NavigateWorx_Product_Catalog_Ver1.01.01

NavigateWorx is a place where even the experts get answers.

NavigateWorx

Product Catalog

• Industrial Ethernet Switches

• Industrial Media Converters

• Serial Device Servers

• POE Switches

www.navigateworx.com



• Industrial Ethernet Switches

• Industrial Media Converters

• Serial Device Servers

• POE Switches


Industrial Ethernet Switches

IES205 Series


IES205 series is a kind of unmanaged industrial Ethernet switches are entry-level industrial 5-port Ethernet switches that provide an

economical solution for your industrial Ethernet connection, support IEEE802.3/802.3u/802.3x. Dustproof and full close structure and the

IP30 case with LED indicators make the plug-and-play IES205 switches easy to use and reliable. These switches have been designed for harsh industrial environments.

Optional models Interface Input Voltage

Standard Model 10/100 Base-T(x) 100 Base-FX(SC/ST/FC)

IES205 5 - 12~48 VDC

IES205-1F 4 1

IES205-2F 3 2

Features IEEE802.3/ 802.3u/ 802.3x Interface: RJ45 Ports, optic fiber 100 M ports(SC/ST)

Transmission distance: Twisterpair:100 meters

Single-mode: 20, 40, 60, 80, 120Km, optional Multi-mode:2Km

Transmit type: Store and Forward switching process type

Switch properties: 1.0Gbps Backplane bandwidth, 1 K MAC Table Input Voltage: 12~48VDC

Operating temperature: -40 to 75°C

Packaging: IP30 protection, metal case Installation: Din-Rail mounting



IES308 Series


IES308 series are unmanaged smart plug-and-play industrial Ethernet switch, which can provide economical solution for your Ethernet.

Its dust proof fully sealed structure(IP30 protection), over-current, over-voltage and EMC protected redundant double power input(12-

48VDC) as well as built-in intelligent alarm design can help system main tenancy personnel monitor the network operation, which can work reliably in harsh and dangerous environment.



IES308 8 - 12~48 VDC Redundant

IES308-1F 7 1

IES308-2F 6 2

Features Standard: IEEE802.3, IEEE802.3x, IEEE802.3u Interface: 10/100BaseT-X(RJ45), 100Base-FX(SC/ST/FC) 10/100M,

F/H duplex, MDI/MDI-X auto negotiation

Transmission distance: Twisterpair:100 meters Single-mode: 20, 40, 60, 80, 120Km, optional

Multi-mode:2Km

Transmit type: Store and Forward Relay warning: Power failure and port break

Switch properties: 1.6Gbps Backplane bandwidth, 1 K MAC Table

Input Voltage: redundant 12~48VDC

Operating temperature: -40 to 75°C Packaging: IP30 protection, rugged high-strength metal case

Installation: Din-Rail mounting

NavigateWorx is a place where even the experts get answers. Industrial Ethernet Switches

IES205G is a kind of gigabit unmanaged Industrial Ethernet switch, it support 5 port 10/100/1000M RJ45 port, DC power supply (12-

48V). It adopted no fan, low power consumption design, IP30, corrugate high strength iron shell, the performance is more steadily.

ES208G is a kind of gigabit unmanaged Industrial Ethernet switch, it support 8 port 10/100/1000M RJ45 port, DC power supply (12-

48V). It adopted no fan, low power consumption design, IP30, corrugate high strength iron shell, the performance is more steadily.

Features IEEE802.3, IEEE802.3x, IEEE802.3u Interface: RJ45 Ports


Transmit type: Store and Forward switching process type Switch properties: 12Gbps Backplane bandwidth, 1 K MAC Table,

1 M bit Packet Buffer

Input Voltage: 12~48VDC

Operating temperature: -25 to 70°C Packaging: IP40 protection, metal case


Features IEEE802.3, IEEE802.3x, IEEE802.3u, IEEE802.3z Interface: RJ45 Ports


Transmit type: Store and Forward switching process type Switch properties: 12Gbps Backplane bandwidth, 8 K MAC Table,

1 M bit Packet Buffer

Input Voltage: 12~48VDC





IES2010-2GS Series


IES2010-2GS series is a type of plug-and-play industrial unmanaged redundant Ethernet switch, which supports 8 10/100M ports,

and 2 gigabit Ethernet ports (SFP slots). No fan, low consumption and industrial grade design. More steadily work capability. To satisfy

applications in different industrial environments, IES2010-2GS can also provide wide temperature type in accommodation with limit

temperature (-40 ~75°C) and we have got CE, FCC approvals.


Standard Model Gigabit(SFP) 10/100 Base-T(x) 100 Base-FX(SC/ST/FC)

IES2010-2GS 2 8 - 12~48 VDC Redundant

IES2010-2GS-4F 2 4 4

Features Standard: IEEE802.3, IEEE802.3x, IEEE802.3u Interface: RJ45 Ports, SPF slots




Switch properties: 5.6Gbps Backplane bandwidth, 8K MAC Table, 1M bit Packet Buffer

Input Voltage: 12~48VDC redundant dual inputs






IES3016 16 - 12~48 VDC Redundant

IES3016-2F 14 2

IES3016-4F 12 4

IES3016-6F 10 6

IES3016-8F 8 8


IES3016 Series

IES3016 series is a kind of unmanaged Industrial Ethernet switch which can meet every kind of industrial environment. All

components chosen for the switch are industrial level to ensure high performance. No fan, low consumption and industrial grade design.

