Nanoscience and Nanotechnology
Textbooks
New and Widely Adopted
Request your complimentaryinspection copy today!
WWW.CRCTEXTBOOKS.COM
Teach with the books you trust.™
Table of ContentsNanoscience & Technology ......................................3
Nanomaterials ..........................................................4
MEMS & NEMS ........................................................6
Bionanotechnology ..................................................7
General ....................................................................8
For more information and complete tables of contents
or to request yourcomplimentary inspection copy
visit
www.crctextbooks.com1-800-634-7064 • 1-859-727-5000
+44 (0) 1235 400 [email protected]
Page 3
Page 5
Page 7
Page 3
Page 5
Page 8
JTP12_gtr
Nanoscience & Technology
3For more information and complete contents, visit www.crctextbooks.com
Textbook
Introduction to NanoscienceGabor L. Hornyak, Joydeep Dutta, Harry F. Tibbals, and Anil K. Rao
Tomorrow’s nanoscientist will have a truly interdisciplinary and nano-centric education. For this to happen, the field needs a truly focused and dedicated textbook. This full-color masterwork is such a textbook. It introduces the nanoscale along with the societal impacts of nanoscience, then presents an overview of characterization and fabrication methods. The authors systematically discuss the chemistry, physics, and biology aspects of nanoscience, providing a complete picture of the challenges, opportunities, and inspirations posed by each facet before giving a brief glimpse at nanoscience in action: nanotechnology.
Solutions manual available upon qualifying course adoption
http://www.crcpress.com/product/isbn/9781420048056
Print ISBN: 978-1-4200-4805-6 eBook ISBN: 978-1-4398-8928-2 May 2008, 7 x 10, 856 pp. Suggested Price: $109.95 / £69.99
Textbook
Modeling and Analysis of Dynamic SystemsSecond EditionRamin S. Esfandiari and Bei LuCalifornia State University, Long Beach, USA
The goal of this second edition is essentially the same as that of the first edition, to provide students with a thorough knowledge of mathematical modeling and analysis of dynamic systems. Matlab, Simulink, and Simscape are introduced at the outset and are utilized throughout the book to perform symbolic, graphical, numerical, and simulation tasks. The textbook, written at a junior level, meticulously covers techniques for modeling dynamic systems, methods of response analysis, and an introduction to vibration and control systems.
Solutions manual and figure slides available upon qualifying course adoption
http://www.crcpress.com/product/isbn/9781466574939
Print ISBN: 978-1-4665-7493-9 eBook ISBN: 978-1-4665-7497-7 April 2014, 7 x 10, 566 pp. Suggested Price: $139.95 / £89.00
Textbook
A Laboratory Course in Nanoscience and NanotechnologyDr. Gerrard Eddy Jai PoinernMurdoch University, Perth, Western Australia
Although there are many theoretical nanotechnology and nanoscience textbooks available to students, there are relatively few practical laboratory-based books. Filling this need, this practical manual presents a hands-on approach to key synthesis techniques and processes currently used in nanotechnology and nanoscience. It shows undergraduate students how to synthesize their own nanometer-scale materials and structures and then analyze their results using advanced characterization techniques. Through a series of well-designed, classroom-tested lab experiments, students gain hands-on skills to complement their theoretical studies.
Instructor’s manual and figure slides available upon qualifying course adoption
http://www.crcpress.com/product/isbn/9781482231038
Print ISBN: 978-1-4822-3103-8 eBook ISBN: 978-1-4822-3104-5 December 2014, 6-1/8 x 9-1/4, 260 pp. Suggested Price: $69.95 / £44.99
Textbook
NanotechnologyUnderstanding Small Systems, Third EditionBen Rogers and Jesse AdamsNevadaNano, Sparks, USA
Sumita PennathurUniversity of California, Santa Barbara, USASeries: Mechanical and Aerospace Engineering
Second Edition of a CHOICE Award Winner
This is a substantial revision of one of the first true primary texts in nanotechnology. The second edition was a CHOICE Award winner in 2011. Each chapter in the third edition has been thoroughly revised and updated. It adds a major new chapter on nanomedicine. It maintains the pedagogy along with the glossary. Vetted by a number of current and previous adopters, this text incorporates their comments in this new edition.
