600mm
700mm
SIDE
Locking Points
Ned Kelly'" "
Zinc finish Black powder coat finish
Features
• Each rail provides storage for a single bike
• Suits bikes with full length mud guards
• Available in Zinc finish or Black powder coat over mild steel
• Provides the ability to lock the main frame and one wheel
• Support prongs with protective coating prevent damage to rim
• Can be used with custom framing - no wall needed
Dimensions
FRONT
Specifications Material options
- Zinc finish
- Black powder coat over mild steel
- Stainless steel - Pre-order only
Fixing options
- Bolt on to wall
- Fixed to support framing
Recommended fasteners - wall
- Dynabolts (M8 x 40mm)
- Shear Nut security fasteners
Recommended fasteners - framing
- Bolt and nut (M10 x 60mm)
- Tek screws
Dimensions
125mm [w] x 700mm [h] x 600mm [d]
V41 -1/05/2017 I Specification may be subject to change without notice. ©Bicycle Network
w BIKE BICYCLE PARKING NE W
DESIGN. SUPPLY. INSTALL. Bicycle Network ABN 41 026 835 903
p. 1300 727 563 e. parking®bicyclenetwork.comau blkeparking.com.au
VIC Level 4, 246 Bourke Street, Melbourne VIC 3000 NSW 234 Crown Street, Darlinghurst NSW 2010
TAS 210 Collins Street, Hobart TAS 7000 NT Suite 5.18-20 Cavenagh Street, Darwin 0800
390mm spacing. For less Men 7 Ned Keay bke racks,
cut down honzcotals by 390mm per mck Option 1:
390mm
Fitting 4 Ned Kellys to a wall
Tyrics Boyce Length
Option 2: 2810mm
Fitting 7 Ned Kellys to a Duragal steel frame
Fixing options
Fix to a wall using 4x fasteners or Shear Nuts
Shown with M8 x 40mm fastener
Shown with M8 x 40mm Shear Nuts
Fix to a frame using 4x bolts or Tek Screws
Min \\\\\ \1111,%
Shown with M10 x 60mm Bolt, Washer & Nut
Shown with Tek Screw
Layout guidelines 400rnm minimum lwa. to camel
400mm minimum fame to camel
V41 - 1/05/2017 ' Specification may be subject to change without notice. ©Bicycle Network
v BIKE BICYCLE PARKING NETWORK`
DESIGN. SUPPLY. INSTALL. Bicycle Network ABN 41 026 835 903
p 1300 727 563 e. [email protected] blkeparking.com.au
VIC Level 4, 246 Bourke Street, Melbourne VIC 3000 NSW 234 Crown Street, Darlinghurst NSW 2010
TAS 210 Collins Street, Hobart TAS 7000 NT Suite 5,18-20 Cavenagh Street, Darwin 0800
600mm
700mm
SIDE
Locking Points
•
Ned Kelly'"
Zinc finish
Black powder coat finish
Features
• Each rail provides storage for a single bike
• Suits bikes with full length mud guards
• Available in Zinc finish or Black powder coat over mild steel
• Provides the ability to lock the main frame and one wheel
• Support prongs with protective coating prevent damage to rim
• Can be used with custom framing - no wall needed
Dimensions
FRONT
Specifications Material options
- Zinc finish
- Black powder coat over mild steel
- Stainless steel - Pre-order only
Fixing options
- Bolt on to wall
- Fixed to support framing
Recommended fasteners - wall
- Dynabolts (M8 x 40mm)
- Shear Nut security fasteners
Recommended fasteners - framing
- Bolt and nut (M10 x 60mm)
- Tek screws
Dimensions
125mm [w] x 700mm [h] x 600mm [d]
V4.1 -1/05/2017 I Specification may be subject to change without notice. ()Bicycle Network
