never out of its element >>
O T T E R B O X F U L L L I N E C ATA L O G 2 0 0 6
catalog.qxp 3/26/2006 10:39 AM Page 1
4
20
28
34
38
TA B L E O F C O N T E N T S > >O T T E R B O X H I S T O R Y > > W A R R A N T Y > >
Otter Products, LLC. products comewith an Unconditional LifetimeWarranty. Warranty includes replace-ment of the case only. Otter Productscannot be held liable for damage topersonal property due to misuse orimproper care and maintenance ofcase and o-ring seals. Otter Products'warranty does not, under any circum-stance, cover the replacement or costof any electronic device or personalproperty inside or outside of the case.
If you have any questions regardingthe warranty, call us at:
(888) 695-8820
or email us at:
Make sure that your case stays watertight: On all Otter Products always keepthe main gray gaskets clean and freefrom sand, dust, dirt or other contami-nants.Contamination can lead to the leakingof the case, damage to the sealingsurfaces, and make any warranty nulland void.Cleaning Care: Clean main gray gasketusing a cotton swab to remove anysand, dirt, dust or other contaminants.
CARE & MAINTENANCE>>
Founded in 1996, Otter Products, LLC. combines customer feed-back, experience and creativity to produce the most rugged caseson the planet…
Curt Richardson, CEO of Otter Products, focuses on providinginnovative solutions for everyday life. With three decades experiencein manufacturing, Richardson demonstrates the importance of lead-ership, honesty and hard work. Listening to needs and quicklyadapting to changing markets has proven a successful tactic.
Built upon the concept of a “box-like,” rugged case for storing valuables, the OtterBox is an ideal solution for any adventure—hiking, biking, diving, camping, fishing, hunting, boating, kayaking,traveling, swimming and more.
OtterBox works with companies such as Apple, HP™ and Fujitsu™to provide optimal protection solutions for iPods, PDAs and PCs,expanding into the exciting world of technology to offer un-surpassed waterproof, drop resistant cases.
Branching into other markets, Otter Products offers the Cigar Caddy a travel humidor for cigar enthusiasts as well as the Zippo CargoCase, the only Department of Transportation approved carrying casefor Zippo lighters aboard airplanes.
The company’s desire to experiment with new ideas gives customers a dynamic product selection. Additionally, a 100%quality guarantee emphasizes a commitment to customer satisfac-tion.
As an industry leader, Otter Products takes the idea of a “protective case” to the next level. With product lines that complimentemerging technologies and protect valuables, customers can findthe ideal solution to fit their needs.
PDA CASES >>
OTTERBOX 1900
OTTERBOX 1910
OTTERBOX 2600
OTTERBOX 3600
PC CASES >>
OTTERBOX 4600
OTTERBOX 7040
OTTERBOX 7030
OTTERBOX 7020
OTTERBOX FOR iPOD CASES>>
OTTERBOX for
20 GB, 30/40/60 GB, photo, video, mini
OTTERBOX for iPOD nano
OTTERBOX for iPOD shuffle
OTTERBOXES>>
1000
2000/2500
3000/3250/3500
8000/9000
CIGAR CADDY'S & ACCESSORIES>>
3140
3400
3240
3540
ZIPPO CARGO CASE by OTTERBOX
catalog.qxp 3/26/2006 10:40 AM Page 3
O T T E R B O X 1 9 0 0 > > compact, expandable PDA protection>>
4
PD
A C
AS
ES
:O
TT
ER
BO
X 1
90
0>
>
5
■ OtterBox’s waterproof, crushproof, drop-proof design economically ruggedizes your PDA and protects your valuable data.
■ In designing the 1900 case, OtterBox captured the best of our PDA product experience and customer feedback.
■ OtterBox integrated strength, flexibility, and style without compromising features, size or quality,making the 1900 the most versatile and rugged PDA case available.
■ Compact design for maximum versatility.
■ Access to screen through a fully waterproof, interactive membrane.
■ The most durable and protective PDA case available.
■ $99.95 MSRP
OtterBox 1900:Black w/Yellow Trim$99.95 MSRP
OtterBox 1900:Black $99.95 MSRP
catalog.qxp 3/26/2006 10:41 AM Page 5
FEATURES■ Universal fit to most popular PDA's■ Waterproof and dustproof while in use■ Many accessories available to allow use of
GPS, barcode readers, RFID readers, etc.■ Replaceable screen membrane protects the
PDA touchscreen from scratches while provid-ing easy access to front panel buttons
■ Impact resistant, flip-up screen cover■ Adjustable neoprene handstrap■ Clear top pod for IR usability■ Easy open Pod system for access to CF and
SD slots■ Removable plug for headphone/headset
access■ Sealed bottom hatch provides access to PDA's
sync and charge connectors■ Gore™ membrane vent for heat and pressure
dissipation■ External stylus holder■ Compound latches for easy opening and
secure closing of the case■ Glass reinforced Polycarbonate shell for maxi-
mum strength and durability■ Thermoplastic rubber overmolding for high grip
and impact absorption
ENVIRONMENTAL PROTECTIONDrop and Shock■ MIL-STD 810F, Method 516.5, Procedure 4
(Four foot drop to concrete, all surfaces, edges and corners)
Water Protection■ MIL-STD 810F, Method 512.4, Procedure 1,
Immersion■ IP67 rating for water and dust intrusion. Water
testing per IEC 60529 Edition 2.1, Temporary Immersion (30 minute immersion at 1 meter depth)
Dust Intrusion■ MIL-STD 810F, Method 510.4, Procedure 1
(Blowing Dust)■ IP67 rating for water and dust intrusion. Dust
testing per IEC 60529 Edition 2.1, Section 13.4 (Blowing Dust)
ADDITIONAL INFORMATIONOptional Accessories■ Belt Clip - heavy duty, full size belt clip for all
day use■ Vehicle Mount - allows for secure vehicle
mounting while still allowing the case to be easily removed from mount
■ Neck Lanyard - provides a comfortable solution for using and carrying your PDA
■ Serial Pod - Provides an RS232 and 4mm power connection. Works well with external GPS, data-gathering devices, or temperature probes.
