Nanowire batteries=Lithium-Ion Battery

+ Nano-technology

Department of Electronics & Communication EngineeringBALAJI INSTITUTE OF ENGINEERING AND SCIENCES

Laknepally, Narsampet – 506331

By: -ADITYA KALYANAPU

(10AN1A0402)

Primary vs. Secondary Batteries

Primary batteries are disposable because their electrochemical reaction cannot be reversed.

Secondary batteries are rechargeable, because their electrochemical reaction can be reversed by applying a certain voltage to the battery in the opposite direction of the discharge.

Standard Modern Batteries

Zinc-CarbonZinc-Carbon: used in all inexpensive AA, C and D dry-cell batteries. The electrodes are zinc and carbon, with an acidic paste between them that serves as the electrolyte. (disposable)

AlkalineAlkaline: used in common Duracell and Energizer batteries, the electrodes are zinc and manganese-oxide, with an alkaline electrolyte. (disposable)

Lead-AcidLead-Acid: used in cars, the electrodes are lead and lead-oxide, with an acidic electrolyte. (rechargeable)

Battery types.

Nickel-cadmiumNickel-cadmium: (NiCd)rechargeable, “memory effect”

Nickel-metal hydrideNickel-metal hydride: (NiMH)rechargeable no “memory effect”

Lithium-IonLithium-Ion: (Li-Ion) rechargeable no “memory effect”

Recharge-ability & the “memory effect”

Recharge-ability: basically, when the direction of electron discharge (negative to positive) is reversed, restoring power.

the Memory EffectMemory Effect: (generally) When a battery is repeatedly recharged before it has discharged more than half of its power, it will “forget” its original power capacity.

Cadmium crystals are the culprit! (NiCd)

Lithium.

Periodic Table Symbol: Li

Atomic Weight: 3 (light!)

Like sodium and potassium, an alkali metal. (Group 1 – #s 1 through 7)

Highly reactive, with a high energy density.

Used to treat manic-depression because it is particularly effective at calming a person in a “manic” state.

The Periodic Table

Lithium (Ion) Battery Development

In the 1970’s, Lithium metal was used but its instability rendered it unsafe and impractical. Lithium-cobalt oxideLithium-cobalt oxide and graphitegraphite are now used as the lithium-Ion-moving electrodes.The Lithium-Ion battery has a slightly lower energy density than Lithium metal, but is much safer. Introduced by Sony in 1991.

Advantages of Using Li-Ion Batteries

POWERPOWER – High energy density means greater power in a smaller package.

160% greater than NiMH

220% greater than NiCd

HIGHER VOLTAGEHIGHER VOLTAGE – a strong current allows it to power complex mechanical devices.

LONG SHELF-LIFELONG SHELF-LIFE – only 5% discharge loss per month.10% for NiMH, 20% for NiCd

Disadvantages of Li-Ion

EXPENSIVEEXPENSIVE -- 40% more than NiCd.

DELICATEDELICATE -- battery temp must be monitored from within (which raises the price), and sealed particularly well.

REGULATIONSREGULATIONS -- when shipping Li-Ion batteries in bulk (which also raises the price).

Class 9 miscellaneous hazardous material

UN Manual of Tests and Criteria (III, 38.3)

The Intersection

“In terms of weight and size, batteries have become one of the limiting factors in the development of electronic devices.”

http://“The problem with...lithium batteries is that none of the existing electrode materials alone can deliver all the required performance characteristics including high capacity, higher operating voltage, and long cycle life. Consequently, researchers are trying to optimize available electrode materials by designing new composite structures on the nanoscale.”

“Nano”-Science and-Technology

The attempt to manufacture and control objects at the atomic and molecular level (i.e. 100 nanometers or smaller).

1 nanometer = 1 billionth of a meter (10-

9)

1 nanometer : 1 meter :: 1 marble : Earth

1 sheet of paper = 100,000 nanometers

Nano S & T (cont’d)Nano-scienceNano-science: research of the differing behavioral properties of elements on the nano scale.

Conductivity (electric/thermal), strength, magnetism, reflectivity.... Sometimes these properties differ on the nanoscale.

Carbon is particularly strong on the nano scale.

C60 = “Fullerene,” a.k.a “buckyball”

Nano S & T (cont’d)

Nano-technologyNano-technology: the use of nanoscale materials in critical dimensions of mechanical devices.

Nanotubes -- carbon molecules have greater mechanical strength at less weight per volume.Nanotransistors -- the computer industry’s best technology features microchips with transistors as small as 45nm.

Batteries with nanoscale materials deliver more power quickly with less heat.

Environmental Impacts and Use of Nanotechnology

Smaller scale technology means less resources used and less waste.

The EPA recently issued research grants to use nanotechnology to develop new methods of detecting toxins in water.

An example of the intersection...

From graphite to metallic tin (electrodes), but metallic tin isn’t great either…yet.

“...the biggest challenge for employing metallic tin...is that it suffers from huge volume variation during the lithium insertion/extraction cycle, which leads to pulverization of the electrode and very rapid capacity decay."

But nanotechnology could offer a solution...

Another example...

“The storage capacity of a Li-Ion battery is limited by how much lithium can be held in the battery's anode, which is typically made of carbon. Silicon has a much higher capacity than carbon, but also has a drawback.”

“Silicon placed in a battery swells as it absorbs positively charged lithium atoms during charging, then shrinks during use as the lithium ion is drawn out of the silicon. This cycle typically causes the silicon to pulverize, degrading the performance of the battery.”

The Nano-technology solution...

“The lithium is stored in a forest of tiny silicon nanowires, each with a diameter one one-thousandth the thickness of a sheet of paper. The nanowires inflate to four times their normal size as they soak up lithium but, unlike other silicon shapes, they do not fracture.”

See next slide…

• Photos taken by a scanning electron microscope of silicon nanowires before (left) and after (right) absorbing lithium. Both photos were taken at the same magnification. The work is described in “High-performance lithium battery anodes using silicon nanowires,” published online Dec. 16 in Nature Nanotechnology.

ADVANTAGES

• To save sufficient amount of time.

• Eco friendly.

• Protects from explosions.

• Saves money.

• Light in weight.

• High storage capacity(4200mAh).

DISADVANTAGES

• High temperature is required(600-900degree celsius.)

• It is expensive.

• Only anodes are manufactured by nanowires.

APPLICATIONS.

• Used in laptops.

• Used in film making industries.

• Used in automobiles.

• Used in medical equipments.

Finally, an interesting idea...

Background:battery research results in annual capacity gains of approximately 6%

Moore’s Law: The number of transistors on a computer microchip will double every two years. (40 years of proof!)

Idea: If battery technology had developed at the same rate, a heavy duty car battery would be the size of a penny.

THANK YOU………

Links to Referenceshttp://electronics.howstuffworks.com/battery.htmhttp://everything2.com/e2node/Lithium%2520ion%2520batteryhttp://www.batteryuniversity.comhttp://news-service.stanford.edu/news/2008/january9/nanowire-010908.htmlhttp://www.nano.gov/html/research/industry.htmlhttp://en.wikipedia.org/wiki/Buckminster_Fullerhttp://www.nanowerk.com/spotlight/spotid=5210.php