM15900 200-Pc. spring assortment

W5204 WIM15905 1000-Pc. cotter pin assortment

W5210 WIM15910 150-Pc. hair pin assortment

W5212 WIM15912 300-Pc. snap ring assortment

W5214 WIM15914125-Pc. rubber grommet

assortmentW5215 WIM15915 70-Pc. grease fitting assortment

Fastener Assortments

Durable and reusable container. Contains enough items to complete multiple projects.Mfg. No.

Order No. Desc.

14991 MFC14991 92 pc. hook & eye asst.14992 MFC14992 175 pc. picture hanger asst.14993 MFC14993 336 pc. handyman fastener asst14994 MFC14994 662 pc. household fastener asst.14995 MFC14995 1345 pc.nail/tack/brad asst.14997 MFC14997 235 pc. nut/washer asst.14998 MFC14998 221 pc. wood/sheet metal screw asst.14999 MFC14999 77 pc. anchor asst.

Snap Fastener Kits

Snap fasteners easily join two pieces of fabric. Kit includes a two-piece setting tool and six fastener sets.

Mfg. No. Order No. Desc.1265 GEN1265 Snap fastener kit

Screw Fastener Kits

Screw fasteners for attaching cover, tarps, and other fabrics. Kit includes a two-piece setting tool and six fastener sets.

Mfg. No. Order No. Desc.1267 GEN1267 Screw fastener

kit



FASTENERSO-Ring Sets

32 sizes, from 1/16" x 1/4" to 1/8" x 2-1/4". R e -sealable plastic case.Mfg No. Order No. Desc.

15902 WIM15902 407-Pc. O-ring assortment

Hollow Wall Anchors

For use in thin materials including wallboard, plas-ter and paneling. Prongs grip material, prevent-ing rotation while anchor is being set. As screw is turned, anchor expands to secure itself against medium.

OrderNo.

AnchorSize In.

ScrewLgth. In.

HoleSize In.

Pkg.Qty.

Standard Machine Screw — 6-32 SizePFC26882 1/8 1-1/2 5/16 100PFC26880 1/8 2 5/16 100

Standard Machine Screw — 10-24 SizePFC26891 3/16 2-1/4 3/8 100PFC26889 3/16 2-3/4 3/8 100

Standard Machine Screw — 1/4 -20 SizePFC26878 1/4 2-1/4 1/2 100PFC26877 1/4 2-3/4 1/2 100

Drive Point Screw — 6-32 SizePFC26897 1/8 1-3/4 5/16 100PFC26896 1/8 2-11/32 5/16 100

Conical Plastic Anchors

For light-duty use in concrete, brick, masonry or drywall. Ridged plastic helps eliminate spinning while screw is being inserted.

Order No. Dia. In. Lgth. In.

Pkg. Qty.

PFC27816 3/16 7/8 100

PFC01225 1/4 1 100

PFC01202 5/16 1-3/8 100

Hollow Wall AnchorsDrillerToggle™

Self-drilling. Fast and easy to install with no pre-drilling required. Supplied with bolt. Rustproof. Suitable materials are drywall and baseboard.

Mfg. No. Order No. Desc.Pkg. Qty.

023-01-2330-410

PFC82719 Zinc/Nylon 12

Wallboard AnchorsZip-It®

The Zip-It® anchor is a one piece self drilling an-chor designed for use in hollow gypsum wallboard for light duty loads. Made from engineered nylon and for use with No. 6, 8 or 10 screws in 3/8" to 1" wallboard.


Pkg. Qty.

02345 POW02345 Nylon 10002346 POW02346 Metal 100

Drywall AnchorsScrew-In

#8 nylon. Mfg.No.

OrderNo. Desc.

Pkg. Qty.

02301-0807-410

PFC79621 Nylon anchor 25

02301-0800-410

PFC80641 Zinc anchor 25

Plastic Anchor Kits

Includes one 4" carbide masonry drill bit.PFC27410: Set contains 50 blue plastic anchors and 100 1" combination phillips/slotted hardened sheet metal screws.PFC27360: Set contains 100 blue plas-tic anchors and 100 1" combination phillips/slotted hardened sheet metal screws.

Mfg.No.

OrderNo.

Drill Dia.In.

ScrewSize

02306-6810-400

PFC27410 3/16 #6

02306-1012-400

PFC27360 1/4 #10

Toggle BoltsRound Head

For use in hollow wall, plaster, hollow tile and blocks. Zinc-plated.

Mfg.No.

OrderNo.

Dia.In.

Lgth.In.

HoleSize In.

Pkg.Qty.