■ Medium Pod- Allows for the use of CF and SD barcode readers, GPS, and other medium sized accessories. Available with and without scan window
■ Large Pod - allows for the use of large CF,SD, or other top mounted accessories
■ Cable Pass Through Kit - Allows for multiple sizesof cables, power, sync, GPS, printers etc. to passthrough the case and connect to your PDA.
■ Screen Replacement Kit - allows for the replacement of the screen membrane
■ Custom screen kits - allows for easier use of PDA's with raised front panel buttons. (See website for details.)
Dimensions (Case only)■ 6.5" L x 4.5" W in x 2.2" D
(165 mm x 114 mm x 56 mm)Weight (Case only)■ 0.7 lb (0.32 kg)
HeadphoneandHeadsetAccess
InterchangeablePOD System
●
ExternalStylusHolder
●
Flip-upProtectiveScreenCover
●
●
Easy Access to Sync andChargeConnections
FlexibleFully-sealedReplaceableScreenMembrane
Rubber Over-molding for Optimum Grip in AllWeatherConditions
●
Easy-openLatchSystem
●●
●
AdjustableNeoprene Handstrap
Gore™ Membrane Vent
Clear Top POD forIR Usability AlsoOpens for EasyAccess to SD andCF Slots
● ●
Headphone Plug
●
●
PD
A C
AS
ES
:O
TT
ER
BO
X 1
90
0>
>D E TA I L S > > A C C E S S O R I E S > > T E C H N I C A L D ATA > >
76
Belt Clip$19.95 MSRP
Vehicle Mount Kit$24.95 MSRP
Other mount options available:www.otterbox.com
Neck Lanyard Kit $29.95 MSRP
Serial POD$49.95 MSRP
Medium PODScannerWith Window $39.95 MSRPWithout Window$34.95
Tall GPS POD$34.95
Cable PassThrough Kit $39.95 MSRP
Keypadcall for price
Magnetic StripReadercall for price
catalog.qxp 3/26/2006 10:42 AM Page 7
O T T E R B O X 1 9 1 0 > > rugged protection for iPaq 6500>>
8
PD
A C
AS
ES
:O
TT
ER
BO
X 1
91
0>
>
9
Action Shot Goes Here! ■ OtterBox’s waterproof, crushproof, drop-proof design economically ruggedizes an HP iPaq 6500 and protects your valuable data.
■ Great for customers and any industry requiring the user to take their iPaq 6500 into harsh conditions.
■ OtterBox 1910 Case integrates strength, flexibility, and style without compromising features, size or quality.
■ Compact design for maximum versatility.
■ Access to screen through a fully waterproof, interactive membrane.
■ The most durable and protective iPaq 6500 case available.