Solutions manual and figure slides available upon qualifying course adoption
http://www.crcpress.com/product/isbn/9781482211726
Print ISBN: 978-1-4822-1172-6 eBook ISBN: 978-1-4822-1174-0 October 2014, 7 x 10, 427 pp. Suggested Price: $99.95 / £72.99
Textbook
Semiconductor Laser TheoryPrasanta Kumar Basu, Bratati Mukhopadhyay, and Rikmantra BasuUniversity of Calcutta, West Bengal, India
This text takes a semiclassical approach to teaching the principles, structure, and applications of semiconductor lasers. The first half presents basic concepts, such as semiconductor physics, p-n junction theory, alloys, heterostructures, quantum nanostructures, k.p theory, waveguides, resonators, filters, and optical processes. The remainder of the book describes various lasers, including double heterostructure, quantum wire, quantum dot, quantum cascade, vertical-cavity surface-emitting, single-mode and tunable, nitride, group IV, and transistor lasers.
Solutions manual and figure slides available upon qualifying course adoption
http://www.crcpress.com/product/isbn/9781466561915
Print ISBN: 978-1-4665-6191-5 June 2015, 6-1/8 x 9-1/4, 551 pp. Suggested Price: $99.95 / £63.99
Textbook
Sensors and ActuatorsEngineering System Instrumentation, Second EditionClarence W. de SilvaUniversity of British Columbia, Vancouver, Canada
This introductory textbook on engineering system instrumentation emphasizes sensors, transducers, actuators, and devices for component interconnection. The book deals with “instrumenting” an engineering system through the incorporation of suitable sensors, actuators, and associated interface hardware including filters, amplifiers, and other signal modifiers. In view of the practical considerations, design issues, and industrial techniques that are presented throughout the book, and in view of the simplified and snap-shot style presentation of more advanced theory and concepts, it serves also as a useful reference for engineers, technicians, project managers, and other practicing professionals in industry and in research laboratories.
Solutions manual and figure slides available upon qualifying course adoption
http://www.crcpress.com/product/isbn/9781466506817
Print ISBN: 978-1-4665-0681-7 August 2015, 7 x 10, 847 pp. Suggested Price: $129.95 / £82.00
4
Nanoscience & Technology / Nanomaterials
1-800-634-7064 • 1-859-727-5000 • +44 (0) 1235 400 524 • [email protected]
Textbook
Finite Element Analysis of Composite Materials using Abaqus™Ever J. BarberoWest Virginia University, Morgantown, USASeries: Composite Materials
Developed from the author’s graduate-level course on advanced mechanics of composite materials, this text shows how powerful finite element tools address practical problems in the structural analysis of composites. Unlike other texts, this one takes the theory to a hands-on level by actually solving problems. It explains the concepts involved in the detailed analysis of composites, the mechanics needed to translate those concepts into a mathematical representation of the physical reality, and the solution of the resulting boundary value problems using the commercial finite element analysis software Abaqus™.
Solutions manual and figure slides available upon qualifying course adoption
http://www.crcpress.com/product/isbn/9781466516618
Print ISBN: 978-1-4665-1661-8 eBook ISBN: 978-1-4665-1671-7 April 2013, 6-3/4 x 9-3/4, 444 pp. Suggested Price: $125.95 / £79.99
Textbook
Colloid and Surface ChemistryA Laboratory Guide for Exploration of the Nano WorldSeyda BucakYeditepe University, Istanbul, Turkey
Deniz RendeRensselaer Polytechnic Institute, Troy, New York, USA
Colloid and interface science has become a truly interdisciplinary subject, integrating chemistry, physics, and biology. This lab book is designed to help students understand the basic principles of colloid and interface science through experiments underlining the fundamental principles. It includes techniques for the preparation of nanoparticles as well as everyday applications of colloid science. It is aimed at undergraduate students or graduate students without prior background in the field. Principles and laboratory techniques are learned via experiments as fundamental research tools and applications are seamlessly integrated with theory.
Figure slides are available upon qualifying course adoption
http://www.crcpress.com/product/isbn/9781466553101
Print ISBN: 978-1-4665-5310-1 eBook ISBN: 978-1-4665-5312-5 December 2013, 6-1/8 x 9-1/4, 278 pp. Suggested Price: $41.95 / £26.99
Textbook
NanotechnologyEthical and Social ImplicationsEdited by
Ahmed S. KhanDeVry University, Addison, Illinois, USASeries: Nano and Energy
This book spans the full range of nanotech topics. It focuses on how advances in science and the convergence of multiple technological disciplines in nanotechnology impact society at individual, community, national, and international levels. Exploring this technology’s positive and negative aspects in the face of today’s complex social issues, the author addresses how it can benefit society and the demands of new skill sets in the workforce. Written using an interactive format, the book employs case studies, scenarios, and online exercises to promote critical thinking and problem solving skills.