00413-2024-411 PFC27467 1/8 2 3/8 100

00413-2030-411 PFC27487 1/8 3 3/8 100

00413-2040-411

PFC27501 1/8 4 3/8 100

00413-2324-411

PFC27504 3/16 2 1/2 100

00413-2330-401

PFC18713 3/16 3 1/2 100

00413-2340-411

PFC27531 3/16 4 1/2 100

00413-2430-401

PFC27769 1/4 3 5/8 50

00413-2440-401

PFC18744 1/4 4 5/8 25

00413-2460-411

PFC27449 1/4 6 5/8 50

00413-2640-411

PFC27547 3/8 4 1 25




www.aih.com

FASTENERSToggle Straps

Hollow Wall

4" hollow wall strap with carbon steel wing and locking cap. Can be installed through small holes. Does not require a fixture or screw to set. 50 per package.

Mfg. No. Order No.Dia. In.

4052 POW4052 3/164054 POW4054 1/44056 POW4056 3/84058 POW4058 1/2

Air/Hydraulic Riveters

For use in setting 3/32" to 3/16" diameter rivets. 1,940-lb. pulling force. .551" stroke.

Mfg. No. Order No. PSIV-2/79014 MAR79014 85 to 95

Rivet Tool Kits200 Kit™

Includes molded plastic case, HP-2® hand riveter and 200 Klik-Fast™ rivets in common sizes.

Mfg. No. Order No. Desc.39001-200 MAR39001 Hand riveter kit

Rivet ToolsBig Daddy®

Self-adjusting two-piece jaws. Single-unit steel body with extra-long handles and vinyl grips. In-cludes 5/32", 3/16" and 1/4" nosepieces stored on body.

Mfg. No. Order No. Max. Rivet Size In.39031 HP-5 MAR39031 1/4

Rivet ToolsHP-2®

Aluminum body, carbon steel upper handle and thick vinyl grips. Includes 3/32", 1/8", 5/32" and 3/16" nosepieces and service wrench.

Mfg. No. Order No.Max. Rivet Size

In.39000 HP-2 MAR39000 3/16

Rivet ToolsTwister™

Gun head rotates 360º to reach difficult areas. Comfortable, hi-viz, non-slip vinyl grip with spring loaded handle for easy loading. Lock clip on han-dle for compact storage. Extended nose for hard to get at places. Durable all steel construction. Uses rivets 3/32", 1/8", 5/32" and 3/16" diameter. Includes four nose pieces and wrench.


RHT300 ARORHT300Rivet tool w/ rotating

head

Rivet Tools

Extended reach nose for hard to get at places. Comfortable, hi-viz, non-slip vinyl grip. with spring loaded handle for easy loading. Lock clip on handle for compact storage. Durable all steel con-struction. Uses rivets 3/32", 1/8", 5/32" and 3/16" diameter. Includes four nose pieces and wrench.


RH200S ARORH200SRivet tool w/Extended

nose

Rivet Tools

Durable all steel construction. Comfortable, hi-viz, non-slip vinyl grip. With spring loaded handle for easy loading. Changeable nose pieces take 1/8" and 5/32" diameter rivets in one hole and 3/16" in other hole. Not recommended for use with 3/16" all-steel rivets.


RL100S ARORL100S Rivet tool

Rivets

Mfg.No.

OrderNo.

Dia.In.

Lgth.In.

Pkg.Qty.

Steel — Buttonhead40100 SB3-2 MAR40100 3/32 .250 50040112 SB4-2 MAR40112 1/8 .275 50040115 SB4-3 MAR40115 1/8 .337 50040117 SB4-4 MAR40117 1/8 .400 50040121 SB4-6 MAR40121 1/8 .525 50040122 SB4-8 MAR40122 1/8 .650 50040135 SB5-4 MAR40135 5/32 .425 50040147 SB6-4 MAR40147 3/16 .450 50040149 SB6-6 MAR40149 3/16 .575 50040152 SB6-8 MAR40152 3/16 .700 500

SB8-4 MAR42181 1/4 .250 100SB8-6 MAR42183 1/4 .275 100SB8-8 MAR42185 1/4 .500 100

Steel — Large Flange40150 SBL6-6 MAR40150 3/16 .575 500

40160 SBL6-12 MAR40160 3/16 .950 500Aluminum — Buttonhead

40212 AB4-2A MAR40212 1/8 .275 50040217 AB4-4A MAR40217 1/8 .400 50040220 AB4-5A MAR40220 1/8 .462 50040221 AB4-6A MAR40221 1/8 .525 50040222 AB4-8A MAR40222 1/8 .650 50040245 AB6-2A MAR40245 3/16 .325 50040247 AB6-4A MAR40247 3/16 .450 50040249 AB6-6A MAR40249 3/16 .575 50040252 AB6-8A MAR40252 3/16 .700 500

AB8-6A MAR42283 1/4 .275 100AB8-8A MAR42285 1/4 .250 100AB8-12A MAR42289 1/4 .750 100

Aluminum — Large Flange40250 ABL6-6A MAR40250 3/16 .575 50040253 ABL6-8A MAR40253 3/16 .700 500

Stainless SteelSSB4-4S MAR40417 3/16 .250 500



FASTENERS

Rivets

Aluminum Steel

Mfg.No.