v BIKE BICYCLE PARKING NETWORK'
DESIGN. SUPPLY. INSTALL. Bicycle Network ABN 41 026 835 903
p. 1300 727 563 e. [email protected] blkeparkIng.com.au
VIC Level 4, 246 Bourke Street, Melbourne VIC 3000 NSW 234 Crown Street, Darlinghurst NSW 2010
TAS 210 Collins Street, Hobart TAS 7000 NT Suite 5,18-20 Cavenagh Street, Darwin 0800
Shown with M10 x 60mm Bolt, Washer & Nut Shown with Tek Screw
400mrn mirarnum [web cote)
400mn minimum icenes to mans)
Layout guidelines
390mm spacing. For less than 7 Ned Keay tyke rad.,
as down horizontals by 393rnm per rack
390mm lame le camel
',you, Bevels Length
Option 2: 2810mrn
Fitting 7 Ned Kellys to a Duragal steel frame
Option 1:
Fitting 4 Ned Kellys to a wall
V41 - 1/05/2017 I Specification may be subject to change without notice. @Bicycle Network
► Fixing options
Fix to a wall using 4x fasteners or Shear Nuts
Shown with M8 x 40mm fastener
Shown with M8 x 40mm Shear Nuts
Fix to a frame using 4x bolts or Tek Screws
V BICYCLE NE'WORK'
BIKE PARKING
DESIGN. SUPPLY. INSTALL. Bicycle Network ABN 41 026 835 903
p. 1300 727 563 e. [email protected] bikeparking.com.au
VIC Level 4, 246 Bourke Street, Melbourne VIC 3000 NSW 234 Crown Street, Darlinghurst NSW 2010
TAS 210 Collins Street, Hobart TAS 7000 NT Suite 5,18-20 Cavenagh Street, Darwin 0800
600mm
700mm
SIDE
Locking Points
Ned Kelly TM cL,--y
Zinc finish
Black powder coat finish
Features
• Each rail provides storage for a single bike
• Suits bikes with full length mud guards
• Available in Zinc finish or Black powder coat over mild steel
• Provides the ability to lock the main frame and one wheel
• Support prongs with protective coating prevent damage to rim
• Can be used with custom framing - no wall needed
Dimensions
FRONT
Specifications Material options
- Zinc finish
- Black powder coat over mild steel
- Stainless steel - Pre-order only
Fixing options
- Bolt on to wall
- Fixed to support framing
Recommended fasteners - wall
- Dynabolts (M8 x 40mm)
- Shear Nut security fasteners
Recommended fasteners - framing
- Bolt and nut (M10 x 60mm)
- Tek screws
Dimensions
125mm [w] x 700mm [h] x 600mm [d]
V41 -1/05/2017 I Specification may be subject to change without notice °Bicycle Network
v BIKE BICYCLE PARKING TWO St
DESIGN. SUPPLY. INSTALL. Bicycle Network ABN 41 026 835 903 p. 1300 727 563 e. [email protected] blkeparklng.com.au VIC Level 4, 246 Bourke Street, Melbourne VIC 3000 NSW 234 Crown Street, Darlinghurst NSW 2010 TAS 210 Collins Street, Hobart TAS 7000 NT Suite 5,18-20 Cavenagh Street, Darwin 0800
390mrn spacing Fm less than 7 Ned Kelly bke racks,
cut down honzcertals by 390mm per rack
'Woo Boyce Lenart
Option 2: 2810arn
Fitting 7 Ned Kellys to a Duragal steel frame
Option 1:
Fitting 4 Ned Kellys to a wall
Fixing options
Fix to a wall using 4x fasteners or Shear Nuts
Shown with M8 x 40mm fastener
Shown with M8 x 40mm Shear Nuts
Fix to a frame using 4x bolts or Tek Screws
I \\\\\\\,\\„,,,,
Shown with M10 x 60mm Bolt, Washer & Nut
Shown with Tek Screw
Layout guidelines enamel minimum 1.we to colt*
400Tren minimum (case to owe.
