6
National Competition for Professionals on Structural Steel Design & Construction 2016-18 Institute for Steel Development & Growth
National Competitionfor
Professionals on Structural Steel Design & Construction 2016-18
Institute for Steel Development & Growth
Institute for Steel Development & Growth (INSDAG) have the pleasure in inviting entries for the National Structural Steel Design & Construction Award Competition for Professionals for best Steel / Composite Bridge, Buildings, Industrial Structures, best Large Covered Space Structures and best Special Structures as well as best steel based design for affordable housing. The objective is to appreciate the excellence in the field of steel design & construction in India, particularly demonstrating its potential in terms of efficiency, speed, lightness, aesthetics and cost.
National Competition for Professionals on Structural Steel Design & Construction 2016-18
Eligible Structures for the Awards
Eligibility & Submission of Entries
General Conditions of Submission:
The Awards are open to steel based structures situated in India that have been built by Indian steel work contractors. They must have been completed and be ready for occupation or use during the calendar years 2004 to 2018, else entries are not qualified.
Any member of the client design / execution team (firm / practising professional, single or in group) may submit entry using the attached form (forms may also be downloaded from INSDAG website www.steel-insdag.org. The declaration of compliance with the award requirements must be completed. Participants should ensure that Architect / Structural Engineer / Construction Agency / Client for the design / execution team have been informed. The Notice of Intent for participation should be sent
thto INSDAG latest by 30 November 2019. The entry should be sent to the address indicated below not later
stthan 31 December 2019.
The application form may be completed in block capital or typewritten and sent to “The Director General, INSDAG,Institute for Steel Development & Growth, Ispat Pragati Bhawan,793, Anandapur, Kolkata - 700 107 (Behind Fortis Hospital)” not later
stthan 31 December 2019. Please note that,
1. The project for which entry is submitted must have a minimum project cost of Rs. 3.0 crores.
2. One set of all documents shall be submitted in hard copy and in soft copy in CD.
3. A description of the outstanding features of the building / structure, the approach to its analysis & design, the use of steel and cost data should be included in the summary report highlighting all features as mentioned in A&B. The need for the use of Steel and its cost effectiveness should be included. (Report should be no longer than 1000 words)
4. A maximum of ten unmounted drawings in A3 size [eg. plans, sections, elevations & structural details & perspectives (optional)] illustrating the essential features of significance in relation to the use of steel, may be included.
5. A maximum of six different unmounted glossy original colour photographs (approximate size 8” x 10”) , may be included.
6. All drawings, photographs, design information and description matter submitted with the entry forms shall become the property of INSDAG who assumes the right to publish the material in any form they may wish. Prior to submission of the entry, the applicant must therefore obtain permission, if required, from the client / concerned firm.
7. A true copy of the completion certificate from concerned authority must be enclosed with the application form.
8. The structures covered in the entry must be made available for inspection by the judges if they so desire. Representatives of the entrant who were involved in the analysis, design and construction should be available along with the analysis and design report and the design drawings, during site visit, if requested.
9. Entries from any agency involved in a project but no longer in business for whatever reason will not be entertained in the Competition. Entries already submitted in the competition for the year 2005, 2006, 2007, 2008-2009, 2009-2010,2010-2011,2011-12, 2012-13, 2013-14 & 2015-16 but did not win any award are entitled for reconsideration, if resubmitted to INSDAG.
A panel of judges who are leading representatives of Architecture, Civil / Structural Engineering / Organisations will assess the entries. The panel will select award winners after assessing all entries against some or all of the following criteria, as relevant for the class of structure under evaluation:
The Panel of Judges
A) Planning and Architectures
o Architectural excellence, Innovations & Life Cycle Cost aspects
o Functional efficiency
o Efficiency in provision of services and installation systems
o Favourable environmental impact
B) Structural Engineering
o Integration of structure and services to meet architectural requirements & Innovative ideas in structural system used
o Benefits achieved by using steel / predominantly steel intensive construction
o Efficiency of design, innovative ideas in
fabrication and erection
o Workmanship.All entrants will be bound by the decision of the judges, whose discretion to make or withhold any award or awards is final. No discussion or correspondence regarding their decision will be entertained by the judges or by INSDAG. The decision of INSDAG in all matters relating to the Competition is final and binding.
The winning team responsible for the design and construction will receive Award as follows:
The Awards
1st prize: Rs 2.0 lakhs + Scroll of Honour + Certificate
2nd prize: Rs 1.25 lakhs + Scroll of Honour + Certificate
3rd prize: Rs 0.75 lakhs + Scroll of Honour + Certificate
Results
The results of the Competition will be announced in March 2020, but all winning entrants will be informed of the results before they are made public. It is essential, however, that any publicity that entrants might wish to arrange should be withheld until completion of the presentation ceremony.