More steadily work capability. Satisfy applications in different industrial environments.

Features Standard: IEEE802.3, IEEE802.3x, IEEE802.3u Interface: 10/100BaseT-X(RJ45), 100Base-FX(SC/ST/FC) 10/100M,

F/H duplex, MDI/MDI-X auto negotiation

Transmission distance: Twister pair cable 100 meters Single-mode: 20, 40, 60, 80, 120Km, optional

Multi-mode:2Km

Transmit type: Store and Forward Relay warning: Power failure and port break

Switch properties: 12.8Gbps bandwidth, 8K MAC address table,

3Mbits buffer memory Input Voltage: redundant 12~48VDC, Overload current, reverse

polarity protection



NavigateWorx is a place where even the experts get answers. Industrial Ethernet Switches

IES206G-2GS is a kind of industrial, unmanaged, gigabit Ethernet switch. It supports 4 por10Base-T/100Base-TX/1000 Base-TX

Ethernet port and 2 port 1000Base-X SFP fiber port, no fan, low consumption design, it can work steadily in -40 ~85°C working temperature, it can provide reliable and quickly solution for your Ethernet device.

IES1016L/1024L/IES1026L-2F is a kind of unmanaged

Industrial Ethernet switches consists of 16 Ethernet ports/24 Ethernet ports/24 Ethernet ports and 2 Fiber ports that provide an economical solution for your

Ethernet connection.

Features IEEE802.3, IEEE802.3x, IEEE802.3u Interface: RJ45 Ports, SFP slots

Transmission distance: Twister pair cable 100 meters

Single –mode: 20, 40, 60, 80, 120Km, optional Multi-mode: 2Km


Switch properties: 12Gbps Backplane bandwidth, 1 K MAC Table, 1M bit Packet Buffer Input Voltage: 12~48VDC

Packaging: IP40 protection, metal case


Features IEEE802.3, IEEE802.3x, IEEE802.3u Interface: RJ45 Ports, 100Base-FX(SC/ST/FC)

Transmission distance: Twister pair cable 100 meters

Single –mode: 20, 40, 60, 80, 120Km, optional Multi-mode: 2Km


Switch properties: 5.6Gbps Backplane bandwidth, 8K MAC Table, 1M bit Packet Buffer

Input Voltage: DC100~300V or AC85~264V

Operating Temperature: -10 to 60°C Packaging: IP30 protection, metal case

Installation: 19-inch rack mount



IES215 Series


IES215 series is a kind of entry-level 5-port unmanaged Industrial Ethernet Switches that provide an economical solution for your

industrial Ethernet connection, support IEEE802.3/802.3u/802.x. Dust proof and full close structure and the IP40 metal case with LED

indicators make the plug-and-play IES215 switches easy to use and high reliable. It has been designed for harsh industrial environments.



IES215 5 - 12~48 VDC

IES215-1F 4 1

IES215-2F 3 2

Features IEEE802.3/ 802.3u/ 802.3x Interface: 10Base-T/100Base-TX(RJ45), 100Base-FX(SC/ST)

Transmission distance: Twister pair cable100m


Transmit type: Store and Forward

Switch properties: 1.0Gbps Backplane bandwidth, 2K MAC Table Input Voltage: 12~48VDC


Packaging: IP40 protection, rugged high-strength metal case Installation: Din-Rail mounting



IES3020-4GS Series


IES3020-4GS series is a unmanaged Industrial Ethernet switch with high performance, high cost-effective , it provided 12 port

10Base-T/100Base-TX Ethernet+ 4 port 100Base-FX optic fiber+ 4 port 1000Base-FX SFP slot. It supports auto flow control, full/half

duplex mode and MDI/MDI-X self-adaption. It built in standard industry design, all components are based on Industry grade, no fan, low consumption, can satisfied some kinds of requirements of industry field, to achieve high reliability.



IES3020-4GS 4 16 - 12~48 VDC redundant

IES3020-4GS-2F 4 14 2

IES3020-4GS-4F 4 12 4

Features IEEE802.3/ 802.3u/ 802.3x/802.3z Interface: 12/14/16 port 10/100Base-T-X, 2/4 port 100Base-FX+ 4

port gigabit(SFP slots)

Transmission distance: Twister pair cable100m Single-mode: 20, 40, 60, 80, 120Km, optional

Multi-mode:2Km

Transmit type: Store and Forward Switch properties: 12.8Gbps bandwidth, 8K MAC address Table,

3Mbits buffer memory

Input Voltage: 12~48VDC redundant power supply input





IES1024 Series


IES1024 series is a type of plug-and-play industrial unmanaged redundant Ethernet switch, which supports 24 10/100Base-T(x)

interfaces. No fan, low consumption and industrial grade design. More steadily work capability. To satisfy applications in different industrial

environments, IES1024 can also provide wide temperature type in accommodation with limit temperature (-40 ~ 75°C) and we have got CE, FCC approvals.