■ $129.95 MSRP
OtterBox 1910:Black w/Yellow Trim$129.95 MSRP
OtterBox 1910:Black $129.95 MSRP
catalog.qxp 3/26/2006 10:42 AM Page 9
ExternalStylusHolder
Easy-openCompoundLatches
Clear lens forusability of cameraand flash throughthe case
Raised, deep back allows use ofextended battery orstandard battery
Durable hingeensures sealedclosure
●
●
●
●
●
●
PD
A C
AS
ES
:O
TT
ER
BO
X 1
91
0>
>T E C H N I C A L D ATA > >
1110
FEATURES■ Custom fit to HP iPaq 6500■ Case has integrated keyboard for use of all iPaq
keyboard functions■ Waterproof and dustproof while in-use■ Accessory POD available to allow use of SD
barcode readers■ Replaceable screen membrane protects the
iPaq 6500 touchscreen from scratches while providing easy access to the screen
■ GPS, Bluetooth and cell phone reception fullyoperational through the case with no interferencein transmission or signal
■ Removable plug for headphone/headset access■ Sealed bottom hatch provides access to iPaq
sync and charge connectors■ Gore™ membrane vent for heat and pressure
dissipation and speaker and microphone usability■ External stylus holder■ Compound latches for easy opening and secure
closing of the case■ Glass reinforced Polycarbonate shell for maximum
strength and durability■ Thermoplastic rubber overmolding for high grip
and impact absorption
ENVIRONMENTAL PROTECTIONDrop and Shock■ MIL-STD 810F, Method 516.5, Procedure 4
(Four foot drop to concrete, all surfaces, edges and corners)
Water Protection■ MIL-STD 810F, Method 512.4, Procedure 1, Immersion■ IP67 rating for water and dust intrusion. Water testing
per IEC 60529 Edition 2.1, Temporary Immersion (30 minute immersion at 1 meter depth)
Dust Intrusion■ MIL-STD 810F, Method 510.4, Procedure 1
(Blowing Dust)■ IP67 rating for water and dust intrusion. Dust testing
per IEC 60529 Edition 2.1, Section 13.4 (Blowing Dust)ADDITIONAL INFORMATIONOptional Accessories■ Belt Clip Holster - heavy duty, full size belt clip for
all day use■ Screen Replacement Kit - allows for the replacement
of the screen membrane■ Accessory PODS available for protecting SD Barcode
Scanners and Peripherals Dimensions Dimensions (Case Only)■ 5.7" L x 3.7" W in x 1.6" D
(144.8 mm x 93.9 mm x 406 mm)Weight (Case only)■ 0.6 lbs. (.27 kg)
Headphone andHeadset Access
Gore™ Water-resistant Ventfor PhoneSpeaker
●
Waterproof keyboardbuttons activate iPaqdata entry keys
Easy Access to Sync and ChargeConnections & Reset Buttons
FlexibleFully-sealedReplaceable ScreenMembrane
Rubber Over- molding for Optimum Grip in any WeatherConditions
Easy-access to SDCard Slot
Accessory PODSavailable for pro-tecting SD BarcodeScanners andPeripherals
●
Gore Water-resistant Vent for PhoneMicrophone
●
●
●
●
●
●
D E TA I L S > > A C C E S S O R I E S > >
SD POD Kit$29.95 MSRP
catalog.qxp 3/26/2006 10:43 AM Page 11
O T T E R B O X 2 6 0 0 > > compact PDA protection>>P
DA
CA
SE
S:
OT
TE
RB
OX
26
00
>>
1312
OtterBox 2600:Yellow$49.95 MSRP
OtterBox 2600:Black $49.95 MSRP
■ Enter or retrieve date with your stylus even while your PDA is in the case through a recessed, clear plastic screen.
■ Rugged, indestructible ABS plastic protects your PDA from dirt, water, shock or impact.
■ Perfect for military, industrial, emergency services, outdoor sports, airline, automotive, hunting or other harsh environments.
■ Fits 99% of all PDA's.
■ Exterior stylus holder.
■ Adjustable Velcro® hand strap - easy use with gloves.
■ Unconditional lifetime guarantee.
■ $49.95 MSRP
catalog.qxp 3/26/2006 10:43 AM Page 13
PD
A C
AS
ES
:O
TT
ER
BO
X 2
60
0>
>
1514
T E C H N I C A L D ATA > >
FEATURES■ Universal fit to most popular PDAs■ Waterproof and dustproof while in use■ Replaceable screen membrane protects the
PDA touchscreen from scratches while provid-ing easy access to front panel buttons
■ Adjustable neoprene handstrap■ Clear bottom half for IR usability■ External stylus holder■ Polycarbonate & ABS Shell for maximum
strength and quality
ENVIRONMENTAL PROTECTIONDrop and Shock■ MIL-STD 810F, Method 516.5, Procedure 4
(Four foot drop to concrete, all surfaces, edges and corners)
Water Protection■ MIL-STD 810F, Method 512.4, Procedure 1,
ImmersionDust Intrusion■ MIL-STD 810F, Method 510.4, Procedure 1
(Blowing Dust)■ Meets Tech Spec SAE J575 for Dust Intrusion.
ADDITIONAL INFORMATIONOptional Accessories■ Belt Clip - heavy duty, full size belt clip for all
day use■ Hand Strap - provides a comfortable solution
for using and carrying your PDA■ Screen Replacement Kit - easily replaceable
screen extends the life of the Armor 2600 Case.
Internal Dimensions (Case only)■ 6.00" L x 3.375" W in x 1.125" D
(152 mm x 86 mm x 29 mm)External Dimensions (Case only)■ 6.50" L x 3.875" W in x 1.625" D
(165 mm x 98 mm x 41 mm)Weight (Case only)■ 0.5 lbs. (0.24 kg)
D E TA I L S > > A C C E S S O R I E S > >
Belt Clip$19.95 MSRP
ScreenReplacement Kit$12.95 MSRP
Replacement HandStrap$10.00 MSRP
External stylusholder
•
Recessed screen for PDA protection
•
Replaceable screenmembrane
•
High quality neoprene handstrap included
•
Lanyard loop for easycarrying
•
Clear bottom half for IRusability
•
catalog.qxp 3/26/2006 10:44 AM Page 15
O T T E R B O X 3 6 0 0 > > expandable PDA protection>>
16
PD
A C
AS
ES
:O
TT
ER
BO
X 3
60
0>
>
17
OtterBox 3600:Black w/Yellow Trim$99.95 MSRP
OtterBox 3600:Black $99.95 MSRP
■ Use any PDA while it’s in the Armor 3600.