All correspondence regarding the Competition should be addressed to:
The Director General
Institute for Steel Development and Growth (INSDAG)'Ispat Pragati Bhawan' , 793 Anandapur, Kolkata – 700107Phone: 9748482618, Email: [email protected]/[email protected]
Background:
Management of the Institute :
Role of the Institute:
Some of its roles are:
Main Activities:
Technical Advisory:
Publications:
Membership Categories
Steel is the backbone of all industries and the basic ingredient for growth and development of a country. Traditionally, the fortunes of the steel industry have been linked to the economic cycle of the country. Per capita consumption of steel speaks volumes about the relative position of the country on the development frontier. In India the per capita consumption of steel stands very low in compare to developed and developing countries. Moreover, steel is completely recyclable and thus environment -friendly. Hence, a large potential exists in furthering the usage of steel in various segments of industry. With this view in mind and to improve the image of steel to the users, Ministry of Steel along with the major steel Producers (SAIL, TISCO, RINL, JSW, ESSAR, ISPAT etc) have promoted and established the Institute for Steel Development & Growth (INSDAG) at Kolkata. The Institute is registered as a "Society" under Societies Registration Act of West Bengal, with its registered office at Ispat Bhavan, 40 Chowringhee Road, Kolkata 700 071. The Institute is a member-based nonprofit making organisation. As on, it has more than 1000 members comprising organizations, institutions, associations, professionals and students.
The Director General looks after the daily affairs of the Institute and Executive Council (EC) provides guidance and direction. Two other functional committees namely the Executive Committee of INSDAG (ECI) and Project Review Committee (PRC), provide administrative and technical guidance respectively. The Institute has defined its mission, role, and functions and has evolved its short, medium and long term Activity Plans.
The Institute primarily works towards the development of technology in steel usage and the market for the steel fraternity.
Creating awareness amongst potential users about affordability and benefits of steel.Providing prompt advisory service on materials, construction practices, interpretation of codes etc. and creating an environment for better usage of steel by acquiring and disseminating knowledge about the best practices.Upgrading the skills of the work force by organizing refresher courses / training programmers and offering better technical know-how, design aids and teaching aids.Communicating the benefits of steel vis-à-vis other competitive materials, through life cycle cost studies, where required.Providing requisite thrust to increase steel consumption in rural areas.Assisting in the development of ancillary industries, which boost the usage of steel and creating new market for steel usage.
Designing Steel intensive innovative StructuresPreparing guidebooks, directories, design aids and manuals Studying Life cycle cost Revising steel related Codes and Standards Providing guidance on Corrosion and Fire issuesHelping in selecting and sourcing steelProviding education and training to professionals, faculties and students Conducting national level award competitions for professionals and students. Providing consultancy in Steel based designProviding advisory services on interpretation of standards, construction techniques, cost-benefit analysis, best practices and bencmarks, sources of supply etc.
Members can avail on-demand advisory services from INSDAG on: interpretation of standards; construction techniques; cost-benefit analysis; best practices; benchmarks; sources of supply; welding and corrosion protection etc. INSDAG has created advisory desk for prompt response and introduced e-advisory module on its website www.steel-insdag.org for hosting steel related queries and obtaining replies from national experts in the fields.
INSDAG has published a library of books, design-aids and teaching-aids for easy access to information. INSDAG is publishing and circulating the latest developments in the construction and other steel consuming sectors through its technical journal-Steel in Construction and the in-house news bulletin-INSDAG NEWS. The Institute is also providing state of the art literature published by The Steel Construction Institute, UK through a copyright agreement for a selected list of documents.
Founding Member: Large steel producing companies and the Govt. representatives, who conceived and promoted the institute, are the Founding Members. All organizations having integrated operation for iron and steel production from iron ore and its derivatives are its founding member.Primary Member: Large organization such as producers of steel, fabricators, developers, builders, companies engaged in construction, designers, consultants, specifiers, architects, design institutes, educational & research institutes, interior decorators, engineering firms etc. can enroll themselves as primary members.Associate Members: Firms, companies, undertakings, overseas firms interested in steel usage can become Associate Members. There are two types of Associate Membership viz. Associate Members – A :Larger organizations / firms with more than 15 employees and Associate Members – B :Registered SSI units / small establishments having a maximum strength of employees upto 15.Institutional Member: All India or State local Professional Institutes / Organizations / Boards / Associations etc. dealing with collection and dissemination of information, research and development, process upgradation, exploration of new resources etc. are eligible for membership of the Institute.Individual Member: Any professional having interest in steel application and in upgradation of knowledge can become individual member. Individual member may opt for annual or life, membership.Honorary Member: Eminent Professionals connected with steel industry or those who have rendered distinguished service to the interests of the Institute can be elected as Honorary Member by the Executive Council.Student Member: Student of Civil Engineering / Architecture / Mechanical / Metallurgical & other allied Engineering disciplines at under graduate / post graduation/ Ph.D level are eligible for Student Membership and one time subscription to be paid at every level (Graduation, Post Graduation & PhD).