Instructor’s manual and figure slides available upon qualifying course adoption
http://www.crcpress.com/product/isbn/9781439859537
Print ISBN: 978-1-4398-5953-7 eBook ISBN: 978-1-4398-5958-2 May 2012, 6-1/4 x 9-1/4, 365 pp. Suggested Price: $87.95 / £55.99
Textbook
BionanophotonicsAn Introductory TextbookShuichi KinoshitaOsaka University, Japan
Structural colors in living beings originate from surprisingly sophisticated microstructures which gave rise to a new field of research—bionanophotonics. This book places a special emphasis on the detailed physical basis for the optical processes that are deeply connected with the structural colors, and also on the biological and physiological bases concerning what a variety of animals are living and how they are seen by human vision. In addition, it contains ample examples for the recent technological advances in photonics that are rooted in the nature.
Solutions manual available upon qualified course adoption
http://www.crcpress.com/product/isbn/9789814364713
Print ISBN: 978-981-4364-71-3 eBook ISBN: 978-981-4364-72-0 July 2013, 6 x 9, 400 pp. Suggested Price: $149.95 / £95.00
NanophotonicsDevices, Circuits, and SystemsPreecha Yupapin, K. Srinuanjun, and S. Kamoldilok
This book investigates the behavior of light (light pulse) within the micro- and nano-scale device (ring resonator), which can be integrated to form the device, circuits, and systems that can be used for atom/molecule trapping and transportation, optical transistor, fast calculation devices (optical gate), nanoscale communication and networks, and energy storage, etc. The large demand of small-scale device, especially, with light signal processing is needed. This book discusses device (nano device) design and simulation, which can be useful for practice in the near future.
http://www.crcpress.com/product/isbn/9789814364362
Print ISBN: 978-981-4364-36-2 eBook ISBN: 978-1-4822-1574-8 May 2013, 6 x 9, 178 pp. Suggested Price: $69.95 / £44.99
Textbook
Fundamentals of NanotechnologyGabor L. Hornyak, John J. Moore, Harry F. Tibbals, and Joydeep Dutta
Winner of a CHOICE Outstanding Academic Title Award
This textbook is for the next generation of nanotechnologists. It surveys the field’s broad landscape, exploring the physical basics such as nanorheology, nanofluidics, and nanomechanics as well as industrial concerns such as manufacturing, reliability, and safety. The authors then explore the vast range of nanomaterials and systematically outline devices and applications in various industrial sectors. This color text is an ideal companion to Introduction to Nanoscience by the same group of esteemed authors.
Solutions manual available upon qualifying course adoption
http://www.crcpress.com/product/isbn/9781420048032
Print ISBN: 978-1-4200-4803-2 eBook ISBN: 978-1-4200-4804-9 December 2008, 7 x 10, 786 pp. Suggested Price: $109.95 / £69.99
Nanomaterials
5For more information and complete contents, visit www.crctextbooks.com
Textbook
XAFS for EveryoneScott CalvinSarah Lawrence College, Bronxville, New York, USA
This text provides a practical, thorough guide to x-ray absorption fine-structure (XAFS) spectroscopy for both novices and seasoned practitioners from a range of disciplines. Cartoon characters and easy-to-follow illustrations introduce multiple viewpoints without distracting from the main narrative. Whether students are encountering this technique for the first time or looking to hone their craft, this innovative and engaging book gives them insight on implementing XAFS spectroscopy and interpreting XAFS experiments and results. It helps students understand real-world trade-offs and the reasons behind common rules of thumb.
Figure slides are available upon qualifying course adoption
http://www.crcpress.com/product/isbn/9781439878637
Print ISBN: 978-1-4398-7863-7 eBook ISBN: 978-1-4665-8466-2 May 2013, 8-1/2 x 11, 457 pp., Soft Cover Suggested Price: $104.95 / £66.99
Textbook
Carraher’s Polymer ChemistryNinth EditionCharles E. Carraher Jr.Florida Atlantic University, Boca Raton, USA
Continuing the tradition of previous volumes, the ninth edition provides a well-rounded presentation of the principles and applications of polymers. With an emphasis on the environment and green chemistry and materials, it offers detailed coverage of natural and synthetic giant molecules, inorganic and organic polymers, biomacromolecules, elastomers, adhesives, coatings, fibers, plastics, blends, caulks, composites, and ceramics. This new edition includes updated and expanded chapters as well as several new sections. It provides all the elements of an introductory text, covering synthesis, properties, applications, and characterization.