■ OtterBox’s waterproof, crushproof, drop-proof
design economically ruggedizes your PDA and
protects your valuable data.
■ Protect your PDA from harsh environments: dirt, water, sand, snow, rain, humidity, shock and impact.
■ Through-the-Box connectivity allows water-proof cable connections to external GPS, power supplies, printers and more.
■ $99.95 MSRP
catalog.qxp 3/26/2006 10:44 AM Page 17
PD
A C
AS
ES
:O
TT
ER
BO
X 3
60
0>
>D E TA I L S > > A C C E S S O R I E S > > T E C H N I C A L D ATA > >
1918
Deep Box Kit withHandstrap$29.95 MSRP
Through-the-Box Connectivity Kit$39.95 MSRP
CF Small ScanPOD$49.95 MSRP
CF Large POD$49.95 MSRP
Belt Clip$19.95 MSRP
IR Window AccessPlug Kit $39.95 MSRP
Neck Lanyard$29.95 MSRP
FEATURES■ Universal fit to most popular PDA's■ Waterproof and dustproof while in-use■ Many accessories available to allow use of GPS, bar-
code readers, RFID readers, etc.■ Replaceable screen membrane protects the PDA touch
screen from scratches while providing easy access to front panel buttons
■ Impact resistant, flip-up screen cover■ Adjustable neoprene handstrap■ Clear top pod for IR usability■ Large enough to add extended batteries, optional PDA
sleeves and custom circuitry.■ Pod system for access to CF & SD slots and additional
expansion.■ Headphone/headset access■ Bottom hatch portal provides access to PDA's sync,
charge connectors & additional expansion.■ External stylus holder■ Compound latches for easy opening and secure closing
of the case■ Glass reinforced ABS shell for maximum strength and
durability■ Thermoplastic rubber overmolding for high grip and
impact absorption
ENVIRONMENTAL PROTECTIONDrop and Shock■ MIL-STD 810F, Method 516.5, Procedure 4 (Four foot
drop to concrete, all surfaces, edges and corners)Water Protection■ MIL-STD 810F, Method 512.4, Procedure 1, Immersion■ IP67 rating for water and dust intrusion. Water testing per
IEC 60529 Edition 2.1, Temporary Immersion (30 minute immersion at 1 meter depth)
Dust Intrusion■ MIL-STD 810F, Method 510.4, Procedure 1
(Blowing Dust)■ IP67 rating for water and dust intrusion. Dust
testing per IEC 60529 Edition 2.1, Section 13.4 (Blowing Dust)
ADDITIONAL INFORMATIONOptional Accessories■ Vehicle Mount - allows for secure vehicle mounting while
still allowing the case to be easily removed from mount.■ Neck Lanyard - provides a comfortable solution for using
and carrying your PDA.■ Serial Pod - Provides an RS232 and 4mm power
connection. Works well with external GPS, data-gathering devices, or temperature probes.
■ CF Medium Pod- Allows for the use of CF and SD bar- code readers, GPS, and other medium sized accessories.Available with and without scan window.
■ CF Large Pod - allows for the use of large CF, SD, or other top mounted accessories.
■ Screen Replacement Kit - allows for the replacement of the screen membrane.
■ Custom Screen Kits - allows for easier use of PDA's with raised front panel buttons. (See website for details.)
■ Belt Clip - full size belt clip for all day use.■ IR Window Access Plug Kit - access sync/charge, SD/CF
slots without removing your PDA from the case. IR window allows IR operation through the case.
■ Through-the Box-Connectivity - allows for multiple sizes of cables, power, sync, GPS, printers, etc. to pass through the case and connect to your PDA.
■ Deep-Box Kit - provides storage for dual expansion packs,extra batteries and deep model GPS Units. Has six mount-ing bosses for custom applications such as circuit boards and battery mounting.
■ POD box Connector - through-the-box POD allows cus-tomization of PDA connectivity. The end cap can be modified to fit multiple connections.
■ Rubber Plug Access Kit - sync/charge your PDA w/o removing it from case. Access to SD/CF slots. Pug included for top and bottom of case.
Specs (Case only)■ Dimensions: 8.5" L x 3.6" W in x 2.4" D
(215.9 mm x 91.44 mm x 60.96 mm)■ Weight: 1.1 lbs. (0.5 kg) Specs (with Deep Box)■ Dimensions: 8.5" L x 3.6" W in x 3" D
(215.9 mm x 91.44 mm x 76.2 mm)■ Weight: 1.3 lbs. (0.59 kg)
External stylus holder
Flip-up protective screen
Sure-grip rubber overmolding
Optional Deep Box Kit allows for use of such deepaccessories as dual PC cardsleeve or GPS sleeve
Optional Through- the-Box Connectivity Kitallows multiple sizes ofcables to exit case
Optional CompactFlash POD for bar-code readers, largeGPS receivers andother large acces-sories
Standard POD, with 9-pin connector and through-the-box power
•
•
•
•
•
•
•
Serial POD$49.95 MSRP
catalog.qxp 3/26/2006 10:45 AM Page 19
O T T E R B O X 4 6 0 0 > > rugged protection for tablet PCs>>
20
PC
CA
SE
S:
OT
TE
RB
OX
46
00
>>
21
■ Keep your Fujitsu™ Stylistic Tablet PC safe duringdaily use while protecting it from rain, dust and impact.
