National Guard Products, Inc.The products you count on. The people you trust.
he TThe prational Guard Products, Inc.N
eople yhe pTThe pount on.ou c count on.ts yducohe prational Guard Products, Inc.
.ou trust t.eople yational Guard Products, Inc.
2
National Guard Products, Inc.The products you count on. The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.comSy
mbols
/ Leg
end
Gasketi
ng fo
r use with
Doo
r Clos
ers
© NGP, Inc. 2014
Solid aluminum 700 Series:* No break in seal* Head not drilled* Side sections are furnished with slotted holes
for adjustment * Comes with self drilling #8 (Tek type) screws.* Closer and/or hold open device to be
attached to frame through weatherseal section.
10C S
Gasketing Compatiblewith Door Closers
neoprene
1 1/2" 5/16"
1/4"
700NA neoprene700NB700NDKB700SA silicone700SB700SDKB
Symbols/LegendADA COMPLIANT Barrier Free Thresholds meet the requirements of the 2010 ADA Standards forAccessible Design and ICC/ANSI A117.1-2009 Accessible and Usable Building and Facilities.
A - clearB - gold DKB - dark bronze
10C
S
POSITIVE PRESSURE CLASSIFIED by UL to ANSI/UL10C; complies with IBC, NFPA 80 and NFPA 252 for application to Steel fire doors rated up to 3 Hrs., and Wood fire doorsrated up to 90 minutes. (Ratings on some items vary and are noted.)
CLASSIFIED by UL to ANSI/UL10B and CAN/ULC-S104; complies with NFPA 80 and NFPA252 for application to Steel fire doors rated up to 3 Hrs., and Wood fire doors rated up to 90 min-utes. (Rating on some items vary and are noted.)
NGP-EDGE® SEALING SYSTEM, Classifed by UL to ANSI/UL10C Category ‘G’; required forCategory B wood fire doors to meet positive pressure requirements complying with IBC, and NFPA252. See individual products for maximum door size and ratings.
SMOKE & DRAFT CONTROL GASKETING, Classified by UL to ANSI/UL10C Category‘H’; complies with IBC, UL1784 and NFPA 105 for use on ‘S’ labeled Positive Pressure Steel firedoors rated up to 3 hours , and wood fire doors rated up to 90 minutes. (Ratings on some itemsvary and are noted.)
ACOUSTICAL TESTED to ASTM E90 Standard Test Method for Laboratory Measurement ofAirborne Sound Transmission Loss of Building Partitions and Elements, and ASTM E1408 StandardTest Method for Laboratory Measurement of the Sound Transmission Loss of Door Panels and DoorSystems. Refer to chart on page G5 for test result data.
AIR INFILTRATION TESTED to ASTM E283, Standard Test Method for Determining Rate of AirLeakage Through Exterior Windows, Curtain Walls, and Doors.
ANTI-MICROBIAL Proven to be up to 99% effective at killing a wide range of bacteria includingMRSA and E-coli. Independent laboratory tested to meet ISO 22196:2011.
ANSI/BHMA CERTIFIED. Certified gasketing complies with American National Standard for DoorGasketing and Edge Seal Systems ANSI/BHMA A156.22-2012, and is listed in the BHMA CertifiedProducts Directory.
Online product listings: www.ul.com/database
ESS
2 8 H 7
M
RSA
E-coli
NATIONAL GUARD PRODUCTS, INC. Phone 800-647-7874 [email protected] www.ngp.comFax 800-255-7874 [email protected]
3
Edge Sealing SystemsSmoke Seals
5020B Brown5020C Charcoal5020W White5020CL Clear1/2"
1/2"
Self-Adhesive Gasketing
TPE Batwing Smoke Seal
Available in 36”, 48”, 72”, 84”, 96” and 108” lengths
10C S
Edge Sealing System - Category “G” for 20 minute ratedcategory B wood doors perimeter application up to:single swing - 4’0 x 8’0 pairs - 8’0 x 8’0use 9550 at the meeting edge of pairsSmoke and Draft Control - Category “H” - Up to 3 hours steelfire doors; Up to 90 minutes wood fire doors
Meets requirements of ROHS Directive 2002/95/EC
1/2"
1/4"5050B Brown5050C Charcoal5050W White5050T Tan5050CL Clear 10C
S
ESS
Available in 17’, 20’, 21’, 25’ and 300’ rolls.