IES1024 24 - 110~220VDC Or

100~240VAC IES1024-2F 22 2

IES1024-4F 20 4

IES1024-8F 16 8

IES1024-12F 12 12

IES1024-16F 8 16

IES1024-20F 4 20

IES1024-24F 0 24

Features IEEE802.3/ 802.3u/ 802.3x Interface: 10Base-T/100Base-TX(RJ45), 100Base-FX(SC/ST/FC)




Input Voltage: DC110~220V or AC 100~240V


Installation: 1U 19-inch rack mount



IES1028-4GS Series


IES1028-4GS series support 24 port 10Base-T/100BaseTX +4 port 1000Base-FX SFP; no fan, low consumption, industry 4 grade

design, can adapt rugged industry environment; -40～85℃ working temperature can satisfy some requirements of industry filed, can

provide economical solution for your Ethernet connection.



IES1028-4GS 4 24 - 110~220VDC Or

100~240VAC IES1028-4GS-2F 4 22 2

IES1028-4GS-4F 4 20 4

IES1028-4GS-8F 4 16 8

IES1028-4GS-12F 4 12 12

IES1028-4GS-16F 4 8 16

IES1028-4GS-20F 4 4 20

IES1028-4GS-24F 4 0 24

Features IEEE802.3/ 802.3u/ 802.3x Interface: 10Base-T/100Base-TX(RJ45), 100Base-FX(SC/ST/FC)

gigabit(SFP slots)


Multi-mode:2Km

Transmit type: Store and Forward Switch properties:12.8Gbps bandwidth, 8K Mac address table

Input Voltage: DC110~220V or AC 100~240V


Installation: 1U 19-inch rack mount



IES608 Series


IES608 series are a type of plug-and-play industrial managed redundant Ethernet switch, which supports 8 10/100Base-T(x) or 6

10/100Base-T(x) + 2 100Base-FX interfaces. The 7 and 8 ports are used to establish SW-Ring for the purpose accomplishing redundancy

for Ethernet ring network (self-recovery time <20ms) to enhance the reliability of the network.



IES608 8 - 12~48 VDC redundant

IES608-2F 6 2

IES608-4F 4 4

Features IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.1Q, IEEE802.1P,

IEEE802.1D, IEEE802.1W

Protocol: SW-Ring(Self-recovery time<20ms), QoS, VLAN, PVLAN,

GMRP, Port Trunking, Port Mirroring Interface: 10/100BaseT-X(RJ45), 100Base-FX(SC/ST/FC)




Switch properties: 2Gbps bandwidth, 2K MAC address Table,1Mbits buffer memory

Input Voltage: 12~48VDC, Overload current, reverse polarity protection





IES7110-2GS Series




IES7110-2GS-2F 2 6 2

IES7110-2GS-4F 2 4 4

Features IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.3z,

IEEE802.3ad,IEEE802.1Q, IEEE802.1P, IEEE802.1D,

IEEE802.1W, IEEE802.1x

Protocol: ARP, ICMP, TCP, UDP, DHCP, DNS, HTTP, Telnet, SW-Ring(Self-recovery time<20ms), RSTP, SNMP

Interface: 10/100BaseT-X(RJ45), 100Base-FX(SC/ST/FC),

gigabit(SFP slots) Transmission distance: Twister pair cable100m

Single-mode: 20, 40, 60, 80, 120Km, optional

Multi-mode:2Km Transmit type: Store and Forward

Switch properties: 5.6Gbps bandwidth, 8K MAC address

Table,3Mbits buffer memory Input Voltage: 12~48VDC, Overload current, reverse polarity

protection



IES7110-2GS series is a industrial grade, managed and

redundancy Ethernet switch. It provided some kinds of advanced

network managed function, like as: SW-Ring redundancy ring network, VLAN, Trunking, Quality of Service, Speed control, port

mirroring, fault alarm and firmware upgrade online. SW-Ring can

bring your Ethernet to intelligent redundancy. Standard Industry design, can satisfied every requirement of the industry scene. All

components used industry grade, it takes products high reliability.

It provided wide voltage power supply input.

SWRingTM is designed as a rapid redundancy network

arithmetics . It provided recover technology for fault of rapid redundant network, the recovery time<20ms.



IES7110-3GS Series

IES7110-3GS Gigabit managed redundant industrial

Ethernet switch is equipped with up to 3 port Gigabit(making it

ideal for building a Gigabit SW-Ring(No.8, No.9), but leaving a spare Gigabit port for uplink use. The Ethernet redundant SW-

Ring (recovery time < 20 ms) can increase system

reliability switches and the availability of your network backbone. The IES7110-3GS series is designed with industrial standard,

can be suited to the applications in different industrial

environments.

The IES7110-3GS series supports numerous intelligent network

management functions, including such as QoS, VLAN, Port Trunking, velocity configuration and alarm enabling functions.










Table,3Mbits buffer memory Input Voltage: 12~48VDC, Overload current, reverse polarity

protection



Application



IES6116 Series


IES6116 is a high performance and high cost performance Industrial managed Ethernet switches. It provided 16 ports 10Base-

T/100BaseTX Ethernet, it adopt SW-Ring redundant technology (Recovery time<20ms), users can set the redundant easily to increase

network reliability, furthermore, it can also support numerous intelligent network management functions, like as IGMP, RSTP, 802.1Q VLAN, QOS, port trunking and port mirroring etc, It adopted no fan, low power consumption design, IP40, corrugate high strength iron

shell, the performance is more steadily.