V4.1 -1/05/2017 I Specification may be subject to change without notice. ©Bicycle Network
v BIKE BICYCLE PARKING NE WORK•
DESIGN. SUPPLY. INSTALL. Bicycle Network ABN 41 026 835 903
p 1300 727 563 e. [email protected] bikeparking.com.au
VIC Level 4, 246 Bourke Street, Melbourne VIC 3000 NSW 234 Crown Street, Darlinghurst NSW 2010
TAS 210 Collins Street, Hobart TAS 7000 NT Suite 5,18-20 Cavenagh Street, Darwin 0800
FRONT
600mm
700mm
SIDE
Ned Kelly TM
Immo
Black powder coat finish
Features
• Each rail provides storage for a single bike
• Suits bikes with full length mud guards
• Available in Zinc finish or Black powder coat over mild steel
• Provides the ability to lock the main frame and one wheel
• Support prongs with protective coating prevent damage to rim
• Can be used with custom framing - no wall needed
Dimensions
Specifications Material options
- Zinc finish
- Black powder coat over mild steel
- Stainless steel - Pre-order only
Fixing options
- Bolt on to wall
- Fixed to support framing
Recommended fasteners - wall
- Dynabolts (M8 x 40mm)
- Shear Nut security fasteners
Recommended fasteners - framing
- Bolt and nut (M10 x 60mm)
- Tek screws
Dimensions
125mm [w] x 700mm [h] x 600mm [d]
Locking Points
V4.1 - 1/05/2017 I Specification may be subject to change without notice. COBicycle Network
v BIKE BICYCLE PARKING W
DESIGN. SUPPLY. INSTALL. Bicycle Network ABN 41 026 835 903
p. 1300 727 563 e. [email protected] blkeparking.com.au
VIC Level 4, 246 Bourke Street, Melbourne VIC 3000 NSW 234 Crown Street, Darlinghurst NSW 2010
TAS 210 Collins Street, Hobart TAS 7000 NT Suite 5,18-20 Cavenagh Street, Darwin 0800
390mm spacing. For Yea then 7 Ned Key eke racks,
art down now:etas by 39(171M per rack
39Ornm lumen, wed
Shown with M10 x 60mm Bolt, Washer & Nut Shown with Tek Screw
4c01-nn minimum Palm onwl
400rnm mrxrnurn *wan loco** Layout guidelines
Option 2: 281Ornm law Beide Leryth
Fitting 7 Ned Kellys to a Duragal steel frame
V41 - 1/05/2017 I Specification may be subject to change without notice. @Bicycle Network
Option 1:
Fitting 4 Ned Kellys to a wall
Fixing options
Fix to a wall using 4x fasteners or Shear Nuts
Shown with M8 x 40mm fastener Shown with M8 x 40mm Shear Nuts
Fix to a frame using 4x bolts or Tek Screws
v BIKE BICYCLE PARKING NETWORK'
DESIGN. SUPPLY. INSTALL. Bicycle Network ABN 41 026 835 903
p 1300 727 563 e. [email protected] blkeparkIng.com.au
VIC Level 4, 246 Bourke Street, Melbourne VIC 3000 NSW 234 Crown Street, Darlinghurst NSW 2010
TAS 210 Collins Street, Hobart TAS 7000 NT Suite 5,18-20 Cavenagh Street, Darwin 0800
750mrr 750mm
200mm Concrete footing Welded base plate
900mm 900mm
•
Flat Top`"
Galvanised finish/Stainless Steel finish
Features
Dimensions
• Each rail supports two adult bikes in an upright position
• Can be either bolted to a concrete slab or concreted in situ
• Available in stainless steel or galvanised steel
• Provides the ability to lock both wheels and frame
• Suitable for interior and exterior use
Specifications Material options
- Galvanised (Duragal)
- 316 Marine grade stainless steel
Fixing options
- Welded flange - Bolt on
- In situ
Recommended fasteners
- Galvanised Dynabolts (M10 x 65mm)
- Stainless Dynabolts (M10 x 65mm)
- Shear Nut security fasteners
Dimensions
950mm [w] x 750mm [h]
Locking Points
V4.1 - 1/05/2017 I Specification may be subject to change without notice. ggicycle Network