■ Designed for Fujitsu Stylistic ST4000 and ST5000 with 19.4" or 12.1" screens.
■ Access to all major functions through the case (power, PC card slot, etc.).
■ Ruggedize your Fujitsu Tablet PC for thousands less than rugged PCs on the market.
■ Accessible portson ST5000 series include 1 USB, audio, IEEE 1394, Ethernet, modem, power, PC card slot and Smart Card. Accessible ports on ST4000 series include power, Ethernet and modem.
■ $349.95 MSRP
NOTE: Does not fit Fujitsu LifeBook T4000 convertible style
Tablet PC.
OtterBox 4600:Black w/ Yellow Trim$349.95 MSRP
OtterBox 4600:Black $349.95 MSRP
catalog.qxp 3/26/2006 10:45 AM Page 21
Quick Turn Knobsfor POD Release Adjustable
Heavy-dutyCarrying Handle
●
AdjustableHand Strap
●
●
Easy access toPC and SmartCard Slots
Easy Access to Tablet PC Connections
Rubber Over-molding for Optimum Grip
Waterproof,BreathableGore™Membrane
External StylusHolderGlass Reinforced
Polycarbonate Shell
●
Flexible PVCScreen Membrane
●
AccessibleQuick-LaunchApplicationButtons
●
●
PC
CA
SE
S:
OT
TE
RB
OX
46
00
>>
A C C E S S O R I E S > > T E C H N I C A L D ATA > >
2322
●
D E TA I L S > >
●
ReplacementHandstrap$19.95 MSRP
Neckstrap$34.95 MSRP
Scan POD$49.95 MSRP
UniversalMounting Kit$89.95 MSRP
Lid ReplacementKit*$69.95 MSRPThis is just the toplid of the case
●
●
FEATURES■ Accommodates Fujitsu™ ST4000 and ST5000
series Tablet PC units with standard life (6 cell) battery or extended life (9 cell) battery Note: ST4000 with a 6 Cell Battery will not work in this case.
■ Available in high-visibility yellow (shown) or black
■ Glass reinforced Polycarbonate shell for maximum strength and durability
■ Thermoplastic rubber overmolding for high grip and impact absorption
■ Flexible PVC screen membrane for complete functionality and a full watertight seal
■ Molded rubber internal corner bumpers for impact absorption
■ Easy open POD system for access to the PC and Smart Card slots
■ Removable rubber side hatches provide access to commonly used Tablet PC connections
■ Gore™ membranes for heat and pressure dissipation
■ External stylus holder■ Compound latches for easy opening and
secure closing of the case
ENVIRONMENTAL PROTECTIONDrop and Shock■ MIL-STD 810F, Method 516.5, Procedure 4
Water Protection■ MIL-STD 810F, Method 512.4, Procedure 1,
Immersion■ IP67 rating for water and dust intrusion.
Water testing per IEC 60529 Edition 2.1,Temporary Immersion (30 minute immersion at 1 meter depth)
Dust Intrusion■ MIL-STD 810F, Method 510.4, Procedure 1
(Blowing Dust)
■ IP67 rating for water and dust intrusion. Dust testing per IEC 60529 Edition 2.1, Section 13.4 (Blowing Dust)
ADDITIONAL INFORMATIONAccessible Interfaces■ Type I or II PC card slot, Smart Card slot, USB 2.0
port, stereo headphone, microphone, LAN RJ-45,Modem RJ-11, DC-in are all accessible though the POD or rubber hatches
Accessible Application and Navigation Buttons■ Allows access to all quick launch application and
utility buttons on the front face of the tablet PCIncluded Accessories■ Adjustable, heavy-duty carrying handle■ Hand strap - adjustable neoprene cross strap
for comfortable all day useOptional Accessories■ Neck Lanyard - provides a comfortable solution
for using the tablet PC while standing■ Lid Replacement Kit - replaces entire lid of the case
including screen membrane.■ Scan POD - allows use of scanning devices and bar-
code readers while providing full environmental and impact protection. The POD has a hardened, scratch-resistant lens for the scanner to operate through, which allows for 99% transmission of the laser light.
■ Universal Mounting Kit - allows mounting of 4600 onto boats or any round or flat rail up to 2.0" (51 mm) wide.Includes a heavy-duty, shock-absorbing, adjustable mount which protects from vibration. Case is secure yet removable from mount. Includes mount and all hardware.
Dimensions (Case only)■ 15.66" x 11.05" x 2.65"
(397.6 mm x 280.5 mm x 67.3 mm)Weight (Case only)■ 2.90 lbs. (1.32 kg)
Available colors:BlackBlack with Yellow
catalog.qxp 3/26/2006 10:46 AM Page 23
24
O T T E R B O X R U G G E D L A P T O P C A S E S > > waterproof, drop-proof case>>P
C C
AS
ES
:O
TT
ER
BO
X R
UG
GE
D L
AP
TO
P C
AS
ES
>>
25
■ Available in three customizable sizes: small, medium and large.
