NC Guide/NC Guide Pro FANUC INDIA Page 1 of 4 NCGuide/NCGuide Pro software Fanuc CNC simulation software which works on the PC and useful for the training the operators and maintenance engineers with out having the dedicated machine or controller The software enables selection of machine configurations depending on the requirement like lathe, machining center with horizontal / vertical type, even compound machine application. This software provides realistic simulation of CNC which can be used for the training of operators and maintenance engineers. Part program can be created tested and check for the errors and corrected with out any damage to the man and machine. Manual guide I enables conversational programming for the operators and 3D simulation of the finished component The software can be used as developmental tool for the designers to create customized screens and PMC offline simulation and testing. No need of dedicated hardware and now you can have the FS0i-D/FS30i system on the PC itself NCGuide: NCGuide Pro: NC simulation NC simulation Manual Guide I simulation Manual Guide I simulation For End users training PMC simulation Screen Development using • C language executer • FANUC Picture • Macro Executer
Transcript
NC Guide/NC Guide Pro FANUC INDIA
Page 1 of 4
NCGuide/NCGuide Pro software
Fanuc CNC simulation software which works on the PC and useful for the training
the operators and maintenance engineers with out having the dedicated machine or
controller
The software enables selection of machine configurations depending on the
requirement like lathe, machining center with horizontal / vertical type, even
compound machine application.
This software provides realistic simulation of CNC which can be used for the
training of operators and maintenance engineers. Part program can be created
tested and check for the errors and corrected with out any damage to the man and
machine. Manual guide I enables conversational programming for the operators
and 3D simulation of the finished component
The software can be used as developmental tool for the designers to create
customized screens and PMC offline simulation and testing. No need of dedicated
hardware and now you can have the FS0i-D/FS30i system on the PC itself
NCGuide: NCGuide Pro:
NC simulation NC simulation
Manual Guide I simulation Manual Guide I simulation
For End users training PMC simulation
Screen Development using
• C language executer
• FANUC Picture
• Macro Executer
NC Guide/NC Guide Pro FANUC INDIA
Page 2 of 4
NCGuide CNC Simulation for the programming training
Enables basic CNC screen displays for 30i/31i/32i and 0i-D
Enables how to operate the CNC
Creation and editing of Part Programs
Tool offset and work offset entering and edit
Running and testing of program for syntax errors
Entering and editing of Macro variables
Editing of parameters
Reviewing and clearing of messages and alarms
Manual Guide i simulation Creation of part programs for lathe, machining centre and compound machines
Tool Path graphic display
3D simulation display of finished component
Cycle time estimation with simulation of programs
Automatic conversion of conversational programs in to conventional G code
programs
NC Guide/NC Guide Pro FANUC INDIA
Page 3 of 4
NCGuide Pro for Maintenance training and Development
PMC Simulation for Trouble shooting:
NCguide Pro supports the maintenance training on the following
• Trouble shooting with the diagnostics pages
• Trouble shooting with operational and message history pages
• Trouble shooting with PMC I/O pages
• PMC ladder interface and display and online monitoring
• Practice using the FANUC FLADDER III and upload and download of
PMC program and display real time status
• Practice trouble shooting using the manual I/O panel or machine I/O signal
simulator
PMC Simulation for Development:
• Create and load the PMC program to the Simulators and debug
• Machine conditions can be simulated by using the machine I/O simulators
panel
• Use of online edit of CNC simulator to edit and modify the PMC program
• Use of the online ladder screen for the debugging and trace function for the
signal monitoring
• Forcing of signals is possible and check the sequence program flow in the
simulation
Customized Screen development and testing:
Customized screens developed using following software can be compiled, linked
and loaded to the CNC simulator and debugged
• C language Executer
• FANUC Picture
• Macro Executer
License for the NCGuide/NCGuide Pro: NCGuide/NCguide pro needs the license to operate and it comes with USB hard
lock key.
License is available in the form of
• Single User
• Multi user (10, 20, 30 users)
NC Guide/NC Guide Pro FANUC INDIA
Page 4 of 4
NCGuide Academic Package:
NCGuide Academic version is appropriate for the educational institutes and the
training centers for the training of CNC operators with basic functions.
The CNC Simulation function and MANUAL GUIDE I simulation function can
be used with this package.
The package is available with Class room and Homework version
1) Class Room Package:
The class room session with NCGuide simulation on the Multi PC network
on connected to server through LAN
a. 1 Network license key
b. License key connected with network server
c. NCGuide can be used by PC which connected to server through
LAN
d. NCGuide can be used by maximum of 16 user at a time in the LAN
e. No expiration for the license
2) Home Work Package:
The NCGuide can be used on the PC which not connected to server in the
class room and also the students can use it for the study at home
a. 1 license key for individual PC
b. The license will expire in one year
c. Suitable to distribute the license for new students every year
Specification:
The machine composition that can be set and an executable NC program is
as follows
Restrictions:
The following functions are not available with Academic Package