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Ø
Ø
Ø
Ø
Ø
Ø
Ø
INSDAG
“Ispat Pragati Bhawan”
793, Anandapur
Kolkata - 700 107
(Behind Fortis Hospital)
IN
SD
AG
IN
SD
AG
Design & Printed by: Florence Offset Process Pvt. Ltd.
“NOTICE OF INTENT” FOR PARTICIPATIONth(To be submitted latest by 30 November 2019)
National Competition for Professionals on Structural Steel Design & Construction 2016-18Applicants are required to fill up this nortice of intent and return the same to the address given below in a sealed envelope along with a DD as mentioned below. Member of INSDAG, need not send any DD, and can mention the membership number.
Name of the Firm :
Nature of Business :
Address :
Telephone no. :
Fax :
Email address :
Name of the authorized person:
Project name :
Location :
Client :
I/We agree to participate in the Competition organized by INSDAG for the year 2016-18. I/We also agree to become Associate Member of INSDAG (Category A or B, as applicable) by paying the required membership fees through Demand Draft drawn in favour of “Institute for Steel Development & Growth”, payable at Kolkata, enclosed herewith.
Authorised Signatory with Seal:
Date:
Mailing Address:
The Director GeneralInstitute for Steel Development & Growth (INSDAG)“Ispat Pragati Bhawan”793, AnandapurKolkata - 700 107Email: [email protected]/insdag@rediffmail,com
National Competition for Professionals on Structural Steel Design & Construction 2016-18st(Application form to be submitted latest by 31 December 2019)
Entries are restricted to steel / predominantly steel intensive structures situated in India that have been built by Indian steelwork contractors using steel predominantly sourced from India.
They must have been substantially completed and ready for occupation or use during the calendar years from 2004 to 2018 - previous entries, which did not get any award, are also eligible, if resubmitted.
The following must be fully completed (Block capitals)
Name of building or structure:
…………………………………………………..……..……..……..
…………………………………………………..……..……..……..
Location: ……………………………………….……..……..……..
…………………………………………………..……..……..……..
Year of Completion: ……..……..……..……..……..……..……...
………………………………………………….……………………
Completion date: ……………………………...……...……...……
Brief Description of Structure:...................................................
..................................................................................................
General dimensions: …………………………............................
Total quantity of Steel used (Tonne): …………………………....
..................................................................................................
Approximate total cost of entire project including lad cost (Rs)
………………….……….……
(Not less than 3.0 Crores)
Cost of Steelwork (Rs) ……………………….…….…….…….…
Type of structural sections used i.e. Angle Sections, I-sections, Channel Sections, SHS / RHS, tubes etc.
…………………………………………………..
Authorised Person submitting this entry:
…………………………………………………..……..……..……..
Tel: ………………… Email: ………………….…….…….…….…
Fax: …………………………………………….…….…….…….…
A description of the building / structure (pertaining to the type of construction, purpose and summary) of about 1000 words should be enclosed with your Entry including drawings and photographs.
Architects:
…………………………………………………..……..……..……..
Address: ……………………………………….…….…….…….…
…………………………………………………..…….…….……....
…………………………………………………..……..……..……..
Person who should be contacted:
Structural Engineers / Firms responsible for the design
……………………………………………………...……..……......
Address: ………………………………………….……..……..…..
……………………………………………………..……..…….......
……………………………………………………………..…….....
Person who should be contacted:
Steelwork Construction Agency
……………………………………………………………..…….....
Address: ………………………………………….……..…….......
……………………………………………………..……..……......
……………………………………………………..……..……......
Person who should be contacted:
Main Construction Agency
…………………………………………………….……..……......
Address: ………………………………………….……..……......
…………………………………………………..…………………
………………………………………..……..……..……..…….....
Person who should be contacted:
Owner
…………………………………………………….……..……......
Address: ………………………………………….……..……......
……………………………………………………..……..……......
……………………………………………………..……..……......
Person who should be contacted:
Tel: ………………… Email: ……………………..
DECLARATION OF ELIGIBILITY:
As the representative of the organization, I/we authorize the entry of this structure in the Structural Steel Design & Construction Award Competition 2016-18 and I/we declare that this steel/steel intensive structure is eligible for consideration as it has been fabricated by an Indian Contractor and built using steel predominantly sourced from India. It was completed and ready for occupation or use during the calendar years 2004 to 2018.