OrderNo.

RivetDia.In.

GripLgth.In.

Pkg.Qty. Size

AluminumRSA18 ARO00803 1/8 1/8 25 Short

RSA18IP ARO00820 1/8 1/8 100 Short

RSAW18IP* ARO00832 1/8 1/8 100 Short

RMA18 ARO00804 1/8 1/4 20 Medium

RMA18IP ARO00821 1/8 1/4 100 Medium

RLA18 ARO00805 1/8 1/2 15 Long

RLA18IP ARO00822 1/8 1/2 100 Long

RSA532 ARO00809 5/32 1/8 20 Short

RSA532IP ARO00826 5/32 1/8 50 Short

RMA532 ARO00810 5/32 1/4 20 Medium

RMA532IP ARO00827 5/32 1/4 50 Medium

RLA532 ARO00811 5/32 1/2 15 Long

RLA532IP ARO00828 5/32 1/2 50 Long

RSA316 ARO00812 3/16 1/8 18 Short

RSA316IP ARO00829 3/16 1/8 50 Short

RMA316 ARO00813 3/16 1/4 15 Medium

RMA316IP ARO00830 3/16 1/4 50 Medium

RLA316 ARO00814 3/16 1/2 12 Long

RLA316IP ARO00831 3/16 1/2 50 Long

RSAW18* ARO00815 1/8 1/8 25 Short

SteelRSS18 ARO00806 1/8 1/8 25 Short

RSS18IP ARO00823 1/8 1/8 100 Short

RMS18 ARO00807 1/8 1/4 20 Medium

RMS18IP ARO00824 1/8 1/4 100 Medium

RLS18 ARO00808 1/8 1/2 15 Long

RLS18IP ARO00825 1/8 1/2 100 Long

* White

Flange RivetsLarge

For heavy duty jobs. Stainless steel construction. Not recommended for use with manual rivet tools.

Mfg. No. Order No. Dia. In.RLFA316IP ARO00888 3/16

Rivets

Assortment of 120 aluminum and steel rivets or-ganized in divided shell.

Contents

Size In. Material Qty.1/8 x 1/8 Aluminum 251/8 x 1/4 Aluminum 201/8 x 1/2 Aluminum 151/8 x 1/8 Steel 251/8 x 1/4 Steel 201/8 x 1/2 Steel 15

Rivets


RK6120 ARO06120Rivet

assortment

Back-Up Washers

Round. .056" thick.Mfg.No.

OrderNo.

SizeIn.

For HoleSize In.

Pkg.Qty.

Aluminum40660 AS-10

MAR40660 1/2 3/16 500

Steel40661 SS-10

MAR40661 1/2 3/16 500

Washers

Mfg. No.

OrderNo.

HoleDia. In.

Qty.Pkg. Desc.

WA1/8 ARO00816 1/8 30 AluminumWS1/8 ARO00818 1/8 40 SteelWA3/16 ARO00817 3/16 30 Aluminum

Insert Installation KitsThread-Setter™

Includes No. 39200 Thread-Setter™ tool with mandrels and nosepieces for sizes 6-32, 8-32, 10-24; mandrel for size 1/4”-20; assortment of 103 Klik® Rivet-Nuts and Klik® Poly-Nuts. Packaged in plastic case with wrench and instructions.Mfg. No. Order No. Desc.

39301 MAR39301 Insert installation kit




www.aih.com

FASTENERSAluminum Rivet Nuts

Klik®

Flathead design. For use in metal, plastic and fiber-glass too thin for tapped threads. Provides perma-nent captive threads for screws and bolts.

Mfg. No.

OrderNo.

ThreadSize

HeadDia. In.

Lgth.In.

Pkg.Qty.

47221 MAR47221 8 - 32 .337 .500 50

47232 MAR47232 10 - 24 .406 .594 50

47252 MAR47252 1/4" - 20 .475 .687 40

47271 MAR47271 5/16" - 18 .665 .750 25

Staple GunsJT-21™

Jam resistant mechanism, buit-in staple lifter. Vi-sual refill window. Steel construction, chrome fin-ish. Accepts 1/4, 5/16 and 3/8" staples.

