+ All Categories
Home > Documents > NetPoint Pro CPE – AP

NetPoint Pro CPE – AP

Date post: 11-Jan-2016
Category:
Upload: esme
View: 74 times
Download: 0 times
Share this document with a friend
Description:
NetPoint Pro CPE – AP. Full indoor coverage with NPP CPE - AP. 2. A new approach for indoor coverage: NPP CPE-AP Place by the window Pick up the Wi-Fi signal from the outdoor Retransmit it indoors High power Wi-Fi radio: Tx power - 25dbm (for indoor and outdoor) - PowerPoint PPT Presentation
Popular Tags:
7
NetPoint Pro CPE – AP NetPoint Pro CPE – AP
Transcript
Page 1: NetPoint Pro CPE – AP

NetPoint Pro CPE – APNetPoint Pro CPE – AP

Page 2: NetPoint Pro CPE – AP

2 Full indoor coverage with NPP CPE - AP

WCPE-24DZ-SR

A new approach for indoor coverage: NPP CPE-AP• Place by the window• Pick up the Wi-Fi signal from the outdoor• Retransmit it indoors

High power Wi-Fi radio:• Tx power - 25dbm (for indoor and outdoor)• Similar range as with the USB CPE (WCPE-24HP-USB)

Kit will include:• Window mount• 5dbi antenna• Optional PoE adaptor

Page 3: NetPoint Pro CPE – AP

3 NPP CPE-AP Use cases (1)

Most basic use case: NPP CPE-AP as bridge• Still two virtual Wi-Fi interfaces on the CPE-AP• The CPE-AP acts as a “bump in the wire”• All user’s MAC addresses are visible to the operator

• Sometimes required by the regulator

• Provides control to the operator on the service usage

Page 4: NetPoint Pro CPE – AP

4 NPP CPE-AP Use cases (2)

Case 2: CPE-AP in Router mode• NAT and firewall function between indoor and outdoor SSIDs• Router can hide multiple users behind it

• Hiding their MAC addresses from the metro network

• NPP CPE-AP can perform 8021.x Radius authentication

Page 5: NetPoint Pro CPE – AP

5 Wire Line Option

Wire line connectivity is also available for both modes:• Router and bridge mode

Has advantage over USB based CPE:• Doesn’t require a driver

• No compatibility issues with end user’s PC

• No profile definition issues with end user’s PC

• Can be connected with longer cables • USB cable length is limited to 5-12meters

Page 6: NetPoint Pro CPE – AP

6 Considerations with CPE-AP

The CPE-AP has some limitations

The usage of a single frequency repeater halves the capacity of the base station• It is strongly recommended not to allow wireless LAN traffic

in the end user’s side• Will eat up the base station capacity

• By default, the CPE-AP blocks wireless LAN traffic on the LAN side.

Internet

Default Gateway:89.83.101.1

SSID : Home_ Wi-Fi_JohnSecurity: WEP

User's IP address:192.168.1.5

SSID : Metro_ Wi-Fi_AT&TSecurity: WPA2, 8021.x

Internet

Default Gateway:89.83.101.1

SSID : Home_ Wi-Fi_JohnSecurity: WEP

User's IP address:89.83.101.53

SSID : Metro_ Wi-Fi_AT&TSecurity: WPA2, 8021.x

SSID : Metro_ Wi-Fi_AT&TSecurity: WPA2, 8021.x

Page 7: NetPoint Pro CPE – AP

Thank youThank you

www.netronics-networks.comwww.netronics-networks.com


Recommended