Figure slides and test bank available upon qualifying course adoption
http://www.crcpress.com/product/isbn/9781466552036
Print ISBN: 978-1-4665-5203-6 eBook ISBN: 978-1-4665-5223-4 September 2013, 7 x 10, 818 pp. Suggested Price: $125.95 / £79.99
Textbook
Introduction to Composite Materials DesignSecond EditionEver J. BarberoWest Virginia University, Morgantown, USASeries: Composite Materials
Completely revised and updated, this second edition of a bestseller contains new chapters on damage mechanics, fabric reinforced composites, and external strengthening for infrastructure. It covers design aspects such as fiber and matrix selection, fabrication processes, prediction of material properties, and structural analysis and design of beams, plates, and shells, including many fully developed examples. Powerful preliminary design tools, such as “carpet plots,” are used in examples throughout the book.
Instructional materials, special software, and solutions manual available upon qualifying course adoption
http://www.crcpress.com/product/isbn/9781420079159
Print ISBN: 978-1-4200-7915-9 eBook ISBN: 978-1-4200-7916-6 July 2010, 6-3/4 x 9-3/4, 562 pp. Suggested Price: $121.95 / £77.99
Textbook
Principles of Composite Material MechanicsThird EditionRonald F. GibsonUniversity of Nevada, Reno, USASeries: Mechanical Engineering
While continuing to cover classical methods, the third edition of this popular bestseller also includes frequent references to current state-of-the-art composites technology and research findings. Along with many new worked-out example problems, homework problems, and figures, this edition offers expanded coverage of finite element modeling and test methods and a new appendix on matrix concepts and operations. It also discusses particle composites, nanocomposites, nanoenhancement of conventional fiber composites, and hybrid multiscale composites. A solutions manual and PowerPoint presentations are available for qualifying instructors.
Solutions manual and figure slides available upon qualifying course adoption
http://www.crcpress.com/product/isbn/9781439850053
Print ISBN: 978-1-4398-5005-3 eBook ISBN: 978-1-4398-9676-1 September 2011, 6-1/8 x 9-1/4, 683 pp. Suggested Price: $125.95 / £79.99
Textbook
Introduction to PolymersThird EditionRobert J. Young and Peter A. LovellUniversity of Manchester, UK
Thoroughly updated, this third edition of a bestselling text provides extensive, detailed, and balanced coverage of polymer chemistry and polymer physics, spanning synthesis, characterization, bulk properties and morphology, and mechanical and electrical properties of polymers. The material has been completely reorganized and expanded to offer a coherent format for teaching and learning the fundamental aspects of contemporary polymer science. This edition incorporates important developments that have occurred in the past two decades, including “living” radical polymerization, supramolecular polymerization, and block and graft copolymer synthesis methods.
Solutions manual and figure slides available upon qualifying course adoption
http://www.crcpress.com/product/isbn/9780849339295
Print ISBN: 978-0-8493-3929-5 eBook ISBN: 978-1-4398-9195-7 June 2011, 7 x 10, 688 pp., Soft Cover Suggested Price: $62.95 / £38.99
Textbook
Introduction to Polymer Science and ChemistryA Problem-Solving Approach, Second EditionManas ChandaIndian Institute of Science, Bangalore
Industry and academia remain fascinated with the diverse properties and applications of polymers. However, most introductory books on this enormous and important field do not stress practical problem solving or include recent advances. Updating the popular first edition of “the polymer book for the new millennium,” this volume seamlessly integrates exploration of the fundamentals of polymer science and polymer chemistry. It is peppered with helpful questions and answers throughout to enhance understanding of presented theories and concepts.
Solutions manual and figure slides available upon qualifying course adoption
http://www.crcpress.com/product/isbn/9781466553842
Print ISBN: 978-1-4665-5384-2 eBook ISBN: 978-1-4665-5386-6 January 2013, 7 x 10, 770 pp. Suggested Price: $132.95 / £85.00
6
Nanomaterials / MEMS & NEMS
1-800-634-7064 • 1-859-727-5000 • +44 (0) 1235 400 524 • [email protected]
Textbook
Fundamentals of Microfabrication and NanotechnologyThird Edition, Three-Volume SetMarc J. MadouUniversity of California, Irvine, USA
The first volume in this set offers a rigorous theoretical treatment of micro- and nanosciences and includes sections on solid-state physics, quantum mechanics, crystallography, and fluidics. The second volume presents a very large set of manufacturing techniques for micro- and nanofabrication and covers different forms of lithography, material removal processes, and additive technologies. The third volume focuses on manufacturing techniques and applications of Bio-MEMS and Bio-NEMS. Each volume in the set is illustrated in color and contains worked-out examples and end-of-chapter problems.