Mfg. No. Order No. Desc.JT-21CM AROJT21CM Staple Gun

Staple Guns

Jam resistant, double leverage operation. Visual refill window. Steel construction, chrome finish. Accepts .050 guage staples of 1/4, 5/16, 3/8, 1/2 and 9/16" lengths plus CEILTILE® ceiling tile staples.

Mfg. No. Order No. Desc.T-50 AROT50 Staple gun

Staple GunsT2025

For use with both round and flat crown staples. Accepts 9/32, 3/8, 7/16 and 9/16" round staples as well as 5/16, 3/8 and 1/2" flat crown staples. Built-in staple height adjustment guide.

Mfg. No. Order No. Desc.T2025 AROT2025 Round & flat crown stapler

Plier-type StaplersHeavy Duty

All steel construction, chrome finish. Hand guide loop. Cam actuated double leverage mechanism. 2 1/2" throat for better reach. Loads 1/4" and 3/8" staples.

Mfg. No. Order No. Mag. Cap.

P-35 AROP35 85

Wire TackersT-59™

Grooved guide. Jam resistant loading mechanism. For low voltage wire up to 5/16" diameter. UL Listed.

Mfg. No.

OrderNo.

Mag.Cap.

Max. WireSize In.

StapleLgth. In.

T-59 AROT59 30 5/16 5/16

Wire TackersT-25™

Grooved guide. Jam resistant loading mechanism. For low voltage wire up to 1/4" diameter. UL listed.

Mfg. No.

OrderNo.

Mag.Cap.

Max. Wire

Size In.Staple

Lgth.In.

T-25 AROT25 85 1/49/32, 3/8, 716 and

9/16

Wire TackersT-37™

All steel construction with grooved driving blade and jam resistant mechanism. Short span easy compression handle. Chrome finish resists wear and tear. Grooved guide ensures perfect stapling. For low voltage wire up to 5/16" diameter UL listed.

Mfg. No.

OrderNo.

Mag.Cap.

Max. Wire

Size In.Staple

Lgth.In.

T-37 AROT37 85 3/8 3/8, 1/2 and 9/16

Wire TackersT25X™

Compact, ergonomic design. Simple loading and release mechanism. Grooved guide. Lightweight, quality plastic housing with durable steel compo-nents. Uses T25 staples.

Mfg. No.

Order No.

Mag.Cap.

Max Wire Size In.

Staple Lgth. In.

T25X AROT25X 85 9/16 3/8, 7/16, & 9/16



FASTENERSStaple/Brad Nail Guns

Heavy Duty

Die-cast aluminum construction with ergonomic grip. Quick bottom load and Hi/Low power setting.

Mfg.No.

OrderNo.

Brad Nails Type

T50 Staples Dim. In.

T50RED AROT50RED 18ga. up to 1"

1/4 – 9/16

Staple/Brad Nail GunsPro Corded Electric

Fires all sizes of T50 staples and up to 5/8" brad nails. An indicator light that alerts user when its time to reload staples/nails, has easy access mag-azine release for quick reloading.

Mfg. No.

Order No.

Staple Size

Brad Nail Size In.

T50AC AROT50AC Any T50 Up to 5/8

StaplesJT-21™

7/16" flat crown, light duty staples for use with Ar-row® JT-21CM™, Powershot®, Easy-shot®, Easy-fire®, Craftsman®, Ace®, Mastercraft® and Stan-ley® staplers.


JT-21-1/4 ARO214 1/4 1000

JT-21-5/16 ARO215 5/16 1000

JT-21-3/8 ARO276 3/8 1000

StaplesT50®

Heavy duty staples. Ideal for use with Arrow®'s T50SA, T50SHA, ET50, ETN50, ETF50, & ETC50 staple guns and tackers. Also fits Ace®, Craftsman®, Master Mechanic®, Powershot®, and Stanley®.Mfg. No. Order No. Lgth. In. Pkg. Qty.

504 ARO504 1/4 1250505 ARO505 5/16 1250506 ARO506 3/8 1250

506SS* ARO506SS 3/8 1250508 ARO508 1/2 1250509 ARO509 9/16 1250

505IP ARO505IP 5/16 5000506IP ARO506IP 3/8 5000

*Stainless steel staples.

StaplesT2025™

5/16" flat crown staples for use with T2025 and ET2025 staple guns.