5070B Brown5070W White5070CL Clear1/2"
3/16"
Available in 36”, 48”, 72”, 84”, 96” and 108” lengths
10C S
5075B Brown5075W White5075CL Clear1/2"
3/8"
Available in 36”, 48”, 72”, 84”, 96” and 108” lengths
10C S
TPE Double Shark Fin Smoke Seal
TPE Triple Fin Smoke Seal
Smoke rated for perimeter and/ormeeting edge (Astragal) applications
9450B Brown9450C Charcoal9450W White
10C S
20, 45, 60, 90 Minute rated category B wood doorsperimeter application up to:
single swing 4’0 x 9’0 standard pair 8’0 x 9’0 use 9550 at the meeting edge
1/2"
11/16"
ESS
Silicone Bulb Fire and Smoke Seal
9450 Intumescent with TPE Fin Fire and Smoke Seal
20, 45, 60, 90 minute rated category B wood doors up to:single swing 4’0 x 9’0, perimeter applicationpairs 8’0 x 9’0, perimeter/meeting edge
Available in 36”, 48”, 84”, 96” and 108” lengths9550 Gray9550DKB Brown 10C S
ESS
1 9/16"
3/16"
9550 NGP-Edge® Intumescent withTPE Fins Fire and Smoke Seal
M
RSA
E-coli *
M
RSA
E-coli
M
RSA
E-coli
M
RSA
E-coli
M
RSA
E-coli
*
*
M
RSA
E-coli *Anti-microbial not available in clear
4
National Guard Products, Inc.The products you count on. The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Astragals
neoprene
9/16"
3/16"
3/16"
neoprene110NA 110NB110NDKB
3/16"
neoprene
1/4"7/8"
neoprene120NA 120NB120NDKB
Aluminum Housing:A = Clear B = Gold DKB = Dark bronze
All perimeter seals this page. 10C S
5/16"
5/16"
neoprene
7/8"
vinyl160V160VA 160VB160VDKB
5/16"
5/16"
neoprene
7/8"
neoprene137NA 137NB137NDKB
5/8"
3/16" 1/4"
vinyl
3/16"
vinyl152V 152VB152VDKB
3/4"
nylonbrush
7/16"
A626AA626BA626DKB
Perim
eter
silicone110SA 110SB110SDKB
silicone120SA 120SB120SDKB
silicone137SA 137SB137SDKB
1 3/8"
1/2"
1/4"
1/8"
158NA neoprene158NDKB
158SA silicone158SDKB
158VA vinyl158VDKB
158PA pile158PDKB Maximum Height 120”
Astra
gals
Perimeter Seals
silicone152S 152SB152SDKB
1 1/4" 1/4"Adjusting Range
13/16"
neoprene
103NA103NB103NDKB
1/2"
1 1/4" 1/4"Adjusting Range
silicone
neoprene107NA107NB107NDKB
silicone107SA107SB107SDKB
10C S
10C S
Adjustable Perimeter Seals
silicone160S160SA 160SB160SDKB
5/8" 3/8"
115NA115NB115NDKB 10C S
10C
10C
10C
19/32"
1"Max.Drop
2 1/4"
neoprene220NA220NB220NDKB
silicone220SA220SB220SDKB
nylon brush220WHA220WHB220WHDKB
Use with a threshold for maximum sealing capability. Nylon brush recommended for carpet applications where no threshold is provided.
2 5/16"
15/16"
7/8"Max.Drop
HEAVY DUTY
All productsthis page:
10C
1 1/2"
1/8"
3/4"
1/2"Max.Drop
320Vvinyl
Hollow Metal Doors
Fits 1 5/8” x 3/4” channel. May be field cut (up to4”) in length. A “furring strip” may be used tolower automatic door bottom when a deeperchannel is used.
Available 24” - 48” in length.Fire ratings apply to metal doors only.
1 1/2"
7/8"
Mortise required 15/16" x 1 5/8"
3/4" Max. Drop
423N neoprene
Tested to 1,000,000 cycles
Available 11” to 48” in length
320Nneoprene
320S silicone
1 7
/16"
9/1
6"
nylon brush
C627AC627BC627DKB
1/2"
vinyl
1 1/2"
3/4"101VA101VB101VDKB
1"
vinyl
7/8"
97VA97VB97VDKB
1"
7/16"
3/4"
678A678B678DKB
7/16"
1 1/4"
1/4"
vinyl
3/4"
1 3/4"
1/4"1/2"
vinyl
1 3/16"
312V312VDKB
1/2"vinyl
7/8"
1 3/4"
319EV319EVDKB
Door Sweeps
Door Shoes
neoprene200NA200NB200NDKB
silicone200SA200SB200SDKB
NATIONAL GUARD PRODUCTS, INC. Phone 800-647-7874 [email protected] www.ngp.comFax 800-255-7874 [email protected]
5
Automatic Door Bottoms
35EV35EVDKB
S
neoprene420NA 420NB420NDKB
Sadd
le Th
resh
olds
Typical Wall .125
4
1/4"
Typical Wall .109
4"
1/2"
Typical Wall .109 1/2"
* *
424E .60 lbs./ft.424EDKB .60 lbs./ft.