■ Provides innovative water, dust and drop protec-tion; great for busy work environments and business travelers.
■ Case incorporates easy-open yet secure-close latches and lock for added security.
■ Access drives and ports through the case.
■ Carrying handle and shoulder strap included.
■ Laptop usable in case - simply pop open the lid and go to work.
7040 LargeLaptop Case$149.95 MSRP
7030 MediumLaptop Case $129.95 MSRP
7020 SmallLaptop Case $119.95 MSRP
catalog.qxp 3/26/2006 10:47 AM Page 25
Rugged, highimpactPolypropyleneconstruction
Rubber feet keepcase stable onuneven surfaceswhile protecting delicate surfacesfrom scratches
26
D E TA I L S > > OtterBox Rugged Laptop Case 7030 (shown) P
C C
AS
ES
:O
TT
ER
BO
X R
UG
GE
D L
AP
TO
P C
AS
ES
>>
T E C H N I C A L D ATA > >
27
Customizable, shock-absorbing,elastomer corner bumpers
●
●
■ 7020 Small Laptop Case■ 7030 Medium Laptop Case■ 7040 Large Laptop CaseSee Technical Data on pg. 27for sizes
Easy access to laptopdrives and common ports
●
Quick releasestrap for easylaptop removalthrough air-port security
●
Complete usability oflaptop while in case
Customizable internalconfiguration
●
●
Easy open compound latches
● Swiveling shoulderstrap mounts (strapincluded)
●
Ergonomiccarryinghandle
●
Automaticpressureequalization
●
FEATURES■ 7020 Small Case accommodates laptops with
screens smaller than14"■ 7030 Medium Case accommodates laptops with
14" - 15" screens■ 7040 Large Case accommodates laptops with
screens larger than 15"■ High impact Polypropylene construction for
maximum strength and durability■ Shock-absorbing, elastomer corner bumpers■ Automatic pressure equalization■ Complete dust, water and drop protection■ Ergonomic carrying handle and shoulder strap■ Compound latches for easy opening and
secure closing of the case■ Integrated lock for added security■ Available in black only
ADDITIONAL INFORMATIONAccessible Application and Navigation ButtonsAllows access to laptop drives and common portsOutside Dimensions (Case only)■ 7020: 14.125" x 13" x 2.875"
(358.8 mm x 330.2 mm x 73 mm)■ 7030: 16.375" x 14.5" x 3.375"
(416.9 mm x 368.3 mm x 85.7 mm)■ 7040: 18.375" x 15.5" x 4.375"
(446.7 mm x 393.7 mm x 111.1 mm)
Integratedlock foraddedsecurity
●
Lid and base lined withplush velcro for easyattachment of organizeraccessories
●
Access port for DC Powerand USB (back of case)
●
● ●
catalog.qxp 3/26/2006 10:47 AM Page 27
O T T E R B O X F O R i P o d > > innovative iPod protection>>
OtterBox for iPod mini $49.95 MSRP
OtterBox for iPod"Click Wheel" 20 GB $49.95 MSRP
OtterBox for iPod "ClickWheel" 30/40/60 GB &iPod photo models$49.95 MSRP
OtterBox for iPod nano$39.95 MSRP
OtterBox for iPod shuffle$29.95 MSRP
OT
TE
RB
OX
FO
R iP
od
>>
2928
OtterBox foriPod video $49.95 MSRP
■ Not just a waterproof case. Provides iPod protection against dirt, dust, mud, sand, and drops.
■ Engineered exclusively for Apple iPods.
■ Compact design for maximum versatility.
■ Access to controls through a fully waterproof, interactive membrane.
■ Allows for the use of any style headphone.
■ Convenient belt clip also provides headphone cable management.
■ Whether traveling, biking, swimming, hiking, kayaking or relaxing at the beach, the OtterBox for iPod is the ideal accessory for active lifestyles.
■ The most durable and protective sport case available.
catalog.qxp 3/26/2006 10:48 AM Page 29
OT
TE
RB
OX
FO
R iP
od
>>
● Interactive waterproof case
Usable with any headphonesthrough waterproof head-phone jack*
● Added drop protection through shock absorbing rubber liner
● Transparent hard plastic screen cover
Durable, easy-open latch
Removable belt clip ●
● Flexible membraneallows full accessto Click Wheel
Integrated headphone cable management
●
●
D E TA I L S > > OtterBox for iPod mini, 20 GB, 30/40/60 GB, photo and video models: common features
PatentsPending
30
Belt Clipincluded
ArmbandHigh-quality neo-prene armbandallows for hands-free carrying andeasy access toClick Membrane.Compatible withOtterBox for iPod20 GB, 30/40/60 GB,video, mini.$14.95 MSRP
Usable with any headphones throughwaterproof headphone jack*
●
A C C E S S O R I E S > >For OtterBox for iPod nano
Belt Clipincluded
Armband$14.95 MSRP
Interactive waterproof case
● Added drop protection through shock absorbing rubber liner
● Transparent hard plastic screen cover
● Flexible membraneallows full accessto Click Wheel
Usable with any headphones throughwaterproof headphone jack*
●
●
Durable, easy-open latch
Removable belt clip ●
Integrated headphone cable management
●
PatentsPending
●
*For customers using any OtterBox for iPod case in water,only use with headphones approved for underwater use.