IF BIKE PARKING
DESIGN. SUPPLY. INSTALL. Bicycle Network ABN 41 026 835 903
p. 1300 727 563 e. [email protected] bikeparking.com.au
VIC Level 4, 246 Bourke Street, Melbourne VIC 3000 NSW 234 Crown Street, Darlinghurst NSW 2010
TAS 210 Collins Street, Hobart TAS 7000 NT Suite 5, 18-20 Cavenagh Street, Darwin 0800
BICYCLE NETWORK'
Welded flange (Bolt on) using 4 (total) x fasteners In situ (Concrete footing)
Shown with M10 x 65mm fastener
Welded flange (Security heads) using 4 (total) x fasteners
Shown with M10 x 65mm Shear Nuts
Layout guidelines
1 OCOrnm On. tO =NM
Option 2:
Footing Width 1200mm Angle 45°
iyoica Bicycle Length
1700mm
Option 1:
Footing Width 1700mm Angle 0°
V4.1 -1/05/2017 I Specification may be subject to change without notice. ©Bicycle Network
120mm
290mm
100mm
•
Fixing options
v BIKE BICYCLE PARKING NETWORK'
DESIGN. SUPPLY. INSTALL. Bicycle Network ABN 41 026 835 903
p. 1300 727 563 e. [email protected] bikeparking.com.au
VIC Level 4, 246 Bourke Street, Melbourne VIC 3000 NSW 234 Crown Street, Darlinghurst NSW 2010
TAS 210 Collins Street, Hobart TAS 7000 NT Suite 5,18-20 Cavenagh Street, Darwin 0800
700mm
SIDE FRONT
• Each rail provides storage for a single bike
600mm
Locking Points
Ned KellyTm
Zinc finish
Black powder coat finish
Features Dimensions
• Suits bikes with full length mud guards
• Available in Zinc finish or Black powder coat over mild steel
• Provides the ability to lock the main frame and one wheel
• Support prongs with protective coating prevent damage to rim
• Can be used with custom framing - no wall needed
Specifications Material options
- Zinc finish
- Black powder coat over mild steel
- Stainless steel - Pre-order only
Fixing options
- Bolt on to wall
- Fixed to support framing
Recommended fasteners - wall
- Dynabolts (M8 x 40mm)
- Shear Nut security fasteners
Recommended fasteners - framing
- Bolt and nut (M10 x 60mm)
- Tek screws
Dimensions
125mm [w] x 700mm [h] x 600mm [d]
V41-1/05/20171 Specification may be subject to change without notice. ()Bicycle Network
BIKE
DESIGN. SUPPLY. INSTALL. Bicycle Network ABN 41 026 835 903
p. 1300 727 563 e. [email protected] blkeparkIng.com.au
VIC Level 4, 246 Bourke Street, Melbourne VIC 3000 NSW 234 Crown Street, Darlinghurst NSW 2010
TAS 210 Collins Street, Hobart TAS 7000 NT Suite 5,18-20 Cavenagh Street, Darwin 0800
BICYCLE NE TWOIK' PARKING
39(Amm spacing. For
we than 7 Ned key b■ke racks,
cut doer/ houontals by 390mm per rack
39Ornm [canoe to ant*
Fitting 7 Ned Kellys to a Duragal steel frame
Shown with M10 x 60mm Bolt, Washer & Nut Shown with Tek Screw
400mm minimum 1.010 come]
400mm minimum (cam,e to cams] Layout guidelines
rYn'ca, Ocroa Limon
Option 2: 2810rnm
11 ilk\\\\"\\\ \\P
Option 1:
Fitting 4 Ned Kellys to a wall
•
Fixing options
Fix to a wall using 4x fasteners or Shear Nuts
Shown with MB x 40mm fastener
Shown with M8 x 40mm Shear Nuts
Fix to a frame using 4x bolts or Tek Screws
V41 - 1/05/2017 i Specification may be subject to change without notice. @Bicycle Network
v BIKE BICYCLE PARKING NETWORK'
DESIGN. SUPPLY. INSTALL. Bicycle Network ABN 41 026 835 903
p. 1300 727 563 e. [email protected] blkeparkIng.com.au
VIC Level 4, 246 Bourke Street, Melbourne VIC 3000 NSW 234 Crown Street, Darlinghurst NSW 2010
TAS 210 Collins Street, Hobart TAS 7000 NT Suite 5,18-20 Cavenagh Street, Darwin 0800