IES6116 16 - 12~48 VDC redundant

IES6116-2F 14 2

IES6116-4F 12 4

IES6116-6F 10 6

IES6116-8F 8 8

Features IEEE802.3/802.3u/802.3x, IEEE802.1Q/802.1P/802.1D/802.1W Protocol: SW-Ring(Self-recovery time<20ms), QoS, VLAN,

PVLAN, GMRP, Port Trunking, Port Mirroring

Interface: 10/100BaseT-X(RJ45), 100Base-FX(SC/ST) Transmission distance: Twister pair cable100m




Table,3Mbits buffer memory Input Voltage: Redundant 12~48VDC





IES7120-4GS Series


IES7120-4GS series is a industrial grade, managed and

redundancy Ethernet switch. Which can support 24 RJ45

Ethernet Ports and 4 Gigabit ports. IES7120 series adopt our patent technology SW-Ring for the purpose accomplishing

redundancy for Ethernet ring network(self-recovery time<20ms)to

enhance the reliability of the network. Furthermore, IES7120-4GS series can also support numerous intelligent network

management functions, including QoS, VLAN, Port Trunking,

velocity configuration and alarm enabling functions. To satisfy applications in different industrial environments. IES7120-4GS

series can also provide wide temperature type in accommodation with limit temperature(-40～75℃ ).




IES7120-4GS-2F 4 14 2

IES7120-4GS-4F 4 12 4

Features IEEE802.3, IEEE802.3um, IEEE802.3x, IEEE802.3z,




Interface: 12/14/16 port 10/100BaseT-X, 2/4 port 100Base-FX +

4 port gigabit(SFP slots) Transmission distance: Twister pair cable100m




Table,3Mbits buffer memory Input Voltage: 12~48VDC redundant power supply input




IES5024 is a type of plug-and-play industrial managed

redundant Ethernet switch, which supports 24 10/100Base-T(x) s.

All ports are used to establish SW-Ring for the purpose accomplishing redundancy for Ethernet ring network (self-

recovery time <20ms) to enhance the reliability of the network.

Furthermore, IES5024 can also support numerous intelligent network management functions, including QoS, VLAN, Port

Trunking, velocity configuration and alarm enabling functions. To

satisfy applications in different industrial environments, IES5024 can also provide wide temperature type in accommodation with

limit temperature (-40 ~ 75°C).


IES5024 Series




IES5024 24 - 110~220VDC Or

100~240VAC IES5024-2F 22 2

IES5024-4F 20 4

IES5024-8F 16 8

IES5024-12F 12 12

IES5024-16F 8 16

IES5024-20F 4 20

IES5024-24F 0 24







Multi-mode:2Km

Transmit type: Store and Forward Switch properties: 5.2Gbps bandwidth, 8K MAC address

Table,3Mbits buffer memory

Input Voltage: DC110~220V or AC110~240V


Installation: 1U 19inch standard installation



IES5028-4GS Series


IES5028-4GS series is a kind of High performance, high

cost performance, high-end intelligence managed Industrial

Ethernet switch, it can provide some high-end management function, like as: SW-Ring, VLAN, trunking, QOS, rate control,

port mirroring, alarm and firmware upgrade online. Its distinctive

SW-Ring redundant network function can take your Ethernet intelligence redundant. Aim at security problem in currently LAN,

provide some security function, like as 802.1X certificate etc and

provide Visualization WEB operation interface.



IES5028-4GS 4 24 - 110~220VDC Or

100~240VAC IES5028-4GS-2F 4 22 2

IES5028-4GS-4F 4 20 4

IES5028-4GS-8F 4 16 8

IES5028-4GS-12F 4 12 12

IES5028-4GS-16F 4 8 16

IES5028-4GS-20F 4 4 20

IES5028-4GS-24F 4 0 24










Table,3Mbits buffer memory Packaging: IP30 protection, rugged high-strength metal case

Installation: 1U 19inch standard installation



IES605-2D Series


IES605-2D series industrial Ethernet switches integrated

serial device server function, it adopt SW-Ring redundant

technology(Recovery time<20ms), users can set the redundant easily to increase network reliability, furthermore,

IES605-1F-2D can support 2 ports RS232, AT command and

alarm output, It adopted no fan, low power consumption design, IP30, corrugate high strength iron shell, the performance is more

steadily. It accorded with CE, FCC standard and Industrial 4

grades, DIN rail installation and wide operating temperature (-40~75C), it can satisfied some kinds of industrial environment, it

can provide reliable and quickly solution for your Ethernet device.