*For customers using any OtterBox for iPod case in water,only use with headphones approved for underwater use.
●
●
D E TA I L S > > OtterBox for iPod nano>>
Neck LanyardIncluded
●Included, removableneck lanyard
< < A C C E S S O R I E SFor OtterBox iPod 20 GB, 30/40/60 GB,video, mini.
31
catalog.qxp 3/26/2006 10:49 AM Page 31
< < A C C E S S O R I E SFor OtterBox iPod shuffle
T E C H N I C A L D ATA > >
■ 903-01 OtterBox for iPod MiniDimensions: 5.15" x 2.6" x 1.0"
(131 mm x 66 mm x 25.4 mm)Material: Polycarbonate (PC)Fits the 4 GB and 6 GB iPod Mini Weighs 4.2oz. (0.12 kg)Waterproof up to 3' (1 m)
*Standard headphone jack on all models usable with any style headphones. For customers using any OtterBox for iPod case inwater, only use with headphones approved for underwater use.
■ 904-01 OtterBox for iPod 20GBDimensions: 5.7" x 3.0" x 1.0"
(144.8 mm x 76.2 mm x 25.4 mm)Material: Polycarbonate (PC)Fits the 20 GB Click Wheel iPodWeighs 5.3 oz. (0.15 kg)Waterproof up to 3' (1 m)
■ 907-01 OtterBox for iPod nano Dimensions: 5.15" x 2.265" x .66"
(130.8 mm x 57.5 mm x 16.8 mm)Material: Polycarbonate (PC)Designed to fit the iPod nanoWeighs 2.9 oz. (0.08 kg)Waterproof up to 3' (1 m)
■ 906-01 OtterBox for iPod Shuffle Dimensions: 4.97" x 1.64" x 0.78"
(126 mm x 41 mm x 20 mm)Material: Polycarbonate (PC)Designed to fit the iPod shuffleWeighs 2.9 oz. (0.08 kg)Waterproof up to 3' (1 m)
3332
ArmbandHigh-quality neo-prene armbandallows for hands-free carryingand easy accessto controls.$14.95 MSRP
Neck LanyardIncluded
●
Usable with any headphonesthrough waterproof headphonejack*
Rubber button pro-vides accessto batterycheck
● Transparent case shows iPod shuffle
Durable, easy-open latch●
●
● Added drop protection through shock- absorbing rubber liner
●●Shuffle play back position
visible through case
Included, removableneck lanyard
Flexible rubber button provides accessto basic shuffle functions
●
D E TA I L S > > OtterBox for iPod shuffle
PatentsPending
Usable with any headphones throughwaterproof headphone jack*
■ 908-01 OtterBox for iPod videoDimensions: 5.7" x 3.0" x 1.0"
(144.8 mm x 76.2 mm x 25.4 mm)Material: Polycarbonate (PC)Designed to fit the iPod videoWeighs 4.0 oz. (0.113 kg)Waterproof up to 3' (1 m)
OT
TE
RB
OX
FO
R iP
od
>>
*For customers using any OtterBox for iPod case in water,only use with headphones approved for underwater use.
●
■ 905-01 OtterBox for iPod 30/40/60 GBDimensions: 5.7" x 3" x 1.2"
(143 mm x 77 mm x 29 mm)Material: Polycarbonate (PC)Fits the 30, 40 or 60 GB Click Wheel iPod
and iPod photo modelsWeighs 5.9 oz. (0.17 kg)Waterproof up to 3' (1 m)
catalog.qxp 3/26/2006 10:49 AM Page 33
O T T E R B O X E S > > airtight, waterproof, crushproof boxes>>
34
OT
TE
RB
OX
ES
>>
35
1000 Series $11.49 MSRP
2000 Series $17.95 MSRP
2500 Series $20.49 MSRP
3000 Series $22.49 MSRP
9000 Series $22.49 MSRP
8000 Series $21.49 MSRP
3250 Series $25.49 MSRP
3500 Series $28.49 MSRP
■ When you’re exposed to the elements, make sure your valuables and equipment are safe from harm.
■ Otter Boxes are waterproof, crushproof and float.
■ Suggested Uses:
■ 1000 Series: pager, car keys, film & batteries, ID, business and credit cards, hotel room keys, small cell phone, med-ication, and travel sewing kit.
■ 2000 Series: wallet, cell phone, standard glasses, MP3 play-er, small digital camera, passport, survival kit, jewelry, PDA,and Game Boy Advance.
■ 2500 Series: small digital camera, sport sunglasses, cell phone, Minidisc Player.
■ 3000 Series: GPS, Gameboy, pocket mail unit, handheld PC,and insulin supplies.
■ 3250 Series: survival kit, portable harddrive, camera
■ 3500 Series: toiletries, range finders, ski goggles, save-a- dive kit.
■ 8000 Series: small digital camera, cell phone, GPS, and sunglasses. Belt clip provided for added convenience.