Solutions manual, instructor’s manual, and figure slides available upon qualifying course adoption
http://www.crcpress.com/product/isbn/9780849331800
Print ISBN: 978-0-8493-3180-0 August 2011, 8-1/2 x 11, 1992 pp. Suggested Price: $287.00 / £183.00
Textbook
Fundamentals of Soft Matter ScienceLinda S. HirstUniversity of California, Merced, USA
Focusing on qualitative science and experimental techniques, this book provides a comprehensive, practical introduction to the field of soft matter, which merges tools from physics, materials science, chemistry, biology, and computer science. The text first presents an overview of the field and a summary of physical principles of self-assembly in soft materials. It then covers liquid crystals, surfactants, colloids, polymers, gels, and soft biomaterials, including what defines each class of materials, key properties, and commonly used characterization methods. The author emphasizes imaging techniques and other methods used to characterize soft materials in the lab.
http://www.crcpress.com/product/isbn/9781439827758
Print ISBN: 978-1-4398-2775-8 eBook ISBN: 978-1-4398-2776-5 November 2012, 7 x 10, 246 pp., Soft Cover Suggested Price: $87.95 / £55.99
Textbook
Optical Properties of NanostructuresYing Fu and Min QiuRoyal Institute of Technology, Sweden
This book discusses electrons and photons in and through nanostructures by the first-principles quantum mechanical theories and fundamental concepts (a unified coverage of nanostructured electronic and optical components) behind nanoelectronics and optoelectronics, the material basis, physical phenomena, device physics, as well as designs and applications. The combination of viewpoints presented in the book can help foster further research and cross-disciplinary interaction needed to surmount the barriers facing future generations of technology design.
http://www.crcpress.com/product/isbn/9789814303262
Print ISBN: 978-981-4303-26-2 eBook ISBN: 978-1-4398-9206-0 August 2011, 6 x 9, 312 pp. Suggested Price: $149.95 / £95.00
Textbook
Nanoscale Physics for Materials ScienceTakaaki Tsurumi, Hiroyuki Hirayama, Martin Vacha, and Tomoyasu Taniyama
Exploring the electrical, optical, and magnetic properties of materials at the nanoscale level, this text covers fundamental cross-disciplinary concepts in materials science and engineering. It presents a comprehensive description of the physical phenomena and changes that can be expected when macroscopically sized materials are reduced to the nanometer level. The authors link physical phenomena with recent scientific and technological developments and present an overview of quantum mechanics and the band structure of solids. Problem sets are included at the end of each chapter.
Solutions manual available upon qualifying course adoption
http://www.crcpress.com/product/isbn/9781439800591
Print ISBN: 978-1-4398-0059-1 eBook ISBN: 978-1-4398-0060-7 December 2009, 6-1/4 x 9-1/4, 288 pp. Suggested Price: $109.95 / £69.99
Textbook
Understanding NanomaterialsMalkiat S. JohalPomona College, Claremont, California, USA
This textbook provides a coherent overview of the fundamental principles underlying nanomaterials fabrication, as well as a discussion of the characterization and application of these materials. The author takes an interdisciplinary approach, highlighting the theory and tools contributed by chemistry, biology, physics, medicine, and engineering. The book includes real world examples related to energy, the environment, and medicine throughout the text, underscoring presented technological applications.
Figure slides available upon qualifying course adoption
http://www.crcpress.com/product/isbn/9781420073102
Print ISBN: 978-1-4200-7310-2 eBook ISBN: 978-1-4200-7311-9 April 2011, 6-1/4 x 9-1/4, 328 pp., Pack - Book and Ebook Suggested Price: $68.95 / £43.99
Textbook
Physical Properties of MaterialsSecond EditionMary Anne WhiteDalhousie University, Halifax, Nova Scotia, Canada
Designed for advanced undergraduate students, this bestselling text establishes the principles that control the optical, thermal, electronic, magnetic, and mechanical properties of materials. This fully revised and updated second edition now covers materials sustainability, crystalline structures, graphene, carbon nanotubes, nanocomposites, quantum dots, magnetocaloric effect, spintronics, and polymer classifications. It also includes a new capstone tutorial on the materials science of cymbals, more than 60 new end-of-chapter problems, and updated references.