Standard Model 10/100 Ethernet 100M Fiber(SC/ST/FC) Serial port

SM or MM RS-232 RS-485/422

IES605-2D(RS-485) 5 - - 2 12~48 VDC redundant

IES605-2D(RS-232) 5 - 2 -

IES605-1F-2D(RS-485) 4 1 - 2

IES605-1F-2D(RS-232) 4 1 2 -

IES605-2F-2D(RS-485) 3 2 - 2

IES605-2F-2D(RS-232) 3 2 2 -

Features IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.3Q, IEEE802.3p,

IEEE802.1D, IEEE802.1W,

Protocol: ARP, ICMP, TCP, UDP, DHCP, DNS, HTTP, Telnet,

SW-Ring(Self-recovery time<20ms), RSTP, SNMP Interface: 10/100BaseT-X(RJ45), 100Base-FX(SC/ST/FC), RS-

232(DB9 male), RS-485/422(Terminal block)


Multi-mode:2Km

RS-232: 15m, RS-485/422: 1200m Transmit type: Store and Forward


Table,1Mbits buffer memory Input Voltage: Redundant 12~48VDC, Overload current, reverse

polarity protection





IES618-4D Series


IES618-2F-4D series is a industrial, management,

redundant industrial Ethernet switch and integrate 4 port RS-232

serial device server, The serial ports can config to port RS-232 or RS-485/422. SW-Ring redundant technology (Recovery

time<20ms), users can set the redundant easily to increase

network reliability, furthermore, It adopted no fan, low power consumption design, IP40, corrugate high strength iron shell, the

performance is more steadily. It accorded with CE, FCC standard

and Industrial 4 class, DIN rail installation and wide operating temperature (-40~85C), it can satisfied some kinds of industrial

environment, it can provide reliable and quickly solution for your

Ethernet device.


Standard Model 10/100 Ethernet 100M Fiber(SC/ST/FC) Serial port

SM or MM RS-232 RS-485/422

IES618-4D(RS-485) 8 - - 4 12~48 VDC redundant

IES618-4D(RS-232) 8 - 4 -

IES618-2F-4D(RS-485) 6 2 - 4

IES618-2F-4D(RS-232) 6 2 4 -

IES618-4F-4D(RS-485) 4 4 - 4

IES618-4F-4D(RS-232) 4 4 4 -

Features IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.1Q,

IEEE802.1P, IEEE802.1D, IEEE802.1W

Protocol: ARP, ICMP, TCP, UDP, DHCP, DNS, HTTP, Telnet,

SW-Ring(Self-recovery time<20ms), RSTP, SNMP Interface: 10/100BaseT-X(RJ45), 100Base-FX(SC/ST/FC), RS-

232(DB9 male), RS-485/422(Terminal block)


Multi-mode:2Km

RS-232: 15m, RS-485/422: 1200m Transmit type: Store and Forward


Table,1Mbits buffer memory Input Voltage: Redundant 12~48VDC, Overload current, reverse

polarity protection



NavigateWorx is a place where even the experts get answers. Industrial Media Converter

IMC101-F is a speediness 10/100Base-TX Industrial

Ethernet Media Converter, easy to connect server, repeater, switch, device to device, Can satisfy customers require for long

distance, high speed, wide broadcast., plug-and-play.IMC101

series supports 1 TP ports and 1 fiber ports. TP(RJ45) support 10/100Base-T(X), Full/Half duplex mode, and auto MDI/MDI-X

connection; 100BaseFX supports single-/multi-mode, SC/ST

connector, optional.

IMC101 adopt industry standard design, IP30 protection, rugged

high-strength metal case, power supply input(12V～36VDC), -40

to 75°C working temperature.

IMC102-F is a speediness 10/100Base-TX Industrial

Ethernet Media Converter, easy to connect server, repeater, switch, device to device, Can satisfy customers require for long

distance, high speed, wide broadcast. Beside this, IMC102 series

supports 2 TP ports and 1 fiber ports. TP(RJ45) support 10/100Base-T(X), Full/Half duplex mode, and auto MDI/MDI-X

connection; 100BaseFX supports single-/multi-mode, SC/ST

connector, optional.

IMC102 adopt industry standard design, IP30 protection, rugged

high-strength metal case, power supply input(12V～36VDC), -40

to 75°C working temperature.

Features IEEE802.3, IEEE802.3x, IEEE802.3u Interface: 10/100BaseT-X(RJ45), 100Base-FX(SC/ST/FC)


Single-mode: 20, 40, 60, 80, 120Km, optional Multi-mode: 500m


Input Voltage: 24VDC(12~36VDC)



Features IEEE802.3, IEEE802.3x, IEEE802.3u Interface: 10/100BaseT-X(RJ45), 100Base-

FX(SC/ST/FC)


Multi-mode: 500m

Transmit type: Store and Forward Input Voltage: 24VDC(12~36VDC)




IMC101GT is a kind of industrial gigabit media

converter, it support 1 10Base-T/100Base-TX/1000 Base-TX port and 1 1000Base-X SFP port. It support LFP

function, it is easy to check the network connection

status,, it also support CE,FCC standard, IMC101GT adopt industry standard design, IP40 protection, rugged

high-strength metal case, power supply input(12V～48VDC), -40 to 85°C working temperature.

IMC102GT is a kind of industrial gigabit media

converter, it support 2 port 10Base-T/100Base-TX/1000 Base-TX and 1 port 1000Base-X SFP . It is

easy to check the network connection status, It also

support CE,FCC standard, IMC102GT adopt industry standard design, IP40 protection, rugged high-

strength metal case, power supply input(12～48VDC),

-40 to 85°C working temperature.

