NetComm Wireless 4-Port FTTdp Unit (NDD-4100)Designed to provide a fast and cost-effective alternative to Fibre to the Premises (FTTP)

deployments, the NetComm Wireless 4-Port FTTdp Unit (NDD-4100) takes a fibre

connection, and redistributes it to the home using existing copper lines. Developed to link

up to 4 copper lines to a single NDD-4100 Fibre DPU, the unit offers a new approach to

Fibre to the Node (FTTN) scenarios to enhance broadband speeds and capacity.

NetCommWireless

NDD-4100-01Specification Sheet

WHAT IS FTTDP?FTTdp, or Fibre to the Distribution Point, is ideal for the deployment of fibre to a distribution point located less than 200 meters from the customer premises. Broadband access is converted from a GPON signal to VDSL2 using the NetComm Wireless NDD-4100 unit, and relayed to the house using the existing copper infrastructure.

QUICK AND COST EFFECTIVE ROLLOUTRequiring less civil work than FTTH and less power infrastructure than FTTN/FTTB, the NetComm Wireless NDD-4100 allows network providers to speed up the rollout project and gain a competitive edge in a market with ever increasing bandwidth demand.

ENHANCED BROADBAND SERVICEWhen compared to FTTN, the NetComm Wireless Fibre DPU offers much higher access speeds due to the significantly shorter copper lead employed.

REVERSE POWEREDAvoid the high cost of lead-in installation associated with FTTH scenarios using FTTdp. Unlike FTTN/FTTB installations, the NetComm Wireless FTTdp unit does not require the installation of a dedicated power supply at the node. The solution is designed to be reverse powered by the Reverse Power Feed Unit (RPF) installed at the end-user premises, thereby lowering the cost of the network rollout even further.

BROADBAND SERVICE FLEXIBILITY - POTS PASS-THROUGH Automatic migration of existing legacy data and voice services to new broadband services through the simple connection of the Reverse Power Feed Unit (NDD-0100) in the premise. Automatically reverse to legacy services and restore the connection to the exchange by simply disconnecting it, so there is no need for a technician visit.

ADVANCED REMOTE MANAGEMENTThe NDD-4100 offers full remote device management employing international protocol standards to enable network operations to configure, monitor and troubleshoot the device at any time using existing element management systems.

PERFECT FOR:• Wholesale network providers and

carriers to roll out fast and cost effective fibre deployments, leveraging fibre network installations and existing copper infrastructure.

• Alternative approach to Fibre to the Premises (FTTP), cutting installation costs with improved time to market and performance. No need to visit the premise – the installation is done outside of the premises.

• FTTdp deployments ranging from 1 to 4 copper extensions, and linked to a single NDD-4100 Fibre DPU

• Alternative approach to Fibre to the Node scenario. The optical fibre node is moved closer to the user’s premises for an enhanced network experience over copper, significantly increasing broadband speeds.

KEY FEATURES • 4 x VDSL2 (ITU G.993.2) ports

• 1 x GPON (ITU G.984) port

• Robust - specifically designed for underground pit and pole mount as well as wall installations

• Passive cooling design with a wide temperature range of -20oC to +70oC

• IP68 rated, industrial grade product that can be submerged in a pit (up to 1 meter) for one month

• Smart POTS pass-through solution

• Installation tool and accessories for an easy, quick and reliable installation.

NetComm Wireless 4-Port FTTdp Unit (NDD-4100) OverviewBroadband network providers must balance the need to quickly introduce superfast services with the high cost of installing end-to-end optic fibre networks between local exchanges and the customer premises. The innovative NetComm Wireless Fibre DPU (NDD-4100) has been engineered to minimise the time and expense involved in delivering Fibre to the Premises (FTTP). The robust NDD-4100 provides a fibre to copper extension to deliver superfast broadband to premises already serviced by copper lines. Specifically designed to be installed in sunken Distribution Point (DPs) pits, or wall or pole mounted, the NDD-4100 brings the optical fibre node closer to the premises to enable world class broadband speeds and performance over copper.

NetComm Wireless Reverse Power Feed Unit (NDD-0100-01)

• Installed at the customer premises

• Powers the Fibre DPU

• Avoids power supply installation at the distribution point

• Employing industry standards

Reverse Power Feed Unit (NDD-0100-01)

AC powerpoint

End User Premises

FTTdp Unit(NDD-4100-01)

Distribution Point

VDSL2 GPON Network

Fibre to the Distribution Point

CPE

Application ExampleFibre to the Distribution Point

Device FeaturesAt a glance

• 1 x GPON (G.984) Interface

• 4 x VDSL2 (G.993.2) Interfaces

1

2

1

2 2 2 2

Accessories

Pole mount kit

Wall mount kit

Patch cablesCopper cable joint enclosure

Gel-filled crimpable connectors

CONNECTIVITY • 1 x GPON (ITU G.984) port - 510(+20mm) Fibre Lead

terminated with Optitap 1f Female connector • 4 x VDSL2 (ITU G.993.2) ports - 1200(+20mm) Copper Lead

SUPPORTED STANDARDS • IEEE 802.1Q VLANs • IEEE 802.1Q Class of Service (“802.1p”) • IEEE 802.1ad (Stacked VLANs) • IEEE 802.1ag • ITU Y.1731 (Fault Management and Performance Monitoring) • ITU G.993.2 • ITU G.984 GPON • ITU G.988 OMCI • ITU G.9700 & G.9701 • Broadband Forum TR-156/TR-247/TR-255

ENVIRONMENTAL PERFORMANCE • Operating temperature range: -20°C to +70°C • IP68 rated housing • Passively cooled • Maintenance free design

POWER SUPPLY • Powered by NDD-0100 • AC power supply to NDD-0100

DIMENSIONS • 222.2mm (L) x 169.3mm (W) x 66mm (D)

Technical Specifications

Trademarks and registered trademarks are the property of NetComm Wireless Limited or their respective owners. Specifications are subject to change without notice. Images shown may vary slightly from the actual product.

NETCOMM WIRELESS LIMITED HEAD OFFICE 18-20 Orion Road, Lane Cove, NSW 2066, Sydney, Australia ABN 85 002 490 486

NetCommWireless

ND

D-4

100-

01_R

ev 1