Solutions manual and figure slides available upon qualifying course adoption
http://www.crcpress.com/product/isbn/9781439866511
Print ISBN: 978-1-4398-6651-1 eBook ISBN: 978-1-4398-9197-1 June 2011, 6-1/4 x 9-1/4, 469 pp. Suggested Price: $92.95 / £58.99
MEMS & NEMS / Bionanotechnology
7For more information and complete contents, visit www.crctextbooks.com
Textbook
Molecular Motors in BionanotechnologyKeith Firman and James YouellUniversity of Portsmouth, UK
Many techniques have evolved to study and characterize molecular motors at the single-molecule level, such as the use of molecular tweezer devices for single-molecule studies. This book describes a wide range of molecular motors, from chemical to biological. It introduces readers to the concepts and benefits of each technique and looks at structural information and how this helps understand function. The book also examines how some of these motors are being used or may be used in the future as part of a synthetic biology approach to building devices and sensors.
Figure slides available upon qualifying course adoption
http://www.crcpress.com/product/isbn/9789814267021
Print ISBN: 978-981-4267-02-1 eBook ISBN: 978-1-4665-1719-6 March 2013, 6 x 9, 212 pp. Suggested Price: $149.95 / £95.00
Textbook
From MEMS to Bio-MEMS and Bio-NEMSManufacturing Techniques and ApplicationsMarc J. MadouUniversity of California, Irvine, USA
This book details manufacturing techniques applicable to bio-nanotechnology. After reviewing MEMS techniques, materials, and modeling, the author covers nanofabrication, genetically engineered proteins, artificial cells, nanochemistry, and self-assembly. He also discusses scaling laws in MEMS and NEMS, actuators, fluidics, and power and brains in miniature devices. He concludes with coverage of various MEMS and NEMS applications. This color text offers end-of-chapter problems, worked examples, and extensive references.
Solutions manual, instructor’s manual, and figure slides available upon qualifying course adoption
http://www.crcpress.com/product/isbn/9781420055160
Print ISBN: 978-1-4200-5516-0 eBook ISBN: 978-1-4398-9182-7 June 2011, 8-1/2 x 11, 650 pp. Suggested Price: $115.95 / £73.99
Textbook
Manufacturing Techniques for Microfabrication and NanotechnologyMarc J. MadouUniversity of California, Irvine, USA
Designed for science and engineering students, this text focuses on emerging trends in processes for fabricating MEMS and NEMS devices. The book reviews different forms of lithography, subtractive material removal processes, and additive technologies. Both top-down and bottom-up fabrication processes are exhaustively covered and the merits of the different approaches are compared. Students can use this color volume as a guide to help establish the appropriate fabrication technique for any type of micro- or nano-machine.
Solutions manual, instructor’s manual, and figure slides available upon qualifying course adoption
http://www.crcpress.com/product/isbn/9781420055191
Print ISBN: 978-1-4200-5519-1 eBook ISBN: 978-1-4398-9180-3 June 2011, 8-1/2 x 11, 670 pp. Suggested Price: $115.95 / £73.99
Textbook
Solid-State Physics, Fluidics, and Analytical Techniques in Micro- and NanotechnologyMarc J. MadouUniversity of California, Irvine, USA
Providing a clear theoretical understanding of MEMS and NEMS, Solid-State Physics, Fluidics, and Analytical Techniques in Micro- and Nanotechnology covers all aspects of solid state physics behind nanotechnology and science. After exploring the rise of Si, MEMS, and NEMS in a historical context, the text discusses crystallography, quantum mechanics, the band theory of solids, and the silicon single crystal. It concludes with coverage of photonics, the quantum hall effect, and superconductivity. Illustrated in color, the text offers end-of-chapter problems, worked examples, and extensive references.
Solutions manual, instructor’s manual, and figure slides available upon qualifying course adoption
http://www.crcpress.com/product/isbn/9781420055115
Print ISBN: 978-1-4200-5511-5 eBook ISBN: 978-1-4398-9181-0 June 2011, 8-1/2 x 11, 656 pp. Suggested Price: $115.95 / £73.99
Textbook
Biomedical MicrosystemsEllis MengUniversity of Southern California, Los Angeles, USA
Written by an active researcher named one of Technology Review’s Young Innovators Under 35, this book begins with an introduction to the benefits of miniaturization. It introduces materials, fabrication technology, and the necessary components of all bioMEMS. The author covers fundamental principles and building blocks, including microfluidic concepts, lab-on-a-chip systems, and sensing and detection methods. The final chapters explore several important applications of bioMEMS, such as microdialysis, catheter-based sensors, MEMS implants, neural probes, and tissue engineering. Detailed examples, exercises, and illustrations help clarify the concepts.