Features IEEE802.3, IEEE802.3x, IEEE802.3u Interface: 10/100/1000BaseT-X port and 1000Base-FX SFP(slots)




Input Voltage: DC12-48V power supply input



Features IEEE802.3, IEEE802.3x, IEEE802.3u Interface: 10/100/1000BaseT-X port and 1000Base-FX SFP(slots)




Input Voltage: DC12-48V power supply input




IMC101GT-1GF is a kind of industrial gigabit

media converter, it support 1 10Base-T/100Base-TX/1000 Base-TX port and 1 1000Base-FX Fiber port. It

support LFP function, it is easy to check the network

connection status, it also support CE,FCC standard, IMC101-GF adopt industry standard design, IP40

protection, rugged high-strength metal case, power

supply input(12V～48VDC), -40 to 85°C working temperature.

IMC101B is a fast 10/100Base-TX Industrial Ethernet

Media Converter, easy to connect server, repeater, switch, device to device, Can satisfy customers require for long

distance, high speed, wide broadcast.IMC101B series support

2 TP ports and 1 fiber ports. TP(RJ45) support 10/100Base-T(X), Full/Half duplex mode, and auto MDI/MDI-X connection;

100BaseFX supports single-/multi-mode, SC/ST connector,

optional.

IMC101 adopts industry standard design, IP30 protection,

rugged high-strength metal case, power supply input(12V～48VDC), -40 to 75°C working temperature.

Features IEEE802.3, IEEE802.3x, IEEE802.3u Interface: 10/100/1000BaseT-X port and 1000Base-FX

SFP(slots)


Multi-mode: 500m

Transmit type: Store and Forward Input Voltage: DC12-48V power supply input



Features IEEE802.3, IEEE802.3x, IEEE802.3u Interface: 10/100BaseT-X, 100Base-X SFP(slots)

Transmission distance: Twisterpair:100 m



Input Voltage: 24VDC(12-48VDC)




IMC102B is a speediness 10/100Base-TX Industrial Ethernet Media Converter, easy to connect server, repeater, switch,

device to device, Can satisfy customers require for long distance, high speed, wide broadcast. Beside this, IMC102B supports electric working mode/rate setting.

IMC102B series support 2 TP ports and 1 fiber ports. TP(RJ45) support 10/100Base-T(X), Full/Half duplex mode, and auto MDI/MDI-X connection; 100BaseFX supports single-/multi-mode, SC/ST connector, optional.

IMC102 adopts industry standard design, IP30 protection, rugged high-strength metal case, power supply input(12V～48VDC), -

40 to 75°C working temperature.

Features IEEE802.3, IEEE802.3x, IEEE802.3u Interface: 10/100BaseT-X, 100Base-X SFP(slots)

Transmission distance: Twisterpair:100 m



Input Voltage: 24VDC(12-48VDC)




Serial Device Servers

NP301

NP301 serial device server is designed to make your serial devices internet ready instantly. It provides 1 port RS232/485/422 (RS232,

DB9M; RS485/422, 5 bit terminal block) and 1 port 10/100Base-T(X).It makes them ideal choice for connecting decentral serial devices

and Host computer to an IP based Ethernet, making it easily and conviniently for your management. Its software can be setting and updating by serial program group in the application. It supports TCP, UDP, ARP, ICMP, DHCP and Windows Native COM, LLF functions.

What's more, NP301 serial devices server provides powerful management configuration tools based on Windows, guiding users’ configuration of the devices step by step. All configurations can be done by network and serial port, supporting communication across

gateway and router. In addition, it allows users to configurate flexibly IP address, Server or Client mode, size of packet, etc.

NP301 serial device sever is designed with EMC protection, and power supply have overcurrent and overvoltage protection. These make

it woking stably in hazardous environment. Easy wall and DIN-Rail mounting.

Features Adopt 32 bit ARM processor Support 3-in 1 RS-232/RS-485/RS-422 serial interface

Support TCP, UDP, ARP, ICMP, HTTP and DHCP protocol

Support across gateway, router communication Support standard TCP/IP SOCKET

Support Virtual serial driver access and auto connect after the network

disconnect Support network and serial interface configuration mode

Support DIN-Rail or wall mounting installation

Working Temperature: -40 to 75°C Connector: Ethernet: RJ45, RS-232: DB9 male, RS-485/RS-422:

terminal block

Baud rate: 300-115200bps Transmission distance: Twister pair cable100m, RS-232: 15m, RS-

485/422: 1200m

Power supply: DC9-48V power supply input Protection: 1500W surge protection, 15KV static protection

IP30 protection, rugged high-strength metal case



NP302T-2D Series

NP302T-2D series can conveniently connect up to 2 serial devices to an Ethernet, allowing you to network your exiting serial devices

with only basic configuration. With NP302 series, you can both centralize the management of your serial devices, and distribute

management hosts over the network.

NP302 series can be used to connect different devices for remote management, each serial port operates independently to provide

maximum versatility, each port can be operate in Driver, TCP Server and TCP Client mode independently.