** VINYL FOOT SEAL used instead of caulking to increase the weather resistance of the threshold. Specify on order
All thresholds this page. 10C
Threshold Width413, 413DKB, 413BR 4”513, 513DKB, 513BR 5”613, 613DKB, 613BR 6”713, 713DKB, 713BR 7”813, 813DKB, 813BR 8”913, 913DKB 9”1013, 1013DKB 10”Note: Flute pattern varies with width of threshold
Threshold Width425E, 425EDKB 5”426E, 426EDKB 6”427E, 427EDKB 7”428E, 428EDKB 8”429E, 429EDKB 9”430E, 430EDKB 10”Note: Flute pattern varies with width of threshold
• mill finish aluminum standard• DKB - aluminum dark bronze finish• BR - Architectural Bronze alloy CDA 385
Slip-Resistance SIA FinishAvailable for better traction and slip-resistance. Suffix SIA .
Typical Wall .105
5"
1/2"
1/4"
896 .64 lbs./ft.896DKB .64 lbs./ft.
5"
1/2"Typical Wall .0781/4"
950 .50 lbs./ft.950DKB .50 lbs./ft.
ADA Compliant Bumper Seal Thresholds
ADA Co
mpliant Bum
per T
hresho
lds
Saddle Thresholds
*
*
6
National Guard Products, Inc.The products you count on. The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Bumper Seal
*
Seals against the doorproviding weather resistance
Vinyl ("V") suppliedunless other material is specified
Options:Neoprene ("N")Silicone ("S")Pile ("P")
**Pile insert not available
NATIONAL GUARD PRODUCTS, INC. Phone 800-647-7874 [email protected] www.ngp.comFax 800-255-7874 [email protected]
7
Half Saddle, Offset, Thermal Barrier & Stainless Steel Thresholds
4"
Typical Wall .250
1/2
"
324 1.20 lbs./ft.324DKB 1.20 lbs./ft.
5"
1/2"
Typical Wall .250
when installed with the non-beveled edge FLUSH with flooringor where no greater than 1/4” vertical rise occurs.
*
*
*
Typical Wall .125
5 1/2"
1/2"1/
4"1/
4"653 .78 lbs./ft.653DKB .78 lbs./ft.
7"
1/2" 1/
4"
Typical Wall .125 659 .89lbs./ft.659DKB .89 lbs./ft.
1/2"Typical Wall .110
Threshold Width8424, 8424DKB, 8424BR 4”8425, 8425DKB, 8425BR 5”8426, 8426DKB, 8426BR 6”8427, 8427DKB, 8427BR 7”8428, 8428DKB, 8428BR 8”8429, 8429DKB, 8429BR 9”8430, 8430DKB, 8430BR 10”Note: Flute pattern varies with width of threshold
Typical Wall .120
1/4"
5"
513SS 2.07 lbs./ft.
Typical Wall .120 1/2"
5"
512SS 2.07 lbs./ft.
Available in 4” to 10” width. 1st digit = width (ie: 4” = 413SS)
Available in 4” to 10” width. 1st digit = width (ie: 4” = 412SS)
Half Saddle Thresholds
Stainless Steel Saddle Thresholds #304 mill finish standardAvailable:Polished (US32)Brushed (US32D)
10C
10C
10C
10C
10C
10C
Offset Saddle Thresholds
Thermal Break Thresholds
325 1.32 lbs./ft.325DKB 1.32 lbs./ft.
8
National Guard Products, Inc.The products you count on. The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Slope = 1:12 All items this page10C
Ramp HeightWidthR50, R50DKB 1/2” 6”R75, R75DKB 3/4” 9”R100, R100DKB 1” 12”R125, R125DKB 1 1/4” 15”R150, R150DKB 1 1/2” 18”R175, R175DKB 1 3/4” 21”R200, R200DKB 2” 24”R225, R225DKB 2 1/4” 27” R250, R250DKB 2 1/2” 30”
Ramp Height Width (w) of ramp from offset
RO50, RO50DKB 1/2” 6”RO75, RO75DKB 3/4” 9”RO100, RO100DKB 1” 12”RO125, RO125DKB 1 1/4” 15”RO150, RO150DKB 1 1/2” 18”RO175, RO175DKB 1 3/4” 21”RO200, RO200DKB 2” 24”RO225, RO225DKB 2 1/4” 27” RO250, RO250DKB 2 1/2” 30”
1/4"
3/4" Offset
Return Closed Ends for Ramps
6”
RCE-9, RCE-9DKB 9”RCE-15, RCE-15DKB 15”RCE-21, RCE-21DKB 21”RCE-30, RCE-30-DKB 30”
(w)
814 Aluminum814SS Stainless steel standard with square edges, beveling available, min. width 4”, max width 36”, length 96”
48" Maximum
1/8"
818 Aluminum818BR Brass - Max width 36”, length 96”818SS Stainless steel standard with square edges, beveling available, min. width 3”
48" Maximum
3/8"
838 Aluminum
Cover Plates
Minimum width 4”, Maximum width 48”, Maximum length 144”
Minimum width 2”, Maximum width 48”, Maximum length 144”
48" Maximum
1/4"
10C
10C
10C
Minimum width 3”, Maximum width 48”, Maximum length 144”
Ramps • mill finish aluminum standard• DKB - aluminum dark bronze finish
Slip-Resistant SIA FinishAll ramps are available with our slip-resistant surface for better traction. Suffix “SIA”