Solutions manual available upon qualifying course adoption
http://www.crcpress.com/product/isbn/9781420051223
Print ISBN: 978-1-4200-5122-3 eBook ISBN: 978-1-4200-5123-0 September 2010, 6-1/4 x 9-1/4, 408 pp. Suggested Price: $109.95 / £69.99
Textbook
Introduction to BioMEMSAlbert FolchUniversity of Washington, Seattle, USA
In color throughout, this classroom-tested text covers the whole breadth of this dynamic field, including classical microfabrication, microfluidics, tissue engineering, cell-based and noncell-based devices, and implantable systems. It gives readers a real sense of how the field has grown by providing historical perspectives and covering the state of the art. The text contains problem sets, design challenges, key references, and over 400 color figures, most of which are from the original researchers.
Instructor’s manual and PowerPoint slides available upon qualifying course adoption
http://www.crcpress.com/product/isbn/9781439818398
Print ISBN: 978-1-4398-1839-8 eBook ISBN: 978-1-4398-1840-4 August 2012, 7 x 10, 528 pp. Suggested Price: $97.95 / £61.99
8
Bionanotechnology / General
1-800-634-7064 • 1-859-727-5000 • +44 (0) 1235 400 524 • [email protected]
Textbook
Technical WritingA Practical Guide for Engineers and ScientistsPhillip A. LaplanteThe Pennsylvania State University, Malvern, USASeries: What Every Engineer Should Know
Written by a renowned engineer and widely published technical author, this guide enables students to write, edit, and publish materials of a technical nature, including books, articles, reports, and electronic media. Complementing the traditional writer’s reference manuals and other books on technical writing, it helps readers understand the practical considerations in writing technical content. Drawing on his own work, the author presents many first-hand examples of writing, editing, and publishing technical materials. These examples illustrate how a publication originated as well as various challenges and solutions.
http://www.crcpress.com/product/isbn/9781439820858
Print ISBN: 978-1-4398-2085-8 eBook ISBN: 978-1-4398-9213-8 July 2011, 6-1/4 x 9-1/4, 250 pp., Soft Cover Suggested Price: $45.95 / £28.99
Textbook
Introduction to Nanoscience and NanotechnologyGabor L. Hornyak, H.F. Tibbals, Joydeep Dutta, and John J. Moore
The maturation of nanotechnology has revealed it to be a unique and distinct discipline rather than a specialization within a larger field. A nanoscience textbook cannot afford to be chemistry, physics, or engineering text focused on nano. It must be an integrated and multidisciplinary nano textbook. The archetype of the modern nano textbook, this text builds a solid background in characterization and fabrication methods while integrating the physics, chemistry, and biology facets. The remainder of this color text focuses on applications, examining engineering aspects as well as nanomaterials and industry-specific applications in such areas as energy, electronics, and biotechnology.
Solutions manual available upon qualifying course adoption
http://www.crcpress.com/product/isbn/9781420047790
Print ISBN: 978-1-4200-4779-0 eBook ISBN: 978-1-4200-4780-6 December 2008, 7 x 10, 1640 pp. Suggested Price: $172.95 / £110.00
Biophysics for BeginnersA Journey through the Cell NucleusHelmut SchiesselLeiden University, The Netherlands
This textbook gives compact introductions to the basics of the field (areas such as molecular cell biology and statistical physics) and then presents in-depth discussions of more advanced biophysics subjects, progressing to state-of-the-art experiments and their theoretical interpretations. The book is unique by offering a general introduction to biophysics, yet at the same time restricting itself to processes that occur inside the cell nucleus and that involve biopolymers (DNA, RNA, and proteins).
http://www.crcpress.com/product/isbn/9789814241656
Print ISBN: 978-981-4241-65-6 eBook ISBN: 978-1-4665-1718-9 December 2013, 6 x 9, 420 pp. Suggested Price: $149.95 / £95.00
Textbook
Colloids and Interfaces in Life Sciences and BionanotechnologySecond EditionWillem NordeWageningen University, The Netherlands, and University Medical Center Groningen, The Netherlands
This classroom-tested reference presents a concise introductory treatment of the physicochemical principles that determine interrelated colloidal and interfacial phenomena and their relevance to various life sciences. The book focuses on concepts that form the basis for understanding this behavior. It deciphers the spontaneous assembly of amphiphilic molecules and discusses the intentional fouling of surfaces for the immobilization of cells in bioreactors. It also devotes special attention to reversible and soft colloids and examines the colloidal domain in a historical perspective, the size and distribution of particles, electrokinetic phenomena, and more.