Mfg. No. Order No. Lgth. In. Pkg. Qty.205 ARO205 5/16 1000206 ARO206 3/8 1000208 ARO208 1/2 1000

StaplesT59™ — Insulated

Black, insulated 11/16" leg length. For wire up to 1/4" diameter. For use with Arrow T59 wire and cable tackers. UL listed.

Mfg. No. Order No. Lgth. In. Pkg. Qty.591188BL ARO59111 5/16 300

StaplesT25™

5/16" round crown staples for use with T25, T2025, CT2025, ET2025 wire and cable tackers.

Mfg. No. Order No. Lgth. In. Pkg. Qty.256 ARO256 3/8 1000257 ARO257 7/16 1000259 ARO259 9/16 1000

StaplesT37™

3/8" round crown staples for use with Arrow® T37 Tacker, Powershot®, Craftsman®, Black & Decker®, Stanley® and Ace®.


378 ARO378 1/2 1000

StaplesP35™

7/16" flat crown, heavy duty staples for use with Arrow® P35 plier-type stapler.Mfg. No. Order No. Lgth. In. Pkg. Qty.

354 ARO354 1/4 5000356 ARO356 3/8 5000




www.aih.com

FASTENERS

StaplesHeavy Duty

Heavy duty staples for use in Stanley-Bostitch® staplers.

Mfg. No. Order No. Lgth. In. Pkg. Qty.586 ARO586 3/8 1000

Staples1/2" Crown — Duo-Fast®

20 ga., .050" wire construction with chisel point and galvanized finish.

Mfg. No. Order No. Lgth. In. Pkg. Qty.5008C 1/4"/3947 DUO03947 1/4 50005010C 5/16" 4291 DUO04291 5/16 5000

5012C 3/8"/4739 DUO04739 3/8 5000

5016C 1/2"/5223 DUO05223 1/2 5000

Hammer TackersClassic — Duo-Fast®

Features rear-loading magazine with two-strip ca-pacity, and fast jam clearance. Accepts 20 ga., 1/2" crown staples 5/32" to 5/16" long (includes 1 box). Excellent for stapling carpet pads.

Mfg. No. Order No. Dim. In. H x W x LHT-550/1013292 DUO77047 3-1/4 x 1-3/8 x 11-3/8

Hammer Tackers

Jam resistant loading mechanism, precision-locked rear loading. Steel construction with rub-berized grip. Accepts .050 guage staples 5/16, 3/8 and 1/2" lengths.

Mfg. No. Order No.

Mag. Cap.

HT-50 AROHT50 170

Hammer TackersProfessional T50

Steel construction, jam resistant mechanism. Re-cessed hand grip protects hand from scraping. Surface guard flange reduces damage to surface. Holds two full strips of Arrow staples.

Mfg. No. Order No. Staple Size In.HTX50 AROHTX50 5/16, 3/8, 1/2

StaplesHammer Tacker

Galvanized staples for hammer tackers. Use with Arrow® HT50A® stapler.

Mfg. No. Order No. Size In. Pkg. Qty.FANA1138G FAN10000 3/8 5000

Manual Collated Ring Pliers

Automatic feed, one hand operation. Uses 11/16" 16 guage C-rings.


P7 BSTP7Max. cap. 50

rings

StaplesC-Ring

Use with bostich BSTP7 manual collated ring pliers.

Mfg. No. Order No. Lgth In. Pkg. Qty.RING616G50B BST4085 11/16 2500

Hog Ringer Pliers

For closing hog rings and ring fasteners. Mal-leable cast iron construction. Zinc-plated.

Mfg. No. Order No. Use With

RR-HM SEYRRHMHill H1, H2, H3, PBH1,

PBH2, PBH3, B1, B2 and B3 rings

Pig & Hog Rings

Copper-coated 12.5 ga. steel wire. Designed to prevent swine from root-ing in ground. Hill pat-tern; closes in triangular shape. Slant point. 100 per box.

Mfg. No. Order No. Desc.RN-H1 SEYRNH1 Hog RingsRN-H3 SEYRNH3 Hog RingsRN-HY SEYRNHY Hog Rings


• We can take your ideas and turn them into a finished design• Low minimums!

For more information, contact your Sales Representative today!

LET US PUT YOUR LOGO ON SAFETY VESTS,JACKETS, SHIRTS, HARDHATS & GLOVES!

WE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOSWE DO LOGOS


Date post:	17-Mar-2020
Category:	Documents
Upload:	others
View:	11 times
Download:	0 times

NAILS & STAPLES BOLTS, SCREWS & NUTS WASHERS, CLIPS & … · bolts, screws & nuts washers, clips &...

Documents