Standard Model 10/100 Ethernet Serial port

RS-232 RS-485/RS-422

NP302T-2D(RS-232) 1 2 - 5VDC or 9-36VDC

NP302T-2D(RS-485) 1 - 2

Features Adopt 32 bit ARM processor, 125 DMIPS manage ability 2 serial ports, with support for RS-232/RS-485/RS-422

Support TCP, UDP, ARP, ICMP, HTTP, TELNET and DHCP protocol



disconnect Choice of configuration methods: Windows, TELNET and WEB


Connector: Ethernet: RJ45, RS-232: DB9 male, RS-485/RS-422: terminal block Baud rate: 300-115200bps

Power supply: DC5V or DC9-36V power supply input

Working Temperature: -40 to 85°C 600W surge protection, 8KV static protection




NP304T-4D Series



RS-232 RS-485/RS-422

NP304T-4D(RS-232) 1 4 - 5VDC or 9-36VDC

NP304T-4D(RS-485) 1 - 4










disconnect Choice of configuration methods: Windows, TELNET and WEB


Connector: Ethernet: RJ45, RS-232: DB9 male, RS-485/RS-422: terminal block

Baud rate: 300-115200bps






NP308T-8D Series



RS-232 RS-485/RS-422

NP308T-8D(RS-232) 1 8 - 5VDC or 9-36VDC

NP308T-8D(RS-485) 1 - 8









Support Virtual serial driver access and auto connect after the

network disconnect Choice of configuration methods: Windows, TELNET and WEB


Connector: Ethernet: RJ45, RS-232: DB9 male, RS-485/RS-422: terminal block

Baud rate: 300-115200bps






NP3016T-16D Series




RS-232 RS-485/RS-422

NP3016T-16D(RS-232) 1 16 - 5VDC or 9-36VDC

NP3016T-16D(RS-485) 1 - 16


Support TCP, UDP, ARP, ICMP, HTTP, TELNET and DHCP

protocol Support across gateway, router communication

Support standard TCP/IP SOCKET

Support Virtual serial driver access and auto connect after the network disconnect

Choice of configuration methods: Windows, TELNET and WEB

Support DIN-Rail or wall mounting installation Connector: Ethernet: RJ45, RS-232: DB9 male, RS-485/RS-422:

terminal block

Baud rate: 300-115200bps Power supply: DC5V or DC9-36V power supply input

Working Temperature: -25 to 70°C

600W surge protection, 8KV static protection IP30 protection, rugged high-strength metal case

NP3016T-16D series can conveniently connect up to 16

serial devices to an Ethernet, allowing you to network your

exiting serial devices with only basic configuration. With NP304 series, you can both centralize the management of your serial

devices, and distribute management hosts over the network.

NP3016 series can be used to connect different devices for

remote management, each serial port operates independently

to provide maximum versatility, each port can be operate in Driver, TCP Server and TCP Client mode independently.


POE Switches

ES1005-4POE Series


ES1005-4POE series is a Fast Ethernet Unmanaged

POE Switches supports 5* 10/100M auto-negotiation Base-T

ports (including 4* IEEE 802.3af/at-compliant POE ports, free of power lines).

ES1005-4POE-65W-P(220VAC) Plug-and-Play design, easy to install and operate. It Supports a maximum output power

of 30W on every single POE port and a maximum

transmitting distance of 100m,Works with wireless access points, surveillance cameras, IP phones, PDAs and other

POE supported devices. It is the excellent choice for

Wireless City, Security Surveillance Industry or other network scenarios.

Optional models Interface Output Power(Watt) Input Voltage

Standard Model Gigabit(SFP) 10/100 M 10/100M(POE)

ES1005-4POE-45W - 1 4 45 90~264 VAC

ES1005-4POE-60W - 1 4 60

Features Compatible with both IEEE802.3at(30W) and IEEE802.3af(15.4W) Automatically detect and supply power to IEEE802.3at and

IEEE802.3af compliant powered devices(PDs)

Advanced SAFC function, only supply power to IEEE802.3af/at compliant PDs, no worry about damaging other private standard

POE devices or devices without POE function

Support port power supply prioritization, guarantee the continuous power supply of key nodes

Up to 100m network cable transmitting distance

Built-in PSE power supply module, plug-and play design High security performance defending against power surge

Support short-circuit protection function

Energy-saving green design, support auto-switch to standby mode and auto-detect cable length

1 Gbps bandwidth, 1K MAC address table

Input Voltage: 90~264VAC

Operating Temperature: -20~50°C


POE Switches

ES1008-8POE


ES1008-8POE is a Fast Ethernet Unmanaged POE Switches supports 8* 10/100M auto-negotiation Base-T ports (including 8*

IEEE 802.3af/at-compliant POE ports, free of power lines).

ES1008-8POE-150W-P(220VAC) Plug-and-Play design, easy to install and operate. It Supports a maximum output power of 30W on

every single POE port and a maximum transmitting distance of 100m,Works with wireless access points, surveillance cameras, IP

phones, PDAs and other POE supported devices. It is the excellent choice for Wireless City, Security Surveillance Industry or other network scenarios.

Features Compatible with both IEEE802.3at(30W) and IEEE802.3af(15.4W) Automatically detect and supply power to IEEE802.3at and IEEE802.3af

compliant powered devices(PDs)

Advanced SAFC function, only supply power to IEEE802.3af/at compliant PDs, no worry about damaging other private standard POE devices or devices

without POE function





Energy-saving green design, support auto-switch to standby mode and auto-detect cable length





ES5018-16POE series is Managed PoE switches support

both 10/100M ports and 10/100/1000M ports. All of the copper

ports of the ES5018-16POE-150W-P(220VAC) provide PoE Power Injector function, complying with IEEE 802.3at compliant

powered devices with maximum up to 30 watts of power per port.