http://www.crcpress.com/product/isbn/9781439817186
Print ISBN: 978-1-4398-1718-6 eBook ISBN: 978-1-4398-9174-2 June 2011, 6-1/4 x 9-1/4, 495 pp. Suggested Price: $139.95 / £44.99
Textbook
Understanding NanomedicineAn Introductory TextbookRob BurgessMedical Nanotechnologies Incorporated, Richardson, Texas, USA
This book comprehensively covers a broad range of therapeutic and diagnostic applications of nanotechnology, providing descriptions of cutting-edge discoveries along with historical perspectives. The text focuses on nanomaterials and nanoparticles, the sectors that hold the most promise for the future of medicine. The author look at how nanotechnology can impact cancer treatment, clinical neuroscience, tissue engineering, drug delivery, and diagnostics. He also discusses the worldwide governmental regulatory impact on nanomedicine.
http://www.crcpress.com/product/isbn/9789814316385
Print ISBN: 978-981-4316-38-5 eBook ISBN: 978-1-4665-7050-4 June 2012, 6 x 9, 524 pp. Suggested Price: $149.95 / £95.00
Textbook
Learning Bio-Micro-NanotechnologyMel I. MendelsonLoyola Marymount University, Los Angeles, California, USA
A primary text for undergraduate nanotechnology courses, this book is designed for students who lack a cross-disciplinary background and knowledge of micro- and nano-technology. It contains examples, questions, and problems divided into three hierarchical learning skills: understanding, analyzing, and evaluating the concepts. The author breaks down the boundaries between biology, chemistry, physics, engineering, and ethics by co-mingling the vocabularies and concepts of these disciplines around bio-applications. Copiously illustrated, this text emphasizes biological and biomedical applications and includes a comprehensive chapter on ethics.
Solutions manual and figure slides available upon qualifying course adoption
http://www.crcpress.com/product/isbn/9781420082036
Print ISBN: 978-1-4200-8203-6 eBook ISBN: 978-1-4200-8204-3 January 2013, 7 x 10, 611 pp. Suggested Price: $94.95 / £59.99
General
9For more information and complete contents, visit www.crctextbooks.com
Textbook
Introduction to Numerical ProgrammingA Practical Guide for Scientists and Engineers Using Python and C/C++Titus Adrian BeuUniversity Babeş-Bolyai, Cluj-Napoca, RomaniaSeries in Computational Physics
This book introduces numerical programming using Python and C/C++, emphasizing methods used in physics and engineering. It helps readers develop the ability to navigate relevant algorithms, knowledge of coding design, and efficient scientific programming skills. It requires minimal background in mathematics, leading readers from elementary methods to complex algorithms useful in modern programming. It incorporates examples and real code throughout, as well as problem sets, to facilitate a hands-on learning experience.
Figure slides available upon qualifying course adoption
http://www.crcpress.com/product/isbn/9781466569676
Print ISBN: 978-1-4665-6967-6 eBook ISBN: 978-1-4665-6969-0 September 2014, 7 x 10, 674 pp., Soft Cover Suggested Price: $89.95 / £57.99
Textbook
Engineering Writing by DesignCreating Formal Documents of Lasting ValueEdward J. Rothwell and Michael J. CloudMichigan State University, East Lansing, USA
This book presents a novel approach to technical writing, positioning formal writing tasks as engineering design problems. It describes how to avoid logical fallacies and use physical reasoning to catch mistakes in claims, covers the essentials of technical grammar and style as well as the elements of mathematical exposition, and emphasizes the centrality of the target audience. Complete with illustrative examples, chapter summaries and exercises, and quick-reference tables, the text demonstrates how effective writing can be achieved through engineering-based thinking.
A solutions manual is available upon qualifying course adoption
http://www.crcpress.com/product/isbn/9781482234312
Print ISBN: 978-1-4822-3431-2 eBook ISBN: 978-1-4822-3432-9 May 2014, 6-1/8 x 9-1/4, 199 pp., Soft Cover Suggested Price: $49.95 / £31.99