■ 9000 Series: cell phone, PLB (beacons), two-way radios, and sunglasses. Belt clip provided for added convenience.
catalog.qxp 3/26/2006 10:50 AM Page 35
High quality rope lanyard
Locking feature for absolute security.
Silicone gasket for long lasting, watertight seal.
Easy open latch
●
Convenient Beltcliponly available on 8000/9000 Series.
●
Compact size to fit in your pocket or backpack.
●
Coin slot vacuum release
●
All Otter Boxes come with a high quality,molded retail hang tag for a clean,organized in-store display.
●
●
●
OT
TE
RB
OX
ES
>>
C O L O R S > > T E C H N I C A L D ATA > >
3736
D E TA I L S > > 1000 Series
1000 SeriesOutside:4.837” x 3.682” x 1.652”Inside:4.003” x 2.488” x 1.293 "
2000 SeriesOutside:6.857” x 4.571” 1.827"Inside:6.000” x 3.374” x 1.293"
2500 SeriesOutside:6.857” x 4.571” x 3.589"Inside:6.000” x 3.374” x 3.054”
3000 SeriesOutside:8.813” x 5.175” x 2.080"Inside:7.884” x 3.973” x 1.547"
9000 SeriesOutside:3.354” x 4.542” x 7.663"Inside:2.072” x 2.959” x 7.180"
8000 SeriesOutside:3.354” x 4.542” x 5.921"Inside:2.182” x 3.080” x 5.438"
3250 SeriesOutside:8.813" x 5.175" x 3.081"Inside:7.884" x 3.973" x 2.546"
3500 SeriesOutside:8.813” x 5.175” x 4.179"Inside:7.884” x 3.973” x 3.644"
Features shown are common throughout the OtterBox line, except where notated.
D E TA I L S > > 8000 Series
Available inyellow, blue,black and clear. All colors alsoavailable with aclear lid.
catalog.qxp 3/26/2006 10:51 AM Page 37
C I G A R C A D DY > > crushproof travel humidor>>
38
CIG
AR
CA
DD
Y &
AC
CE
SS
OR
IES
:C
IGA
R C
AD
DY
>>
39
3540 15-Stick$29.95 MSRP
3140 2-Stick $21.49 MSRP
3400 5-Stick$24.49 MSRP
3240 10-Stick$27.49 MSRP
■ Keep your cigars fresh and moist in this airtight travel humidor.
■ The Cigar Caddy by OtterBoxTM protects your cigars in any environment. Safeguards your cigars in any type of luggage; even soft-sided. Great for protecting your cigars when golfing, boating, hunt-ing, fishing, or any outdoor adventure.
■ Keeps cigars moist and fresh for the perfect smoking experience.
■ Available in 2, 5, 10, and 15 stick sizes.
■ All sizes come with protective foam for individual cigar protection.
■ Humidification device provided on 5, 10, and 15 stick cigar cases maintains humidity for ideal cigar freshness.
catalog.qxp 3/26/2006 10:52 AM Page 39
Humidification device
Airtight foam siliconeseal
Layered foam
Lockable case ●
●
●
CIG
AR
CA
DD
Y &
AC
CE
SS
OR
IES
:C
IGA
R C
AD
DY
>>
H U M I D I F I C AT I O N > > T E C H N I C A L D ATA > >
4140
D E TA I L S > > 3140 2-Stick
3140 2-StickOutside:8.80" x 3.10" x 1.70"Inside:7.88" x 2.97" x 1.17"
3400 5-StickOutside:8.80" x 5.18" x 2.08"Inside:7.88" x 3.97" x 1.55"
3240 10-StickOutside:8.80" x 5.18" x 3.08"Inside:7.88" x 3.97" x 2.55"
3540 15-StickOutside:8.80" x 5.18" x 4.18"Inside:7.88" x 3.97" x 3.64"
Compact size to fit in your pocket or glovebox
High quality rope lanyard
Airtight foam silicone seal
●
Coin slot vacuum release(available on all models)
●
●
D E TA I L S > > 3540 15-Stick
Cigar Caddy is completely
airtight. Do not over-humidifyyour cigars. To humidify, add a
few drops of fluid: either pro-
pylene glycol mix or distilled
water is recommended. If cigars
are properly humidified when
placed in the case, you may not
need to immediately add fluid to
humidification device.
No humidification device pro-
vided in the 2-stick Cigar Caddy.
●
●
catalog.qxp 3/26/2006 10:52 AM Page 41
CIG
AR
CA
DD
Y &
AC
CE
SS
OR
EIS
:ZIPPO
CAR
GO
CASE B
Y OTTER
BO
X>
>
43
Z I P P O C A R G O C A S E B Y O T T E R B O X > > airplane approved Zippo carrying case>>
42
■ Only DOT approved carrying case for Zippo lighters aboard airplanes.
■ Waterproof, Crushproof
■ For detailed information please refer to the OtterBox 1000 Series presented on pages 34-37 of this catalog.
■ DOT APPROVAL: Lighter in this packaging con-forms to DOT-E 14194 and may be transported in checked baggage by domestic passenger aircraft.
■ $12.95 MSRP
Zippo inside
catalog.qxp 3/26/2006 10:53 AM Page 43