The Switches also come with 2 SFP slots expanding your network flexibly. In addition, it provides high performance, enterprise-level

QoS, advanced security strategies. With all these advanced

features, the PoE Switch are ideal choice for small and medium business networking.

With ES5018-16POE-300W-P(220VAC) PoE Switches, you are free to position equipments wherever they should be and power

to the unit with the data over the Ethernet cable, not being limited

by the power outlet. You can remotely reboot the device without having to climb up to or go to the device - just remove its Ethernet

cable from the switch end as adopting PoE. All ports ES5018-

14POE-300W-P(220VAC) PoE Switches are auto-sensing that make each port only provide power as detecting the presence

of 802.3af /at PoE supported devices.

POE Switches

ES5018-16POE Series



ES5018-16POE-150W 2 2 14 150 90~264 VAC

ES5018-16POE-300W 2 2 14 300









Support simple WEB management 10.8Gbps bandwidth, 16K MAC address table




POE Switches

ES5026-24POE Series

ES5026-24POE series is Managed PoE switches

support both 10/100M ports and 10/100/1000M ports. All of

the copper ports of the ES5026-24POE-450W-P(220VAC) provide PoE Power Injector function, complying with IEEE

802.3at compliant powered devices with maximum up to 30

watts of power per port. The Switches also come with 2 SFP slots expanding your network flexibly. In addition, it provides

high performance, enterprise-level QoS, advanced security

strategies. With all these advanced features, the PoE Switch are ideal choice for small and medium business networking.

With ES5026-24POE-450W-P(220VAC) PoE Switches, you are free to position equipments wherever they should be and

power to the unit with the data over the Ethernet cable, not

being limited by the power outlet. You can remotely reboot the device without having to climb up to or go to the device -

just remove its Ethernet cable from the switch end as

adopting PoE. All ports ES5026-24POE-450W-P(220VAC) PoE Switches are auto-sensing that make each port only

provide power as detecting the presence of 802.3af /at PoE

supported devices



ES5026-24POE-300W 2 4 20 300 90~264 VAC

ES5026-24POE-450W 2 4 20 450









Energy-saving green design, Support simple WEB management





POE Switches

ES5010-2GS-8POE


ES5010G-2GS-8POE is Full gigabit , managed , 8-port Gigabit high power (IEEE 802.3at) PoE Switches, utilizing a compact

factor which can be mounted in a 19-inch rack with rack-mounting kits or placed on desktop.

With data and power supported by one unit, the ES5010G-2GS-8POE-150W-P(220VAC) shall reduce cables and eliminate the need for

dedicated electrical outlets on the wall, ceiling or any unreachable place. Auto PoE detection and Plug and play installation makes

P3000M series Gigabit PoE Switch easy to use and with clear LED indicators to tell the working condition.

Features Compatible with both IEEE802.3at(30W) and

IEEE802.3af(15.4W)

Automatically detect and supply power to IEEE802.3at and

IEEE802.3af compliant powered devices(PDs) Advanced SAFC function, only supply power to IEEE802.3af/at

compliant PDs, no worry about damaging other private standard

POE devices or devices without POE function Support port power supply prioritization, guarantee the

continuous power supply of key nodes

Up to 100m network cable transmitting distance Built-in PSE power supply module, plug-and play design

High security performance defending against power surge

Support short-circuit protection function Support simple WEB management

9.2 Gbps bandwidth, 8K MAC address table




POE Switches

ES5018-2GS-16POE


ES5018G-2GS-16POE is Full gigabit , managed, 18-

port Gigabit high power (IEEE 802.3at) PoE Switche,utilizing a

compact factor which can be mounted in a 19-inch rack with rack-mounting kits or placed on desktop.

With data and power supported by one unit, the ES5018G-2GS-16POE-300W-P(220VAC) shall reduce cables and eliminate the

need for dedicated electrical outlets on the wall,ceiling or any

unreachable place. Auto PoE detection and Plug and play installation makes ES5018G-2GS-16POE-300W-P(220VAC)

Gigabit PoE Switch easy to use and with clear LED indicators to

tell the working condition

Features Compatible with both IEEE802.3at(30W) and

IEEE802.3af(15.4W)

Automatically detect and supply power to IEEE802.3at and

IEEE802.3af compliant powered devices(PDs) Advanced SAFC function, only supply power to IEEE802.3af/at

compliant PDs, no worry about damaging other private standard

POE devices or devices without POE function Support port power supply prioritization, guarantee the

continuous power supply of key nodes

Up to 100m network cable transmitting distance Built-in PSE power supply module, plug-and play design, easy

to install

High security performance defending against power surge Support short-circuit protection function

Energy-saving green design, support auto-switch to standby

mode and auto-detect cable length Support simple WEB management

IEEE802.1w, Rapid Spanning Tree Protocol

10.8Gbps bandwidth, 16K MAC address table Input Voltage: 90~264VAC


Standard Model Gigabit(SFP) 10/100M(POE)

ES5018-2GS-16POE-150W - 4 45 90~264 VAC

ES5018—2GS-16POE-300W - 4 60


www.navigateworx.com [email protected]

Thank You


Date post:	18-Aug-2015
Category:	Documents
Upload:	frank-chen
View:	78 times
Download:	0 times

NavigateWorx_Product_Catalog_Ver1.01.01

Documents